Gebruiksaanwijzing /service van het product FW-1884 van de fabrikant Tascam
Ga naar pagina of 42
Prof essional Control Surf ace / FireWire A udio-MIDI Interf ace O WNER’S MANU AL CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
2 TASCAM FW-1884 Owner’s Manual TO THE USER This equipment has b een tested and found to comply with the limits for a Class A digital devic e, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide re asonable protection ag ainst harm ful interfere nce when the equipment is o perated in a commercial environment.
TASCAM FW-1884 Owner’s Manual 3 Important Safety Instructions 1 Read these instructions. 2 Keep these instructions. 3 Head all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
Table of Contents 4 TASCAM FW-188 4 Owner’s Manual 1 – Introduction 1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Features . . . . . . . .
TASCAM FW-1884 Owner’s Manual 5 1 – Introduction 1.1 Overview Thank you for choosing the T ASCAM FW -1884. W e designed the FW -1884 to be an all-in-one solution for your computer-based digital audio workstation system.
1 – Introduction 6 TASCAM FW-1884 Owner’s Manual NO TE Despite the fact that you ca n connect and di sconnect the FW -1884 to and fro m the com puter w ith power turned on, we strongly reco mmend that all connections and disconnections are m ade withou t the DA W soft- ware using the FW-1884 runn ing.
1 – Introduction TASCAM FW-1884 Owner’s Manual 7 1.5 Nomenclature Used In The Manual Within this manual, the following typographic conven- tions are used: • The name of a control or connector on the unit is written in the following way: LINE/MIC .
8 TASCAM FW-1884 Owner’s Manual 2 – Controls And Indicators 2.1 Fr ont Panel Illustration..
2 – Controls And Indicators TASCAM FW-1884 Owner’s Manual 9 2.2 Rear Panel Ill ustration.
2 – Controls And Indicators 10 TASCAM FW-1 884 Owner’ s Manual 2.3 Fr ont Panel Contro l Descriptions 1. T rim Pots 1-8 – These ar e analog level contr ols for the input level of the Mic (XLR) and line inputs 1 – 8. Their function is the same regardless of the control surface mode selected.
2 – Controls And Indicators TASCAM FW-1884 Own er’s Manual 11 9. Channel Faders – I n COMPUTER Control mode, the channel faders send continuous controller information to banks of eight channels in the host application ’ s software mixer . The current bank is selected by the BANK keys.
2 – Controls And Indicators 12 TASCAM FW-1 884 Owner’ s Manual MARKER/F5 – In COMPUTER Control M ode, this key is normally mapped to the host application ’ s Place Marker function. R efer to the Application N otes for your software for details.
2 – Controls And Indicators TASCAM FW-1884 Own er’s Manual 13 14. REC key – In COMPUTER Control mode, this is a modifier key . When pressed and held, it modifies the behavior of other select ed keys. Its behavior is entirely dependent on the host application support.
2 – Controls And Indicators 14 TASCAM FW-1 884 Owner’ s Manual COMPUTER Control mode key – S elects the Computer Control mode. I n this mode, the FW -1884’ s control surface modifies the control parameters of the ho st a udi o s oft wa re. For mo re in fo rma ti on , ref er t o se c- tion 4.
2 – Controls And Indicators TASCAM FW-1884 Own er’s Manual 15 ware. T ypically , they are used to navigate through the GUI (G raphic U ser Interface) of the application screen. Refer to y our software ’ s application notes for further details. 29.
2 – Controls And Indicators 16 TASCAM FW-1 884 Owner’ s Manual 34. Master Fader – The Master F ader is a global control, functioning in the same manner regar dless of which control mode is selected. Any movement of the master fader is always communicated simult aneously to the host computer , the MIDI cont rol surface and the monitor mixe r .
2 – Controls And Indicators TASCAM FW-1884 Own er’s Manual 17 9. FireWir e (IEEE-1394) Connections – These connect the FW -1884 to the host computer , pro viding audio, MIDI and control surface communi- cation. T wo connections are pro vided, making it possi- ble to connect additional F ireW ire -compatible devices to the buss.
18 TASCAM FW-1884 Owner’s Manual 3 – Functional Overview 3.1 Control Surface Modes The FW -1884 control surface is extremely versatile, and can be used to control a computer application, to control an audio input monitor mix, and to send MIDI messages to external devices via its MIDI outputs.
3 – Functional Overview TASCAM FW-1884 Own er’s Manual 19 3.3 Dedicated Comput er Controls Some surface controls ar e co mputer-dedicated; that is, they always send a MIDI data signal to the host com- puter (assuming it is connected), regardless of which control surface mode is curr ently selected.
3 – Functional Overview 20 TASCAM FW-1 884 Owner’ s Manual 4 Repeat this procedur e for any other MIDI inputs whose routings you want to change. While in MIDI routing mode, selecting any input key will display its selected MIDI outputs. Additionally , all MIDI indicator LEDs will glow steadily to display routing information.
3 – Functional Overview TASCAM FW-1884 Own er’s Manual 21 3.7 Monitoring and Meter ing Modes The FW -1884’ s twelve -segment stereo LED meters monitor the stereo buss output, before the Mon i t o r Level control.
22 TASCAM FW-1884 Owner’s Manual 4 – Control Surface Modes and Operation As mentioned previously in this manual, the FW - 1884’ s control surface actually functions in three differ- ent control modes: COMPUTER Control M ode, MIDI Control M ode or MON itor MIX Mode.
4 – Control Surface Modes and Operation TASCAM FW-1884 Own er’s Manual 23 T o set the FW-1884 to N ative protocol: 1 Open the FW -1884 Control P anel 2 Select the Se ttings tab 3 In the dr op-down CONTR OL PR O TOCOL menu, select FW -1884 NA TIVE.
