Gebruiksaanwijzing /service van het product SLM R12+ van de fabrikant Barco
Ga naar pagina of 159
SLM R1 2+ Owner’s manual R9010171 R5976654/05 27/01/2005.
Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: events@barco.com Visit us at the web: www.barco.com P r i n t e di nB e l g i u m.
Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose.
.
Table of con tents T ABLE OF CONTENTS 1 . S a f e t y I n s t r u c t i o n s .................................................................................................. 5 1 . 1 W a r n i n g s .............................. ...................
Table of con tents 6 . 2 P a s s w o r d ...................... ............... .................. ............... ................... ........................... ......... 5 9 6.3 Menus on Local LC D Display . . . . ....................... ..........
Table of con tents 9 . S e r v i c e M o d e...................................................................................................... 1 0 9 9 . 1 B u i l t - u p ................ ................... .................................. ....
Table of con tents 4 R5976654 SLM R12+ 27/01/2005.
1. Safety Inst ructions 1. SAFETY INSTRUCTIONS 1.1 W arnings T o prevent personnel injury The customer should never attempt to disassemble the lamp c asing or to dispose of the lamp casi ng other than by returning it to BARCO.
1. Safety Instruction s Extra Safety manual Read also safety instructions in separate manual ( R597 6125 ). 6 R5976654 SLM R12+ 27/01/2005.
2. Packaging and Di mensions 2. P ACKAGING AND DIMENSIONS Overview • Projector Packaging • Box Content • Lamp Packaging • Lens Packaging • Projector Dimensions 2.1 Projector Packag ing W ay of Packaging The projector is packed in a carton box.
2. Packaging a nd Dimension s Save this carton box , it can be used to repack the lamp when yo u ever have to transport your projector . 2.4 Lens Packaging W ay of Packaging Lenses are supplied as a n individual item.
2. Packaging and Di mensions Image 2-3 Side view di mensions 2.5.2 Projector Dimens ions (Inclusive Dust Fi lters) Projector Front V iew The value of the projector dimensions is indicated in mm.
2. Packaging a nd Dimension s Image 2-5 Projector top vie w dimensions Projector Side V iew The value of the projector dimensions is indicated in mm. Conversion to inches: 24.
3. Installation Gu idelines 3. INST ALLA TION GUIDELINES The engines are non sealed versions. 3.1 General W ARNING : Before installing t he projector , read first the safety instru ctions.
3. Installa tion Guide lines Screens are rated by how much light they reflect (or transmit i n the case of rear projection systems) given a determined amount of light projected toward them. Th e ‘GAIN’ of a screen is the te rm used. Front and rear screens are both rated in terms of gain.
3. Installation Gu idelines T able mounted, front projection, second way . Screen PD B Floor Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen TOP VIEW SW Floor Table/Top s.
3. Installa tion Guide lines Ceiling mounted, front projection, second way . Screen PD B Ceiling Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen CEILING VIEW SW Ceiling Ceiling/Top side facing ceiling A CD = SH/2 + B + A - 554mm Image 3-4 Ceiling mounted p rojector 3.
3. Installation Gu idelines A Image 3-5 Safety a rea around the proj ector R5976654 SLM R12+ 27/01/200 5 15.
3. Installa tion Guide lines 3.4 Projector tilting T urning around the projection axes (E) FRONT VIEW (D)Lamp Axis 15 ° 15 ° (C) Start point Image 3-6 Tilting diagram A Allowed Projector Tilting Are.
3. Installation Gu idelines 3.5.1 Access to the Lamp Unit. What has to be done T o access the lamp casing, a side panel has to be removed. Necessary t ools A flatblade screwdri ver of 5 mm R e m o v i n gt h es i d ep a n e l 1. Turn with a screwdriver the side panel lock screw (A) a quarter turn counter clockwise.
3. Installa tion Guide lines Installin g the lam p unit 1. Remo ve the lock nut (B) on the 3 spacer screws (A). B A Image 3-9 2. Line up the lamp unit guides (A) with the guides on the projector base (B) and push the unit into the frame until it fits.
3. Installation Gu idelines A A A Image 3-1 1 Lamp unit fixation 3.5.3 Reinstal ling the Side Panel What has to be done After the new lamp unit has been installed, the side panel has to be remounted. Necessary t ools A flatblade screwdri ver of 5 mm Reinstall ing the side panel 1.
