Gebruiksaanwijzing /service van het product PDT 8000 Series van de fabrikant Symbol Technologies
Ga naar pagina of 44
PDT 8000 Series.
PDT 8000 Series © 2002 SYMBOL TECHNO LOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability , function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
1 Quick Reference Introduction Congratul ations on yo ur purchas e of Symbol T e chnologies’ PDT 8000 Series T erminal! Its unique combination of features make this product superior for use in a wide range of applications.
2 PDT 8000 Series • Navigation Bar and Command Bar on page 16 • Input Methods on page 17 • Scanning with the T erminal on page 20 • Resetting Y our T erminal on page 20 • Host Communications.
3 Quick Reference Part s of the T erminal Front View To p V i e w Power Button TFT LCD (color) Speaker 1-D Exit Window Microphone Charge LED Scan LED Audio Jack.
4 PDT 8000 Series Part s of the T erminal (continued) Back View Bottom V i ew Serial & Charge Port Sty lu s Handstrap Battery Door Scan Button IrDA Port Scan Button.
5 Quick Reference Inserting a Comp act F lash Storage Card The PDT 8000 has a slot for a compact flash storage card which includes a compartment door that prevents the card from coming out if the PDT 8000 is dropped. T o insert a compact flash card: 1.
6 PDT 8000 Series Inst alling Batteries 1. Remove the battery door . 2. Slide the latches on both sides of the battery down, to ensure they are in the unlock position . Insert the battery into the compartment. 3. Lock the battery into place by sliding the latches on the bat- tery up.
7 Quick Reference Charging the Battery Charging the Main Batt ery and Memory Backup Battery Before using your terminal for the first time, charge the lith ium-ion battery in the terminal fo r approximately four hours, using the Serial Charging Cable or any other appropriate accessory .
8 PDT 8000 Series The terminal charge LED blinks amber to i ndicate that the terminal battery is charging and turns solid amber when charging is complete. The battery fully charges in less than four hours. See LED Indicators on page 23 for other indications.
9 Quick Reference Charging the Battery Using a Cradle Y ou can charge the main battery using the CRD 8000-1000S, CRD 8000-1000M, CHS 80 00-4000C/B or CRD 8000-400 0E. For more information, see the setup in structions in the respective Quick Reference Gu ides.
10 PDT 8000 Series St arting the T erminal Press the red power button to turn the terminal on. I f the terminal does not power on see T roubl eshooting on page 25 . As the terminal initializes its unique Flash File system, the Symbol splash screen displays for about 60 second s.
11 Quick Reference 3. T ap the center of each target that appears on the Calibration screen with the tip of the stylus. 4. Follow the directions on the scre en which explains how to use the stylus and pop-up menus, an d allows you to set yo ur city and time zone.
12 PDT 8000 Series Using a Headset Y our terminal is equipped with an audio connector which can be connected to a headset. T o use the headset, plug the headset jack into the audio connecto r on the top of the terminal. For more detailed headset information, refer to the PDT 8000 Series Prod uct Reference Guide .
13 Quick Reference Key Action Backspace Press Shift + 7 to erase informat ion entered on the display , one character at a time. Bottom Press Shif t + 9 . Action is application dependent. Clear Press Shift + 1 . Action is appli cation dependent. Enter/Y es Press Enter after entering data or a command.
14 PDT 8000 Series Using the Stylus The stylus selects items and enters information. The stylus functions as a mouse. • Ta p : T ouch the screen once with the stylus to open items and select options. • Drag : Hold the stylus on the screen and drag across the screen to select text and images.
15 Quick Reference T oday Screen When you turn on your terminal for the first ti me each day (or afte r 4 hours of inactivity), the T oda y screen appears. Y ou can also display it by tapping Sta r t - T oday . On the T oday screen, you can see important information for the day .
16 PDT 8000 Series Navigation Bar and Command Bar The navigation bar at the top of the screen displays the active program and current time, and allows you to switch to programs and close screens. Th e command bar at the bottom of the screen contains menus and buttons to perform tasks in programs.
17 Quick Reference Input Methods Enter information in any program by typing with the keyboa rd, or use the input panel to type with the soft keyboard, write using Block Recognizer , Letter Recognize r or T ranscriber . In any case, the characters appear as ty ped text on the screen.
18 PDT 8000 Series Using the Block Recognizer 1. T ap the arrow next to t he Input Panel button, th en Block Rec- ognizer . 2. Write a letter in the left side of the box, or a number in the right side, using special ch aracter strokes. When you write a letter , it is conver ted to typed text on the scre en.
19 Quick Reference Using the Transcriber 1. T ap the arrow next to the Inpu t Panel button, then T ranscriber . 2. Write anywhere on the screen. What you write on the screen will be converted to text.
20 PDT 8000 Series Scanning with the T erminal The terminal has an integrated scanner which collects data by scanning bar codes. Re fer to the PDT 8000 Series Product Reference Guide for information on configuring your termin al for scanning. T o scan bar codes with the terminal: 1.
21 Quick Reference T o perform a soft reset press and hold the power key (for approximately ten seconds) and release it as soon a s the screen changes and the terminal begins to reboot. Performing a Ha rd Reset A hard reset also restart s yo ur terminal, but erases all stored records and entries in RAM.
