Gebruiksaanwijzing /service van het product CD-01UPro van de fabrikant Tascam
Ga naar pagina of 28
OWNER’S MANUAL CD-01 U /CD-01UPro CD PLA YER D00864010A » ˛.
O Important Safety Pr ecautions 2 TASCAM CD-01U/CD-01UPro The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
O Important Safety Instructions TASCAM CD-01U/CD-01UPro 3 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
O Safety Information Safety Information 4 TASCAM CD-01U/CD-01UPro This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product.
T able of contents 1 - Introduction Supplied accessories ..................................6 Environmental considerations .....................6 Some notes and precautions ..........................6 Beware of condensation .....................6 Back up memory .
1 - Intr oduction ΠΠEnvironmental considerations Thank you for your purchase of the TASCAM CD- 01U/CD-01U Pro CD player. Before connecting and using the unit, please take time to read this manual .
1 - Intr oduction ΠΠEnvironmental considerations The CD-01U/CD-01U Pro have been designed for the playback of CD-DA format discs and MP3 files record- ed in ISO9660 format. In addition to ordinary 5-inch and 3-inch CDs, it can also play properly recorded CD-R and CD-RW discs.
2 - Remote contr ol unit Some notes and precautions ≠ When the remote control will not be used for an extended period of time, please remove the batteries to prevent the possibility of battery acid leakage which could damage the unit. Should leakage occur, remove and discard the bat- teries, and wipe the battery case thoroughly with a cloth.
3 - Connections Before connecting the CD-01U/CD-01U Pro to other units, please read their operation manuals thoroughly to ensure proper connection. Turn the power on only after all connections have been made. Audio equipment Connecting analog audio equipment Connect analog stereo amplifiers, mixers and recorders to the analog line outputs.
4 - Featur es and their functions Front panel 1 POWER switch 2 Disc slot Insert CD into the slot, label side upwards. 3 Remote signal sensor 4 EJECT key Ejects a disc.
4 - Featur es and their functions Display 1 TRACK indicator 2 Track number display Shows the track number. In the menu mode, shows the menu number. 3 MP3 indicator Lights when a MP3 CD-ROM disc is inserted. 4 INDEX/DIR indicator Shows the index number (CD-DA) or directory number (MP3).
1 ANALOG OUTPUT terminals The analog line output terminals are for RCA pin jacks. The maximum output level is +6 dBV. 2 DIGITAL (OPTICAL) OUTPUT terminal Provides the digital audio signal in S/PDIF format. This connector outputs the 44.1KHz digital signals constantly even if pitch control is activated.
4 - Featur es and their functions 5 PITCH key +/- keys Use these keys to perform the pitch control function. 6 KEY ORIG key This turns the Key Original function on and off. 7 A.CUE/DEL key Sets the Auto Cue level. During program input, the selected program number track is deleted.
14 TASCAM CD-01U/CD-01U Pro 5 - Menu operation The various settings and editing operations possible with the CD-01U/CD-01U Pro are performed through menu options shown on the display. Among the many menu setting options, some may be made directly using the keys on the remote control.
CDs containing MP3 files can be played by the CD- 01U/CD-01U Pro with the following limitations on the number of files and directories. Maximum number of directories: 254 Maximum number of MP3 files: 255 File format: MPEG 1 audio layer 3 Bit rate: 32kbps to 320kbps Sampling frequency: 44.
Plug the headphone cord into the PHONES jack. Adjust the volume with the volume control. When using headphones, take care not to turn the vol- ume too high. Listening at high volumes for extended periods of time may result in permanent hearing dam- age.
6 - Playback Selecting by track number Using the number keys on the remote control, the num- ber of the desired track can be entered directly. Even numbers with two (Audio CD) or three (MP3) digits can be entered easily. For example: Track 9 (Audio CD): press 0 then press 9.
7 - Advanced operations Auto Cue When the Auto Cue function is turned on and a track is selected, the point where sound begins (not where the track begins) on that track is located to and the unit enters pause mode. When the ¥ key is pressed, playback begins at exactly that point.
7 - Advanced operations Press the REPEAT key on the remote control to turn on the repeat mode. In this mode, all the tracks on the disc are played continuously. During playback, if the repeat mode is turned on, play- back continues as before, and when the last track fin- ishes, playback resumes from the first track.
By using an external timer, you can set the CD- 01U/CD-01U Pro to play the loaded disc automatically when the unit is turned on by the timer. 1 First, plug the power cord of the CD-01U/CD-01U Pro into the power outlet of the timer. 2 Load a CD into the unit.
7 - Advanced operations 1 Enter the program mode. 2 Use the SEARCH keys to select the track for editing. Also using the PITCH knob on the front panel to select the track for editing. The track number will be shown in the display. 3 Use the number keys or SKIP keys on the remote control or SKIP keys on the front panel to edit the programmed track.
When this function is on and CD playback begins, the song fades in. When playback is finished, the song fades out. The length of the fade in/out to/from the normal level can be set between 0.5 and 10 seconds in 0.5 second increments (Default setting: OFF).
TASCAM CD-01U/CD-01UPro 23 Time display switching Fader start/Event start End of track war ning (EOM) Eject block Fader start/stop 7 - Advanced operations During audio CD playback (or playback standby.
Exter nal parallel contr ol Restoring factory default settings 7 - Advanced operations The CD-01U Pro can be controlled from an external devices which supports a parallel interface via the CON- TROL I/O terminal on the rear panel.
8 - Specifications Type Compact Disc player Discs 8 or 12cm (3.1 to 4.7inch) CD, CD-R/CD-RW Formats Audio CD (CD-DA), MP3 Number of channels 2-channel Resolution 16-bit Sampling frequency 44.
8 - Specifications Dimensional drawing Error messages Err 01 TOC Read error - the disc's Table of Contents cannot be read - try with another disc or remove and clean the existing disc before repl.
CD-01U/CD-01UPro 27.
TEAC CORPORA TION Phone: +81-422-52-5082 www.tascam .com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.
Een belangrijk punt na aankoop van elk apparaat Tascam CD-01UPro (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tascam CD-01UPro heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tascam CD-01UPro vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tascam CD-01UPro leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tascam CD-01UPro krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tascam CD-01UPro bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tascam CD-01UPro kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tascam CD-01UPro . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