3. Installa tion Guide lines B Image 3- 14 Locking side panel 3.6 Realignment of the lamp in its reflector W ARNING : As the p rojector has to be open ed, this procedure h as to be pe rformed by qu alified service te ch- nician.
3. Installation Gu idelines Image 3- 15 Lamp adjustment access 3. Start up the adjustment mode and select Service . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 3-2 4.
3. Installa tion Guide lines A Image 3-16 Lamp Z-Axis alignment (For mer lamp house) B A Image 3-17 Lamp Z-Axis alig nment (Universal lamp h ouse) 6. Slowly turn the screw B (image 3-16, , image 3-17, using an Alle nk e yo f3m m ,al i t t l ec l o c k w i s eu n t i lt h em a x i m u mv a l u eo ft h e Z-AXIS indication in the lamp menu is reached.
3. Installation Gu idelines 3.7 Lenses Overview • Lenses • Lens selection • Lens formulas • Lens Installation • Cleaning the lens 3.7.1 Lenses A vailable lenses TLD(1.6–2.0:1) R9840670 TLD(2.0–2.8:1) R9840680 TLD(2.8–5.0:1) R9840690 TLD(1.
3. Installa tion Guide lines Formulas for TLD lenses Metric form ulas (meter) Inch formulas (inch) TLD(0.8:1) PD=0.77xSW+0.05 PD=0.77SW+1.97 TLD(1.2:1) PD=1.1 1xSW-0.01 PD=1.1 1xSW-0.39 TLD(1.6–2.0:1) PD min =1.47xSW-0.09 PD max =1.85xSW-0.13 PD min =1.
3. Installation Gu idelines Image 3- 19 Mounted Lens Caution: On a table mounted projector , hold the projector when pushing the lens into the lens block to avoid sliding off from the table.
3. Installa tion Guide lines 1 2 A B Image 3- 20 Battery cover re moval 2. Plug in t he battery (9 V battery - typ e E-block or equivalent) onto the battery contact plate (A). A B Image 3- 21 Battery connect ion 3. Place the bat tery into the lower compartment (B) (image 3-21).
3. Installation Gu idelines 3.9 Stacking Projectors What is possible? Up to 3 projectors can be stacked on each other without using extra tools or accessories. How to stack? Handle as follow: 1. Put the second pro jector on the first one so that base plate of t he second projector matches with the rigging socket of the first projector .
3. Installa tion Guide lines A Image 3- 25 Mounting the secur ity chain 5. G uide hook and cable around the carry handle and guide it around the carry handle of the upper projector . Image 3- 26 Mounting the securit y hook 6. Hoo k it in the foreseen hole B in the base plate of th e upper projector .
3. Installation Gu idelines C B B Image 3- 27 Mounting the security hook (deta il) How to open a secured rigging poi nt? 1. Push the ring (A) of the first projector downwards and hold it in that position. A B Image 3- 28 Opening t he rigging soc kets 2.
3. Installa tion Guide lines 3.10 Rigging points and Accessories Clamps Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints.
3. Installation Gu idelines Image 3- 32 Opening t he rigging cl amp 2. Hoo k the clamp around the tube. The trigger automatically shuts the clamp. 3. Close the fixation handle and secure it by turning the hand screw .
3. Installa tion Guide lines 32 R5976654 SLM R12+ 27/01/2005.
4. Connecti ons 4. CONNECTIONS Overview • Power connection • Switching on • Switching to standby • Switching off • Input Source Connections • Communication Connections 4.1 Power connection AC Power cord connection Use the supplied power cord to connect your pro jector to the wall outlet.
4. Connecti ons Lamp run time indica tion while run ning When the total run time of the lamp is 30 hours less then 1000, the following warning message will be displayed for 1 minute. This warning message will be repeated every 30 min utes. Pre ss EXIT to remove the message before the minute is over .
4. Connecti ons 4.3 Switching to standby H o wt os w i t c ht os t a n d b y ? 1. Press Standby to switch the proje ctor to standby . 4.4 Switching off How to swi tch off the pro jector? 1. Press first Standby . 2. Let cool dow n the projector until the fans stop blowing, at least 15 min.
4. Connecti ons slot 1 RGB/Component slot 2 Video slot 3 not used slot 4 not used When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module has to be connected to slot 1 of the projector . T o switch the project or in the 5-cable mode see "Fixed slot (slot 1 & 2)", page 37.
4. Connecti ons 4.5.4 Fixed slot (slo t 1 & 2) Where to find? Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second projector . Within the installation mode it is po ssible to setup the input for 5 cable or DVI (PanelLink).
