Gebruiksaanwijzing /service van het product ATLAS 67 CS4 van de fabrikant Barco
Ga naar pagina of 111
R5976255 user’s manual A TLAS 67 CS4 AND A TLAS 84 CS4.
R5976255 This i s the User’ s Manual for Atlas 6 7 CS4 and Atla s 84 CS4. Title: A TLAS 67 CS4 an d A TLAS 84 C S4 User’s Manu al ID-no.: R5976255 Date: 2001- 03 main is sue update chapter 1 new c.
Trademarks Brand and produ ct names men tioned in this manual m ay be trademarks, regis tered trademarks or copyrigh ts of their res pective h olders. All brand an d product nam es menti oned in this ma nual serve as comments or exam ples and are not to be u nderstood as advertis ing for the products or their m anufacturers.
Revisio n sheet To: ! Barco Control Rooms GmbH An der Ros sweid 5 • D-76229 Karl sruh e • Germany Phone (49) ( 721) 62 01-0 • Fax (49) (72 1) 6201- 298 E-mail docu.
Contents 1 Introduction ................................................................................................................. ............... 1-1 1.1 The A TLAS CS4 s eries...................................................................
5.1.16 Comm unication Connections ................................................................................ 5-14 5.1.17 RS232 in / RS232 ou t ............................................................................................ 5-14 5.1.
9 Installation Mode ............................................................................................................ ............ 9-1 9.1 Input Slots .........................................................................................
13 Configu ring Notes ........................................................................................................... ....... 13-1 13.1 Floor Space An d Maintenance Area .....................................................................
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-1 1 Introduction The wide variety of new possibilitie s to combine different pr ojector and interface technologies to create cust omer specific Atlas Display Walls has lead to the creation of a n ew and more concise nome nclat ure .
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-2 1.1 The A TLAS CS4 series This User’s Manual refers to the models from the A TL A S 67 CS4 an d A TLAS 84 CS4 series . Since operation an d properties of A TLAS 67 CS4 and of A TL A S 84 CS4 are quite similar, th e expression A TLAS CS4 refers to both of them.
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-3 1.2 How This M anual Is Organ i z e d This manu al is div ided into s ixteen chapte rs: ! Prelimin ary Rem arks explains the stru cture of the manual itself and the used typog raphic styles and sym bols. Safety inform ation is prov ided concerni ng the operation of sy stems from BARCO.
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-4 1.3 Sty les And Symbols The typographic styles and the s ymbols used in this docu ment have the following mea ning: Helveti ca bol d Labels , menus and bu ttons are prin ted in the Helvetic a bold fo nt. Condense d Links to both other chapters of this manual and to sites in the Internet are printed condensed .
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-5 1.4 Safety Info rmation This section desc ribes safety precautions which must be observ ed wh en installing a product from BARC O.
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-6 B. Pow er cord wi th ANSI 73.11 pl ug: The wires of the power cord are colored in accordance w ith the following code: Green/yellow: Ground White: Neutral Black: Line (live) ! Do not allow anything to rest on the power cord.
R59762 55 A TLA S CS4 (2 00 1-0 3) 1-7 On Servicing Do not att empt to service t his devi ce yo ursel f, as ope ning o r re movin g cove rs ma y exp ose you to dangerous voltage potential and risk of electric shock! Refer all proj ector service to a qualified BARCO service center.
R59762 55 A TLA S CS4 (2 00 1-0 3) 2-1 2 Abbreviated Summ a r y This chapter provides a summary of the sy stem components and ch aracteristics..
R59762 55 A TLA S CS4 (2 00 1-0 3) 2-2 2.1 Design A TLAS CS4 is a modular rear projection system for the construction of large Display Wall s. T he technologies u sed guarantee the bes t optical properties for hi gh-quality pres entation of information with very simple inte gration into higher-le vel systems.
R59762 55 A TLA S CS4 (2 00 1-0 3) 2-3 2.2 Propert ies of A TLA S CS4 ATLAS CS4 can be us ed as one large monitor w ith a screen diag onal of 67 or 84 inch es.
