Gebruiksaanwijzing /service van het product 20RTH van de fabrikant Toshiba
Ga naar pagina of 31
20-INCH PREMIUM TFT-LCD MONITOR 20RTH INSTRUCTION MANUAL Please read this manual thoro ughly before us e, and ke ep it handy for future reference..
SAFETY INSTRUCTION……………………………… …………………………………….2 – 3 1. Important Safety Instructions ………………………………… …………………………2 – 3 2. Safety Precautions ……………………………… ……………………………………….
Important Safety Instructions 1). Read these instructions 2). Keep these instructions.. 3). Heed all warnings. 4). Follow all instructions. 5). Do not use this apparatus ne ar water. 6). Clean only with dry cloth. 7). Do not block any ventilation opening s.
- The apparatus shall not be exposed to dri pping or spl ashing and that no objects filled with liquids, such as vases, shall be placed on the app aratus. - Minimum distances(e.g. 10cm)around the appa ratu s for sufficient ventilation. “ WARNING - To reduce th e risk of fire o r electric shock, do not expose the apparatus to rain or moisture.
CAUTION k The power supply cord is used a s the m a in disconne ct device, ensure that the socket-outlet is located/installed near the equipme nt and is ea sily accessible. ATTENTION N Le cordon d`alimentation est utillsé co mme interrupteur général.
NOTE This equipment has been tested a nd fou nd to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. T hese limits are designe d to provide rea sonable protection against harmful interference i n a residential installation.
A. BOTTOM PANEL CONTROL 1. DC 15V (12V) IN 2. COMPONENT Y,Pb,Pr & SOUND L,R 3. AUDIO OUT 4. PC STEREO IN 5. D-SUB IN 6. DVI IN 7. HDMI IN B. SIDE PANEL CONTROL 1. VIDEO 1(AV1) IN 2. VIDEO 1(AV1) OUT 3. VIDEO 2(AV2) IN 4. VIDEO 2(AV2) OUT 5. S-VIDEO (Y/C) IN 6.
C. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or O FF. There will be a few seconds delay before the d isplay appears. 2. SOURCE Select pc or video( AV1/AV2/S-Video/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. MUTE Mute the sound.
D. FRONT KEY CONTROL 1. MENU Activates and exits the On Screen Display. 2. SOURCE Select PC or video source. Select On Screen Display menu 3 / 4. ▼ / ▲ This button allows user to enter t he sub-menu of the activated function 5 / 6. VOL ◀▶ Adjust the volume / Adjust menu settings.
A: CUSTOM MENU (Only PC mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Cu stom menu. Press the up( ▲ ) / down( ▼ ) button to sel ect Custom sub menu. Press (◀) / right( ▶ ) button to adjust picture setting. Press the MENU button to save.
B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Picture / Sound. Press the right( ▶ ) or ENTER button. 1. Picture Mode Press the up( ▲ ) / down( ▼ ) button to sel ect the Picture Mode.
2. Color Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the Color Tone. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired color tone.
3. Mute Press the up( ▲ ) / down( ▼ ) button to select the Mute. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Mute. Press the MENU button to save. 4. Volume Press the up( ▲ ) / down( ▼ ) button to select the Volume.
5. Size Press the up( ▲ ) / down( ▼ ) button to sel ect the Size. Press the ( ▶) or ENTER button and then up( ▲ )/down( ▼ ) button t o select the desired Size. Press the MENU button to save. 6. NR Press the up( ▲ ) / down( ▼ ) button to sel ect the NR.
Press the ( ▶) or ENTER button and then up( ▲ ) / down( ▼ ) button to select on or off. Press the MENU button to save 6. PC (Only PC mode) Press the up( ▲ ) / down( ▼ ) button to sel ect the.
Press the up( ▲ ) / down( ▼ ) button to sel ect PC sub m enu Press the right( ▶ ) or ENTER button and then left (◀ ) / right( ▶ ) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elem ents.
1. PIP Press the up( ▲ ) / down( ▼ ) button to sel ect the PIP. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the On or Off. Press the MENU button to save. 2. Input Source Press the up( ▲ ) / down( ▼ ) button to sel ect the Input Source.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Input Source. Press the MENU button to save.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Size. Press the MENU button to save. 4. Position Press the up( ▲ ) / down( ▼ ) button to sel ect the Positi on.
Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Position. Press the MENU button to save. 5. Swap Press the up( ▲ ) / down( ▼ ) button to sel ect the Swap.
5. Sound Select Press the up( ▲ ) / down( ▼ ) button to sel ect the Soun d Select. Press the right( ▶ ) or ENTER button and then pre ss up( ▲ ) / down( ▼ ) button to select the desire Sound Select.
D. SETUP MENU Press the MENU button and then up( ▲ ) / down( ▼ ) button to select the Setup me nu. Press the right( ▶ ) or ENTER button . 1.Reset Press ENTER button to select the reset Reset : Select to reset all setting to the factory default values.
2. Language Press the up( ▲ ) / down( ▼ ) button to sel ect the Language menu. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to sel ect language.
3. OSD Tone Press the up( ▲ ) / down( ▼ ) button to sel ect the OSD t one menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to sel ect the desire OSD Tone.
4. Blue Screen Press the up( ▲ ) / down( ▼ ) button to sel ect the blue screen. Press the right( ▶ ) or ENTER button. Press the up( ▲ ) / down( ▼ ) button to select on or off.
5. Key Lock Press the up( ▲ ) / down( ▼ ) button to sel ect the key lock menu. Press the right( ▶ ) or ENTER button Press the up( ▲ ) / down( ▼ ) button to select on or off Press the MENU button to save.
Us e the VESA standard mount ing design and the 100m m hole pattern on the back panel to install the LCD monitor to the (optional) mounting bracket sold separately. Wall-mount Installation 1. Remove the monitor stand bracket assembled with the monitor.
▶ PIN ASSIGNMENTS ▶ ACCESSORY INSTRUCTION MANUAL ……………………………………… ……………………………………… 28 2. Power Cord 1.
This monitor features a power m anagement sy stem to “power d o wn” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs th is signaling system through not sending horizontal, vertical, or sync signal.
20“ 20.1 ˝ Diagonal AM-TFT(A ctive-Matrix) Pixel pitch(mm) : 0.255(H) x 0.255(V) BRIGHTNESS: 300cd/ ㎡ (Typical) CONTRAST RATIO: 800:1(Typical) VIEWING ANGLE: 178 ° /178 ° (H/V) LCD- Type RESPONSE TIME: 16msec(Typical) RESOLUTION (H x V) 1600X1200 @60Hz FREQUENCY HORIZONTAL: 31- 80KHz VERTICAL: 56-75Hz VIDEO(2ch input 1.
WEEE Symbols 31 ………………………………… ………………………………………… INSTRUCTION MANUAL “ Going to Sleep” message on screen Correct Disposal of This Product (Wa.
Een belangrijk punt na aankoop van elk apparaat Toshiba 20RTH (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba 20RTH heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba 20RTH vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba 20RTH leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba 20RTH krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba 20RTH bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba 20RTH kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba 20RTH . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
