Gebruiksaanwijzing /service van het product MMP-16 van de fabrikant Tascam
Ga naar pagina of 127
» MMP - 1 6 Modular Multitrac k Pla yer D00000000A O W N E R ’ S MANU AL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS CONSIGNES DE SECURITE SICHERHEITSHINWEISE NORME DI SICUREZZA INSTRUCCIONES DE SEGURIDAD VEILIGHEIDSVOORSCHRIFTEN TEAC CORPORATION.
Impor tant Safety Instructions 3 CAUTION: • Read all of these Instructions. • Save these Instructions for later use. • Follow all Warnings and Instructions marked on the audio equipment. 1 ) Read Instructions — All the safety and operating instructions should be read before the product is operated.
.
.
.
.
.
MMP-16 Tascam MMP -16 Owner’s Manual • Table of Contents 5 Tascam MMP-16 Owner’s Manual Chapter 1 General Information ...................................................................... 9 MMP-16 Introduction ..................................
Tascam MMP-16 Owner’s Manual • Table of Contents MMP-16 6 Front Panel Indicators, Switches, and Displays .............................................................................. 37 LED Indicators .............................................
MMP-16 Tascam MMP -16 Owner’s Manual • Table of Contents 7 Serial Transport ....................................................................................................................................... 76 Editor .........................
Tascam MMP-16 Owner’s Manual • Table of Contents MMP-16 8 WORD CLOCK IN Connector ................................................................................................................... 105 WORD CLOCK OUT Connector ....................
Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information MMP-16 9 Chapter 1 General Information This chapter presents the main features and capabilities of the MMP-16 hardware and a functional overview of its Panel/Display states. MMP-16 product specifications are also included.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information 10 The MMP-16 will directly play back material created on Digidesign Pro Tools or WaveFrame digital audio workstations, as well as OMF Compositions which reference Sound Designer II audio media files.
Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information MMP-16 11 A 40-character (two line by 20-character) LCD (Liquid Crystal Display) serves as the MMP-16 status and control text window.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information 12 Functional Overview The MMP-16 operates in any of eight different Panel/Display states (simply referred to as “states” for convenience).
Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information MMP-16 13 The MMP Backup state is accessed via the Load Track state by pressing SHIFT+SLIP after choosing (scrolling to) the desired Project while in the LOAD TRACK state.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information 14 Figure 1 -3. MMP-16 Panel/Display State Hierarchy STATE LCD WINDOW DISPLAY COMMENT NORMAL Shows current play head time on top and selected time register on bottom of display.
Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information MMP-16 15 System Specifications Analog Output Level: +4 dBu balanced, +24 dBu clip, nominal levels trim pot adjustable Headroom: 20.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 1 • General Information 16 Electrical Ratings: 115 VAC @ 2A, 50-60Hz 230 W Max -OR- 230 VAC @ 1A, 50-60Hz 230 W Max Nominal temperature should be 41 to 95 degrees Fahrenheit (5 to 35 degrees Centigrade).
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 17 Chapter 2 Installation This chapter covers the physical installation of the Tascam MMP-16 as either a stand-alone recording/playback system or as part of a larger, multiple unit digital dubber system.
18 Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 General Guidelines Mounting Rack Ears The MMP -16 is a self-contained sixteen channel digital playback device designed to be mounted in a standard 19” (48.26 cm) IEC equipment rack in either the mix studio or a dedicated machine room in a professional audio recording facility.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 19 Installing Multiple MMP Units Multiple units can be mounted one on top of the other when forced air rack ventilation is provided. A one- inch clearance is required on both sides of the MMP-16.
20 Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 AC Mains and Grounding (Earthing) Considerations Each MMP-16 requires one AC mains connection. A standard six-foot (1.83 Meter) power cordset is included with each MMP-16 wired for the USA standard.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 21 OUT MIDI 115/230 VAC 1/0.5 A AUXILIARY OUTLET 9 - 16 CHANNEL ANALOG OUT 1 - 8 CHANNEL ANALOG OUT MMP-16 TEAC CORPORATION SERIAL NO. 115 / 230 ~, 2.0 / 1.0 A, MODULAR MULTITRACK PLAYER MODEL NO.