R59762 55 A TLA S CS4 (2 00 1-0 3) 3-1 3 Design and Functio n This chapter provides a techn ical description of the equ ipment listing the fundamental characteris- tics and functional principles. K nowledge of this sectio n is not absolutel y essential for operatio n.
R59762 55 A TLA S CS4 (2 00 1-0 3) 3-2 3.1 Projection Unit Atlas 67 CS4 The Atlas 67 CS 4 Unit has a display area of 1068 millimeters high and 1335 millimeters wide. T he resulting sc reen diagonal of 1710 m illimeters correspon ds to approxim ately 67 inches.
R59762 55 A TLA S CS4 (2 00 1-0 3) 3-3 Atlas 84 CS4 The Atlas 84 CS 4 Unit has a display area of 1320 millimeters high and 1650 millimeters wide. T he resulting sc reen diagonal of 2113 m illimeters correspon ds to approxim ately 84 inches.
R59762 55 A TLA S CS4 (2 00 1-0 3) 3-4 The Atlas CS4 pr ojection modules consi sts of the follo wing components: 1 lamp module 2 illumination unit 3 proj ec tion unit 4 deflection mirror 5 Atlas struc.
R59762 55 A TLA S CS4 (2 00 1-0 3) 3-5 A TLAS CS4 has been designed f or rear access of in terfaces and exchange of consumables (lamp module, filters..
R59762 55 A TLA S CS4 (2 00 1-0 3) 3-6 3.1.1 Lamp Modul e The lam p module generates the light for t he subsequen t projection. The lam p (100 Watt UHP (Ul- tra High Perform ance) lamp) has an operation t ime of 8000 hou rs.
R59762 55 A TLA S CS4 (2 00 1-03) 3- 7 3.1.4 Screen Module The im age is generated in the s creen . It consists of the optical screen and a f r ame with which the screen is exactly mounted onto th e Atlas Structure. ! Fresnel Le ns The screen consists of a Fresnel lens and a Front Element Screen.
R59762 55 A TLA S CS4 (2 00 1-03) 4- 1 4 Location and Func t i o n s of Co ntr ol This chapter provides an overvi ew about the controls of A TL AS CS4.
R59762 55 A TLA S CS4 (2 00 1-03) 4- 2 4.1 Control Unit 4.1.1 Power, source and communic a t ion connections [3] 1 Pow er switc h 1 = on, 0 = of f 2 Pow er in put autorangi ng from 100VA C to 240VA C .
R59762 55 A TLA S CS4 (2 00 1-03) 4- 3 13 Projector m ode indication indicates the st atus of the projector Light off: power switch is not p ressed Red light: power switch is pressed, p rojector in st.
R59762 55 A TLA S CS4 (2 00 1-03) 4- 4 4.2 Control Panel Terminology The projector can be controlled by the local keypad or by the remote control unit ( RCU ) 4.2.1 Local key pad The local keypad [1] is located on the back side of the A TL AS CS4 (exp lanati on se e 4.
R59762 55 A TLA S CS4 (2 00 1-03) 4- 5 This remote control is used for source selectio n, control, adaptation and set up. It includes auto- matic storing of th e picture controls (brightn ess, sharpness .
R59762 55 A TLA S CS4 (2 00 1-03) 4- 6 16 Cursor Ke ys ( on RCU ) or '' and ' - ' keys ( curso r keys) on th e local keypad to m ake menu selections when in th e adjustment m ode or to zoom/focus when the direct access is active.
R59762 55 A TLA S CS4 (2 00 1-03) 5- 7 5 Connections This chapter explains th e various interfaces of A TLA S CS4..
R59762 55 A TLA S CS4 (2 00 1-03) 5- 8 5.1 Pow er connectio n 5.1.1 AC Power (mains) cord conn e ct ion I 0 RC RS 232 IN RS 232 OUT Comm. Port IEE 13 94 TRI G MOU S E VIDEO S-VID EO SDI SD O R G B H/C.
