Gebruiksaanwijzing /service van het product 40L2200U van de fabrikant Toshiba
Ga naar pagina of 139
GMA300014012 7/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defin ition digit al cable program, or a High De finition Satellite program). For det ails, co ntact your TV antenna installer , cable provider , or satellite provider .
2 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV . Before operating your LED TV , carefully read this manual completely .
3 Important Safety Instructions 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings .
4 24) When selecting a location for the TV : • NEVER allow any part of th e TV to hang over the edge of the suppor ting furniture. • NEVER place the TV on tall fu rniture (for example, ente rtainment cen ters or bookca ses) without anchoring both the fu rniture and the TV to a suitabl e support.
5 38) W ARNING: RISK OF ELE CTRIC SHOCK ! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightening storm, do not touch the connecting cabl es or prod uct.
6 Note : Extreme care should always be used when removing the pedest al stand to avoid damage to the LCD pa nel. 2) Remove the screws shown in the below di agram. This will allow removal of the pedestal st and. 3) Once you have removed the screws holding the pedestal st and in place, remove the pedest al stand from the TV .
7 FCC Declaration of Conformity Compliance Statement (Part 15): T oshiba 32L2200U, 40L2200U, and 50L2200U T elevision models comply with Part 15 of the FCC Rules.
8 T rademark Information • ClearFrame, C ableClear , ColorStream, DynaLight, GameTimer , SurfLock are trademarks or re gistered trademarks of T oshiba Am erica Information Systems, Inc. and/or T oshiba Corp oration. • Audyssey EQ ® provides clear , accurate, and natural sound right out of the box.
9 Contents Chapter 1: Introduction ... ......................... ..................... ............. 15 Features ..................................................................16 Overview of installation, setup, and use ..................17 TV front and side panel controls and connections .
10 Contents Connecting a Blu-ray™/DVD Pl ayer/Satellite receiver with ColorStream ® (component video), or a VCR ...........................................................27 Connecting an HDMI ® or DVI device to the HDMI ® input..................
11 Contents Labeling the video input sources ............................ 63 Tuning channels using the Channel Browser ..........65 Favorites browser ............................................. 66 Elements of the Channel Browser ....................
12 Contents Using the digital audio selector ......................... 84 Selecting stereo/SAP broadcasts ......................85 Adjusting the audio quality ................................ 86 Audyssey Premium Television™ (50L2200U only) .........
13 Contents No Signal Power Down .........................................110 Using HDMI ® CEC ................................................. 111 HDMI ® CEC playback device (DVD player, etc.) control ......................... 111 Other HDMI ® CEC functions .
14 Contents Audio power .................................................... 128 Speaker type .........................................................128 Video/audio terminals ...........................................128 Video/audio input .........
15 Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to a void potential hazards that could result in personal injuri es, damage to your equipment, or loss of data.
16 Introd uctio n Fe a t u r e s Features The follo wing are just a few of th e many e xciti ng features of your new T o shiba wide screen, in tegrated HD, LED TV : ❖ Integrated digital tu ning (8VSB A TSC and QAM) — Eliminates the n eed for a separate d igital conv erter set-top box (in most cases).
17 Introduction Overview of installation, setup, and use Overview of installa tion, setup, and use Follo w these steps to set up your TV and begin using its many exciting features. 1 Carefully read the importan t safety , installation, care, and service information.
18 Introd uctio n TV fr ont and side panel contr ols and conn ections 10 Program channels into the TV’ s channel memory . See “ Aut o T uning” on page 53 . 11 For details on using the TV’ s features, see chapters 6 and 7. 12 For hel p, refer to “T rou bleshooting” on page 121 .
19 Introduction TV fr ont and side panel contr ols and connections 3 PO WER —T urn s the TV On/Off . If the TV stops responding to the buttons on the remote control or TV control pane l and you cannot turn off the TV , press and hold the PO WER button on the TV control panel for a few seconds to reset the TV .
20 Introd uctio n TV bac k panel connections TV back panel connections For e xplanations of cable types and connections, see “Overvie w of cable types” on page 22 .
