Gebruiksaanwijzing /service van het product 50HP81 van de fabrikant Toshiba
Ga naar pagina of 38
The model number and serial number are on the back of your display . Record these numbers in the spaces belo w . Refer to these numbers whene ver you communicate with your T oshiba dealer about this display .
2 W ARNING: T o reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
3 Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference.
4 Dear T OSHIBA Customer W elcome to the TOSHIBA family of customers. W e hope that you will have many years of enjoyment fr om your new W ide Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions before making any adjustments, and r etain them for futur e r efer ence.
5 T able of Contents Important Safety Instructions ....................................... 3 FCC ST A TEMENT ........................................................... 6 Safety Precautions ......................................................... 7 Accessories .
6 FCC ST A TEMENT FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7 Safety Precautions W ARNING Setup Do not place the Wide Plasma Display on sloped or unstable surfaces. • The Wide Plasma Display may fall off or tip over .
8 CAUTION This Wide Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by T OSHIBA Corporation) • Speakers .
9 Accessories Accessories Supplied PLASMA DISPLAY INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC • Speakers PSS501 • Pedestal PTS501 • W all-hanging bracket (v.
10 Remote Control Batteries Requires two AA batteries. 1. T urn the transmitter face down. Press and slide of f the battery cover . 2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment).
11 Basic Controls R - ST ANDBY G POWER ON INPUT – VOL + Main Power On/Off Switch V olume Adjustment Push the V olume Up “ + ” or Down “–” button to increase or decrease the sound volume level.
12 Connections T o tighten: Pull Pull T o loosen: Push the knob S-VIDEO VIDEO VD HD P R /C R /R P B /C B /B Y/G L R L R AUDIO AUDIO AUDIO SERIAL TUNER IN PC IN COMPONENT/RGB IN A V IN A V IN connector.
13 Connections 1 2 1 3 2 Remove the tubes from the ends of the speaker cables. Speaker connection When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker installation manual for details on speaker installation.
14 Connections A V Input connection VIDEO signal connection (VCR) Audio OUT Video OUT RL VIDEO RCA-BNC video cable Video input to BNC connector Audio input to L/R connectors AUDIO 2 × RCA audio cable.
15 Connections COMPONENT/RGB Input connection RGB signal (R, G, B, HD, VD) connection DVD Player Audio OUT RL DVD (Y,P B , P R ) OUT YP B P R Audio input to L/R connectors RCA-BNC adapter plug (suppli.
16 Connections PC Input connection Notes: (1) Computer signals which can be input are those with a horizontal scanning frequency of 15.5 to 1 10 kHz and vertical scanning frequency of 48 to 120 Hz. (However , signals exceeding 1200 lines may not be displayed properly .
17 Connections SERIAL connection Notes: (1) Use the RS-232C cable to connect the computer to the Wide Plasma Display . (2) The computer shown is for example purposes only .
18 Power ON/OFF Connecting the plug to the W all Outlet Push the POWER switch on the Wide Plasma Display to turn the set on POWER-ON Power Indicator: Green Example: The screen below is displayed for a while after the Wide Plasma Display is turned on. (setting condition is an example.
19 Select the Input Signal R - STANDBY G POWER ON INPUT – VOL + – VOL + INPUT Press the INPUT button to select the input video signal desired from equipment such as a VCR which has been connected to the Wide Plasma Display .
20 PLASMA DISPLA Y INPUT SURROUND VOL NR PICTURE SOUND SET UP ASPECT PICTURE POS. /SIZE OFF TIMER PC On-Screen Menu Display from Remote Control PICTURE NORMALIZE PICTURE MENU BRIGHTNESS COLOR ST ANDAR.
21 On-Screen Menu Display from Remote Control Selecting the On-Screen Menu Language Press to select OSD LANGUAGE. Press to select your preferred language. Selectable languages English (UK) Deutsch Français Italiano Español ENGLISH (US) T o SOUND adjust menu (see page 26) T o SET UP menu (see page 30) SET UP Press to display the SET UP menu.
22 ASPECT Controls The Wide Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. PLASMA DISPLA Y SURROUND VOL NR PICTURE SOUND SET UP PICTURE POS. /SIZE OFF TIMER PC INPUT ASPECT ASPECT button The aspect mode changes each time the ASPECT button is pressed.
23 ASPECT Controls Mode NORMAL ZOOM FULL JUST AUTO Explanation NORMAL mode will display a 4:3 picture at its standard 4:3 size. ZOOM mode magnifies the central section of the picture. FULL mode will display the picture at its maximum size but with sight elongation.
