Gebruiksaanwijzing /service van het product M100 van de fabrikant Toshiba
Ga naar pagina of 200
Satellite M100 TOSHIBA Satellite M100 Series User's Manual.
ii Satellite M100 Copyright © 2006 by TOSHIBA Corporation. All rights reserved. Under copyrigh t law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liabili ty is assumed, with respect to the use of the inform ation contained herein.
Satellite M100 iii Other trademarks and registered trademarks not listed above may be used in this manual. TruSurround XT, WOW HD, Circle Surround Xtract , SRS and symbol are trademarks of SRS Labs, Inc.
iv Satellite M100 ■ Before you connect the comp uter to a power source, ensure that the voltage rating of the AC adapter match es that of the available power source. 115 V/60Hz in most of North and South America and some Far Eastern countries such as Taiwan.
Satellite M100 v ■ Do not use this product near water, for example, near a bathtub, washin g bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. ■ Avoid using a tele phone (other tha n a cordless type ) during an el ectrical storm.
vi Satellite M100 FCC information Model Name: Satellite M100 FCC notice "Declaration of Conformity Information" This equipment has been tested and f o und to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Satellite M100 vii EU Declaration of Conformity Canadian Regulatory In formation (Canada Only) This digital apparatus does not excee d the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communi cations.
viii Satellite M100 Optical Disc Drive Safety Instruction The optical dri ve that is use d in th is computer is equipped with a laser device. A classification label with the following sentence is affix ed to the surface of the drive.
Satellite M100 ix International pr ecautions Location of the requir ed label Sample shown below. Location of the label on the drive and manufacturing information may vary. ■ This drive employs a laser system. To en sure proper use of this product, please read this instruction manual carefu lly and retain for future reference.
x Satellite M100 VORSICHT: Dieses Gerät enthä lt ein Laser- System und ist als "LASERSCHUTZKLASSE 1 PRODUKT" klassifizier t. Für den richtigen Gebrauch dieses Modells lesen Sie bitt e die Bedienungsanlei tung sorgfältig durch und bewahren diese bitte als Refere nz auf.
Satellite M100 xi Modem warning notice Conformity Statement The equipment has been approved to [Commission Decisi on "CTR21"] for pan- European single termina l connection to the Public Switched Telephone Network (PSTN).
xii Satellite M100 Redial Up to two re dial a ttempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experie ncing problems with the Black Listed code, set the interval betwee n redials at one minute or longer.
Satellite M100 xiii If problems arise If any of your telephon e equipment is not operating properly, you should immediately remove it from your teleph one line, as i t may cause ha rm to the telephone network. If the telephone company notes a problem, they may temporarily discontinue service.
xiv Satellite M100 Instructions for IC CS-03 certified equipment 1. NOTICE: The Industry Canada label identifies certi fied equipment. This certification means that the equipment meets certain telecom.
Satellite M100 xv Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian te lecoms network must have a valid Austel permit. This modem has been de signed to specifically configure to ensure complian ce with Austel standards when the c ountry/region selec tion is set to Australia.
xvi Satellite M100 Notes for use of this device in New Zealand ■ The grant of a Telepermit for a devi ce in no way indicates Telecom acceptance of responsibi lity for the correct operation of that device under all operating con ditions.
Satellite M100 xvii ■ The preferred method of dialing is to use DTMF tones (ATDT...) as this is faster and more reliable th an pulse (d ecadic) dial ing.
xviii Satellite M100 Important Notice Copyrighted works including, but not limited to mu sic, vide o, comput er program, databases are protected by copyright laws.
Satellite M100 xix PC Card overheating Some PC Cards can become hot with prolonged use. Over heating of a PC Card can result in errors or instability in the PC Card operation. Also be careful when you remove a PC Card that has been used for a long t ime.
xx Satellite M100 W orking envir onment This product was designed to fulfill the EMC (Electromagneti c Compatibility) requirements for "residential, commercia l and light industry environments". The following environment is not approved: ■ Industrial Environments (e.