22 PDT 8000 Series information, see the communica tion instructions in the PDT 8000 Series Product Reference Guide . Communicating with Printer s T o print fro m a standard printer: 1. Attach the snap-on-printer cable to the serial port in the bot- tom of the terminal.
23 Quick Reference LED Indicators LED Indicator Charge LED - Amber Off Not connected to charger . Slow blinking amber T erm inal is charging. Fast blinking amber Error in charging. Solid amber Charging is complete. Scan LED Off Not scanning. Solid red Laser enabled.
24 PDT 8000 Series Maint aining the T erminal • Do not scratch the screen. Use the supplied stylus or plastic- tipped pens intended for use with a touch-sensitive screen.
25 Quick Reference T roubleshooting Problem Cause Solution T erminal does not turn on. Lithium- ion battery not charged. Charge or replace the lithi um-ion bat- tery in the te rminal. Battery not inst alled properly . Ensure battery is installed pro perly .
26 PDT 8000 Series T erminal turns it- self off. T erminal is inactive. Y our terminal turns off after a peri od of inactivity . This period can be set from one to five minute s, in one-minute in- tervals.
27 Quick Reference A message ap- pears stati ng that your terminal’s memory is full. T oo many files stored on the termi- nal. Delete unused memos and records. Y ou can save these records on your computer. Memory allocation too low . Adjust the memory allocation.
28 PDT 8000 Series Y our terminal does not accept scan input. Scanning applica- tion is not loaded. V erify that the unit is loaded with a scanning application. See your Sys- tem Administrator . Unreadable bar code. Ensure the symbol is not deface d. Distance betwee n exit window and bar code is incorrect.
29 Quick Reference END-USER LICENSE AGREEMENT MICROSOFT WINDOWS FOR POCKET PC DA T A EXCHANGE COMPONENT : MICRO SOFT ACTIVES YNC, VERSION 3.1 IMPORT ANT- READ CAREFULL Y : This End-Us er License Agree.
30 PDT 8000 Series access, and interact with the SY STEM, and (ii) the EULA is between Manufac- turer (as defined above) an d the end user-not between the PC Manufact urer and end user . 2. DESCRIPTION OF OTHER RIGHTS AND LIMIT A TIONS. • Speech/Handwriting Recognition.
31 Quick Reference or other means, and labeled “For Upgrad e Purposes Only” or “For Recovery Purposes Only”, you may (i) install and use one copy of such component(s) on the computer(s) you use to exchange dat a with the SYSTEM as a replacement copy for the existing Desktop Software component(s).
32 PDT 8000 Series Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
33 Quick Reference Scanner Labeling THIS CLASS B DIGITAL APP ARATUS COMPLIES WITH CANADIAN ICES-003. CETTE APP AREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA. FOR PA TENT INFORMATION SEE QUICK REFERENCE GUIDE. MOD: PDT8000-XXXXXXXX S/N: ######### MONTH, 2002 Made in XXXXX Symbol Technologies Inc.
34 PDT 8000 Series In accordance with Clause 5, IEC 825 and EN60825 , the following information is provided to the user: ENGLISH HEBREW CLASS 1 CLASS 1 LASER PRODUCT CLASS 2 LASER LIGH T DO NOT STARE .
35 Quick Reference Power Supply Note: Use only a Symbol-approved power su pply 50-14001-005 output rat ed 15VDC and minimum 2.5A. The po wer supply is certified to EN60950 with SEL V outputs. Hinweis: Benutzen Sie nur eine Symbol T echnologies genehmi gt S tromversorgung 50-14001-005 in den Ausg abe: 15VDC und minimum 2.
36 PDT 8000 Series Persons with Pace makers: • Should always keep the device more than 15cm (6 inches) from their pa ce- maker when turned on • Should not carry the devi ce in a breast pocket • Should use the ear furthest f rom the pacemake r to minimize the potential for interference.
37 Quick Reference Radio Frequency Interfer ence Requirements Note : This equipment has been tested and foun d to comply with the limits for a Cl ass B digital device, pursuan t to Part 15 of the FCC rules. These limit s are designed to provide reasonable protection a gainst harmful int erference in a residential installat ion.
38 PDT 8000 Series quency range • Italy requ ires a user lice nse for outside usage. Other Countries All 2.4GHz Radio Devices: • Mexico - Restrict Frequency Range to: 2.450 - 2.48 35 GHz. • Israel - Restrict Frequency Range to: 2.418 - 2.457 GHz.
39 Quick Reference.
40 PDT 8000 Series.
Quick Reference W arranty (A) W arranty Symbol T echnologies (hereafter “Seller” ) hardware Products are warranted against defects in workmanship and materials for a period of twelve (12) months f.
72-58168-02 Revision A — December 2002 Symbol T echnologies, I nc. One Symbol Plaza, Holtsville, N.Y . 1 1742-1300 Service Information Before you use th e unit, it must be configured to operate in your fa cility’s network and run your applications.
Een belangrijk punt na aankoop van elk apparaat Symbol Technologies PDT 8000 Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Symbol Technologies PDT 8000 Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Symbol Technologies PDT 8000 Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Symbol Technologies PDT 8000 Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Symbol Technologies PDT 8000 Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Symbol Technologies PDT 8000 Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Symbol Technologies PDT 8000 Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Symbol Technologies PDT 8000 Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