22 Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 Audio Connections All audio outputs (both analog and digital) of the MMP-16 use DB -25 connectors. The pin configuration used on the DB -25 analog audio connectors is identical to that used for Tascam DTRS format digital tape machines such as the DA -88.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 23 Timecode and Video Reference Signals To accurately synchronize the MMP-16 to film or video, or with other audio playback equipment, some method of providing a stable timing reference must be used.
24 Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 Biphase Connections Biphase is a control signal typically generated by a film projector and is traditionally used to interlock the operation of the film with sprocketed magnetic tape machines.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 25 The MMP MIDI OUT connector carries a MTC signal generated by the MMP-16 whenever the unit is in Play. To slave MIDI devices that can follow MTC (MIDI Time Code) to the MMP-16, connect the MMP MIDI OUT connector to MIDI In port of the external device.
26 Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 Serial Transport Connection The TRANSPORT connection uses the industry-standard RS-422 Sony 9-pin P2 protocol (Ampex VPR -3 is also supported) for controlling external serial transports such as audio or videotape machines.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 27 Using the PC Keyboard Use the keyboard to perform the following data entry tasks on the MMR or MMP: • Enter Project and Track names directly by using the standard alphanumeric keys.
28 Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 Connecting External SCSI Media The MMP-16 SCSI interface card is pre-set to SCSI ID 7. The internal removable drive in the MMP-16 is set to SCSI ID 0. Each device added in the SCSI chain must have a unique SCSI ID number or else the MMP-16 will not boot properly.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 29 Remote Con t rollers for the Tascam MMP-16 Tascam MM-RC The TASCAM MM-RC is a dedicated remote control unit designed specially for use with the MMP-16 and the MMP-16 sixteen channel player unit.
Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 30 Powering Up the System The MMP-16 comes from the factory with the operating system and MMP-16 software pre-loaded onto the internal hard drive.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 2 • Installation 31 4. Connect the MMP-16 to the applicable timing reference source and to the appropriate remote control interface a. To connect the MMP-16 to a film transport, connect the biphase sync output from the projector to one of the four biphase inputs.
Tascam MMP-16 User’s Guide • Chapter 2 • Installation MMP-16 32 Factory Default Settings The MMP-16 is shipped from the factory using a pre-defined set of operating parameters. The factory default settings can be changed in the field at any time through a system of Setup menus that control the MMP-16 operating parameters.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP -16 Operation 33 Chapter 3 MMP-16 Operation MMP-16 Keys & Definitions Throughout this manual several abbreviations and written shortcuts are used to define user operations and machine functions.
34 Tascam MMP-16 User’s Guide • Chapter 3 • MMP-16 Operation MMP-16 Mode This term is use d to refer to the active Control mode selected by Setup menu 000 and to refer to the Track Select Mode which governs the behavior of the SEL keys.
MMP-16 Front Panel Key Groups and Displays -12 -25 SLIP 12 LINE ON PASTE 4 EDIT MON 1 EVENT 2 3 COPY 9 CUT 10 -6 SLIP -25 -12 0 0 -12 -6 -25 SLIP 11 CLEAR -12 -6 -25 SLIP 0 TRACK 5 VIEW LOAD TRACK 6 D.
36.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 37 Front Panel Indicators, Switches, and Displays Collectively, all the front panel keys and the Wheel are called switches and the LEDs, six motion control lamps, and the Liquid Crystal Display (LCD) are called indicators .
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 38 Meter LEDs Each track has its own column of signal level LEDs that read the MMP-16 analog output signal off disk.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 39 Liquid Crystal Display (LCD) The LCD or “display” consists of two lines of twenty characters that show various operator .