21 Introduction TV back panel connections 4 ColorStream ® HD —High-resolution comp onent video in put and shared composite video input . See “Connecting a Blu-ray™/D VD Player/Satellite receiver with ColorStream® (component video), or a VCR” on pa ge 27 .
22 Chapter 2 Connecting Y our TV Overview of cable types Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most st ores that sell audio/video devices.
23 Connecting Y our TV Overview of cable types Standard A/V cables (composite video) usually come in sets of three, and connect to video de vices with analog audio and composite video outpu t.
24 Connecting Y our TV Overview of cable types Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connect s recei vers with Dolby ® Digital or PCM (pulse-code modulation) optical audi o input to the TV’ s Digital Au d i o O u t terminal.
25 Connecting Y our TV Connecting a VCR, anten na, cable TV , or camcor der Connecting a VCR, antenna, cable TV , or camcorder (Sample Illustration) 32L2200U/40L2200U Connecti ng to a VCR, antenna, ca.
26 Connecting Y our TV Connecting a VCR, antenna, cable TV , or camcor der When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV . When you use ColorStream ® HD or Video, switch to the appropriate A V input mode.
27 Connecting Y our TV Connecting a Blu-ra y™/D VD Pl ayer/Satellite r eceiver with Connecting a Blu-ray™/DVD Player/Satellite receiver with ColorStream ® (component video), or a VCR (Sample Illu.
28 Connecting Y our TV Connecting a Blu-ray™/D VD Pla yer/Satellite receiver with ❖ Component video cable s ❖ Y ou can connect the com ponent video cab les (plus audio cables) from the D VD player or satellite receiv er to the COLOR STREAM HD terminal in the TV .
29 Connecting Y our TV Connecting an HDMI ® or DVI de vice to the HDMI ® input Connecting an HDMI ® or DVI device to the HDMI ® input The HDMI ® input on your TV recei ves digital audio and uncompressed digital video from an HDMI ® source de vice, or uncompressed digital video from a D VI (Digital V isual Interface) source de vice.
30 Connecting Y our TV Connecting an HDMI ® or D VI device to the HDMI ® input (Sample Illustration) 32L2200U/40 L2200U Series - Connecting an HDMI ® or D VI device to the HDMI ® input (Sample Ill.
31 Connecting Y our TV Connecting an HDMI ® or DVI de vice to the HDMI ® input (Sample Illustration) 32L2200U/40L2200U - DVI connections (Sample Illustration) 50L2200U - D VI connections T o ensure .
32 Connecting Y our TV HDMI ® CEC connection HDMI ® CEC connection Y ou can control the basic functions of connected audio/video devices using the TV’ s remote control if you connect a HDMI ® CEC-compatible audio receiv er or playback de vice. The HDMI ® CEC Control feature uses CEC technology as regulated by the HDMI ® standard.
33 Connecting Y our TV Connecting a digital audio system ❖ If several devices are connected, the HDMI ® CEC Con trol feature may not operate properly . ❖ For proper operation, it is recommended that you use an HDMI ® cable with the HDMI ® Logo ( ).
34 Connecting Y our TV Connecting a digital audio system (Sample Illustration) L2200U series - Connecting a digi tal audio system T o control the audio: 1 T urn on the TV and the digital audio device. 2 Press the MENU button on the remote control and open the Sound m enu.
35 Connecting Y our TV Connecting an analog audio system 5 Press the ( / arrow) b u ttons to select either Dolby Digital or PCM , depending on your device. (Sample Illustration) A udio Setup scr een - Done 6 T o sav e the new settings, highlight Done , and then press the ENTER button.
36 Connecting Y our TV Connecting a computer Y ou will need standard audio cables. (Sample Illustration) 32L2200U/40L220 0U- Connecting an analog audio system (Sample Illustration) 50L2200U Series - C.
37 Connecting Y our TV Connecting a computer Connecting a computer to the TV’ s PC IN terminal When connecting a computer to the PC IN terminal on the TV , use an analog RGB (15-pin) computer cable and a PC audio cable. F or more information, see “Overvie w of cable types” on page 22 .
38 Connecting Y our TV Connecting a computer T o display the optimum pict ure, us e the computer setting feature, see “Using the PC Settings feature” on page 100 . ❖ The PC audio input terminals on the TV are shared with the HDMI 1 analog audio input terminals.