R59762 55 A TLA S CS4 (2 00 1-03) 5- 9 5.1.5 Lamp Run Time The operat ion time of th e lamp is 8000 hou rs. T he total hours of operations are count ed and can be display ed on th e screen. The total lifetime of the lamp for a safe operatio n at high and constant brightness i s about 8000 hours .
R59762 55 A TLA S CS4 (2 00 1-03) 5-10 5.1.8 Input Connections A TLAS CS4 has multiple input connections for all common RGB and video sources. The inp ut can be selected either manually or au tomatically.
R59762 55 A TLA S CS4 (2 00 1-03) 5-11 5.1.10 5-cable Input Slot (s lot 1) Slot 1 h as 5 BNC input t erminals. The following signals can be connected to these BNC connectors : Connector n a me R G B H.
R59762 55 A TLA S CS4 (2 00 1-03) 5-12 Possible ind ication: RGB [HS&V S] RGB analog signals, separate syn c is horizontal and vertical sync. RGB CS RGB anal og signals, s eparate syn c is com posite syn c. RGB CV RGB anal og signals, s eparate sync is com posite video or tri- level sync.
R59762 55 A TLA S CS4 (2 00 1-03) 5-13 5.1.12 Video Input Input signal: Composi te video sign als from a VCR, OFF air signal decoder, etc.. . 1 x BNC or cinch 1.0Vpp ± 3 dB No loop th ro ugh. Slot 3 selection : Press the digit bu tton 3 on the RCU or th e local keypa d .
R59762 55 A TLA S CS4 (2 00 1-03) 5-14 5.1.16 Communication Connect ions The following communication connections are available: ! RS232 in / RS232 out. ! Comm port f o r comm unication with peripheral (sw itchable between PPM and R C5) ! RC for remote cable connection with the RCU.
R59762 55 A TLA S CS4 (2 00 1-03) 5-15 5.1.19 TRIG Output 5 V output voltage to trigger an external device (max. 10mA). This voltage is available when the projector is on . 5.1.20 MOUSE Mouse output to be con nected to the mouse input of a co m puter.
R59762 55 A TLA S CS4 (2 00 1-03) 6-16 6 Con trolling The projector can be controlled w ith ! the RCU ! the hardwired RCU (cable is not included) ! the local keypad Controlling the projector with the RCU and th e hardwired RCU is equal.
R59762 55 A TLA S CS4 (2 00 1-03) 6-17 6.1 RCU used in a hardw ired c o n f igu ration Connect ions: ! Plug one end of the remote cable in the conn ector on the bottom of the RCU ! Plug th e second si de in the connect or in the f ront panel of the projector labell ed 'RC' .
R59762 55 A TLA S CS4 (2 00 1-03) 6-18 6.2 How to use the RCU? Point the front of the RCU directly at t he screen. When us ing the w irele ss rem o te control, m ake sure you are within the effective op- erating distance (30m , 100ft in a straight line).
R59762 55 A TLA S CS4 (2 00 1-03) 6-19 6.3 Project or add ress The projector' s address may be set t o any value betw een 0 and 255 (s ee 'Chang e projector address' in ch apter 'Service m ode). When the address is set, the projector can be controlled now b y the RCU for address es betw een 0 and 9.
R59762 55 A TLA S CS4 (2 00 1-03) 6-20 Color Saturation Color sat ur ation is only active for Video and S-Video. A djust the color intensity of the pictu re. Use the + button for richer colors . Use the - button for lighter colors. Tint C ont rol Tint is on l y act ive for Video and S- Video wh en using th e NTSC 4.
R59762 55 A TLA S CS4 (2 00 1-03) 6-21 The Pause key When the Pause key is pressed, the image projection is stopped, a blue screen will be displayed and the projector remains with full po w er for immediate restart. The sound is not interrupted. The display on front of the proj ector will show a P.