4. Connecti ons 3. Press ENTER . 4. Press the cursor key ↑ or ↓ to select Input Slots . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 4-5 5.
4. Connecti ons How to connect ? 1. Con nect the output of your SDI source to t he input BNC of the SDI input. OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TR.
4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by I.
4. Connecti ons OUT IN On R9840450 HD SDI DIGI TAL MODULE P R P B On COMM PO RT Ethernet RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote.
4. Connecti ons 6. Push the c ursor key ↑ or ↓ to select the third or fourth slot. INPUT SLOTS Slot Module type [config] 1. RGB-SS [CV] 2. RGB-SOG 3. SDI 4. SDI ______________ 1. DVI OUTPUT [DVI input] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 4-9 7.
4. Connecti ons 45678 9 123 45678 9 1 Pin Number Pin Number DB9 Female Connector DB9 Female Connector 23 Image 4-8 Make a Custom Null Modem Cable 2. Use the Custom Nu ll Modem Cable to connect the COM 800 port o f the master-projector to the ’T o Switcher ’ port on the frontside of the COM 800 Splitter .
4. Connecti ons To next COMM 800 S p litte r COM 800 Splitter 1 (R9827941) Front Slave 1 TO SWITC HER COMM 800 Splitter To Slave 2 To Slave 3 Custom Null Modem Cable TO IR R ECEIVER Front Slave 4 To Slave 5 To Slave 6 TO SWITC HER COMM 800 Splitter TO IR R ECEIVER Back TO PRO J.
4. Connecti ons 4.6.3 Communication wi th peripheral s What is possible wit h an R CVDS05 connected. • Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS’s are linked via the expansion module.
4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by I.
5. Getting Started 5. GETTING ST ARTED 5.1 RCU & Local keypad How controlling t he projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the loca l keypad ? The local keypad is located on the input side of the projector .
5. Getting Star ted 1 Barco key selection key , to get direct access to the lens adjustment menus. 2 ADJ ADJUST key , to enter or exit the adjustment mode. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0a n d9 .
5. Getting Started The projector mode indication lamp will be green - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ENTER 32a PAUSE - + PHASE FREEZ TEXT EXIT ADJ STBY SHARPNESS TINT COLOR BRIGHTNESS CONTRAST .
5. Getting Star ted ERROR DMD out of operating temperature range Automatic shutdown is activated Menu 5-1 5.4 Quick Set Up A djustments Overview • Quick Language Change • Quick Lens Adjustment • Quick On Screen Color change 5.
5. Getting Started 6. Push the c ursor key ↑ or ↓ to highlight the desired language. CHANGE LANGUAGE ENGLISH Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-4 Note: For the moment, only English is available. 5.4.2 Quick Lens Adjustme nt Quick zoom/focus adj ustment 1.
5. Getting Star ted Press the selection key * to switch to a nother pattern. D ifferent patterns are available. 5.4.3 Quick On Screen Color cha nge What can be done ? For quick change of the on-screen color of the highlighted items. The highlighted items on the menus can be displayed in red, green or yellow .
5. Getting Started 5.5 Using the RCU Pointing to the ref lective scr een 1. Point the front of the RCU to the reflective screen surface. Ceiling Screen IR sensor RCU Image 5-5 Hardwired Remote I nput 1. Plug one end of the remote cable in the connector on the bottom of the RCU.
5. Getting Star ted Hardwired to the XLR input 1. Plug one end of the remote cable in the connector on the bottom of the RCU 2. Plug the other end in the connector in the fro nt panel of the projector labelled Hardwired CTRL2 .
5. Getting Started ADDR ADJ EX IT STBY MUTE TEXT BRIGHTNESS - + - + - + - + SHARPNES S - + TINT COLOR CONTRAST FREEZ 0 9 7 8 6 5 4 3 2 1 ENTER RCU Front of projector IR sensor ADDR ADJ EX IT STBY MUTE.
5. Getting Star ted 5.6.2 Displaying and Pro gramming addresses Displaying the P rojector Address o n the Screen. 1. Press Add ress key (recessed key on the RCU) with a pencil.
5. Getting Started The Stand-by Ke y When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by . This situation is used when a projection stop is planned for a longer period.
5. Getting Star ted 58 R5976654 SLM R12+ 27/01/2005.
6. St art up of the Adju stment mode 6 . S T A R TU PO FT H EA D J U S T M E N TM O D E 6.1 Start up Possible paths There are 3 possible paths to follow once in the Adjustment mode. They are : • Installation - Installation should be selected if a new input modu le is installed or a new source is connected to an existing input module.
