Gebruiksaanwijzing /service van het product SW242-DU2 van de fabrikant Swann
Ga naar pagina of 24
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
4 4 P ackage Contents DVR4-1000™ Unit Remote Control Operating Instructions Easy Setup Guide Power Adapter with Cable Software CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer cr eate an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
8 8 Connecting the D VR to a TV Monitor T urning the D VR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
10 10 IMPORT ANT NOTE: The following instructions ar e for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pressing the Menu Button T o navigate the menus press the directional arr ow keys T o select the highlighted option press or or T o return to the previous menu press Note: The menu cannot be accessed while in playback or backup mode.
12 12 Menu Operation Camera Menu Accessing and Navigating the Menu System The main Setup Menu can be accessed by pressing the Menu Button T o navigate the menus press the directional arr ow keys T o select the highlighted option press or or T o return to the previous menu press Note: The menu cannot be accessed while in playback or backup mode.
14 14 Motion Detection Menu The Motion Detection menu allows you to set motion options for each camera. Note: The DVR detects motion based on the level of change in the picture.
10 10 IMPORT ANT NOTE: The following instructions ar e for installing or changing the hard drive. If your DVR4-1000™ alr eady has a hard drive pr e-installed disregar d these steps. Installing or Changing a Hard Drive Installing / Changing a Hard Drive in the DVR4-1000™ 1.
16 16 System Menu The System menu provides general setup options such as hard disk information, time, date and fi rmware settings. Use the arrow buttons to select and playback the highlighted Event. Press Stop to exit playback mode. Hint: Y ou can also access the Event List by pressing the Play button while viewing your cameras.
8 8 Connecting the D VR to a TV Monitor T urning the D VR On/Off and Auto R ecovery INPUT 1 2 1. Connect the RCA end of the Video Cable to the Y ellow Video INPUT on the back of the TV Monitor . 2. Connect the BNC end of the Video Cable to the Video OUTPUT connection on the back of the DVR.
18 18 Backup Footage The DVR4-1000™ has a backup feature via the USB port on the fr ont of the DVR. The DVR accepts fl ash drives or thumbdrives up to 2GB in size. Follow the steps below to backup footage: 1. Insert a USB fl ash drive / thumbdrive (not included) to the USB port.
6 6 R emote Control Layout 1-4. Camera Select Buttons Changes to corresponding camera when pressed 5. Record / Stop Button Start or stop recor ding 6–7. Up & Down Buttons Moves up / down in menus 8-9. Rewind & Fast Forward Moves left / right in menus 10.
20 20 Viewing Backup Footage on a PC (cont) Exporting an A VI fi le Extract footage fr om a larger video clip T o view video footage on another computer cr eate an A VI fi le using the built in export ability . 1. Right-click the main Camera view and click Export > A VI 2.
4 4 P ackage Contents DVR4-1000™ Unit Remote Control Operating Instructions Easy Setup Guide Power Adapter with Cable Software CD BNC to RCA Video Cable Operating Instructions Security Stickers If you are missing any of the components above, contact Swann Communications for assistance.
22 22 Video/Audio Video Format: NTSC / P AL depending on region Operating System: Embedded RTOS Video Input: BNC x 4 Audio Input: RCA x 1, Line-In Video Output: BNC x 1 Audio Output: RCA x 1, Line-Out Display and Recording Display Frame: NTSC: 120 fps (4 × 30 fps) P AL: 100 fps (4 × 25 fps) Global Recording Frame Rate: NTSC: Max.
2 2 FCC V erifi cation: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide r easonable protection against harmful interfer ence in a residen- tial installation.
24 24 © Swann Communications 2008 Swann T echnical Support All Countries E-mail: tech@swannsecurity .com T elephone Helpdesk See http://www .worldtimeserver .com for information on time zones and the current time in Melbourne, Australia compared to your local time.
Een belangrijk punt na aankoop van elk apparaat Swann SW242-DU2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Swann SW242-DU2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Swann SW242-DU2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Swann SW242-DU2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Swann SW242-DU2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Swann SW242-DU2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Swann SW242-DU2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Swann SW242-DU2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