Satellite M100 xxi W ireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequenc y electromagnetic en ergy. The level of energy emitted by Wireless LAN devices howeve r is far l ess than th e electromagne tic energy em itted by oth er wireless devices such as mobile phon es.
xxii Satellite M100 Usage Restrictions Do not use the Wireless Products for controlling the following equi pment: ■ Equipment directly linked with human life corresponding to the following. ■ Medical equipment such as life su pport systems, equipment used in operations, e tc.
Satellite M100 xxiii Warning Note Turn OFF the Wireless Communication switch of wireless product s in a congested place, such as a crowded c ommuter train. Keep this product away from a cardiac pacemaker at least 22cm. Radio waves can potential ly affect cardiac pace maker operation, there by causing respiratory troubles.
xxiv Satellite M100.
User’s Manual xxv Satellite M100 T able of Contents Preface Manual contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxx Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxi Equipment checklist .
xxvi Satellite M100 Chapter 4 Operating Basics Using the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Using the Fingerprint Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Using the internal modem .
Satellite M100 xxvii Chapter 8 Optional Devices PC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 SD/MMC/MS/MS Pro/xD M emory cards. . . . . . . . . . . . . . . . . . . 8-4 Memory expansion . . . . . .
xxviii Satellite M100.
User’s Manual xxix Satellite M100 Pr eface Congratulations on your purchase of the Satellite M100 computer. This powerful notebook computer provi des excellen t expansion capability, including multimedia devices, a nd it is designed to provide years of reliable, high-performa nce computing.
xxx Satellite M100 Preface Manual contents This manual has ten chapters, three appendixes, a glossary and an index. Chapter 1, Satellite M100 Feat ures , is an overview of the computer 's special features, utilities, and option s. Chapter 2, The Grand Tour , identifies the comp onents of the compute r and briefly explains how they fu nction.
Satellite M100 xxxi Preface Conventions This manual uses the following forma t s to describe, iden tify, and highlight terms and operating procedures. Abbr eviations On first appearance, and whenever ne cessary for clarit y, abbreviations are enclosed in pa rentheses foll owing their def inition.
xxxii Satellite M100 Preface Messages Messages are used in this manual to bring important information to your attention. Each type of message is identif ied as shown below. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
Satellite M100 xxxiii Preface Softwar e Microsoft ® Windows ® XP Home Edi tion / Professional ■ The following software which is preinstalled on your hard disk: ■ Microsoft ® Windows ® XP Home .
xxxiv Satellite M100 Preface Docume ntation ■ Your computer's documentation: ■ Satellite M100 Series Personal Computer User's Manual ■ Microsoft ® Windows ® XP manual package (provid.
User’s Manual 1-1 Satellite M100 Chapter 1 Satellite M100 Featur es This chapter identi fies the compute r's special featu res, options and accessories.
1-2 Satellite M100 Satellite M100 Features Chip Set Memory Intel ® 945PM Express Chipset or Intel ® 945GM Express Chipset Realtek 861 Au dio codec TI PCI7412 for Mult iple Digita l Media Card Slot, IEEE 1394 and PCMCIA controller.
Satellite M100 1-3 Satellite M100 Features BIOS Video RAM Depending on the model you purchased: Up to 128MB integrated solution and shared with main memory for Mobile Intel ® 945GM Express Chipset 12.
1-4 Satellite M100 Satellite M100 Features Power Disclaimer (Battery Life) For more information on th e Discla imer regarding Battery Life, please refer to the Disc laimers sec tion in Cha pter 10. Floppy Disk Drive d evices TouchPad Battery Pack 6-cell Lithium Ion smart battery pa ck with 43.
Satellite M100 1-5 Satellite M100 Features Display Disclaimer (LCD) For more information on the Disclaimer regarding LCD, please refer to the Disclaimers section in Chapter 10.
1-6 Satellite M100 Satellite M100 Features Disclaimer (HDD Drive Capacity) For more information on the Discla imer regarding HDD Drive Capacity, please refer to the Disclaimers sec tion in Chapter 10.
Satellite M100 1-7 Satellite M100 Features Slots (depending on configuration) DVD Super Multi drive with double layer disc recording support Some models are equippe d with a full-size DVD Super Multi drive module with double layer support that lets you record data to rewritable CD/ DVDs as well as run either 12cm (4.