R59762 55 A TLA S CS4 (2 00 1-03) 7- 1 7 Start Up of the Adj u s t m ent M ode All source parameters , picture and audio tuning , and geometry are made while in the 'Adjustment Mode' . P ress the ADJ UST or ENT ER key to enter the 'Adju stment mode' .
R59762 55 A TLA S CS4 (2 00 1-03) 7- 2 7.1 Adjustment mo de You are now in the 'Adjust m ent Mode' . ! The cursor key ( RCU ) or '+ or '-' ke ys (loc al keypad ) are used to mak e menu selections and also for a djust ments. ! The ENTER and EXIT keys are used to mov e forward and backw ard through the menu structure.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 1 8 Random Access A d j u st ment M ode To start up the Random Acces s Adjustment Mode: ! push the cursor key up or down to high lig ht 'Random Acce ss' .
R59762 55 A TLA S CS4 (2 00 1-03) 8- 2 8.1 File Service Before using a new s ource, a correct file has to be installed. The projector's memory contains a list of files corres ponding to the most used sou rces. When the new source corresponds with one of these files, the file can be loaded and saved for future use.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 3 To load a file: ! Push the cu rsor key up or down to select the best fittin g file. ! Pre ss ENTER to select. A conf irm Load file men u will be displayed with the newly created file and the one on which the n ew file is based on .
R59762 55 A TLA S CS4 (2 00 1-03) 8- 4 method 2: ! Pre ss ENTER to activate the digits ! Push the cu rsor key right or left to select the ch anging digit. ! Push the cu rsor key up or down to scroll to desired digit. ! When fi nished press ENTER to confirm.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 5 Options ! Source Number The source number of a non-active source can be change d to any other s ource number. This makes it possible to create a f ile for future source numbers. ! Clamp Po sition Clamping determ ines the black level of the s ignal.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 6 8.1.3 Rename To change the name of a selected f ile: ! Push the cu rsor key up or down to highlight 'Ren ame' . ! Pre ss ENTER . ! The Rename sel ection menu will be displayed. ! Push the cu rsor key up or down to select a file name.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 7 8.1.5 Delete To delete a selected file out of the list o f files: ! Push the cu rsor key up or down to highlight 'Del ete' . ! Pre ss ENTER . ! The delet e sel ection men u will be d isplayed. ! Push the cu rsor key up or down to select a file name.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 8 8.2 Picture T unin g ! Push the cu rsor key up or down to highlight 'Pict ure Tuni ng' . ! Pre ss ENTER to select.
R59762 55 A TLA S CS4 (2 00 1-03) 8- 9 To a dju st Custom Balance , handle as follows: ! Push the cu rsor key up or down to highlight 'Custom Bal ance' . ! Pre ss ENTER to select. ! Push the cu rsor key up or down to adjus t red and push the cursor key lef t or right to adjust blu e (range 0 to 2.
R59762 55 A TLA S CS4 (2 00 1-03) 8-10 8.2.7 Input Balance Before starting the Input Balance f unction , ge ner ate a signal with d o minant bl ack and wh ite areas.
R59762 55 A TLA S CS4 (2 00 1-03) 8-11 8.2.10 Mute To stop th e sound reprodu ction. ! Push the cu rsor key up or down to highlight 'Mute' . ! Pre ss ENTER to toggle between [ on ] or [ off ] 8.2.11 Fade Determine where the s ound signals wi ll be reproduced.
R59762 55 A TLA S CS4 (2 00 1-03) 8-12 8.3 Geometr y To start up the Geometr y functio ns: ! Push the cu rsor key up or down to highlight 'Geometry' . ! Pre ss ENTER to select. ! The geometr y menu will be displa yed. The following adjustm ents are possible: horizontal and vertical image sh ift.
R59762 55 A TLA S CS4 (2 00 1-03) 8-13 To start up the size adjustment: ! Push the cu rsor key up or down to highlight 'Size' . ! Pre ss ENTER to select. ! Push the cu rsor key up or down to size the imag e in a vertical direction. Push the cursor k ey left or right to size the im a ge in a horizontal direction.
