Gebruiksaanwijzing /service van het product M205 van de fabrikant Tekram Technology
Ga naar pagina of 32
Rev. 1.0 11/98 USER’S GUIDE.
M205 PRO User's Manual Page 2 M205 PRO User’s Manual n n n n n n FCC NOTICE This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations.
M205 PRO User’s Manual Page 3 M205 PRO User’s Manual n n n n n n CONTENTS INTRODUCTION ......................................................................................... 5 n K EY F EATURES ...................................................
M205 PRO User's Manual Page 4 M205 PRO User’s Manual Selecting the Video Source and Adjusting the Picture Properties ....................... 18 Selecting Overlay / Preview Mode ...................................................................
Page 5 M205 PRO User’s Manual INTRODUCTION Congratulations on your purchase of the CaptureTV M205 PRO, the video capture and TV tuner card! The M205 PRO is actually two cards in one: • A built-in TV tuner brings television to your computer screen, allowing you to work and watch TV at the same time.
INTRODUCTION Page 6 M205 PRO User’s Manual The VideoCapture Utility Lets you watch up to 125 cable television channels and 70 antenna channels in smooth, full-motion video in a window or full screen. You can capture still frames and movie clips, channel surf, or create your own TV transcripts.
Page 7 M205 PRO User’s Manual HARDWARE INS TALLATION n n Components in the Package The following components should be included in your CaptureTV M205 PRO box: 1. CaptureTV M205 PRO board 6. (Optional) NICAM Daughter Board 2. “Tekram Multimedia Drivers & Utilities” CD-ROM 7.
HARDWARE INSTALLATION Page 8 M205 PRO User’s Manual n n Hardware Installation Installing the Capture Card Important : Handle circuit boards by the edges or bracket. Touch the bare metal of your computer case before handling any circuit boards to prevent static discharge damage.
HARDWARE INSTALLATION Page 9 M205 PRO User’s Manual Connecting to FM antenna (Optional) Connecting to Cable TV or Antenna Connecting the IR Sensor.
HARDWARE INSTALLATION Page 10 M205 PRO User’s Manual Connecting to External Video Sources (RCA jack) Connecting to External Video Sources (S-video).
HARDWARE INSTALLATION Page 11 M205 PRO User’s Manual Connecting to Speakers or Headphones NOTE : The CaptureTV M205 PRO audio output jack is a low-gain output suitable for headphones and powered speakers, as well as an input into stereo systems or other types of amplifiers.
Page 12 M205 PRO User’s Manual SOFTWARE INS TALLATION n n Installing the Windows 95 Device Drivers After the capture card is properly installed in the system, power on your system. Windows 95 will automatically detect the card as a Multimedia Device upon boot-up, and display a “New Hardware Found” screen like the one shown below.
SOFTWARE INSTALLATION Page 13 M205 PRO User’s Manual n n Installing the Windows 98 Device Drivers 1. After the capture card is properly installed in the system, power on your system.
SOFTWARE INSTALLATION Page 14 M205 PRO User’s Manual n n The Autorun Screen After rebooting, insert the “Tekram Multimedia Utilities & Drivers” CD-ROM into the CD-ROM drive. The Autorun screen will show up. If it does not appear, run D:AUTORUN (where D: is your CD-ROM drive).
SOFTWARE INSTALLATION Page 15 M205 PRO User’s Manual n n Installing the VideoCapture utility 1. Select Install Application on the Autorun Screen. The following dialog box appears: 2. In the Installation Directory, type the drive and directory where you want the software installed.
Page 16 M205 PRO User’s Manual VideoCapture UTILITY The VideoCapture Utility lets you watch television and playing video in a window or full screen. This application is also used for capturing still images and full-motion video from TV or a video device.
VideoCapture UTILITY Page 17 M205 PRO User’s Manual n n Control Panel To show/hide the control panel, check Show Panel from the TV menu. 1. POWER : Quits the M205 PRO VideoCapture application. 2. PC/TV : Switches between viewing in a window and full screen.
VideoCapture UTILITY Page 18 M205 PRO User’s Manual n n Video Display Selecting the Video Source and Adjusting the Picture Properties From the Options menu, choose Video Source . The Video Source dialog box appears: • Video Connector : Select video input source (TV, Composite or S-video).
