Gebruiksaanwijzing /service van het product MFGD 2320 van de fabrikant Barco
Ga naar pagina of 36
MFGD 2320 User Manual B4100336 / 02 December 2002 © 2002 BARCO NV . All rights reserved BarcoView Theodoor Sevenslaan 106 8500 Kortrijk, Belgium Phone: +32(0)56 23 32 44 Fax: +32(0)56 23 33 74 E-mail: sales.
Content s Safety instructions ............................................................................................... 5 1. Overview ......................................................................................................... 6 1.1.
3.7. Selecting inputs ...................................................................................... 22 T o enter the Inputs menu: ........................................................................... 22 Y ou can select the following input selection settings: .
User manual MFGD 2320 3 Read the safety and operating instructions before operating the apparatus. Retain safety and operating instructions for future reference. Adhere to all warnings on the apparatus and in the operating instructions manual. Follow all instructions for operation and use.
User manual MFGD 2320 4 1. OVERVIEW 1.1. Introduction The MFGD 2320, BARCO’s 20” 2 megapixel grayscale LCD display , guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality .
User manual MFGD 2320 5 Best resolution The optimum and recommended resolution is 1600 x 1200 or 1200 x 1600 (if the Portrait Accelerator option is inst alled). The recommended refresh rate is 60 Hz. Would you have trouble selecting a proper display setting in Windows, please refer to the T roubleshooting section further .
User manual MFGD 2320 6 1 2 Side (3) USB downstream connector (4) Control wheel for navigating through the on-screen display (OSD) menus and changing values in the menus 4 3 1.3. Controls and connectors Front (1) Ambient Light Compensation (ALC) sensor (2) Power LED - The LED is off when the display is of f.
User manual MFGD 2320 7 Rear (5) Digital DVI (video and data) input (6) D15 (VGA) video connector (7) V ertical sync input (8) Composite / Horizontal sync input (9) Composite video input (10) USB down.
User manual MFGD 2320 8 2. INST ALLA TION 2.1. Precautions • Keep your original p ackaging. It is designed for this display and is the ideal protection during transport. • A void reflections in the flat panel to reduce eye strain. • Place the display on a strong and st able t able or desk.
User manual MFGD 2320 9 2.3. Portrait or landscape position Y ou can change the orientation of the panel at any time, but it is more convenient to select landscape or portrait orientation before connecting the cables. T o change the panel orientation: 1 S t and at the front side of the panel and t ake the p anel at both sides.
User manual MFGD 2320 10 T o connect analog video & sync signals on BNC: Connect the video & sync output of the signal source to the video and sync inputs (9), (8) and (7) of the display . The inputs accept the following signals: • Video with sep arate horizontal and vertical sync.
User manual MFGD 2320 1 1 3 Connect the other end of the power cord to a grounded power outlet. 4 Route the cable so that it enters the connector compartment at the place where the cover is bulged. 2.5. Routing the signal cables After connecting all cables, fix them in the cable tie at the rear of the connector compartment.
User manual MFGD 2320 12 2.6. Using the USB hub T o use the display in a configuration controlled by MediCal Pro, connect the display to the PC using the USB connector . Also, the USB interface inside the display allows you to connect USB devices, such as a keyboard, mouse or digital camera, to the display .
User manual MFGD 2320 13 3. OPERA TION 3.1. Switching to st and-by position When the display is on and no on-screen menus are visible, press the control wheel (4) for a few seconds to switch the display in stand-by . When the display is in stand-by , press or turn the control wheel to switch it back on.
User manual MFGD 2320 14 • T o browse or scroll through the menus on the current level, turn the wheel clockwise or counterclockwise. • T o enter into a menu or move to a lower level of the menu structure, turn the control wheel to select the desired menu.
User manual MFGD 2320 15 3.3. Using the Autoset* functions * Not in DVI mode The Autoset menu provides a set of functions to adjust the display automatically .
User manual MFGD 2320 16 2 Click the control wheel. The Autoset menu appears. AUTOSET Full Autoset Automatic Geometry Automatic Phase Automatic Gain EXIT 3 T urn the control wheel to select the function you wish to execute. 4 Execute the function as described below .
User manual MFGD 2320 17 2 Click the control wheel to enter the Video Contrast or V ideo Brightness menu. Y ou can change the current setting manually or select the calibrated position. To change Video Contrast or Video Brightness manually: 1 T urn the control wheel to select the manual Contrast (Brightness) control.
User manual MFGD 2320 18 3.5. Setting the Luminance value With this function, the backlight value is stabilized by the I-Guard sensor . The value you enter is the target backlight luminance, ex- pressed in Cd/m². Proceed as follows: 1 In the main menu, turn the control wheel to select the Luminance menu.