24 Adjusting PICTURE POS./SIZE PLASMA DISPLA Y SURROUND VOL N PICTURE SOUND SET UP OFF TIMER PC INPUT ASPECT PICTURE POS. /SIZE R Adjusting screen ASPECT 1 2 3 Press to select the screen mode to adjust (see page 23). PICTURE POS. /SIZE Press to display the PICTURE POS.
25 Adjusting PICTURE POS./SIZE H-POS H-SIZE V -POS V -SIZE CLOCK PHASE (RGB/PC in Mode) When the Position Right “ ” button is pressed When the Position Right “ ” button is pressed When the Pos.
26 SOUND NORMALIZE AUDIO MENU BASS TREBLE ST ANDARD ON 0 0 0 BALACE SURROUND NORMALIZE NORMAL SELECT ADJUST RETURN SOUND Adjustment 1 2 Press the SOUND button to display the SOUND menu. Select to adjust each item. Press to select the desired adjustment menu.
27 SURROUND Controls SURROUND Button The benefits of surround sound are enormous. Y ou can be completely enveloped in sound; just as if you were at a concert hall or cinema. The surround setting switches on and off each time the SURROUND button is pressed.
28 PICTURE NORMALIZE PICTURE MENU BRIGHTNESS COLOR ST ANDARD 0 0 TINT COLOR TEMP NORMAL ADV ANCED SETTINGS ON PICTURE 0 0 0 SHARPNESS NORMALIZE NORMAL SELECT ADJUST RETURN PICTURE NORMALIZE PICTURE ME.
29 Note: There is little change when PICTURE is increased with a bright picture or reduced with a dark picture. PICTURE Adjustments Item PICTURE BRIGHTNESS COLOR TINT (NTSC only) SHARPNESS Effect Adjustments Less More Darker Brighter Reddish Greenish Selects the proper brightness and density for the room.
30 SET UP for Input Signals COMPONENT/RGB IN SELECT Select to match the signals from the source connected to the COMPONENT/RGB input terminals. Y , PB, PR signals “ COMPONENT ” R, G, B, HD, VD signals “ RGB ” SURROUND VOL N SOUND INPUT ASPECT PICTURE POS.
31 SET UP for Input Signals COLOR SYSTEM / AUTO Select SIGNAL from the “ SET UP ” menu during VIDEO (S-VIDEO) input signal mode. ( “ SIGNAL [VIDEO] ” menu is displayed.
32 Select SIGNAL from the “ SET UP ” menu during RGB or PC input signal mode. Press to select each item. Press to adjust. SIGNAL [ RGB ] SYNC PULL-IN RANGE H - FREQ. kHz V - FREQ. Hz H & V NARROW 31.5 60.0 CLAMP POSITION SIGNAL [ PC ] SYNC PULL-IN RANGE H - FREQ.
33 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Electrical Appliances Cars/Motorcycles Fluorescent light V olume (Check whether the mute function has been activated on the remote control.
34 Specifications 50HP81 120 V AC, 50/60 Hz Max. Amps 5.5 A 2.4 W 0.7 W Drive method AC type 50-inch, 16:9 aspect ratio 3000:1 (Panel only) 500 cd / m 2 (As a set) 300 cd / m 2 1106 mm (W) × 622 mm (H) × 1269 mm (diagonal) No.
35 50HP81 EUR646527 2 × AA Size 4 p 1 p 1 sets PSS501 PTS501 PWB501 PWB502 47.6 ” (1210 mm) × 28.5 ” (724 mm) × 3.9 ” (98mm) approx. 99.2 lbs (main unit only) approx.
36 – IMPORT ANT – Limited United States W arranty Products purchased in the U.S.A. and used in Canada are not covered by these warranties. Products Purchased in Canada and used in the U.S.A. are not covered by these warranties. T oshiba America Consumer Products, Inc.
37 – IMPORT ANT – LIMITED CANADIAN W ARRANTY Products purchased in Canada and used in the U.S.A. are not covered by these warranties. Products purchased in the U.
SERVICE DIVISION/82 TOT OWA ROAD, WA YNE, NEW JERSEY 07470 NA TIONAL SERVICE DIVISION:1420B TOSHIBA DRIVE, LEBANON, TN. 37087 “www .toshiba.com/tacp” SERVICE DIVISION/327 KAMAKEE STREET , HONOLULU, HAW AII 96814, U.
Een belangrijk punt na aankoop van elk apparaat Toshiba 50HP81 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba 50HP81 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba 50HP81 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba 50HP81 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba 50HP81 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba 50HP81 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba 50HP81 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba 50HP81 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