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 40 In the Normal state, the bottom line of the display shows time code (or feet & frames) that has been entered manually, captured, or recalled from one of the memory or special-purpose registers.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 41 Slip Track State Display In the Slip Track state, the display will show the current time position in the top line of the display (the same as in the Normal state), while the bottom line of the display is used to show the contents of the slip register for the selected track.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 42 To move a loaded track from its current Track index position into the selected Track index or to load a currently unloaded track into the selected Track index, scroll through the list of available tracks until the desired track is located.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 43 Verify State Display In the Verify state, the display is used for operator interface messages which usually request a Yes/No answer or require a number to be entered (such as a password) before normal operation can be resumed.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 44 Front Panel Key Groups The MMP-16 front panel keys and controls are divided into five functional groups, the Transport Group, the Setup & Wheel Group, the Wheel itself, the Track Group, and the Keypad Group.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 45 Setup and Wheel Group This group of keys contains the SETUP and arrow keys, and the TRIM, JOG, and SHTL (shuttle) keys. These keys are located on the right section of the front panel, directly over the wheel and below the right end of the LED display panel.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 46 JOG Pressing JOG stops the transport and allows the Wheel to “scrub” over the current location at a speed relative to the motion of the wheel. The minimum Jog speed is Play/8 (3 octaves down), and maximum is 1.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 47 Track Group These keys are located at the left central portion of the front panel under the track meters. Although the SEL keys are active all the time, they affect tracks according to which Track Select Mode (EDIT, MON, LOAD TRACK, TRACK, SLIP) is active.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 48 Cut Cut removes the audio from the selected track(s) between the In point and the Out point and places it into the clipboard, while pulling up (slipping earlier in time) all subsequent events by an amount equal to the length of the cut track segment.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 49 Insert Insert places the contents of the clipboard into the selected track(s) at the In point time, while moving all subsequent events “down stream” (later in time) by the length of the inserted event(s).
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 50 EDIT Pressing this key (while in the Normal state) allows the SEL keys to select which track(s) will be later edited (using the SHIFT+SEL edit functions described above).
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 51 Edit Sync Mode The setting chosen in Setup Menu 221 - Edit Sync Mode – determines which point in the audio material to be pasted or inserted from the clipboard will be used as the sync reference point for the edit.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 52 SHIFT+EDIT (EVENT ) Loads the start and end of the event currently under the play head on the selected track(s) into the In point and Out point registers (also called “event capture”).
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 53 When LOAD TRACK is first pressed, the LCD will show a list of all WaveFrame Projects, Pro Tools Sessions, or OMF Compositions on all mounted volumes.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 54 SHIFT+TRACK (UNLOAD ) The shifted function of the TRACK key allows “unloading” of a loaded track, and will return the track to the “blank” state, as well as returning the loaded track back to the pool of unloaded tracks, which can then be viewed using LOAD TRACK.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 55 Keypad Group These keys are located in the central portion of the front panel, directly under the LCD.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 56 OFFSET (SHIFT+1) This display-only register represents the time difference between the MMP-16’s time code and the time code being chased. When locked to the Lynx bus, this equals the time difference between the MMP-16’s time code and the Lynx master time code.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 57 HEAD (SHIFT+8) This read-only register shows the start time of the first edit on the currently loaded tracks. Tracks selected while in the EDIT track select mode govern the operation of this function.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 58 SHIFT The yellow SHIFT key functions like a locking keyboard shift key. When active, it modifies those keys that have a shift function assigned to them (identified by the function name written above the gray keys).
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 59 LOOP Pressing the Loop key prepares the MMP transport for performance of one of several possible types of loop sequences relative to the In and Out time code registers.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 60 LOC (LOCATE) This key causes the transport to locate to the act ive register (bottom line of the display) time code. The time code may be from a recalled register, a captured value or a value entered through the numeric keypad.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 61 Basic Operation Loading and Mounting Drives The MMP-16 will scan the SCSI bus when the system is powered up and will mount all available drives. The MMP is unable to access any drive address that was not present at power-up.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 62 Loading a Project, Session, or Composition Press LOAD TRACK to show list of Projects, Sessions, or Compositions from all mounted drives. The list is shown in alphanumeric order.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 63 Once a track is loaded into a track index, it is removed from the “pool” of tracks available for direct loading, but it may be moved from its current track index position to another track index position.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 64 Tape Mode backup will rewrite (copy) the project or track files as continuous media files with no audio edits, and all fades fully rendered.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 65 Crossfades in OMF Occasionally a WaveFrame project will have an asymmetrical crossfade that must be adjusted in order to perform an OMF Export, since asymmetrical crossfades in OMF files are not supported.
Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation MMP-16 66 Trimming Time Code Values Any time a writeable register is shown in the bottom line of the display (usually by being recalled), it can be trimmed as required. There are two types of trimming: static and dynamic .
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 3 • MMP-16 Operation 67 Local & Studio Monitoring A front panel headphone jack allows the MMP-16 operator to locally monitor one or more tracks, right at the front panel, without affecting the output signals.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 68.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 69 Chapter 4 MMP-16 Setup Menus The Setup State & the Setup Menus Setup menus allows individual MMP-16 parameters to be changed, and if desired, saved to one of the ten User settings files.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 70 When trimming is active (press TRIM), rotating the Wheel or pressing the Up/Down arrow keys scrolls through the available selections for the current menu. These selections also usually “wrap around.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 71 Setup Menu Chart This chart lists all of the Setup Menus and their parameters.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 72 MENU # MENU NAME PARAMETERS 111 Ident Request Auto Assign* 01 (Range 01-100) 112 Ident Assigned 01* (Range 01–10.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 73 MENU # MENU NAME PARAMETERS 320 Biphase Accel 8* Range: 4 through 32 321 Biphase Max Wind 5* Range: 1 through 20 t.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 74 MENU # MENU NAME PARAMETERS 900 Store Settings User 1 User 2 User 3 User 4 User 5 User 6 User 7 User 8 User 9 User.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 75 Setup Menu Details This section contains detailed notes on the operation of some important Setup menu parameters. Control Mode The MMP-16 will always operate in one of seven Control modes.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 76 Serial Transport Similar to Biphase Transport, this mode allows the MMP-16 to control an external audio or video transport connected to the 9 -pin serial Transport conn ector.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 77 The Lynx Bus The Lynx bus allows control of the MMP via a TimeLine Lynx Keyboard Control Unit (KCU). Connect the KCU to one of the Lynx bus connectors on the back of the MMP.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 78 Slip Track/Region The K900 KCU software has a Slip key in the place of the key previously labeled END PT in the Special Functions section of the KCU.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 79 The MMR Bus The operation of multiple MMP-16s may be synchronized by using the supplied 15-pin sync cable to connect the MMP units together via the MMR bus sync connection (the two 15 -pin connectors on the SYNC card).
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 80 Using the MMP Editor Port (Sony P-2 protocol ) The MMP-16 may be controlled from a video editor or other serial controller that is capable of controlling machines using Sony P-2 protocol.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 81 Chapter 5 MMP-16 System Applications This chapter offers more detailed information for using the MMP-16 with film and video applications. Setup Menu parameter selections, technical background information, and block diagram connections are also covered.
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 82 On older film transports that use a tach and a direction signal, the phase A connection comes from the direction signal and the phase B connection comes from the tachometer output.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications 83 Menu 300 is used to set the Biphase Frame Rate. In most applications in the USA the film frame rate will be set to 24 fps (the default setting).
Tascam MMP-16 Owner’s Manual • Chapter 5 • MMP-16 System Applications MMP-16 84 MMP-16 Film Connections Although the MMP-16 can only be controlled by one film transport bus at a time, there are four film transport connections (biphase input) on the UI/B card on the rear panel.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 6 • Maintenance and Service 85 Chapter 6 Maintenance & Service The MMP-16 requires little maintenance other than ensuring adequate airflow through the interior of the unit. Do not use alcohol or other common studio chemical cleaners on the front panel keys.
Tascam MMP-16 Owner’s Manual • Chapter 6 • Maintenance and Service MMP-16 86 6. Locate the MOC card cage. Note on its cover that the Output board is identified, as well the pot associated with each channel. 7. Using a plastic tweaker (supplied with the MMP-16), adjust the Output Ch1 pot to +4 dBu, +/ -0.