VideoCapture UTILITY Page 19 M205 PRO User’s Manual Selecting Overlay / Preview Mode Select Overlay or Preview mode from the Options menu. In Overlay mode, video is transferred directly from the capture card to the memory of the display card without using any CPU resources.
VideoCapture UTILITY Page 20 M205 PRO User’s Manual Selecting View/Capture Mode To display video only, select the View Mode from the O ptions menu. In this mode, you can display video full screen or in a scalable window, but capture is not allowed.
VideoCapture UTILITY Page 21 M205 PRO User’s Manual Displaying Close Captioned Text If you are watching TV in NTSC standard or playing an NTSC videotape containing closed captioned material, you can enable the close captioned text to be displayed with the video.
VideoCapture UTILITY Page 22 M205 PRO User’s Manual n n Video Capture Note: Make sure that you have selected the Capture Mode under the Options menu. Please refer to page 20 . Changing the Settings for Video Capture Choose Capture Settings from the Capture menu to change the preferences for video capturing.
VideoCapture UTILITY Page 23 M205 PRO User’s Manual • Mouse to Abort Capture : Select the mouse button to be used for ending video capture. • Hit OK to Capture : By default the capturing begin as soon as you choose the capture command from the Capture menu.
VideoCapture UTILITY Page 24 M205 PRO User’s Manual Selecting the Video Compressor From the Options menu, choose Compression to select the video compression algorithm. The dialog box appears: • Compressor : Selects the compressor to be used. • Compression Quality : Sets the compression rate.
VideoCapture UTILITY Page 25 M205 PRO User’s Manual Specifying the File Name for Motion Video Capture Before capturing a motion video, you should first decide the name of the captured file and the location on the hard drive that the image will be stored in, or the file will be saved to the default name and path c:capture.
VideoCapture UTILITY Page 26 M205 PRO User’s Manual Capturing Motion Video Click Capture Video under the Capture menu to initiate video capture. After the movie is saved to disk, you will be shown the amount and percentage of dropped frames. After the capturing is complete, the video display will remain still.
VideoCapture UTILITY Page 27 M205 PRO User’s Manual n n The TV Tuner Show / Hide Control Panel From the TV menu, check Show Panel to display/hide the control panel (See page 17 ). The functions described below may also be operated from the control panel.
VideoCapture UTILITY Page 28 M205 PRO User’s Manual Selecting a Channel You can directly select a channel by clicking on Set Channel , the following dialog box appears: Key in the desired channel number and click OK. For channel up/down, click on Channel Forward / Channel Backward .
VideoCapture UTILITY Page 29 M205 PRO User’s Manual Channel Browsing To view all channels simultaneously, click Channel Browsing . The option is then toggled to Exit Browsing . To stop browsing, click Exit Browsing or press the Esc key on you keyboard.
Page 30 M205 PRO User’s Manual THE REMOTE CONTROL n n Using the Remote Control Included with your CaptureTV package is an infrared remote control. To use the remote, you must first hook up the IR Sensor, as shown on Chapter 2. You must aim the remote at the IR Sensor during use, so it’s recommended that you place the sensor near your monitor.
Page 31 M205 PRO User’s Manual TROUBLESHOOTING The following troubleshooting tips may help you if you experience problems. Contact your dealer for more advanced troubleshooting information. Basic Troubleshooting Tips • Check that the card is seated properly in its expansion slot.
Page 32 M205 PRO User’s Manual n n n APPENDIX n n DirectX 6.0 Installation for Microsoft Windows 95 1. Ensure that Windows 95 is up and running properly. 2. Insert the Tekram Multimedia Drivers & Utilities CD-ROM into your CD-ROM drive. 3. Under Start… Run of the task bar, TYPE in X:DIRECTX6DXSETUP (X is the letter of your CD-ROM drive).
Een belangrijk punt na aankoop van elk apparaat Tekram Technology M205 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Tekram Technology M205 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Tekram Technology M205 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Tekram Technology M205 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Tekram Technology M205 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Tekram Technology M205 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Tekram Technology M205 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Tekram Technology M205 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