1-8 Satellite M100 Satellite M100 Features Ports (depending on configuration) Multimedi a Communications External mo nitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has 4 Univ ersal Serial Bus (USB) ports that comply with the USB 2.
Satellite M100 1-9 Satellite M100 Features Security Security Lock Sl ot Special featur es The following features are eit her unique to TOSHIB A computers or are advanced features, whic h make the computer more conve nient to use.
1-10 Satellite M100 Satellite M100 Features System Autom atic Standby/Hibernation This feature automaticall y places the system into either Standby Mode or Hibernation Mode when there is no input or hardware access for a specified time period.
Satellite M100 1-11 Satellite M100 Features Utilities This section describes preinstalled ut ilities and tells how to start them. For details on operations, refer to each utility's online manual, help fil es or readme files. Fingerprint Adds an additional layer of security to your files by requiring a valid fingerprint to access them.
1-12 Satellite M100 Satellite M100 Features TOSHIBA ConfigFree ConfigFree is a sui te of utilities to allow easy control of communication devices and network connections. Conf igFree also allows you to find communication problems and create profiles for easy switchin g between loca tion and communication networks.
Satellite M100 1-13 Satellite M100 Features TOSHIBA Hardware Setup This program lets you customize y our hardware settings according to the way you work with your computer and the peripherals you use. To acce ss this utility, click Start, click Control Panel, cli ck Printers and Other Hard ware and select the TOSHIBA HW Setup icon.
1-14 Satellite M100 Satellite M100 Features Options You can add a number of options to make your computer even more powerful and convenie nt to use. The following options are available: Fingerprint utility This product has a fingerprint utility installe d for the purpose of enrolling and recogni zing fingerprints.
Satellite M100 1-15 Satellite M100 Features Battery charger The battery charger lets you charge ex tra batteries outside the computer. USB Floppy Dis k Drive Lets you attach a floppy disk drive to your computer by means of a USB cable.
1-16 Satellite M100 Satellite M100 Features.
Satellite M100User’s Manual 2-1 Satellite M100 Chapter 2 The Grand T our This chapter identifies the various components of your computer. Become familiar with ea ch component before you operate the computer. Front with the display closed The following figure shows the computer front with its display panel in t he closed position.
2-2 Satellite M100 The Grand Tour DC IN LED The DC IN LED indicates the computer is connected t o the AC adapter and it is plugge d into an AC power source.
Satellite M100 2-3 The Grand Tour Right side The following figure shows the computer's right side. The right side of the co mputer 1. U NIVERSAL S ERIAL B US (USB) P ORTS 2. O PTICAL D ISC D RIVE 3. O PTICAL D ISC D RIVE LED 4. S ECURITY L OCK 2 3 1 4 Universal Serial Bus (USB) Ports The Universal Serial Bus (USB 2.
2-4 Satellite M100 The Grand Tour Left side The following figure shows the computer's left side. The left side o f the computer * The availability of this feature is depe ndant on the model you purchased. 1. RGB (M ONITOR ) P ORT 2. F AN V ENTS 3.
Satellite M100 2-5 The Grand Tour Back side The following figure shows the computer ba ck panel. The back side of the computer 1. M ODEM J ACK 2. DC-IN 15V J ACK 3.
2-6 Satellite M100 The Grand Tour Underside The following figure show s the underside of the computer. Make sure the display is closed before tu rning over your computer. The bottom of the co mputer 1. B ATTERY P ACK 2. B ATTERY P ACK L OCK 3. E XPANSION M EMORY S OCKET 4.
Satellite M100 2-7 The Grand Tour Front with the display open The following figure shows the front of the computer with the display open. To open the display, push the latch on th e front of the display an d lift it up. Position the display at a comfortable viewing an gle.
2-8 Satellite M100 The Grand Tour CD/DVD Button Pressing this button when the computer's power is off will run Express Media Player. Once Expr ess Media Player is launched, the power indicator turns on, the a udio control buttons are enable d and pressing this button again will do nothing.
