Gebruiksaanwijzing /service van het product ik-hd5e van de fabrikant Toshiba
Ga naar pagina of 40
CAMERA CONTROL UNIT IK-HD5E INSTRUCTION MANUAL U.S.A INFORMA TION NO TE: This equipment has been tested and f ound to comply with the limits for a Class A digital device , pursuant to Part 15 of the FCC Rules.
2 SAFETY PRECA UTIONS Safety icons This manual contains saf ety instr uctions that must be observed in order to av oid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
3 Note the follo wing instructions when installing. • Do not cov er the product with any material. • Do not place the product on any confined Inflammable material such as a carpet or blanket. • Do not place the product in a narrow space, as this ma y cause heat to buildup inside the product.
4 Protection of P ersonal Information Images taken b y the camera that rev eal the likeness of an individual person ma y be considered personal information. T o disclose, e xhibit or transmit those images ov er the inter net or otherwise, consent from such individual person may be required.
5 (3. 1) Changing the setting in A WB (Automatic White Balance) mode ........................................... 22 (3. 2) Changing gain in MANUAL mode .......................................................................................... 23 ( 4 ) PROCESS1 .
6 2. COMPONENTS (1) Camera Control Unit ...................................................................................................................... 1 (2) Accessories (a) Instruction manual ...................................................
7 3. ITEMS CONTROLLED BY THE SCREEN DISPLA Y Item A vailable selections Preset value (Factory setting) Electronic shutter MODE A UTO , MANUAL, SS MANU AL A UTO le vel -100 – 0 – 100 0 A UTO e xpos.
8 Item A vailable selections Preset value (Factory setting) Binning ON, OFF OFF D VI Monitor PC , TV PC I/P mode 1080p, 1080i 1080p RS-232C baud rate 9600bps, 19200bps 9600bps R fi lter mode MODE ON,.
9 4. NAMES AND FUNCTIONS 1234 5 8 79 6 2 10 18 1 9 17 3 11 1 9 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 3 4 2 1 ON OFF 50 59.94 IN OUT FORMA T SYNC KEY LOCK DC IN 12V REMOTE 3G/HD-SDI SYNC IN/OUT DVI-D.
10 12 DC IN 12V terminal Accepts a DC power input (12V). 13 REMO TE terminal T o connect to a RS-232C device f or remote control function. 14 SYNC IN/OUT terminal Used when the camera output signal is synchronized to an e xter nal signal or when a synchronized signal is output.
11 5. 2 Cautions on Connection • When connecting the camera cables, be sure to turn off the camera control unit and any other equipment connected to it. • For DC pow er supply connecting to DC IN 12V terminal, use class II DC power supply approv ed according to EN60950-1 in Europe.
12 6. OPERA TION A camera head needs to be connected to this camera control unit from this section on. 1 Refer to the item “5. CONNECTION”, connect the equipment correctly .
13 1 A WB (Automatic white balance) • Set the MODE to A WB on the WHT BAL menu. Change the C.TEMP (color temper ature conv ersion) setting, if necessar y . (Refer to the item “7.2 (3) WHT BAL (White Balance)”.) 3200K : Appropr iate for indoor shooting.
14 6. 4 Gain When the image is dark ev en if the lens iris is open, change the gain (video gain) to get the desired video lev el. For gain adjustment of the unit, A UT O (Automatic gain control), MANU AL (Manual gain control), OFF (0 dB) modes are provided.
15 6. 5 Shading Correction Due to the lens used or the environmental condition, color shading ma y occur at the upper and lower edge of the screen. If this happens, the shading correction function can be used to decrease the amount of color shading.
16 7. MODE SETTING BY ON SCREEN DISPLA Y V arious settings can be controlled on the unit by using the on screen menu display ed on the monitor. The contents once set are memorized in the scene fi les (A, B, C , D , E) selected, so if the power turns off, it is unnecessary to set again when using the unit next time .
17 7. 2 Menus • Select the menu to change the setting by ref erring to the item “7.1 Using the Menus”. • When the [MENU UP], [MENU DOWN] b uttons are pushed, the “ ” on the screen mov es up and down. Mov e the “ ” to the item whose setting you wish to change .
18 (1. 1) Changing the setting in A UTO mode Shutter mode AUTO, MANUAL, SS Video level adjustment -100 to 100 Exposure metering PEAK/AVE, MEDIAN Peak and average ratio adjustment 00 10 to 10 00 -- 1 S.
19 (e) Changing the automatic shutter response speed 1 Mov e the “ ” to AREA by pushing the [MENU UP], [MENU DO WN] buttons. 2 Select the measurement light area by pushing the [D A T A UP], [DA T A DOWN] b uttons.
20 (1. 2) Changing the setting in MANU AL mode Shutter mode AUTO, M ANUAL, SS -- 1 SHUTTER -- (FILE A) Shutter speed setting MODE MANUAL OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, MANUAL OFF 1/2000.
21 ( 2 ) GAIN (Video gain) GAIN has three modes; AUT O, MANU AL, OFF . Mov e the “ ” to MODE, push the [D A T A UP], [DA T A DOWN], and select one of the three modes: AUT O, MANU AL, OFF .
22 1 Mov e the “ ” to MANU AL by pushing the [MENU UP], [MENU DO WN] buttons. 2 Select the desired value of manual gain b y pushing the [DA T A UP], [DA T A DOWN] buttons . [D A T A UP] -15dB 20dB [D A T A DOWN] ( 3 ) WHT BAL (White balance) The WHT BAL has two modes; AWB , MANUAL.
