Gebruiksaanwijzing /service van het product CD-01U van de fabrikant Tascam
Ga naar pagina of 26
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 1 TEAC Corporation TASCAM CD -0 1U/CD-01UPRO CONTROL I/O Terminals RS-232C Protocol Specifications Ver.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 2 TEAC Corporation 1. Overview The CD-01U/CD-01U PRO (here referred to as “ controlled device ”) functions can be controlled using a serial RS-232C connection from an external device, such as a computer.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 3 TEAC Corporation CD-01U/CD-01U PRO E xternal controller RXD TXD GND GND RXD TXD 2 3 5.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 4 TEAC Corporation 3. Command Format 3.1. Command Format Overview Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 … Byte n LF ID Command Data 1 Data 2 Data 3 Data 4 … CR The codes described here are transmitted in ASCII format (e.
TASCAM CD - 01U/CD-01U PRO RS-232C Protocol Specifications 5 TEAC Corporation 3.3. List of Commands Control/Preset/Sense Command Return Command 88 TIME DATA 0F INFORMATION REQUEST 8F INFORMATION RETUR.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 6 TEAC Corporation Version up history Ver. 1.00: Released version. Ver. 1.02: Following commands to be added.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 7 TEAC Corporation 3.4. Command Sequence The CD-01U/CD-01U PRO does not have the “ ACK ” command for the each transport control command and data preset command.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 8 TEAC Corporation 4. Command Detail Commands, data, and machine IDs which are described here are represented in characters (ASCII). A command is a 2-byte character, a Machine ID is a 1-byte character, and each data is a 1-byte character.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 9 TEAC Corporation 4-6. SHUTTLE Performs the search function in SHUTTLE mode. SHUTTLE mode is maintained until the other command such as STOP, PLAY, or READY is received.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 10 TEAC Corporation 4-10. AUTO CUE LEVEL PRESET Sets the Auto Cue level of the controlled device. When this command is transmitted with request data ([FF ] ), the controlled device returns the AUTO CUE LEVEL RETURN command [A0].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 11 TEAC Corporation 4-12. PITCH CONTROL DATA PRESET Sets the Pitch Control value from – 12 . 5 % to +12. 5 % in 0.1% steps. When this command is transmitted with request data ([FF ] ), the controlled device returns the PITCH CONTROL DATA RETURN command [A5].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 12 TEAC Corporation 4-14. FADE IN/OUT TIME PRESET Sets the fade in and out time from 1 to 10 seconds in 1 second steps. When this command is transmitted with request data ([00FF ] or [01FF ] ), the controlled device returns the FADE IN/OUT TIME RETURN command [AE].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 13 TEAC Corporation 4-17. TIMER/ RESUME PLAY SELECT Turns the Power-on-play mode and Resume Play mode on and off . When this command is transmitted with request data ( [FF] ) , the controlled device sends the RESUME PLAY SELECT RETURN command [B4] .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 14 TEAC Corporation 4-20. REPEAT SELECT Sets the Repeat mode. When this command is transmitted with request data [FF], the controlled device returns the REPEAT SELECT RETURN command [B 7 ].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 15 TEAC Corporation 4-23. TIME DATA SEND SELECT Sets the Time mode of the time data that is sent out from the controlled device automatically (without any request command).
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 16 TEAC Corporation 4-27. ISRC SENSE Requests the output of the ISRC code of the current track (ready mode) or the catalog (stop mode). This data can only be output when a playback-only disc is loaded.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 17 TEAC Corporation 4-34. ERROR SENSE Should be transmitted by the external controller on receipt of an ERROR SENSE REQUEST [F0] from the controlled device , to determine the exact error. The contents of the reply are described in the ERROR SENSE RETURN command.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 18 TEAC Corporation 5. Return C ommand Detail 5-1. TIME DATA When the Time mode is set to other than “ OFF ” with TIME DATA SEND SELECT command [ 3 F ], controlled device outputs the time data in specified form by TIME DATA SEND SELECT command [ 3 F ].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 19 TEAC Corporation 5-4. PITCH CONTROL DATA RETURN Transmitted in response to a PITCH CONTROL DATA PRESET command [25] with the request data ( [ FF ] ) to show the currently set Pitch Control value .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 20 TEAC Corporation 5-8. TIMER/ RESUME PLAY SELECT RETURN Transmitted in response to a TIMER/ RESUME PLAY SELECT command [34] with the request data ( [ FF ] ) to show the currently set the Power-on-play/Resume function status .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 21 TEAC Corporation 5-12. INCR PLAY SELECT RETURN Transmitted in response to a n INCR PLAY SELECT command [3A] with the request data ( [ FF ] ) to show the currently set the Incremental Play function status .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 22 TEAC Corporation 5-16. MECHA STATUS RETURN Transmitted in response to a MECHA STATUS SENSE command [50] and gives the current mechanism status of the controlled device.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 23 TEAC Corporation 5-19. DISC STATUS RETURN Transmitted in response to a DISC STATUS SENSE command [56], giving the status of the loaded disc.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 24 TEAC Corporation 5-21. CURRENT TRACK TIME RETURN Transmitted in response to a CURRENT TRACK TIME SENSE command [58] , giving the specified form of the time data of the current track.
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 25 TEAC Corporation 5-23. PGM TOTAL TRACK No./TOTAL TIME RETURN Transmitted in response to a PGM TOTAL TRACK No./TOTAL TIME SENSE command [5E] , giving the total number of the programmed tracks and the running time of the programmed tracks .
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications 26 TEAC Corporation 5-28. ERROR SENSE RETURN Transmitted in response to an ERROR SENSE command [78] , giving the specific error that has occurred.
Een belangrijk punt na aankoop van elk apparaat Tascam CD-01U (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tascam CD-01U heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tascam CD-01U vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tascam CD-01U leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tascam CD-01U krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tascam CD-01U bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tascam CD-01U kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tascam CD-01U . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