39 Connecting Y our TV Connecting a computer (Sample Illustration) 32L2200U/40L2200U - Connecti ons to HDMI ® terminal (Sample Illustration) 50L2200U - Connections to HDMI ® terminal The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 1080i (60H z), and 1080p (24Hz/60Hz).
40 Connecting Y our TV Connecting a computer ❖ The edges of the picture may be hidden. ❖ If receiving a 480i (HDMI ® ), 480p (HDMI ® ), 720p, 1080i, or 1080p signal program, Native mode scales the vide o to display the entire picture within the borders of the screen (i.
41 Chapter 3 Using the Remote Control Installing batteries T o install batteries: 1 Re move the b att e ry cove r fr o m t h e back of the remote control. (Sample Illustration) Removing the r emot e back cover 2 Insert two AAA batteries, corresponding to the (+) and (-) markings on the battery compartm ent.
42 Using the Remote Control Installing batteries ❖ Be sure to use AAA size batteries. ❖ Dispose of batteries in a designated disposal area. ❖ Always consider the environment when disposing of batteries. Always follow applicable laws and regulations.
43 Using the Remote Control Remote contr ol effective r ange Remote control effective range For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remo te control and the TV .
44 Using the Remote Control Learning about the r e mote contr ol Learning about the remote control The buttons used for operating the TV are described below . For the HDMI ® CEC remote co ntrol functions, see “HDMI® CEC playback device (D VD player , etc.
45 Using the Remote Control Learning about the remote contr ol 1 The PO WER button turns the TV On/Off . When the TV is on, the power LED indicator on the TV front glows green. 2 The PIC SIZE b utton cycles through the picture sizes. See “Selecting the picture size” on page 71 .
46 Using the Remote Control Learning about the r e mote contr ol 18 The Arrow buttons ( / / / ) select or adjust programming menus when a menu is on-screen. 19 The Arrow buttons ( / ) open th e Channel Browser and tune to the previous/nex t channel in the channel history when TV programming is on-screen.
47 Chapter 4 Menu Layout and Navigation Main menu layout The tables below and on the fo llowing pages provide a quick ov erview of your TV’ s menu system. T o open the Installation menus (illustrated below), press MENU on the r emote contro l or TV control panel.
48 Menu Layout and Navigation Main menu layout Preferences CC Selector Launches the temporary CC Selector Base CC Mode Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4 Digital CC Settings Opens the Digital CC Setup me.
49 Menu Layout and Navigation Setup/Installation me nu layout Setup/Installation menu layout The Installation menu contains th e T errestrial and System Status menus. T o open the Installation menu, press the MENU button on the remote control or TV control panel, open the Setup menu, selec t Installation , and then press the ENTER b ut ton.
50 Menu Layout and Navigation Navigating th e menu system 4 All menus close automatically if you do not make a selection within approximately 60 seco nds, except the signal meter menu, which closes automatically after a fe w minutes. 5 T o close a menu instantly , press the EXIT button.
51 Chapter 5 Setting up your TV Initial Setup When you f irst turn on or reset the TV , the Initi al Setup windo w will appear . 1 In the M enu Lang uage field, press the ( / arro w) buttons to select your preferred language. 2 Press the ( / arrow) buttons to select Tim e Zo n e Se t up .
52 Setting up you r TV Initial Setup Menu language Y ou can choose from three dif ferent menu language settings (English, Français, and Español) fo r the on-screen display of menus and messages. T o select the me nu language: 1 Press t h e MEN U button, open the Pr eferences menu, and then highlight Men u Language .
53 Setting up your TV Storing channels in memory (optional) 3 Open the T errestrial me nu, highli ght Input Conf iguration , and then press the ENTER button. (Sample Illustration) T err est rial menu - Input Configuration selection 4 Highlight ANT/CABLE In and press the ( / arrow) b u ttons to select the input source ( Cable or Antenna ).
54 Setting up you r TV Storing channels in memory (optional) ❖ Y ou must set up the ANT/CABLE input source before programming channels. See “ANT/CABLE IN” on page 52 . ❖ The automatic channel progr amming process will erase channels that were previously programmed into the TV’ s memory .