23 The availab le picture area is shown by the shading correction on the screen that is divided into 64 parts. PRESET A PRESET B PRESET D PRESET C PRESET E USER Custom Selection (e) Confi rming the contents of the zone area selected by A WB 1 Mov e the “ ” to AREA DISP by pushing the [MENU UP], [MENU DO WN] buttons.
24 ( 4 ) PROCESS1 Gamma correct ion ON, OFF Gamma correction level setting -10 to 10 -- 4 PROCESS1 -- (FILE A) GAMMA ON/OFF ON GAMMA 0 Black gamma correction setting LOW, NORMAL, HIGH BLACK GAMMA NORM.
25 (4. 3) Changing black gamma correction le vel 1 Mov e the “ ” to BLACK GAMMA b y pushing the [MENU UP], [MENU DOWN] buttons . 2 Select blac k gamma correction by pushing the [D A T A UP], [DA T A DOWN] b uttons.
26 (4. 6) Changing pedestal (a) Changing master pedestal 1 Mov e the “ ” to M. PED by pushing the [MENU UP], [MENU DOWN] b uttons. 2 Select the desired value of the master pedestal b y pushing the [DA T A UP], [DA T A DOWN] buttons . [D A T A UP] M.
27 ( 5 ) PROCESS2 Detail gain setting 0 to 31 -- 5 PROCESS2 -- (FILE A) DTL GAIN 10 DTL FREQ 10 HV BALANCE 16/16 DNR OFF Detail boost frequency 1 to 1 6 Ratio of vertical detail quantity to horizontal one 8/16 to 24/16 Digital noise reduction ON, OFF Move up and down by pushing MENU UP, DOWN Select the desired value by pushing DATA UP, DOWN (5.
28 ( 6 ) PROCESS3 Matrix color correction ON, OFF -- 6 PROCESS3 -- (FILE A) COLOR R MATRIX ON HUE 0 GAIN 0 CHROMA 0 Selection of correction color R, R-Ye, Ye, Ye-G, G, G-Cy, C, Cy-, B, B-Mg, Mg, Mg-R .
29 ( 7 ) SYNC When an external sync signal is input, the display changes from INT (internal sync) to EXT . (e xter nal sync) automatically . INT EXT (7.
30 ( 8 ) OPTION1 SHADING MODE OFF, SET, MANUAL -- 8 OPTION1 -- (FILE A) DTL OUT OFF SHADING OFF FLIP OFF MIRROR OFF STATUS DISP BINNING DVI MONITOR I/P MODE BAUD RATE OFF OFF PC 1080p 9600bps Detail s.
31 (8. 4) Changing OSD (On Screen Display) output 1 Mov e the “ ” to OSD OUTPUT by pushing the [MENU UP], [MENU DO WN] buttons. 2 Select ALL ON or D VI or SDI by pushing the [D A T A UP], [DA T A DOWN] buttons .
32 (8. 9) Change of DVI monitor receiver types 1 Mov e the “ ” to D VI MONITOR b y pushing the [MENU UP], [MENU DOWN] buttons . 2 Select PC or TV by pushing the [D A T A UP]-[DA T A DOWN] buttons • PC: f or use of PC monitor • TV: f or use of monitor TV (8.
33 ( 9 ) OPTION 2 s R filter mode: ON, OFF s R shutter speed setting: OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/3000s, 1/4000s, 1/5000s, 1/10000s s R filter gain setting: -15dB to 30dB .
34 (9. 5) Changing the R fi lter DNR (digital noise reduction) 1 Mov e the “ ” to R FL T DNR by pushing the [MENU UP], [MENU DO WN] buttons . 2 Set to ON or OFF by pushing the [D A T A UP], [DA T A DOWN] b uttons. *If OFF is selected for R FL T MODE, the R FL T DNR display disappears, so it cannot be changed.
35 ( 10 ) Setting USER area • When USER is selected for the AREA of the automatic shutter or f or AWB , the light measurement zones can be changed. • The USER area is composed of 64 zones with 8 (vertical) x 8 (hor izontal) areas , and each area can be set to ON/ OFF .
36 ( 11 ) Returning to factory settings The contents set of each scene fi le can be returned to the factory default status (preset status). (1) Select a scene fi le to set to the f actor y default status b y pressing the [FILE] button.
37 8. BEFORE MAKING SER VICE CALL Symptom Items to be checked No image • Is power supplied correctly? • Is the power s witch on, and the power LED illuminated? • Is the lens iris adjusted correc.
38 9. SPECIFICA TIONS * These conditions are only satisfi ed when the camera control unit is connected to camera head model # IK-HD5H. P ower supply DC 12 V ± 10 % P ower consumption Approx. 10.3W (including the camera head) (with the power supply voltage of 12V) Pickup system RGB, 3CMOS , Micro prism system Image sensor 1/2.
39 10. EXTERNAL APPEARANCE DIA GRAM Unit : mm [inch] 12.5 [0.4 9 ] 186 [7.32] 110 [4.33] 27 [1.06] 13 9 ± 0.15 [5.472 ± 0.006] 62 ± 0.1 [2.44 ± 0.004] 4-M3 BD [F ront] [Rear] 40 [1.
Limited Warranty – T OSHIBA Camera Control Unit The Imaging Systems Division of Toshiba America Information Systems, Inc. ("ISD") makes the following limited warranty with regard to this Camera Control Unit ("Product"). These limited warr anties apply to th e Or i gi na l End-User "You(r)".
Een belangrijk punt na aankoop van elk apparaat Toshiba ik-hd5e (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba ik-hd5e heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba ik-hd5e vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba ik-hd5e leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba ik-hd5e krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba ik-hd5e bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba ik-hd5e kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba ik-hd5e . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