R59762 55 A TLA S CS4 (2 00 1-03) 9- 1 9 Installation Mode To start up the Instal lation Mode , push the cursor key up or down to hi ghli ght 'I nstallat ion Mode' and then pres s ENTER .
R59762 55 A TLA S CS4 (2 00 1-03) 9- 2 9.1 Input Slots The input configuration of the variable inputs is sho wn in the input slot s menu . T o v i e w o r t o change the input configu ration: ! Push the cu rsor key up or down to highlight 'Input Slots' .
R59762 55 A TLA S CS4 (2 00 1-03) 9- 3 9.2 800 Perip heral Output mod ule selection When a RCVDS05 is connected to th e projector, the ty pe of output modu le of this RCVDS05 ha s to be defin ed in the 800 peripheral menu . The type of output module can be: ! standard ou tput module or ! 5 cable out put modu le.
R59762 55 A TLA S CS4 (2 00 1-03) 9- 4 9.3 Configuration The configuration of the projector can be set up as f ollows: ! Push the cu rsor key up or down to highlight 'Conf igurati on' . ! Pre ss ENTER to select. ! The Confi gur ation menu w ill be display ed.
R59762 55 A TLA S CS4 (2 00 1-03) 9- 5 9.4 OSD colo r (On-Scr een Dis p l a y) The highl ighted items on the menus can be displayed in red, green or y el low. To change this color setting: ! Push the cu rsor key up or down to highlight 'OSD co lor' .
R59762 55 A TLA S CS4 (2 00 1-03) 9- 6 9.5 Internal Pattern s The project or is equipped w ith different in ternal patterns which can be u sed for m easurement pu r- poses. To select an internal pattern, handle as follo w: ! Push the cu rsor key up or down to highlight 'Int ernal Pat terns' .
R59762 55 A TLA S CS4 (2 00 1-03) 9- 7 9.6 No Signal If th ere is no sign al connected to the projector, the backgrou nd color can be black or blu e and the projector can shu tdown after a certain time. To change the backg round color handle as follows: ! Push the cu rsor key up or down to highlight 'No si gn al' .
R59762 55 A TLA S CS4 (2 00 1-03) 10-1 10 Service Mode To start up the Service Mode : ! push the cursor key up or down to high lig ht 'Ser vice' ! press ENTER . Som e item s in the Service mod e are password protected (wh en the password fu nction is active).
R59762 55 A TLA S CS4 (2 00 1-03) 10-2 10.1 Identificat ion To d is pla y th e Identif icati on scr een : ! Push the cu rsor key up or down to highlight 'Ident ifi cation' .
R59762 55 A TLA S CS4 (2 00 1-03) 10-3 10.2 Change Passw ord This ite m is password protect ed wh en the passw ord strap is in stalled. The passwor d function is e nabled when the password strap on the controller module is installed. Consult an authorized Barco service technician to change the strap position.
R59762 55 A TLA S CS4 (2 00 1-03) 10-4 10.3 Change Language To c hange t he la ngua ge o f the c ontr ol so ft ware: ! Push the cu rsor key up or down to highlight 'Cha nge Languag e' . ! Pre ss ENTER to d isplay the Change Languag e menu . ! Push the cu rsor key up or down to high light the desi red language.
R59762 55 A TLA S CS4 (2 00 1-03) 10-5 10.4 Change Pro jector Address Every projector requires an individu al address betw een 0 and 255. This address can be softw are installed. To change that addres s: ! Push the cu rsor key up or down to highlight 'Cha nge Pr oject or Address' .
R59762 55 A TLA S CS4 (2 00 1-03) 10-6 10.5 Change Baud rate PC The communi cation speed between projector and com puter, e.g. PC or MAC, h as 8 possible speeds. The baud rate speed can be s oftware set. Han dle as follows: ! Push the cu rsor key up or down to highlight 'Cha nge B audrat e PC' .