4 – Control Surface Modes and Operation 24 TASCAM FW-1 884 Owner’ s Manual 4.1.3 HUI Emulation Protocol The FW -1884 can be used to emulate the control mes- sages sent by the Mackie HUI (H uman User I nter- face).
4 – Control Surface Modes and Operation TASCAM FW-1884 Own er’s Manual 25 I t is important to note that some cont rols are dedicated computer controls, meaning that they always transmit a signal to the host computer , even in MI DI CTL mode.
4 – Control Surface Modes and Operation 26 TASCAM FW-1 884 Owner’ s Manual 4.2.2 Programming Keys If you pr ess one of the keys used in MIDI CTRL sur- face mode, it will light up and the FW -1884.
4 – Control Surface Modes and Operation TASCAM FW-1884 Own er’s Manual 27 4.2.3 P rogramming Encoders The eight channel encoders, as well as the three EQ encoders, can all be reprogrammed. T o display the pro- grammed message for an encode r , just turn it slightly .
4 – Control Surface Modes and Operation 28 TASCAM FW-1 884 Owner’ s Manual 4.2.5 Banking Y ou can use the h BANK y keys to shift through t he four banks of controls. As mentioned earlier , only the channel strip controls – faders, channel MUTE , SOLO and SEL keys, and channel encoders – are bankable.
4 – Control Surface Modes and Operation TASCAM FW-1884 Own er’s Manual 29 4.3.2 M onitoring Setups When the FW -1884 is in MON MIX mode, the F7, F8 and F9 keys determine what source y ou are hearing on Analog Outputs 1/L and 2/R . This is useful for iso- lating the audio coming from your DA W or from external inputs.
4 – Control Surface Modes and Operation 30 TASCAM FW-1 884 Owner’ s Manual In S olo-in-Place, the M ute status of any soloed input can be toggled. P r essing the MUTE key of an unso- loed input has no effect. If you change banks, the flashing CLR SOL O key is a reminder that a Solo is still activ e.
TASCAM FW-1884 Own er’s Manual 31 5 – Host Computer Interfacing 5.1 Contr ol Panel The FW -1884’ s control panel is where you can display and adjust settings which determine how the FW -1884 communicates with your computer and other external devices.
5 – Host Computer Interfacing 32 TASCAM FW-1 884 Owner’ s Manual Sample Rate This is where you select the expected incoming sample rate to the FW -1884’ s digital input. It duplicates the function of the CLOCK and CLOCK RA TE (READ/44.1, WR T/48, T CH/88.
5 – Host Computer Interfacing TASCAM FW-1884 Own er’s Manual 33 5.1.2 ROUTING T AB Optical Output Source This menu selects the source of the audio output appearing at the FW -1884’ s ADA T optical outputs. The selections are: ADA T 1-8 – The audio output is determined within your DA W application software.
5 – Host Computer Interfacing 34 TASCAM FW-1 884 Owner’ s Manual 5.1.3 MIDI PROGRAMMING T AB Th is t ab is use d t o pr og ram the F W -188 4’ s c on tro l su r- face in MIDI CTL mode. F or detailed information on using this function, please refer to section 4.
TASCAM FW-1884 Own er’s Manual 35 6 – Troubleshooting and Support The FW -1884 is a complex device with a number of inter-related component s. If you experience problems with your FW -1884, here are a few suggestions to check first: 6.1 Audio Issues 6.
6 – Troubleshooting and Support 36 TASCAM FW-1 884 Owner’ s Manual 6.3 Contacting Us In the event you experience problem s with your FW - 1884, please contact your dealer or your local TEA C/ T ASCAM distributor . Contact information may be found at the back of this manual, or on the T ASCAM website at www .
TASCAM FW-1884 Own er’s Manual 37 7 – Appendices 7.1 Specifications Analog I/O Digital I/O Mic input 1- 8 (Balan ced) Connector: 3-pin XLR jack x 8 (1: GND, 2: Hot, 3: Cold) Input imped- ance : 2.
7 – Appendices 38 TASCAM FW-1 884 Owner’ s Manual Misc. I/O Overall System Specifications ADA T/Optical input (Li ght-pipe) ADA T optical format di gital multi au dio or 2CH serial audio sign al input termin al. In the case of 2C H serial audio signal, DIGIT AL IN (COAX IAL) is selectab le.
7 – Appendices TASCAM FW-1884 Own er’s Manual 39 Analog I/O DAC Resolution : 24 bit Dynamic range: 100 dB Fs =44.1kHz, A-weight, -60dB output Group delay : 19.1 samples Signal delay < 1.5 ms Fs = 48.0kHz, LINE IN to STEREO OUTPUT < 0.75 ms Fs = 96.
7 – Appendices 40 TASCAM FW-1 884 Owner’ s Manual 7.2 Dimensional drawing 7.3 FW -1884 “Hidden” Functions Listed below are the FW -1884’ s “hidden ” functions (that is, those functions not silk-screened onto the FW - 1884’ s control surface.
7 – Appendices TASCAM FW-1884 Own er’s Manual 41 In MON MIX mode: SELECT Display channel ’ s pan position on SELECT/REC LED’ s SHIFT+SELECT Set channel fader to unity SHIFT+CLR SOLO Clear mute.
TEAC CORPORATION Phone: +81-422-52-5082 www.tascam.com 3-7-3, Nakacho, Musashino-shi, Tokyo 180-855 0, Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.
Een belangrijk punt na aankoop van elk apparaat Tascam FW-1884 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tascam FW-1884 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tascam FW-1884 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tascam FW-1884 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tascam FW-1884 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tascam FW-1884 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tascam FW-1884 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tascam FW-1884 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
