Gebruiksaanwijzing /service van het product ADS-440 van de fabrikant Swann
Ga naar pagina of 64
Sw annEy e Pan/Tilt IP Camera M440IPC050911E.
FCC V erication NOTE: This equipment has been test ed and found to comply with the limits for Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful interference in a residential installation.
Package C ontents Wir eless IP Camera w/ wi- antenna Po wer Adapter Soft ware CD Screws and W all Plugs W all/Ceiling Mount Manual 1. W elcome The SwannE ye IP Camera is an integra ted wireless IP (network) camera solution. Put simply , it ’ s a ver y smar t camera that has its own w eb ser ver embedded.
Cont ents 1. W elcome 3 2. Product Fea tures 6 3. Product Layout 7 3.1. F ront view ................................................................................................................ 7 3.2. Rear View .....................................
8.4.19. Maintain: Upgrade F irmware ................................................... 46 8.4.20. Maintain: Log ................................................................................. 47 8.4.21. Restore F ac tory S ettings .................
2. Product F eatures Quick and easy installation : The included SwannEy e Search T ool helps you nd your camera on the network and the intuitiv e web inter face makes setup a breeze . W ired & Wireless acc ess : The camera can be accessed through a wir ed connec tion using the 10/100 RJ45 LAN port or through wireless.
Setup 7 SwannEy e IP Camera 3. Product Lay out 3.1. Fr ont view Light Sensor Light Sensor detects low light and switches to night vision Infrared LEDs These allow the camera to achiev e night-vision up to 33ft/10m.
Setup 8 SwannEy e IP Camera 3.3. Bottom V iew The reset switch is loca ted on the rear of the camera, right under the antenna. If you ever need to r eset the camera back to factor y settings and are unable to do this from the menu screens , you can use the reset switch.
Setup 9 SwannEy e IP Camera 5. Sof tware installation T o congure the camera, y ou need to access it. This is done through a w eb browser or the included CMS software (on the included CD) but: Y ou will need to know the IP address:port number assigned to the camera by y our network.
Setup 10 SwannEy e IP Camera 5.2. Mac OS X congura tion T o use the SwannE ye Search T ool under Mac OS X: • No installation is requir ed. Simply run the tool from the CD by double- click ing on the ‘ S wannEye Search T ool ’ le.
Setup 11 SwannEy e IP Camera 6. Using the S wannEy e Search T ool on the local network Double click the SwannEy e Search T ool icon on the desktop and the SwannEy e Search T ool window will open. The SwannE ye Search T ool will search your network for an y IP cameras and devices.
Setup 12 SwannEy e IP Camera 6.1. Sw annEye Search T ool options If your camera is successfully list ed in the Device List window , you can now proceed to “6. Using the SwannEy e Search T ool on the local network ” on page 11 to log in and view the camera and congur e its settings.
Setup 13 SwannEy e IP Camera 6.1.1. Device Inf ormation Some basic information is pro vided such as Device name and the System/App F irmware V ersion numbers. 6.1.2. IP Cong This page is used to congur e the net work settings. Set IP Automatically (Rec ommended) : Check this box to obtain an IP address from the DHCP server .
Setup 14 SwannEy e IP Camera IP Address : The IP address assigned to the camera. If you ar e not having this automatically assigned by a DHCP server , you will need to manually enter in a valid static IP that is available on y our network . The rst sections match the rst three sections of your subnet.
Setup 15 SwannEy e IP Camera 7. Ac cessing the camera from the L ocal Area Network (LAN) The ‘S wannEye Search T ool’ shows the IP addr ess+por t number for your camera on the Local Ar ea Net work (LAN).
Setup 16 SwannEy e IP Camera 7.1. Username and passw ord When the login screen appears, enter the username and password . By default, there is an Administr ator account already set up in the camera. The default Administrat or account name is : admin and the password is 123456 .
Setup 17 SwannEy e IP Camera 7.2. Login page 7.2.1. Language The camera defaults to English but if y ou need a dierent language, click on it from the list along the top r ow . Af ter a few sec onds, the inter face will update with the new language.