R59762 55 A TLA S CS4 (2 00 1-03) 10-7 10.6 Reset Lamp Ru ntime Reset lamp run time is onl y allowed when a new lamp is installed . When Reset La mp Run Time is selected in t he Service Mode selection menu, the follo wing warn- ing will be disp layed : Risk of electrical shock.
R59762 55 A TLA S CS4 (2 00 1-03) 10-8 10.7 BARCO log o The BARCO logo can be added to th e image, in ov erlay or on a back ground, on any place on the screen. To add the BARCO lo go or to change a setting in the BARCO logo menu : ! Push the cu rsor key up or down to highlight 'B ARCO logo' .
R59762 55 A TLA S CS4 (2 00 1-03) 10-9 10.8 Uniformit y Changing th ese settings may serious ly affect the perform ance of the projector When Uniformity is selected in the Servi ce Mode sel ection me nu , the following w arni ng will be display ed : Uniform ity is res erved to qualified s ervice pers onnel.
R59762 55 A TLA S CS4 (2 00 1-03) 10-10 10.9 Pr eset Input Balance Changing th ese settings may serious ly affect the perform ance of the projector. When Preset Input Balanc e is selec ted in the Service Mo de sel ect i on m enu , the foll o w ing war ning will be di splayed : Preset Input Bal ance is reserved to qualified service person nel.
R59762 55 A TLA S CS4 (2 00 1-03) 10-11 10.10 I2C Diagnosis. Gives an overview of the correct work ing of the I²C controlled IC 's. Highl ight I2 C diagnosi s by pus hin g the c urso r ke y up or down and press ENTER to displa y the overvi ew.
R59762 55 A TLA S CS4 (2 00 1-03) 11-1 11 Maintenance and S e r vi cing A TLAS CS4 requires very little maintenance and servicing. Maintenance operations are neverthe- less necess ary at regular i ntervals to gu arantee good operation al perform a nce.
R59762 55 A TLA S CS4 (2 00 1-03) 11-2 11.1 Cleaning of Screens 11.1.1 General Screens consist of single or double screen elem e nts. Each screen element has a delicate optical screen surface stru cture dedicated to its f u nctionality. The optical surface can easily be damaged if the screen is h andled incorrectly.
R59762 55 A TLA S CS4 (2 00 1-03) 11-3 11.2 Replacing Both the filter pad and the lam p module are accessible from the rear s ide. 1 2 Figure 11-1 Position of filt er pad and lamp module 1 filter pad .
R59762 55 A TLA S CS4 (2 00 1-03) 11-4 11.2.1 Replacing the Lamp Module The lam p module must be replaced after an operatin g period of 8000 hours or if a fault occurs ear- lier. The hot l amp is at hi gh pressure. Do not open the lamp hou sing befor e the lamp has cooled dow n! Wait at least about 10 minutes after swi tching t o standby.
R59762 55 A TLA S CS4 (2 00 1-03) 11-5 Inserting a L amp Modu le Never remov e t he cover of the lamp housing wi th the equi pment switche d on. The following des cription applies if the lamp has already been removed as described above.
R59762 55 A TLA S CS4 (2 00 1-03) 11-6 11.2.2 Replacing the Filter Pad The filter pad must be replaced regularly. The operating period of a filter pad dep ends on the q ual- ity of t he suppl ied air. ! Go to standb y mode by pressing STDBY on the RCU ! For cooling do wn th e lamp, wait 10 minutes.
R59762 55 A TLA S CS4 (2 00 1-03) 12-1 12 T echnical Data This chapte r provides tabu lar overviews about t he technical det ails of A TLAS CS4 ..
R59762 55 A TLA S CS4 (2 00 1-03) 12-2 12.1 General Dat a character isti c specifi cation Atlas 67 CS4 specifi cation Atlas 84 CS4 Dimension s screen w idth scree n heig ht total depth 1335mm | 52,5in 1068mm | 42 in 929.5mm | 36.6in 1650mm | 65in 1320mm | 52in 1212mm | 47.