MMP-16 Tascam MMP-16 Owner’s Manual • Chapter 6 • Maintenance and Service 87 Formatting Disks The MMP-16 uses the WaveFrame disk format for recording, so disks from that system are compatible with the MMP-16, and disks can be formatted on the MMP-16 for use with the WaveFrame.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 88.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 89 Chapter 7 Technical Support For technical support on the MMP-16 product line contact: TASCAM 7733 Telegraph Road Montebello, CA 90640 Tel (213) 726-0303 Ext 617 Fax (213) 727-7632 E-mail: tascamsupport@teac.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 90.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 91 Appendix A: Control Panel Command Summary Transport Group ONLINE Toggles between offline and online. When lit, indicates unit is online. ONLINE+ o o (Stop) Unmounts all drives so they can be removed from the MMP-16.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 92 Keypad keys CLR Clears the time code in the bottom line of the display; cancels most operations 7 Enter digit, or selects 700 menus (in Setup) SHIFT+7 Locate to “In point” STO+7 Stores time code in bottom line of display into Memory register 7.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 93 6 Enter digit, or selects 600 menus (in Setup) SHIFT+6 Locate to Previous Edit point STO+6 Stores time code in bottom line of display into Memory register 6. RCL+6 Recall Previous Edit time into the bottom line of display.
Tascam MMP-16 Owner’s Manual • Appendix A • Control Panel Summary 94 Track Select Keys EDIT+SEL (1 – 16) Select Edit Mode for Tracks 1 - 16 MON+SEL (1 - 16) Select Headphone Monitor, Tracks 1 .
Tascam MMP-16 Owner’s Manual • Appendix B • Drive Compatibility Chart 95 Appendix B: TASCAM MMP-16 Drive Compatibility Chart MANUFACTURER MODEL MODEL NO. FIRMWARE DATE COMMENTS NIKON MO DRIVE (A/V) SONY MO DRIVE BELUGA DD53-S1P SMO-F544 UNKNOWN.
Tascam MMP-16 Owner’s Manual • Appendix B • Approved Drives 96 Tascam MMP-16 Approved Drives The Tascam Web site at http://www.tascam.com has the latest information on approved drives for use with the MMP-16. Use this page of the Owner’s Manual to note new drives that have been added to the approved drives list.
Tascam MMP-16 Owner’s Manual • Appendix C • WaveFrame Compatibility 97 Appendix C: WaveFrame Compatibility This section contains information on using the MMP-16 in the film post production environment that heretofore has relied on a WaveFrame/StudioFrame system for playback on the mix stage.
Tascam MMP-16 Owner’s Manual • Appendix C • WaveFrame Compatibility 98 Go into the Track Rack. Move all left channel tracks to the ‘1B’ drive and move all right channel tracks to the ‘1A’ drive.
Tas cam MMP-16 Owner’s Manual • Appendix D • Cable Information 99 Appendix D: MMP-16 Cable Information PARALLEL TRACKS and PARALLEL TRANSPORT Connector 37-pin D Male VCC INPUT PIN OUTPUT PIN (+5V) DARLINGTON OUTPUT STAGE OF ULN2803A MAX RATINGS: 50V @ 500MA TYPICAL INPUT TYPICAL OUTPUT 10K 10K 74HC14 1 2 2.
Tascam MMP-16 Owner’s Manual • Appendix D • Cable Information 100 MIDI IN/THRU/OUT Connector pinout PIN # Signal Description (IN, OUT, & THRU) 1 n/c 2 n/c 3 n/c 4 Signal + 5 Signal - NOTES: 1. DIN -5 connector - shield tied to case. 2. Signals are MIDI specification compliant.
Tas cam MMP-16 Owner’s Manual • Appendix D • Cable Information 101 TRANSPORT (Sony 9 -pin) Connector pinout PIN # MSTR Signal SLAVE Signal Pin # MSTR Signal SLAVE Signal 1 Frame ground Frame gro.
Tascam MMP-16 Owner’s Manual • Appendix D • Cable Information 102 ANALOG OUTPUT Connectors pinouts There are two DB-25 style analog output connectors, one for tracks 1-8, the other for tracks 9-16 as labelled on the back of the MMP-16 unit.