55 Setting up your TV Storing channels in memory (optional) A new set of Installation menu icons appears. 4 Open the T errestrial me nu, highli ght Channel Program to open the Start Scan window , and then press the ENTER button to begin channel programming.
56 Setting up you r TV Setting channel skip Setting channel skip T o prev ent a channel from being viewed, you can set it to be skipped. 1 From the Set up menu, highl ight Installation , and then press the ENTER button. 2 Press the ( / arrow) b uttons to select Channel Options , and then press th e ENTER b utton.
57 Setting up your TV Setting the A V input mode Skipped channels cannot be selected with the CH arrow buttons, however , they can be accessed using the number keys on the remote control.
58 Setting up you r TV V iewing the digital signal meter 3 Press the ( / arrow) buttons to select HDMI 1 A udio , and then press the ( / arrow) b u ttons to select the HDMI 1 audio mode ( Au t o , Digital , or Analog ). ( Au t o is the recommended mode.
59 Setting up your TV Setting the time zone T o view the digital signal meter: 1 Press t h e MENU button and open the Setup menu. 2 Highlight Install ation , and then press the ENTER button. A new set of Installation menu icon s appears. 3 Open the T errestrial me nu, highli ght Signal Meter , and then press the ENTER button.
60 Setting up you r TV V iewing the system status Viewing the system status 1 Press t h e MENU button and open the Setup menu. 2 Highlight Install ation , and then press the ENTER button. A new set of Installation menu icons appears. 3 Open the System Status menu, highlight System Information , and then press the ENTER b ut ton.
61 Chapter 6 Using the TV’ s f e a t u r e s Selecting the video input source T o select the video input source to view: 1 Press t h e INPUT button on the remote control or TV control panel.
62 Using the TV’ s features Selecting the video input sour ce The current signal source displays in the top right corner of th e Input Selection screen. (Sample Illustration) Input Selection scr een ❖ Y ou can label the video input sources according to the specific devices you have connected to the TV .
63 Using the TV’ s features Labeling the video input sources ❖ When you select HDMI ® CEC input sources from the pop-up window using the INPUT button, some HDMI ® CEC devices may automatically turn on.
64 Using the TV’ s features Labeling the video input sources 2 Highlight In put Labeling , and then press the ENTER button. (Sample Illustration) Pr eferences menu - Input Labeling selection 3 Press the ( / arrow) b uttons to highligh t the video source you wish to label.
65 Using the TV’ s features T u ning channels using the Channel Br owser Input labeling example: The screen belo w left shows the def ault Input Selection screen (with none of the inputs lab eled as a specific de vice).
66 Using the TV’ s features T uning channels using the Channel Br owser Favorites browser The Fa vorites Browser allo ws you to quickly set up a fa vorite channels/inputs list that is integrated into the Channel Browser . T o add a fav orite channel/input: 1 T une to the channel or input .
67 Using the TV’ s features T u ning channels using the Channel Br owser 5 Press the ( arrow) b utton to high light Inputs List , and then press the ( / arrow) b uttons to select On or Off . 6 Press the ( arrow) b utton to high light Fa vorites List , and then press the ( / arrow) buttons to select On or Off .
68 Using the TV’ s features T uning channels using the Channel Br owser 3 Channel or input currently being vi ewed. 4 Channel or input that is currently high lighted in the browser .
69 Using the TV’ s features T u ning channels using the Channel Br owser Adding and clearing channels and in puts in the History List As a channel or input is tuned, the Channel Browser adds it to the History Li st and displ ays it on th e right side of the Channel Browser .
70 Using the TV’ s features T uning channels using the Channel Br owser T uning to a specific channel (programmed or unprogrammed) T o tune analog channels: Press the Channel Number (0–9) on the remot e control. F or example, to select ch annel 125, press 1, 2, 5, and then press the ENTER button.
71 Using the TV’ s features Selecting the picture size 2 Press and hold the CH R TN button for a few seconds until the message “Memorized” appears on the screen. The channel has been programmed to the CH R TN button. 3 Y ou can then change channels repeatedly , and when you press the CH R TN button, the memorized channel will be tuned.