Satellite M100 2-9 The Grand Tour Stop/Eject Bu tton Stops playing the CD, DVD or digital audio. Also ejects a disc from the tray. (The availability of this function depends on the model you purchased.) Previous Button Skips backwards to the prev ious track, chapter or digital file.
2-10 Satellite M100 The Grand Tour Keyboard Indicators Optical Disc drive The computer will eith er have a CD-RW/DVD-ROM drive, DVD-RO M drive or double layer DVD Super Mult i drive depending on its c onfiguration. An ATAPI interface controller is u sed for the opera tion of these optical drive s.
Satellite M100 2-11 The Grand Tour W ritab le discs This section describes the types of writable discs. Che ck the specifications for your drive to for the type of discs it ca n write. Use Record Now! to write compact discs. Ref er to Chapter 4, Operating Basics .
2-12 Satellite M100 The Grand Tour DVD Super Mult i drive with double laye r disc r ecord ing support The full-size DVD super multi drive module lets you record da ta to rewritable discs as well as run either 12cm (4.72") or 8cm (3.1 5") discs without using an adapter.
Satellite M100 2-13 The Grand Tour AC adapter The AC adapter converts AC power to DC powe r and reduces the vol tage supplied to the comp uter. It can a utoma tically adjust to any voltage from 100 to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use the computer in almost any country/region.
2-14 Satellite M100 The Grand Tour.
User’s Manual 3-1 Satellite M100 Chapter 3 Getting Started This chapter provides basic informati on to get you started using your computer. It cove rs the following topi cs: ■ Setting up your work.
3-2 Satellite M100 Getting Started General conditions In general, if you are comfortable, so is you r computer, but read the followi ng to make sure your work site provides a proper environment. ■ Make sure there is adequate spac e aroun d the computer for proper ventilation.
Satellite M100 3-3 Getting Started Seating and postur e The height of your chair i n relation to the computer a nd keyboard as well as the support it gives your body are prim ary factors in reducing work strain. Posture and positioning of the computer ■ Place your chair so tha t the keyboard is at or slightly below the le vel of your elbow.
3-4 Satellite M100 Getting Started W ork habits A key to avoiding discomfort or injury fr om repetitive strain is to vary your activities. If possible, schedule a vari ety of tasks into your work day. If you must spend long periods at the computer, finding ways to break up the routi ne can reduce stress and i mprove your ef ficiency.
Satellite M100 3-5 Getting Started Connecting the AC adapter Attach the AC adapter when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged b efore you can ope rate from battery power.
3-6 Satellite M100 Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the front of the computer. Opening the display 2. Lift the panel u p and adjust it to the best viewing angl e for you.
Satellite M100 3-7 Getting Started Turning on the power Starting up for the first time When you first turn on the power, th e computer's initial screen is the Windows ® XP Startup Screen Logo. Follo w the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
3-8 Satellite M100 Getting Started 3. Click Start and click Shut Down . From the Shut Down window click Turn Off . 4. Turn off the power to any peripheral devices. Hibernation mode The hibernation feature save s the content s of memory to the hard disk when the computer is tu rned off.
Satellite M100 3-9 Getting Started Starting Hibernation To enter Hibernation mode, follow th e steps below. 1. Click Start . 2. Select Shut Down . 3. Open the Shut Down dialog box. If Hibernate is not displayed go to step 4. If Hibernate is displayed go to step 5.
3-10 Satellite M100 Getting Started Standby mode In standby mode the power remains on , but the CPU and all other devices are in sleep mode . Standby precautions ■ Before entering Standby mode, be sure to save your data.
Satellite M100 3-11 Getting Started Enabling Standby You can enter standby mode in one of three ways: 1. Click Start , then Shut Down and then Stand by . 2. Close the display pa nel. This feature must be enabled. Refer to the Setup Action tab in TOSHIBA Power Saver Utility described in the Control Panel.
3-12 Satellite M100 Getting Started Cr eating an Expr ess Medi a Player Recovery CD* A recovery image of Express M edia Player is stored on the hard disk. You may use this image to create Recovery CD disc using the following steps: 1. Select blank CD.