6. St art up of the Adj ustment mode When your password is correct, you gain access to the selected item. When your password is wrong. The error message Inva lid passw ord is displayed on the screen. Press EXIT to con tinue and to return to the adjustment menu.
7. Rand om Access Adjustment Mode 7. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow •P i c t u r e S e r v i c e s • Picture T uning • Geometry • ScenergiX • Picture in Picture (PiP) • Save Changes 7.
7. Rand om Access Adjustment Mode Start up 1. Push the cursor key ↑ or ↓ to highlight Rando m Access . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-1 2.
7. Rand om Access Adjustment Mode file loading can be done automatically (see "File Option s", page 71). Files with a ~ in front of the file name are temporary files.
7. Rand om Access Adjustment Mode The Load menu displays the corresponding files depending on the installed filter . LOAD FILE FILTER LIST [All] F ilename Src resolution video525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ---------------------------- Active file : Video525.
7. Rand om Access Adjustment Mode 7.2.5 Edit File 7.2.5.1 St art up How to start up the Edi t menu ? T o start up the ED IT menu : 1. Push the c ursor key ↑ or ↓ to highlight Edit . FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-9 2.
7. Rand om Access Adjustment Mode 3. Enter directly with the nu meric keys on the RCU or local keypad the new value. How to change a setting wi th the cursor keys? 1. Push the c ursor key ↑ or ↓ to highlight an item. The color of the selected item will change.
7. Rand om Access Adjustment Mode How to install the cor rect settings for the options in t he Edit file menu. EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp delay 0 Clamp width 10 F.
7. Rand om Access Adjustment Mode Film mode detection: [On] or [Off] Detects in the [on] mode if the source is film or video. Use the ENTER key to toggle between [on] or [off] When enabled, the hardware looks for tell-tale signs of 3:2 or 2:2 pull-down sequ ences.
7. Rand om Access Adjustment Mode The Rename selection menu will be displayed. RENAME FILE F ilename Src resolution video525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ------------------------------- Active file : Video525.c50 Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 7-14 3.
7. Rand om Access Adjustment Mode The Copy selection menu will be displayed. COPY FILE F ilename Src resolution video525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ------------------------------- Active file : Video525.c50 Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 7-17 3.
7. Rand om Access Adjustment Mode 7.2.8 Delet e Start up and delete T o delete a selected file out of the list of files : 1. Push the c ursor key ↑ or ↓ to highlight Delete . FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-20 2.
7. Rand om Access Adjustment Mode 2. Press ENTER . The option selection menu will be displayed. FILE OPTIONS FILE SORT [NAME] FILE LOAD [AUTOMATIC] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-24 File Sort 1. Press ENTER to tog gle between [name] and [index].
7. Rand om Access Adjustment Mode 7.3.2 Color T emperature A vailable Color temperatures • Projector white • Broadcast 3200K • Film 5400K • Video 6500K • Computer 9300K • Custom balance Start Up 1. Push the c ursor key ↑ or ↓ to highlight Color T empe rature .
7. Rand om Access Adjustment Mode Changing the gamma val ue 1. Push the c ursor key ↑ or ↓ to highlight Gamma . PICTURE TUNING COLOR TEMPERATURE GAMMA COLOR SPACE NOISE REDUCTION INPUT BALANCE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-29 2.
7. Rand om Access Adjustment Mode Projector Maximum color space EBU European Broadcasting Union. This organization defines a European standard. SMPTE American standard Custom The use can define the x and y coordinates for red, g reen and blue which forms the corners of the color space.
7. Rand om Access Adjustment Mode 7.3.6.1 Input Balance for RGB input signals Step to be taken for RGB i nput signals T o adjust the input balance, the following steps have to be executed in the following order : 1. Start with the black balance. 2. Continue with the white balance .
7. Rand om Access Adjustment Mode 4. Adjust th e contrast to a maximum value until the green noise becomes visible in the white areas and return one step. 5. Adjust with the cursor keys ↑ or ↓ or ← or → until the red respectively blue noise becomes visible in t he white areas and return one step.
7. Rand om Access Adjustment Mode 7.3.6.3 Returning to the factory defa ults How to return to the fact ory defaults 1. Push the c ursor key ↑ or ↓ to highlight Default . INPUT BALANCE BLACK BALANCE WHITE BALANCE DEFAULT Select with ↑ or ↓ then <ENTER> <EXIT> to return Adjust red with ↑ or ↓ blue with ← or → Menu 7-38 2.