72 Using the TV’ s features Selecting the pictur e size T o select the picture size using the menus: 1 Select Picture Size in the Theater Settings menu. 2 Press the ( / arrow) b utton s to select the desired picture size setting. 3 Highlight Do ne , and then press the ENTER button.
73 Using the TV’ s features Selecting the picture size The Full setting is for v iewing in 1080i, 1080p, and 720p program source. (Sample Illustration) Picture size - Full The edges of the picture may be hidden. TheaterWide 1 This setting is for vi ewing in 4:3 format programs.
74 Using the TV’ s features Selecting the pictur e size TheaterWide 3 This setting is for viewing letter box programs with subtitles. (Sample Illustration) Pictur e size - TheaterW ide 3, letter box with subtitles The picture’ s top and bot tom edges are hidden*.
75 Using the TV’ s features Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display wi th sidebars and/or bars at the top and bottom . Normal This setting is for viewing VGA, SV GA, XGA, WXGA, and SXGA sources.
76 Using the TV’ s features Scr olling the TheaterW ide ® picture (TheaterW ide 2 and 3 only) Scrolling the TheaterWide ® picture (TheaterWide 2 and 3 only) Y ou can set separate scroll settings for the TheaterW ide 2 and TheaterW ide 3 modes for each input.
77 Using the TV’ s features Using the A uto Aspect featur e Using the Auto Aspect feature When this feature is set to On, th e TV will automatically select the picture size when one of the following.
78 Using the TV’ s features Selecting the Cinema Mode Selecting the Cinema Mode When you view a D VD (3: 2 pulldown processed) from a D VD player connected to the VIDEO , ColorStr eam ® HD (component video), or HDMI ® inputs on the TV , smoother motion can be obtained by setting the Cinema Mode to Film .
79 Using the TV’ s features Adjusting the pictur e Adjusting the picture Selecting the picture mode Y ou can select your desir ed picture settings from the modes described below . PC mode is available for HDMI ® and PC inputs only (grayed out for other input sources).
80 Using the TV’ s features Adjusting the pictur e 3 Press the ( / arrow) b ut tons to sel ect the picture mode you prefer , and then press the ENTER button.
81 Using the TV’ s features Using closed captions 3 Press the ( / arrow) b uttons to select the picture quality you wish to adjust (C ontrast, Backlight, D ynaLight, Brightness, Color , Tint, or Sharpness), and then press the ( / arro w) buttons to adjust the setting.
82 Using the TV’ s features Using closed captions If the program or video you selected is not closed captione d, no captions will display onscreen. T o view text, highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may a ppear on screen.
83 Using the TV’ s features Using closed captions 3 Press the ( / arrow) b ut tons to highl ight the characteristic you wish to change, and then press the ( / arrow) buttons to select the format for that characteristic. 4 T o sav e the new settings, highlight Done , and then press the ENTER button.
84 Using the TV’ s features Adjusting the audio 4 Press the EXIT button. Adjusting the audio Muting the sound Press the MUTE b utton to partially red uce (1/2 Mute) or turn off (Mute) the sound. E ach time you press the MUTE button, the mute mode changes in the fo llowing order: 1/2 Mute, Mute, V olume, 1 /2 Mute, etc.
85 Using the TV’ s features Adjusting the audio 2 Highlight Di gital A udio Selector , and then press the ENTER button. (Sample Illustration) Sound menu - Digital Audio Selector selectio n 3 Press the ( / arrow) b uttons to select Digital A udio , and then press the ( / arrow) buttons to select the desired service.
86 Using the TV’ s features Adjusting the audio T o listen to an alternate language on an A T SC digital station (if av ailable), high light the Language field in step 3 above, and then press the ( / arrow) b utt ons to select the language you prefer .
87 Using the TV’ s features Adjusting the audio Audyssey Premium T elevision™ (50L2200U only) These tele visions use a suite of technologies for bet ter sound quality , including the following: ❖ A udyssey EQ ® —provides clear , accurate and natural sound right out of the box.
88 Using the TV’ s features Adjusting the audio When you use ColorStream ® H D or V ideo, switch the A V input mode as appropriate. 32L2200U and 40L2200U models do not support Audyssey Dynamic Volume ® .