User’s Manual 4-1 Satellite M100 Chapter 4 Operating Basics This chapter gives informa tion on basic operatio ns including using the TouchPad, optical disc drives, the internal modem, L AN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal.
4-2 Satellite M100 Operating B asics P r e s s t h e l e f t b u t t o n t o s e l e c t a m e n u i t e m o r t o m a n i p u l a t e t e x t o r g r a p h i c s designated by the pointer. Press the ri ght button to display a menu or other function depending on th e software you are using.
Satellite M100 4-3 Operating Basi cs Points to note about the Fingerprint Sensor Failure to follow these guidelines might result in (1) damage to the sensor or cause sensor failure, (2 ) finger recognition problems , or lowe r finger recognition success rate.
4-4 Satellite M100 Operating B asics Fingerprint Sensor Limitations. ■ The fingerprin t sensor compares and analyzes th e unique ch aracteristics in a fingerprint. ■ A warning message will be disp laye d when recognition is abnormal or recognition is not succ essful within a fixed duration.
Satellite M100 4-5 Operating Basi cs Set Up Procedur e Please use the following procedur e when first using fin gerprint authentication. Fingerprint Registration Enroll the required authentication data using the User Enrollment Wizard . 1. Click Start , Point to All Programs , point to protector Suite QL and click User Enrollment Wizard .
4-6 Satellite M100 Operating B asics 7. The User’s Fingers screen i s displayed. Based on the illustration, select the finger to be recognized, an d then click Next . Previously enrolled fingerprints would have green check marks. The fingerprint bein g enrolled now would have a red che ck mark.
Satellite M100 4-7 Operating Basi cs Fingerprint System Boot Authentication General The fingerprint authentication syst em can be used to replace the keyboardbased User/BIOS Password au thentication system when booting up.
4-8 Satellite M100 Operating B asics Fingerprint Single Sign On Feature General This is a feature th at allows the use r to complete the authentication for both the User/BIOS Password (and optionally, the Hard Disk Drive and Supervisor sub-passwords) and logging on to Windows using only one fingerprint authentication when booting up.
Satellite M100 4-9 Operating Basi cs How the Swipe the Finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication fail ures: 1. Align the first joint of the finger to th e center of the sensor.
4-10 Satellite M100 Operating B asics Using the internal modem This section describes how to setup the modem and use it to connect to other computer systems. Refer to the co mputer's online help files and the online help files for your mode m software, for more information.
Satellite M100 4-11 Operating Basi cs 3. Click the icon with the primary mouse button to display a list of regions that the modem supports. A sub menu for telephony location information will also be displayed. A ch eck will appear next to t he currently selected region and tele phony location.
4-12 Satellite M100 Operating B asics Modem Selection If the computer cannot recognize th e internal modem, a dialog box is displayed. Select the COM port for your modem to use. Dialing Pr operties Select this item to display the dialing properties. Connecting To connect the internal modem cable, follow the ste ps below.
Satellite M100 4-13 Operating Basi cs Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pu ll out the connector. 2. Disconnect the cable from the computer in the same manne r.
4-14 Satellite M100 Operating B asics 3. Plug the other end of the cable into a LAN hub connec tor. Check with your LAN administrator before connecting to a hub. Disconnecting the LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connect or in the computer's LAN jack and pull out the connector.
Satellite M100 4-15 Operating Basi cs Worldwide operation The Bluetooth radio transmitter and receiver ope rate in the 2.4 GHz ban d, which is license-fre e and compatible with radio systems in most countries in the world. Radio links You can easily establish links betw een two or more devices.
4-16 Satellite M100 Operating B asics Product Support: The latest information regarding Op erating System support, Language Support or available upgrades can be found on our web site http:// www.toshiba-europe.com/computers/t nt/bluetooth.htm in Europe or www.
Satellite M100 4-17 Operating Basi cs Loading optical disc media To load a disc, follow the steps below. 1. Turn on the power. 2. a. Pre ss the eject button to open the draw er slightly. Pressing the eject button b. Pressing the eject bu tton will not open the drawer when the computer's powe r is off.