7. Rand om Access Adjustment Mode 7.4.2 Geometry start up Start up 1. Push the curso r key ↑ or ↓ to highlight Geometry . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-39 2.
7. Rand om Access Adjustment Mode How to sh ift the ima ge ? 1. Push the c ursor key ↑ or ↓ to highlight Shift . GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [4:3] OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-41 2.
7. Rand om Access Adjustment Mode B V ertical size adjustment Size adjustment 1. Push the c ursor key ↑ or ↓ to highlight Size . GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [4:3] OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-42 2.
7. Rand om Access Adjustment Mode While the bar scale w indow is on the screen, press ENTER to change the value indication to an input field. Enter the desired value w ith the numeric keys on the RCU. Alw ays 3 digits should be entered . T o toggle + to - or vice versa, use the up or down arro w key .
7. Rand om Access Adjustment Mode 2. Press ENTER to display the blanking menu. BLANKING TOP BOTTOM LEFT RIGHT Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-45 3. Push the c ursor key ↑ or ↓ to highlight the desired blanking.
7. Rand om Access Adjustment Mode The Geometry Options menu will be displayed. GEOMETRY OPTIONS Use the same side keystone correction for all files ? [YES] <ENTER> to toggle <EXIT> to return Menu 7-48 3. Press ENTER to to ggle between [YES] or [NO].
7. Rand om Access Adjustment Mode Image 7-8 Why Soft Edge? What is the Basic Principal of Scene rgiX ? The principle of edge blending is archived by linear modulation of the light output in the overlap zo ne so that the light output in that zone equals the light output of the rest of the image.
7. Rand om Access Adjustment Mode 2. Press EN TER to select. 3. Push the c ursor key ↑ or ↓ to highlight Status . SCENERGIX STATUS [ON] - size - TOP BOTTOM LEFT RIGHT - black level - LEVEL Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-50 4.
7. Rand om Access Adjustment Mode Example Horizontal resolution source : 1600 pixels horizontal resolution projector 1 & 2 : 1024 pixe ls Overlap : 100 pixels T otal horizontal scree n size in pix.
7. Rand om Access Adjustment Mode Lstart projector 2 = Lstart projector 1 + (1200 – 620) 7.5.7 ScenergiX size adjustment What can be done with the ScenergiX size menu? Within this menu the width of the blending zone is set up. How to adjust the size? Only accessible when the status is in the ON position.
7. Rand om Access Adjustment Mode Image 7-13 Width set up for project or 1 Image 7-14 Width set up for project or 2 7.5.8 Adjusting the bl ack level of the images Why For dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining image (excluding the overlap zone).
7. Rand om Access Adjustment Mode A C B 12 13 11 R G B RGB Image 1 Image 2 Image 7- 15 Black level adju stment 7.6 Picture in Picture ( PiP) Overview • Introduction to PiP • Picture in Picture activation • Picture in Picture source • Position of Picture in Picture window • Set up of the Quick Selection 7.
7. Rand om Access Adjustment Mode Image 7- 16 Possible p osition for P iP 7.6.2 Picture in Pictu re activation How to activate P IP? 1. Push the cursor key ↑ or ↓ to highlight PIP .
7. Rand om Access Adjustment Mode 7.6.3 Picture in Pict ure source Which source disp layed in PiP 1. Push the c ursor key ↑ or ↓ to highlight Source . PIP STATUS [ON] SOURCE 01 POSITION [Top-Left] QUICK SELECT [OFF] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-55 2.
7. Rand om Access Adjustment Mode 7.7 Save Changes What can be done The system saves automatically the changes every x minutes. W hen you want to save it qu icker , use the save changes option. How to sa ve 1. Push the cursor key ↑ or ↓ to highlight Save Changes .
7. Rand om Access Adjustment Mode 94 R5976654 SLM R12+ 27/01/2005.
8. Installa tion Mode 8. INST ALLA TION MODE Overview • Start up of the Installation mode • Input Slots • 800 peripheral • Source Switching •N o S i g n a l • Contrast Enhancement • Convergence • Configuration • Lens Adjustment • Quick Access Keys •O S D • Internal Patterns 8.
8. Inst allation Mo de T o view or the change the input configurati on. 1. Push the cursor key ↑ or ↓ to highlight Input Slots . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL .
8. Installa tion Mode If no 800 peripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 c onnected or RCVDS is switched off. When a 800 peripheral is connected to the projector, the input slots a re not accessible with the cursor key to toggle their function.
8. Inst allation Mo de Defining the communi cation protocol. 1. Push the cursor key ↑ or ↓ to highlight 800 Peripheral . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST.
8. Installa tion Mode 8.4 Source Switching Switching from one sou rce to another . T o minimize undesired effects when switching from one source to another one can use the S eamless switching mode, beside Seam- less switching there is a choice between several effects which render the transitions more enjoyable.
8. Inst allation Mo de 8.5.1 Changing the Background Col or How to change ? 1. Push the cursor key ↑ or ↓ to highlight No signal . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNA.
8. Installa tion Mode 4. Press ENTER to toggle betwe en [On] or [Off]. 8.5.3 Changing the Shutdown T ime Range The shutdown time can be set between 5 min. and 60 min. How to change ? T o set up the shutdown time, handle as follow: 1. Push the curso r key ↑ or ↓ to highlight No Signal .
8. Inst allation Mo de T o change the Contrast Enhancement value 1. Push the cursor key ↑ or ↓ to highlight C ontrast Enhancement . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGN.
8. Installa tion Mode 2. Press EN TER to select. The following message will be displayed : “Conver gence is reserved to qualified service personnel.” WARNING CONVERGENCE is reserved to qualified service personnel <ENTER> to accept <EXIT> to return Menu 8-22 8.
8. Inst allation Mo de How to start up. 1. Push the c ursor key ↑ or ↓ to highlight Lens . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 8-24 2.
8. Installa tion Mode 3. Push the c ursor key ↑ or ↓ to shift the image up or down and ← or → to shift the image left or right. 4. W hen finished, press EXIT to g o to the lens adjustment menu or press ENTER to go to the zoom/foc us function. Press the selection key * to switch to a nother pattern.
8. Inst allation Mo de How to get an overvi ew . 1. Push the c ursor key ↑ or ↓ to highlight Quick Access Keys . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCE.
8. Installa tion Mode 3. Push the c ursor key ↑ or ↓ to highlight Highlighted item color . OSD HIGHLIGHT ITEM COLOR [red] MENU POSITION [Default] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 8-33 4. Press ENTER to toggle between Y ellow, Red and Blue.
8. Inst allation Mo de Av a i l a b l e p a t t e r n s - Outline -H a t c h - C olor bars - Multiburst - C hecker board - Pa ge Char - Alpha numeric char How to se lect an intern al patterns? 1. Push the cursor key ↑ or ↓ to highlight Intern al Patterns .
9. Service Mode 9. SER VICE MODE 9.1 Built-up Built-up The service menu is built-up in two parts which are connected together with the ’mo re’ item. If the desire d item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu.
9. Service Mode The following items will be displayed: • T ype of projector: SLM R12+ • Software version • Network module: yes • Proj. address: T o change the address of the proj ector , see &.
9. Service Mode The different levels are: • owner •u s e r • guest Depending on your password level some password protected items are accessible and others not. The owner (which has the highest level) can set up via the ’Access control list’ the accessibility of the dif ferent items.
9. Service Mode 6. Cha nge the position of S2. How to change the password ? 1. Push the c ursor key ↑ or ↓ to highlight Change Password . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE.
9. Service Mode 2. Press ENTER to display the Change password menu. Note: Only possible when Ow ner . CHANGE PASSWORD Enter new password OWNER 0000 USER 0000 GUEST 0000 ACCESS CONTROL LIST Select with ↑ or ↓ then <ENTER> Reprogram with ↓ , ↑ , ← or → or numeric keys <ENTER> to confirm <EXIT> to return Menu 9-9 3.
9. Service Mode 9.5 Changing Language Start up 1. Push the c ursor key ↑ or ↓ to highlight Change Language . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-11 2.
9. Service Mode 3. Push the c ursor key ↑ or ↓ to highlight Projector address . 4. Press ENTER to ac tivate. The first digit will be highlighted. 5. Rep rogram the address with ↑ , ↓ , ← , → keys Use the ↑ or ↓ key to select a new value, use the ← or → key to select a new digit.
9. Service Mode 9.7.1 Start Up of the Serial Communicati on Start up 1. Push the c ursor key ↑ or ↓ to highlight Serial communication . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE.
9. Service Mode 9.7.3 Setting up the Interfac e Standard Set up The communication protocol for the communication between the pro jector and a computer can be set on R S232 or RS422. T o set up the desired protocol, handle as follow : 1. Push the c ursor key ↑ or ↓ to highlight Interface Standard .