89 Using the TV’ s features Using the Locks menu Using the Dolby ® Digital Dynamic Range Control feature Y ou can furth er compress Dolby ® Dig ital dynamic range, allowing you to switch from digital to anal og broadcasts at the same dynamic range.
90 Using the TV’ s features Using the Loc ks menu 2 Press the ( arro w ) button to display the PIN code entry screen. The Lock System screen appear s if a PIN code has not been stored.
91 Using the TV’ s features Using par ental contr ols (for USA r e gion) 3 Enter your four -digit PIN code, and then press the ENTER button. 4 Press the ( arro w ) button to highlight New PIN Code , and then press the ENTER button. 5 Press the Number buttons to enter a new four -digit code.
92 Using the TV’ s features Using par ental contr ols (for USA re gion) 6 Press the ( arro w ) button to highlight Edit Rating Limits , and then press the ENTER button. The Edit Rating Limits screen appears. 7 For each desired selection, press the ( // / arro w) buttons to highlight the selection, and then press the ENTER button to select it.
93 Using the TV’ s features Using par ental contr ols (for USA r e gion) ❖ The Alt RS button will be available only if an additional rating system is currently available. ❖ It may take several minutes for the TV to download the additional rating system.
94 Using the TV’ s features Using par ental contr ols (for USA re gion) Independent rating system for movies: Indication other than rating system: If you place an “X” in the box next to “None” Rated, programs rated “None” or “Not Rated” will be blocked.
95 Using the TV’ s features Using par ental contr ols (for USA r e gion) Displaying ratings T o display the rating of the program you are watching, press th e INFO button on the remote control. If it is rated “None, ” then the word “NONE” appears in the INFO screen.
96 Using the TV’ s features Using par ental contr ols (for USA re gion) Rating system for programs in English: Rating system for programs in French: Unlocking programs temporarily If you try to tune to a program that exceeds the rating lim its you hav e set, the TV w ill enter pr ogram lock mode and a warning message will appear on the screen.
97 Using the TV’ s features Using the Inpu t Lock featur e Using the Input Lock feature Y ou can use the Input Lo ck feature to lock th e video inputs (V id eo, ColorStream ® HD, HDMI 1, HDMI 2, and PC) and channels 3 and 4. Y ou will not be able to view the input sources or channels until you unlock the inputs.
98 Using the TV’ s features Locking c hannels 3 Press the ( / arrow) b u ttons to select Channel Options , and then press the ENTER button. The list of channels appears. (Sample Illustration) Channel options 4 Press the ( arrow) b utt on, and then press the ( / a r r o w ) buttons to select a c hannel in the lock column.
99 Using the TV’ s features Locking c hannels T o cancel the GameTimer ® , select Off in step 3 ab ove. T o deacti vate the Input Lock after the GameTimer ® has acti vated it: ❖ Set the In put Lock to Off . For instructions, see “Using the Input Lock feature” on page 97 .
100 Using the TV’ s features Using the PC Settings featur e T o unlock the control panel, select Off in step 5 in this section or press and hold the VO L U M E ( – ) button on the TV control panel for approximately 15 seconds until th e volume icon appears.
101 Using the TV’ s features Using the PC Settings feature 5 Press the ( / arrow) b uttons to make the appropriate adjustments. (Sample Illustration) PC S ettings - adju stments screen The screen is disrupted momentarily while adjusting the PC settings.
102 Using the TV’ s features Using the Media Player ❖ No: When viewing the PC input, there will be no audio. Because the PC and HDMI 1 inputs share the same set of ana log audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting.
103 Using the TV’ s features Using the Media Player ❖ Gently insert the USB device into the port and do not remove while viewing Media Player . ❖ USB device: USB Mass Storage Class devic e (MSC). ❖ Connectivity is not guara nteed for all devices.
104 Using the TV’ s features Using the Media Player If you repeatedly insert and remove the USB conne ctor , the prompt may not appear . 2 Press the ( / arro w ) buttons to se lect Ye s , and then press the ENTER button. The Media Player menu appears.
105 Using the TV’ s features Using the Media Player Viewing photo files There are three types of view modes: multi vie w , single view , and slide show . Multi View This view allo ws you to search fo r photos in a grid format. These pictures are displayed using thum bnail data in each image file.