Tas cam MMP-16 Owner’s Manual • Appendix D • Cable Information 103 DO (AES/EBU Digital Audio Out 1-8) Connector pinout PIN # Signal Description PIN # Signal Description 1 Digital Output 4 ( ch 7.
Tascam MMP-16 Owner’s Manual • Appendix D • Cable Information 104 SYNC (MMR -Bus) Connector pinout PIN # Signal Description PIN # Signal Description 1 CAN_BUS+ 9 CAN_BUS- 2 CCLK_BUS0+ 10 CCLK_BU.
Tas cam MMP-16 Owner’s Manual • Appendix D • Cable Information 105 WORD CLOCK IN Connector NOTES: 1. BNC, 75 Ohm Terminated. TTL logic levels. WORD CLOCK OUT Connector NOTES: 1. BNC, 75 Ohm Drive Capability. TTL logic levels. VIDEO IN/OUT Connector NOTES: 1.
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 106 Keyboard Operation (with optional MM-RC) The optional MM-RC (Remote Control unit) has a keyboard connector located on the rear panel which accepts a standard PC-AT style keyboard .
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 107 Appendix E: MMP-16 Glossary Abbreviations and Terms Definitions 24 frames The standard film frame rate per second. 25 frames The standard PAL and SECAM video frame rate per second. 29.97 frames The standard NTSC video frame rate for color broadcasting per second.
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 108 Abbreviations and Terms Definitions Control Mode The mode (menu 000) which sets how the MMP-16 is being controlled. Control Track The VTR speed control signal recorded onto the tape. It typically also has time code recorded in it.
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 109 Abbreviations and Terms Definitions LCD Liquid Crystal Display. The twenty character by two line display used on the MMP-16 to display time code, Setup Menus, or machine status. LED Light Emitting Diode.
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 110 Abbreviations and Terms Definitions Monitor The process of selecting one or more tracks to listen to in the headphones or rear panel studio monitor output. Motion Controls The “transport” keys on the MMP-16.
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 111 Abbreviations and Terms Definitions for the audio and a frame reference to keep the audio timed correctly to the video or film frame. Register A memory that holds a time code position or other number.
Tascam MMP-16 Owner’s Manual • Appendix E • Glossary 112 Abbreviations and Terms Definitions TC Generator Time Code Generator. A device to create the 80 bit time code signal for recording onto a video or audio tape. The MMP-16 contains a built-in generator which is always sending out TC when the MMP-16 is playing.
Tascam MMP-16 Owner’s Manual • Appendix F • Disk Time 113 Appendix F: Disk Time Chart Disk Time Chart TASCAM MMR-8 and MMP-16 System MMR-8 Available Rec.
Tascam MMP-16 Owner’s Manual • Index 114.
Tascam MMP-16 Owner’s Manual • Index 115 Index 9 9-pin serial operation .............................................................................................................................................................. 80 A AC Mains and Grounding .
Tascam MMP-16 Owner’s Manual • Index 116 D Delete ..................................................................................................................................................................................... 53 Deleting Tracks .
Tascam MMP-16 Owner’s Manual • Index 117 I Ident Assigned ........................................................................................................................................................................ 79 Ident Request ...
Tascam MMP-16 Owner’s Manual • Index 118 MIDI Connections .................................................................................................................................................................. 24 MIDI In/Thru/Out Connector .
Tascam MMP-16 Owner’s Manual • Index 119 R Rack Ears ............................................................................................................................................................................... 18 Rack Ears Kit .
Tascam MMP-16 Owner’s Manual • Index 120 Text Above Keys .................................................................................................................................................................... 33 Time Code Chase ......
Tascam MMP-16 Owner’s Manual • Index 121.
TEA C CORPORA TION 3-7-3, Nakacho, Musashino-shi, Tokyo 180, Japan Phone: (0422) 52-5082 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (213) 726-0303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: 905-890-8008 Facsimile: 905-890-9888 TEAC MEXICO, S.
Een belangrijk punt na aankoop van elk apparaat Tascam MMP-16 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tascam MMP-16 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tascam MMP-16 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tascam MMP-16 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tascam MMP-16 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tascam MMP-16 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tascam MMP-16 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tascam MMP-16 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