Setup 18 SwannEy e IP Camera 7.2.3. Brow ser options on the Mac Mode 1 : This mode should not be used on the Mac. Mode 2 : Choose Mode 2 for all browsers when run on a Mac-based comput er .
19 SwannEy e IP Camera Visit or 8. Inter face & user ac counts Once you ar e logged in, you will see the Main I nterface. This is where you can view your cameras and con trol many of their functions such as turning recording on and o . F rom here you can also access the r emote settings.
20 SwannEy e IP Camera Visit or 8.1. Device S tatus In addition to the IP camera you are ac cessing, you can link a further eight cameras to the interface and view and control them all from the one in ter face. The Device Settings section displays the current status of the camera y ou are curently viewing , along with icons for all nine cameras.
21 SwannEy e IP Camera Visit or 8.2. V isitor Acc ess W indow mode : From this section you can switch betw een displaying only one camera in the viewing window to f our or nine in grid mode. T o add more cameras, see “8.4.5. Multi-Device Settings” on page 27.
22 SwannEy e IP Camera Visit or PLA Y / ST OP / A UDIO / T ALK / RECORD / SNAPSHO T : Play : P rovides a live feed fr om the camera or returns to live view . Stop : Stops live video viewing of the camera. The camera can not be recor ded, and is not displayed on the viewing scr een.
23 SwannEy e IP Camera Operator 1. PTZ Con trol pad: Use the control pad to adjust the P an/Tilt (where applicable) of the camera. Y ou can click on the directional pad to move the camera up/down and left/right. Pr ess the Center button (curled arrow) t o return the camera to its original dir ec tion.
24 SwannEy e IP Camera Operator 6. FPS: The number of F rames Per Second the interface will display . “F ull Speed” will display the maximum number of frames supported by the camera and your network connection. T ypically , this will be Realtime .
25 SwannEy e IP Camera Administra tor 8.4. Remote Settings When you login as administr ator , Remote Settings is enabled. F rom here, you can access a host of options which are list ed below .
26 SwannEy e IP Camera Administra tor 8.4.3. Date & Time Settings Set the date and time for y our location. This is impor tant when stamping the date and time onto video les and snapshots to identify when they w ere taken.
27 SwannEy e IP Camera Administra tor 8.4.5. Multi-Device Settings This featur e is one of the most versatile in a camera of this class. It allows you t o link up to eight other IP cameras to this camer a and control and view them from the one interface.
28 SwannEy e IP Camera Administra tor Add cameras c onnec ted to the Internet T o add a device/camera that is not on the L ocal Area Network but is accessible via the internet, you will need to en ter in its information manually . F irst make sure you can access the r emote camera through an internet bro wser via its IP address (i.
29 SwannEy e IP Camera Administra tor 8.4.6. Network: Netw ork Settings Obtain IP Automatically : If the IP camera is connected to a r outer with DHCP function, you can check this box to obtain an IP addr ess automatically from your router . Other wise, uncheck this box to manually set up a static IP addr ess using the extra elds which appear .
30 SwannEy e IP Camera Administra tor 8.4.7. Network: W ireless Settings This sets up wireless LAN cr edentials so that the camera can connect to a network router via WiFi. Note : T o access the camera through WiF i, you need to set it up through this page while connected to the camera through a wir ed connection.
31 SwannEy e IP Camera Administra tor Encryption : T he camera suppor ts WEP , WP A and WP A2 encr yption to protect the data being transmitted between y our PC and the camera. Y ou need to match which encryption you use on the camera to what you are using on y our router .
32 SwannEy e IP Camera Administra tor 8.4.8. Network: ADSL Settings The IP camera can connect to a DSL modem and pass the login details to the modem to access y our ISP account. Using ADSL Dialup : Check this bo x to turn on the ADSL feature of the camera.
33 SwannEy e IP Camera Administra tor 8.4.9. Network: UPnP Settings If your router supports UPnP and you ha ve it activated, you should check this bo x (and click “ submit”) to turn on UPnP on the camera.
34 SwannEy e IP Camera Administra tor 8.4.10. Network: DDNS Settings If you do not already know what DDNS is, it may seem one of the most daunting aspects of setting up a device to be accessible from the in ternet.