106 Using the TV’ s features Using the Media Player ❖ Press to rotate th e image 90° counterclockwise. Pr ess to rotate the image 90° clockwise. Slide show This view allo ws you to watch a slide show of the photos. In this mode, only files located in the se lected directory will be played.
107 Using the TV’ s features Using the Media Player 2 Select the desired folder and press the ENTER button to move to the next layer . Press the CH R TN b utton to move back to the previous layer . 3 W ith the desired file selected, press the ENTER button or the PLA Y button to start playback.
108 Using the TV’ s features Using the Media Player 3 Select a music file and press the ENTER button to start playback. 4 Press CH RETURN twice to mov e back to photo view mode.
109 Using the TV’ s features Setting the sleep timer During playback, you can adjust the SOUND menu functions from the Quick Menu. Sorting, T otal Time display may not be available in all c ases. Setting the sleep timer Y ou can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours).
110 Using the TV’ s features Automatic P ower Down T o display th e time remaining until the TV turns off, press the SLEEP button. T o cancel the sleep timer , repeatedly press SLEEP until it is set to 0 minutes.
111 Using the TV’ s features Using HDMI ® CE C 3 Press the ( / arrow) b utton s to highlight the item you want to change, and then press the ( / arro w) butt ons to select On or Off . ❖ Default setting for this feature is On. ❖ A warning message will appear 1 minute before the TV turns off.
112 Using the TV’ s features Using HDMI ® CEC HDMI ® CEC Player Control menu functions T o control the HDMI ® CEC player from the menu: 1 Press MENU and open the Pr eferences menu. 2 Highlight HDMI ® CEC Player Co ntrol, and then press the ENTER button.
113 Using the TV’ s features Using HDMI ® CE C HDMI ® CEC input source selection If an HDMI ® CEC device with HDMI ® switching capability (such as an Audio Recei ver) is connected to the HDMI ® input, you can select another HDMI ® CEC de vice that is connected to the master HDMI ® de vice using the TV’ s INPUT button.
114 Using the TV’ s features Displaying TV status information When you turn on the Audio Receiver , change its input s ource, or adjust the sound volume, the sound will be output from the audio receiver’ s speakers even if TV Speakers have been selected.
115 Using the TV’ s features Understanding the Last Mode Me mory feature ❖ Digital signal strength indicator (bar graph in lower right corner of box; for A TSC signals only ) ❖ Stereo, Mono, or .
116 Chapter 7 Using the TV’ s Advanced Features Using the advanced picture settings Dynamic Contrast Dynamic Contrast detects changes in picture quality that af fect the appearance of your contrast settings , and then automati cally adjusts the video.
117 Using the TV’ s Advanced Features Using the advanced pictur e settings 4 Press the ( / arro w) buttons to select High , Middle , Low , or Off . Static Gamma The static gamma feature lets you ad just the lev els of black in the picture. T o adjust the static gamma settings: 1 Press t h e MENU button, and open the Picture menu.
118 Using the TV’ s Advanced Features Using the advanced picture settings T o select the color temperature: 1 Press t h e MENU bu tton and open the Pictur e menu . 2 Highlight Picture Settings , and then press the ENTER b u tton. 3 Highlight Advanced Picture Sett ings , and then press the ENTER button.
119 Using the TV’ s Advanced Features Using the advanced pictur e settings 3 In the CableClear field, select the desired setting. The av ailable selections are Off , Low , Middle , and High . Low , Middle , and High will reduce the noise in varying degrees, from lo we st to highest, respectively .
120 Using the TV’ s Advanced Features Using the advanced picture settings T o use the Game Mode feature, the current video input must be Video, ColorStream ® HD, HDMI 1, or HDMI 2. The Game Mode cannot be turned on when any other video input (other than the above-mentioned) is selected.
121 Chapter 8 T roubleshooting General troubleshooting Before calling a service technician, re vi e w this chapter or visit the T oshiba technical support W eb site at support.toshiba.co m for possible causes and solutions for the problem you are experiencing.