4-18 Satellite M100 Operating B asics 3. Grasp the drawer gently and pull until it is fully open. Pulling the drawer open 4. Lay the disc, label si de up, in the drawe r. Inserting a disc 5. Press gently at th e center of the di sc until you f eel it click into place.
Satellite M100 4-19 Operating Basi cs Closing the drive dra wer Removing compact discs To remove the disc, follow the steps below. 1. To pop the drawer partially open, press the eject button . Gently pull the drawer out until it is fully opened. 2. The disc extends slightly over the sides of the drawer so you can grasp it.
4-20 Satellite M100 Operating B asics Buttons The Internet button and the CD/DVD button can be assigned fu nctions and applications in the TOSHIBA Controls Properties.
Satellite M100 4-21 Operating Basi cs Express Media Player Express Media Player is a quick pl ay feature that enable s users to perform DVD and CD playback wi thout loading Windows. Notes for Express Media Player Express Media Player (CD) and Ex press Media Player (DVD) Usage ■ Dirty or scratched CD/DVDs might not be playable.
4-22 Satellite M100 Operating B asics Express Media Player Settings There are a few s ettings that need to be made in order to use the Express Media Player functions for the first time.
Satellite M100 4-23 Operating Basi cs Table 2 Keyboard Code Functions via the Front operation pa nel and the keyboard in the Express Media Player mode This list shows how the functions av ailable from the keyboard correspond to those available from the Front operation panel.
4-24 Satellite M100 Operating B asics - 7 - Select track 7 Select chapter 7 - 8 - Select track 8 Select chapter 8 - 9 - Select track 9 Select chapter 9 -0 -N o r m a l l y functions as “0” Normall.
Satellite M100 4-25 Operating Basi cs * SRS function is disable as a defaul t.To enable it, follow these steps. 1. Press “F2” key to show menu. (“Display Setting” of left menu is highlighted.) 2. Move the cu rsor with down arrow key and Select “A udio Settings” of left menu.
4-26 Satellite M100 Operating B asics Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW disc that m ay be caused by writing or rewriting with this product.
Satellite M100 4-27 Operating Basi cs ■ Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than Sonic RecordNow! has not been confirmed.
4-28 Satellite M100 Operating B asics Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/ -RW/+R/+RW /-RAM disc that may be caused by writing or rewriting with this product.
Satellite M100 4-29 Operating Basi cs ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check th e disc for dirt or damage before you use it. ■ The actual number of rew rites to CD-RW or DVD-RW/ +RW/-RAM is affected by the qu ality of the di sc and the way i t is used.
4-30 Satellite M100 Operating B asics ■ When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. ■ Be sure to connect the universal AC adapter before you write or re write. ■ Before you enter standby/hibernation mode, be sure to finish DVD-RAM writing.
Satellite M100 4-31 Operating Basi cs When Using W inDVD Creator 2 Platinum How to make a DVD-Video Simplified steps for making a DVD-Vide o from video data captured from a DV-Camcorder: 1. Click Start -> All Programs -> InterVideo WinDVD Creator2 -> InterVideo WinDVD Creator to launch WinDVD Creator.
4-32 Satellite M100 Operating B asics ■ When recording to a DV- Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data. ■ CD recorder, JPEG functions, DVD-Audio, mi ni DVD and Video CD functions are not supported in this version.
Satellite M100 4-33 Operating Basi cs 4. About recorded DVDs ■ Some DVD-ROM drives for personal computers or other DVD players may not be able to read DVD-R/+R/-RW/+ RW/-RAM discs. ■ When playing your recorded disc on your computer, please use the WinDVD software application.
4-34 Satellite M100 Operating B asics Data V erification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data dis c. 1. Click the Options button ( ) on the RecordNow! Console to open the Options panels.
Satellite M100 4-35 Operating Basi cs Media Car e This section provides tips on protecting data stored on your discs and disks. Handle your media with care. The f ollowing simple precautions will i ncrease the lifetime of your media and protect the data stored on it: 1.
4-36 Satellite M100 Operating B asics TV -Out Use the TV-Out port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix B . Setting up more than one display You can set up your computer to utili ze more than one display, effectively spreading a single desktop screen across two monitors.