9. Service Mode Set up the network configu ration. T o set up the network configuration, follow the next procedure : 1. Push the cursor key ↑ or ↓ to highlight Network Configuration . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ.
9. Service Mode If a wrong value for an octet is entered, the following error messa ge will be d isplayed to indicate where the e rror is located. Example of message : "Invalid octet. Th e maximum value is 255 for each octet ! " . ERROR Invalid octet the maximum value is 255 for each octet! <EXIT> to return.
9. Service Mode 100 Clo value Time [h] L i g h t o u t p u t [ % ] Image 9-6 Linking via the RS232 in/ou t The constant light output of projectors in a chain (maximum 12 projectors) can be set to the same value by linking the projectors via the RS232 co nnector .
9. Service Mode To slave 1 Master Projector Comm port Comm 800 splitter To slave 2 To slave 3 To next Comm 800 splitter "To Switcher" To slave 4 Comm 800 splitter To slave 5 To slave 6 To sl.
9. Service Mode The lamp menu will be displayed. LAMP Constant Light output [OFF] Using [RS port] Mode [NORMAL] Serial number : R101111 Article number : R9840xxx Run time : 10 hours Remaining run time : 490 hours Number of strikes : 10 Z_AXIS : 100 Select with ↑ or ↓ then <ENTER> <EXIT> to return.
9. Service Mode 2. Press EN TER to select. A dimming slider box appears on the screen. 3. Use the ↑ or ↓ keys to dim the lamp until the desired light output is reached. 9.1 1 BARCO Logo What can be done? The BARCO logo can be added to the image, in overlay or on a background, on any place o n the screen.
9. Service Mode A vailable Add Ins CLO : When activated, the lam p option ‘Constant light output’ in the menu ‘Lamp’ becomes available. Scenergix : When activated, soft edging become s possible in the Random access adjustment mode. How to activate an add-i ns? 1.
9. Service Mode Start Up 1. Push the c ursor key ↑ or ↓ to highlight Preset Input Balance . SERVICE BARCO LOGO ADD INS PRESET INPUT BALANCE ADVANCED PROCESSING DIAGNOSIS FACTORY DEFAULTS MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-34 2.
9. Service Mode The Advanced Processing menu will be displayed. ADVANCED PROCESSING MINIMUM DELAY [ON] <ENTER> to toggle <EXIT> to return Menu 9-37 3. Select Minimum D elay and press ENTER to toggle between [ON] or [OFF]. 9.15 Diagnosis 9.
9. Service Mode FIB Formatter interface board How to select? 1. Push the cursor key ↑ or ↓ to highlight I2C . DIAGNOSIS I2C DMD SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-40 2. Press EN TER to select.
9. Service Mode 9.15.4 SMPS How to select t he overvi ew? 1. Push the c ursor key ↑ or ↓ to highlight SMPS . DIAGNOSIS I2C DMD SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-44 2. Press EN TER to select.
9. Service Mode 9.15.6 V oltages How to select t he overvi ew? 1. Push the cursor key ↑ or ↓ to highlight Voltages . DIAGNOSIS I2C DMD SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-48 2.
9. Service Mode 3. Are y ou sure to restore the factory defaults ? If yes, press the cursor key ↑ or ↓ to highlight Continue. A message will be displayed. Factory defaults Please wait Remaining tim e:xs e c Menu 9-52 If no, press the cursor key ↑ or ↓ to highlight Return.
10. Prog rammable Function Keys 10. PROGRAMMABLE FUNCTION KEYS 10.1 Function Keys What can be done with these keys? The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu.
10. Pr ogrammable Functio n Keys 132 R5976654 SLM R12+ 27/01/2005.
A. Standard Sou rce set up File s A. ST ANDARD SOURCE SET UP FILES A.1 T able overview T able overview The following standard source files are pre-programmed in the projector .
A. Standard Source set up Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 INTER_GR 1 184x886 67,170 61,79 6 92,941 1504 1 184 920 886 MAC_2 640x480 66,667 35,0.
A. Standard Sou rce set up File s Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 SUNXGA77 1024x768 77,069 62,040 84,375 1360 1024 805 768 SUP_MAC 1024x768 60,000 48.