User manual MFGD 2320 19 2 Click the control wheel. The Adjustments menu appears. ADJUSTMENTS Geometry Phase* EXIT * Not in DVI mode 3 T urn the control wheel to select the adjustment menu you wish to enter: Geometry or Phase. 4 Click the control wheel to enter the menu.
User manual MFGD 2320 20 Phase adjustments* * Not in DVI mode Required test pattern T o obtain good result s, it is necessary to have a good image on which to perform the functions. For the Phase adjustments, the p attern should cont ain sharp black- white transitions, like a line pattern or characters.
User manual MFGD 2320 21 2 Click the control wheel. The Input Selection control appears. 3 T urn the wheel to select the desired input setting. 4 Click the wheel to activate the input selection and return to the main menu. You can select the following input selection settings: Auto .
User manual MFGD 2320 22 3 T urn the wheel to select the desired menu item. 4 Perform the settings as described below . The Settings menu contains the following items: DPMS .......................... Click the control wheel to switch on/off the automatic power saving system (DPMS) Power LED .
User manual MFGD 2320 23 MFGD 2320 MAIN MENU Autoset Video Contrast* Video Brightness* Luminance Adjustments Input Selection Auto Settings Scan Mode Information EXIT * Not in DVI mode 2 Click the control wheel. The Scan Mode menu appears. 3 T urn the wheel to select the desired menu item.
User manual MFGD 2320 24 MFGD 2320 MAIN MENU Autoset Video Contrast Video Brightness Luminance Adjustments Input Selection Auto Settings Scan Mode Information EXIT 2 Click the control wheel. The Information menu appears. Y ou can select to view General information or Current Input Format information.
User manual MFGD 2320 25 4. ADV ANCED FUNCTIONS 4.1. About this chapter Import ant The functions described in this chapter are intended for trained service staf f only! Improper use of these functions may disorder the display . BARCO cannot be held responsible for the results or damage caused by improper use of these functions.
User manual MFGD 2320 26 4.2. Advanced functions in the Adjustment s menu Ambient Light Compensation Ambient Light Compensation is sometimes abbreviated to ALC. See Introduction. The Ambient Light Compensation menu cont ains the following items: Min ALC .
User manual MFGD 2320 27 4.3. Advanced functions in the Settings menu The Settings menu contains the following advanced functions: Lookup Table The display contains a number of factory-defined and user-defined Lookup T ables (LUT s). T urn the control wheel to select a LUT .
User manual MFGD 2320 28 G->Y ........................ The Green video signal from the imaging board is used as luminance value to drive the RGB subpixels of the panel equally . B->Y ........................ The Blue video signal from the imaging board is used as luminance value to drive the RGB subpixels of the panel equally .
User manual MFGD 2320 29 OSD position With the OSD function you can select where on the screen the OSD menu text will appear . Y ou can select between center position, top left, top right, bottom left or bottom right.
User manual MFGD 2320 30 Firmware The Firmware information menu contains the following items: Boot Code V ersion ....... The version of the internal boot code Run Code V ersion ........ The version of the internal run code CPLD Code V ersion ..... The version of the internal CPLD code FPGA V ersion .
User manual MFGD 2320 31 It may be possible that dust particles have entered the display and are stuck to the rear of the glass. We recommend to let this cleaning procedure be done in a BARCO service center .
User manual MFGD 2320 32 Information: The display contains a special memory chip that cont ains information about the display's scanning capabilities. When Windows st arts up, it reads the contents from this memory and present s a number of display settings in the Display Properties control panel, based on this informa- tion.
User manual MFGD 2320 33 General • Pixel arrangement: sub-pixel vertical stripes • Pixel pitch: 0.255 mm x 0.255 mm (0.010" x 0.010") • Panel contrast ratio: 1000:1 (typical) • Panel.
User manual MFGD 2320 34 • T ermination: 75 Ohm Sync • Connector type: BNC / D15 • Input s provided: HS/CS and VS • Sync input volt age: - VS input: 700 mV to 4 V - HS/CS input: 500 mV to 4V -.
User manual MFGD 2320 35 70 watts (max.) APPROVALS CE, IEC 60950, UL 60950, CAN/CSA C22.2 No. 950-95 (cUL) DIMENSIONS (W X H X D) P: 385 x 585 x 250 mm (In perpendicular vertical position, highest position, tilt = 0°, swivel = 0°) NET WEIGHT 13.
Een belangrijk punt na aankoop van elk apparaat Barco MFGD 2320 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco MFGD 2320 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco MFGD 2320 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco MFGD 2320 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco MFGD 2320 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco MFGD 2320 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco MFGD 2320 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco MFGD 2320 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