122 T roubleshooting Pictur e pr oblems Other pr oblems. If your TV’ s problem is not addresse d in th is T r oubleshooting section or the recommended solution has not worked, then use the Reset Factory Defaults procedure. For instructions, see “Resetting Factory Def aults” on page 60 .
123 T roubleshooting Sound pr oblems V ideo Input Selection problems. If the Input Selection window does not appear when you press INPUT on the remote control or TV , try pressing INPUT a second time. This will cause a change to the ne xt video input source and will display the Input Selection win dow .
124 T roubleshooting Remote con tr ol pr oblems If you hear no sound, try setting the MTS feature to Stereo mode. See “Selecting stereo/SA P broadcasts” on page 85 . If you are not receiving a second audio program from a known SAP source, make sure the MTS feature is set to SAP mode.
125 T roubleshooting Closed caption pr oblems If the problem p ersists, use the Re set Factory Defaults pro cedure. For instruct ions, see “Resetting Factory Defaults” on page 60 . Closed caption problems If the program or video you have selected is not closed captioned, no captions appear on the screen.
126 T roubleshooting HDMI ® pr oblems HDMI ® problems HDMI ® cables. Ensure that HDMI ® cables with the ( ) logo are used. For more information, see “Connecting an HDMI® or D VI de vice to the HDMI® input” o n page 29 . Legacy HDMI ® sources.
127 Appendix A Specifications ❖ These models comply with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compa tible with features and/or specifications that may be added in the future.
128 Specifications P ower sour ce Power source 120V A C, 60 Hz Power maximum current Power consumption Audio power Speaker type Video/audio terminals Video/audio input 32L2200U 0.9A 40L2200U 1.5A 50L2200U 1.2A 32L2200U 0.25W in standby mode 40L2200U 0.
129 Specifications Dimensions (with stand) ColorStream ® (component video) HD input HDMI ® input Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Dimensions (with stand) Mass (weight) V i deo Y : 1V(p-p), 75 ohm PR: 0.7 V(p-p), 75 ohm PB: 0.
130 Specifications Supplied accessories Operating conditions Supplied accessories ❖ Remote control with two size “ AAA” batt eries ❖ Wa r r a n t y ❖ Resource Guide ❖ Quick Start Guide ❖.
131 Specifications Acceptable signal form ats for PC IN, HDMI ® ❖ Some illustrations in this User’ s Guide are for explanation purposes and may differ from the actual unit.
132 Appendix B License Agreement License Information on th e software used in the TOSHIBA Digital TV The software pre-installed in the T OSHIBA Digital T elevisions consists of multiple, independent software components. Each software component is cop yrighted by TOSHIB A or a third party .
133 License Agreement implied. “W arranty” here includes, but not limit ed to, an implied warranty for marketability or fitness for specif ic uses. All risks associat ed with the qual ity or performance of these software components are assumed by the user .
134 License Agr eement (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the auth ors accept NO LIABILITY for damages of any kind. These conditions apply to any software deri ved fr om or based on the IJG code, not just to the unmodified library .
135 License Agreement This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion an d use of free software in commercial and fr eew are products alike. As a consequence, its main points are that: ❖ W e don't promise that this software works.
136 Index A advanced picture settings CableClear ® digital Noise Reduction 118 Color temperature 117 Dynamic Contrast 116 MPEG Noise Reduction 119 Static Gamma 117 using 116 audio adjusting quality 8.
137 Index Channel Browser elements 67 tuning channels 65 Channel Return switching between two channels 70 channels auto tuning 53 locking channels 97 skipping 56 specific channel 70 storing in memo ry.
138 Index using 102 menu layout 49 navigation 49 setup 49 N no signal power down set 110 O overv iew installation 17 setup 17 use 17 P panel lock feature using 99 parental controls blocking programs/m.
139 Index SurfLock™ switching between two channels 70 system status viewing 60 T time zone setting 59 timer sleep timer 109 troubleshooting 121 channel tuning problems 124 closed caption problems 12.
Een belangrijk punt na aankoop van elk apparaat Toshiba 40L2200U (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba 40L2200U heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba 40L2200U vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba 40L2200U leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba 40L2200U krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba 40L2200U bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba 40L2200U kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba 40L2200U . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.