A. Standard Source set up Files 136 R5976654 SLM R12+ 27/01/2005.
B. Built-In Dust Filters B. BUIL T-IN DUST FIL TERS B.1 Built-In Dust Filters first series projectors Overview • Dust filter on the front side • Dust filter on the back side • Dust filter on the bottom side W ARNING : As the p rojector has to be open ed, this proced ure has to be performed by qu alified service tech- nician.
B. Built-In D ust Filters Image B-2 Input box slide out 5. Slide out the input box a little. 6. Loosen the s crew on the front side. Image B-3 Front screw top cover removal 7. Remo ve the back cover , see "Dust filt er on the b ack side", page 139.
B. Built-In Dust Filters How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filte rs and put the cover back on its place by fo llowing the opposit e procedure. T ake care to click the lens light cover into its p osition.
B. Built-In D ust Filters Image B-6 Back cover removal 2. T ake off the cover . 3. Turn out 2 times 4 screws to r emove both dust filters on the back side of the cover . Image B-7 Dust filter removal 4. T ake out the dust filters. 5. Turn out the 4 screw on the bottom side and take out the dust filter .
B. Built-In Dust Filters Image B-8 Dust filter removal How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filters and put the cover b ack on its place by follow ing the opposite p rocedure. B.1.
B. Built-In D ust Filters B.2 Built-In Dust Filters recent s eries projectors C AUTION : Always turn off the projecto r before proceeding to dust filter clea ning or replacement.
B. Built-In Dust Filters B A Image B-1 1 Release dust filter at fro nt side 2. Loosen th e 4 captive screws (B) securing filter casing to projector front. The dust filter is released and can be removed (C) for cleaning or replacement. C Image B-12 Removing dust filter from its casing How to cle an! 1.
B. Built-In D ust Filters B A C Image B-13 2. Secure t he position of the air filter in its casing by tightening the 4 captive screws (C). B.2.2.2 Dust filters on the rear side of the project or Access to the a ir filt ers T o access the air filters on the rear of the projector , first the projector rear cover has to be removed.
B. Built-In Dust Filters B A Image B-15 Removal metal fixation plate 2. Slide the metal fixation plate to the right unt il the screw head matches the free gap in the plate. 3. Remo ve metal fixation plate from rear cover. 4. Loosen the 3 hexagon socket screws (C) , securing metal fixation bar (D) to rear cover .
B. Built-In D ust Filters 2. Brush m ost of the dust off with a soft brush and/or blow dust away with compresses air . Tip : Always replace damaged and/or too dirty air filters by a new one. How to reins tall the cleaned or new air fi lter 1. Place the air filters (A) on their place in the projector rear cover.
C. Troublesho oting C. TROUBLESHOOTING C.1 Error codes Overview The following table gives an overview of some important error codes displayed on the LED display of the projector .
C. Troubleshoot ing Error code Description Caused by Action 41 1 1 30V too low Call a qualified service engineer 41 12 15V too low Call a qualified service engineer 41 13 12V too low Call a qualified .
Gloss ary GLOSSAR Y 2:2 pull-down The process of transferring 24-frames/sec film format into video by repeating each frame (used for P AL DVD’s) as two video fields. (A D) 3:2 pull-down Method used to map the 24 fps of film onto the 30 fps (60 fields) o r 25 fps (50 fields), so tha t one film frame occupies three video fields, the next two, etc.
Gloss ary 150 R5976654 SLM R12+ 27/01/2005.
Index INDEX A Address 56 Program 56 RCU 56 Adjustment 51–52, 60 Local L CD Display 60 Quick set up 51–52 Lens 51 On screen color 52 Adjustment mode 59, 61–62 Random Access 61–62 Picture Servic.
Index Convergence 102 Input Slots 95 Internal Patterns 10 7 Lens 103 No Signal 99–101 Background color 100 Shutdown Setting 100 Shutdown time 101 OSD 106–107 Color settings 106 Menu Position 107 Q.
Index Start up 109 Side panel 19 Installation 19 source files 133 standard 133 Stacking Projectors 27 Standard source files 133 Switching off 35, 49 Switching on 33 Switching to standby 35, 49 T T emp.
Index 154 R5976654 SLM R12+ 27/01/2005.
Revision Sheet To : Barco nv Even ts/Documenta tion Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: antoon.dejaegher@barco.
Een belangrijk punt na aankoop van elk apparaat Barco SLM R12+ (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Barco SLM R12+ heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Barco SLM R12+ vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Barco SLM R12+ leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Barco SLM R12+ krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Barco SLM R12+ bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Barco SLM R12+ kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Barco SLM R12+ . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.