R59762 55 A TLA S CS4 (2 00 1-03) 12-3 12.2 Techn ical Data of Opt ical S y s t em character isti c specifi cation A TLAS CS4 n ative SXGA- resolution, 5:4, 1280×1 024pix els colors 1 6.
R59762 55 A TLA S CS4 (2 00 1-03) 12-4 12.3 Techn ical Data Of Electric a l S ystem character isti c specifi cation AC power suppl y 100VAC .... 240VA C mains fr equenc y 50.
R59762 55 A TLA S CS4 (2 00 1-03) 12-5 12.4 Interface s 12.4.1 24V Interface This interface allows switching th e projector on and off wi thou t using the RCU or the local keypad . Switching is don e by applying a v oltage (24V). The interface is m ade accessible via a two pole connector m ounted at the bottom of the cov er.
R59762 55 A TLA S CS4 (2 00 1-03) 12-6 12.4.3 Slot 2: Computer inp ut/Monit o r output 1 11 6 15 10 5 1 Red 6 gro und 11 loop thro ugh to monit or 2 Green 7 ground 12 loop thro ugh to monito r 3 Blue 8 ground 13 HSYNC / CSY NC 4 Green 9 loop thro ugh to monit or 14 VSYNC 5 ground 10 gr ound 15 loop thro ugh to mo nito r Table 12-5 12.
R59762 55 A TLA S CS4 (2 00 1-03) 12-7 12.4.6 Slot 5: Serial digi tal Input / Se r ia l digital Output 1 2 1 Signal 2 Shield SDI BNC in put, 75 Ω terminated SDO BNC out put, ou tput impedance 75 Ω.
R59762 55 A TLA S CS4 (2 00 1-03) 12-8 12.5 Parts Li st 12.5.1 Optional Parts order No. designat ion R9829960 Executive Re mote Contro l R9827890 VS05 Table 12-9 12.
R59762 55 A TLA S CS4 (2 00 1-03) 12-9 12.6 Addresses Feel free to contact us if you have any fu rther questions! ! Barco Control Rooms GmbH An der Ros sweid 5 • D-76229 Karl sruh e • Germany Phone (49) ( 721) 6201-0 • Fa× (49) ( 721) 6201- 298 E-mail info.
R59762 55 A TLA S CS4 (2 00 1-03) 13-1 13 Configuri ng Notes A number of des ign and ergonomic con ditions must be considered wh en pla nning th e installation of A TL AS CS4. In addition to m ounting dimensions, the following sections also include anthropo- technical requirem ents which must be observed in a specific application.
R59762 55 A TLA S CS4 (2 00 1-03) 13-2 13.1 Floor S pace And Maintena n c e Area Sufficient floor s pace and maintenance area must be av ailable when installing A TL AS CS4 Floor Spa ce The floor space must h ave a sufficient load carry i ng capacity and be suff icie ntly flat (according to DIN 18202).
R59762 55 A TLA S CS4 (2 00 1-03) 13-3 A TLAS 84 CS4 front side top 1650 154.5 1035 Figure 13-2 Position of the feet of A TLAS 84 CS4 (All dimension s measured in millime ters!) Maintenance Area The floor space for a A tlas Unit is calculated from the basic area of the structure.
R59762 55 A TLA S CS4 (2 00 1-03) 13-4 13.2 Overall Heigh t The installation room must be sufficiently high . Sufficient space (recommended > 100 millime- ters) must be provided above the Atlas Units.
R59762 55 A TLA S CS4 (2 00 1-03) 13-5 A TLAS 84 CS4 finis hed wi ndow 10 0 100 100 1320 1320 between 366 and 1287,5 mm finis hed ce iling finis hed fl oor 2 x 1650 +4 5 1650 Figure 13-4 Mounting dimensi ons of A TLAS 84 CS4 (All dimension s measured in millime ters!) The depth of t he A TL AS 84 CS4 W ALL is 1212mm.