35 SwannEy e IP Camera Administra tor 8.4.11. Alarm: Alarm Settings Alarm Detect Motion Detection Armed : Arms Motion Detec tion (see page 40). Alarm Input Armed : Arms the alarm block on the rear of the camera. This is an advanced fea ture, and recommended f or experienced users only .
36 SwannEy e IP Camera Administra tor 8.4.12. Alarm: eMail Settings Set up email credentials so that the camera can send warnings and captur ed images to your email inbo x. Sender : The sender of the email warnings. Receiv er 1 - 4 : T he recipients of the e -mail warnings.
37 SwannEy e IP Camera Administra tor Mail test error messages The follo wing are error messages you may get when testing the email function. 1. Cannot connect to the server . 2. Network Err or . Please try later . 3. Server Error . 4. Incorrect user or passwor d.
38 SwannEy e IP Camera Administra tor 8.4.13. FTP Settings Set up FTP credentials so that the camera can send warnings and captur ed images to an FTP server . Note : When Alarm Ser vice Settings->Upload Image on Alarm is checked, the FTP Ser vice takes eect.
39 SwannEy e IP Camera Administra tor FTP T est error messages Click the TEST button to test your FTP settings. If there is a problem, you will get one of the following err or messages. 1. Can not connect to the server . Please check FTP Ser ver is correct or not.
40 SwannEy e IP Camera Administra tor 8.4.14. Alarm Settings (Motion Detection) The ALARM SET TINGS page is where you can congure motion detection and the alarms or actions to be taken when motion is detected. The camera can send email alerts or upload images to a ser ver when it detects movement.
41 SwannEy e IP Camera Administra tor Upload Images on Alarm : Check this box if y ou want to send an image when an alarm is triggered. Upload Interval (Seconds) : Set an interval (in seconds) between each upload . Scheduler : Use the scheduler to limit motion triggered t o only cer tain periods.
42 SwannEy e IP Camera Administra tor 8.4.15. Other Settings This lets you set paramet ers for Pan/T ilt control primarily in regards to speed of movement of the pan and tilt. Status LED Mode : Alters the behavior of the Netw or k Indicator LED on the front of the camera.
43 SwannEy e IP Camera Administra tor 8.4.16. Maintain: Device Inf o The Device Info page contains lots of t echnical data about the hardware/rmwar e/ software that the camera uses. Y ou might need to know some of this information if you ’r e contacting Swann T echnical Suppor t.
44 SwannEy e IP Camera Administra tor 8.4.17. Maintain: Alias Settings The camera can be named here . Alias : The name of the camera. Enter the name y ou want for the camera here .
45 SwannEy e IP Camera Administra tor 8.4.18. Maintain: Date & Time Settings Device Clock Time : The current time as measured b y the camera. Device Clock Timezone : Where the camera is loca ted in the world, relativ e to GMT (Gr eenwich Mean Time).
46 SwannEy e IP Camera Administra tor 8.4.19. Maintain: Upgrade F irmware The device and embedded Web User Interface (UI) occasionally get upgraded to correct errors or add new featur es. Use this function to load the new settings into the camera. Use the ‘Br owse’ button to nd the le containing the update and click ‘Open.
47 SwannEy e IP Camera Administra tor 8.4.20. Maintain: Log The Log will sho w you a list of all the camera ’ s recent activities..
48 SwannEy e IP Camera Administra tor 8.4.21. Restore F ac tory S ettings This resets all the settings in the camer a back to the way they were when left the factor y . Use this carefully since it will delete an y settings or preferences such as your network settings and you will hav e to re-setup the camera again.
49 SwannEy e IP Camera Administra tor 9. C onnec ting the camera to the internet 9.1. Connect directly through ADSL modem (no router) The IP camera can connect to an ADSL modem and pass the login details to the modem to access y our ISP . Alternatively , it can connect to a router in bridge mode.
Internet Access 50 SwannEy e IP Camera 9.2. Using a r outer to access the Int ernet If you are using a rout er to access the internet, you do not need to set up the ADSL settings page. • Connect the IP camera to the LAN using a network cable. This can be a switch or a router depending on y our net work.
Internet Access 51 SwannEy e IP Camera 10. Ac cessing the camera fr om the internet Using the ‘Sw annEye Search T ool’ you hav e been able to access the IP camera from the same network that your c omputer and IP camera were connected to .
Internet Access 52 SwannEy e IP Camera 10.2. Y our IP Address 10.2.1. Dynamic IP address Y our IP address is likely to change . This is because ever y time you connect to your Internet Ser vice Pro vider (ISP), you are assigned a new IP number . Sometimes, your ISP may change y our IP address without your knowledge.
Internet Access 53 SwannEy e IP Camera 10.4. Port mapping In addition to an IP address, y ou need to assign a por t to your camera thr ough which outside communications can access the camer a. T he por t assigned to the camera is done through “8.4.6.
Internet Access 54 SwannEy e IP Camera 10.5. DDNS Dynamic Domain Name Ser vers are similar to DNS servers. The dierenc e is that they are meant f or people who don’ t want to buy a domain name (like Google. com), but still want an easy wa y to remember their own IP address.
Internet Access 55 SwannEy e IP Camera 10.5.3. How to r egister a name? T o register a dynamic DNS name of y our own, you need to visit the website of one of the many DDNS pro viders on the internet. We run our own a t w ww.swanndvr . com. W e oer a free service, which we support alongside your camera.
Internet Access 56 SwannEy e IP Camera 10.5.4. Ac cess the IP camera using a DDNS name T o access the camera fr om the internet outside of your Local Area Network (LAN) you can now ent er the DDNS name+por t into a browser in the f ormat: http://yourdomainname .
Internet Access 57 SwannEy e IP Camera 11. Ac cessing the camera thr ough a mobile device 11.1. iPhone/iPad Y ou can download the SwannE ye app from the App Store . Install it on your device. 11.2. Android Device Y ou can download the SwannE ye app from GooglePlay .
58 SwannEy e IP Camera 12. T roubleshooting 12.2.1. F orgotten the administrator username or passw ord? The default username is: admin . The password is 123456 . If you have set a new administra tor username or password and you cannot remember it, you will need t o reset the camera back to its default factor y settings.
59 SwannEy e IP Camera 12.2.5. Network C onguration problems Check to ensure that y our HT TP server software is congured and running properly . If you’ re running any r ewall sof tware, make sur e it ’ s allowing inbound connections to the same port congured in your camera (under “8.
60 SwannEy e IP Camera 12.2.8. Can ’t ac cess the Network camera fr om the internet? • Is the ActiveX plugin corr ec tly installed? • Is the network port used by the camera blocked by a rewall or anti- virus software? • Has UPnP (which will allow suc essful por t for warding) been turned on at the camera (see “8.
61 SwannEy e IP Camera 13. Specications Camera Image sensor 1/4 color CMOS Lens 3.6mm Infrared LED 8 pcs Pixel 300,000 Night vision distance up to 10M / 33ft A WS/A GC/AES/exposure Auto Minimum illumination 0.
62 SwannEy e IP Camera General User authentication user/passw ord (administrator/operator/visitor) Simultaneous viewers 4 Viewers W eb browser Microsoft Internet Explorer 6.0 or above Google Chrome Mozilla Fir efox Apple Safari Opera Supported mobile Apple iPhone / Android Powe r DC 5V 1.
63 SwannEy e IP Camera 14. W arranty T erms & Conditions Swann Communica tions warrants this product against defects in workmanship and material for a period of one (1) y ear from its original purchase date . Y ou must present your rec eipt as proof of date of purchase f or warranty validation.
USA toll free 1-800-627-2799 (Su, 2pm-10pm US PT ) (M- Th, 6am-10pm US PT ) (F 6am-2pm US PT ) USA Ex change & Repairs 1-800-627-2799 (Option 1) (M-F , 9am-5pm US PT ) A USTRALIA toll free 1300 13.
Een belangrijk punt na aankoop van elk apparaat Swann ADS-440 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Swann ADS-440 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Swann ADS-440 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Swann ADS-440 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Swann ADS-440 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Swann ADS-440 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Swann ADS-440 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Swann ADS-440 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