R59762 55 A TLA S CS4 (2 00 1-03) 13-6 13.3 Viewing Distance an d Ang l e When planing the installatio n of A TL AS CS4, anthropotech nical factors such as the hum an field of vision must be considered in add ition to design requirements.
R59762 55 A TLA S CS4 (2 00 1-03) 13-7 The screen of th e A TLAS CS4 can be v iewed at angles greater than 45 degrees w ithout problems. The vertical viewing ang le has been des igned such that there is no differen ce whether the observer is standing or sitting.
R59762 55 A TLA S CS4 (2 00 1-03) 13-8 13.4 Room Ventil ation The electrical pow er consumption of typically 220 Watts per illum i nation unit can be used as a measure for the heat dis sipation of A TLA S CS4 into the room. It is favorable to pass fresh a nd clean air through ventilation ducts in the floor below th e dark boxes.
R59762 55 A TLA S CS4 (2 00 1-03) 14-1 14 T roubleshooting When fau lts occur w ith A TLAS CS4 which are not described below please contact BARCO..
R59762 55 A TLA S CS4 (2 00 1-03) 14-2 14.1 Faults Faults caus e/step s no disp lay: la mp no t igni ted and fa n of t he illumination u nit not running The equipm ent is not connected to pow er sup- ply . It must be su pplied with suitabl e voltage (see 12.
R59762 55 A TLA S CS4 (2 00 1-03) 14-3 14.2 Contact 14.2.1 Hot Line Feel free to contact us if you have any fu rther questions! ! Barco Control Rooms GmbH An der Ros sweid 5 • D-76229 Karl sruh e • Germany Phone (49) ( 721) 6201-0 • Fa× (49) ( 721) 6201- 298 E-mail info.
R59762 55 A TLA S CS4 (2 00 1-03) 15-1 15 Appendix A : Stand a r d S ource Set Up Files Name: name of file, contains the settings Resolution: image resolution, when followed by ...I means interlaced. FVERT/Hz: vertical frame frequen cy of the source FHOR/ kHz: horizont al fre que ncy o f the so urce .
R59762 55 A TLA S CS4 (2 00 1-03) 15-2 name resolut ion Fvert/ Hz Fhor/kHz Fpi x/MHz ptot pact ltot lact MAC_LC 640 × 480 66,619 34,975 31,338 896 640 525 480 MAC_POR 640 × 870 74,996 68,846 57,280 .
R59762 55 A TLA S CS4 (2 00 1-03) 15-3 name resolut ion Fvert/ Hz Fhor/kHz Fpi x/MHz ptot pact ltot lact XGA_75 1024 × 768 75,78 1 61,080 86,000 1408 1024 806 768 XGA75_GS 1024 × 768 74,534 59,701 7.
R59762 55 A TLA S CS4 (2 00 1-03) 16-4 16 Appendix B: Sourc e N umbers 81 - 86 A nd 91 - 96.
R59762 55 A TLA S CS4 (2 00 1-03) 16-5 16.1 Pr ojector without any 800 p e riphe ral connected. The source numbers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additio nal ad- justment f ile can be created for these source num ber s. This file can contain dif ferent settings.
R59762 55 A TLA S CS4 (2 00 1-03) 16-6 16.2 Project or wit h a 800 perip h e r a l connect ed. 16.2.1 Source numbers 91 - 99. The source numbers 91 - 99 do not correspo nd to ph ysical inputs. An additio nal adjust ment file can be created f or these sou rce numbers (sou rce numbers of the 800 peripheral ).
Een belangrijk punt na aankoop van elk apparaat Barco ATLAS 67 CS4 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco ATLAS 67 CS4 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco ATLAS 67 CS4 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco ATLAS 67 CS4 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco ATLAS 67 CS4 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco ATLAS 67 CS4 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco ATLAS 67 CS4 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco ATLAS 67 CS4 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