Satellite M100 4-37 Operating Basi cs Cleaning the computer To help ensure long, troubl e-free operatio n, keep the computer free of dust and use care with liquids arou nd the compute r.
4-38 Satellite M100 Operating B asics.
User’s Manual 5-1 Satellite M100 Chapter 5 The Keyboar d The computer's keyboar d layouts ar e compatible with a 101/102-key enhanced keyboard. By pre ssing some keys in combination, all the 101/ 102-key keyboard functions can be execute d on the computer.
5-2 Satellite M100 The Keyboard F1 ... F12 function keys The function keys, not to be confused wit h Fn, are the 12 keys at the top of your keyboard. Thes e keys are d ark gray, but fun ction differently from the other dark gray keys. F1 through F12 are called function keys because they ex ecute programmed functions when pressed.
Satellite M100 5-3 The Keyboard Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key. Hotkeys Fn + ESC Volume Mute Turns the volume on and off. Fn + F1 Instant Security Enters screen saver mode and blanks the scre en. To rest ore your desktop, press any key or use the TouchPad.
5-4 Satellite M100 The Keyboard W indows special keys The keyboard provides two keys that ha ve special function s in Windows XP. One activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows XP Start menu This key has the same function as the secondary mouse button.
Satellite M100 5-5 The Keyboard T u rning on the overlays The numeric keypad overlay can be used for numeric data input or cursor and page control. Arrow mode To turn on the Arrow mode, press Fn + F10 ( Arr ow mode indicator lights). Now try cursor and page control us ing the keys shown in the disagram below.
5-6 Satellite M100 The Keyboard T emporarily using normal keyboard (overlay on) While using the overlay, you ca n temporarily access the nor mal keyboard without turning off the overlay: 1. Hold down Fn and press any other key. All keys will operate as if the overlay were off.
User’s Manual 6-1 Satellite M100 Chapter 6 Power and Power -Up Modes The computer's power resourc es include the AC adapter and intern al batteries. This chapter gives details on making the most ef fective use of these resources i ncluding cha rging and chan ging batteries, ti ps for saving battery power, and power up modes.
6-2 Satellite M100 Power and Power-Up Modes AC adapter not connected Battery capacity is above low battery trigger point • Operates • LED: Battery off DC IN off Battery capacity is below low batte.
Satellite M100 6-3 Power and Power-Up Modes Power indicators As shown in the above table, the Battery , DC IN and Power indicators alert you to the computer's operating ca pability and battery charge statu s Battery indi cator Check the Battery indicator to determine the status of the battery.
6-4 Satellite M100 Power and Power-Up Modes Battery types The computer has two types of batteries: ■ Battery pack ■ Real Time Clock (RTC) battery Battery pack When the AC adapter is not connec ted, the computer's main power source is a removable lithium ion battery pack , also referred to in this manual as the battery.
Satellite M100 6-5 Power and Power-Up Modes When this error appears, th e fo llowing action is recommended. 1. Connect the AC adapter and let the battery charge for 24-hou rs. 2. Press F2 to enter BIOS setup menu. 3. Set correct time and date. Care and use of the battery pack The battery pack is a vital component of portable computing.
6-6 Satellite M100 Power and Power-Up Modes 6. Use only the battery pack supplied with th e computer or other device or an battery pack approved by the computer or device's manufacturer. Battery packs have differe nt voltages and termin al polarities.
Satellite M100 6-7 Power and Power-Up Modes 5. Charge the b attery pack only in an ambi ent temperature b etween 5 and 30 degrees Celsius. Otherwis e, the electrolyte solution might le ak, battery pack performance might deteriorate and the battery li fe might be shortened.
6-8 Satellite M100 Power and Power-Up Modes Time The followin g table shows the time required to f ully charge a disc harged battery. Charging time (hours) Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extrem ely hot or cold.
Satellite M100 6-9 Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monito red by the TOSHIBA Power Saver. Refer to Uti lities in Chapter 1, Satellite M100 Features . Maximizing battery operating time A battery's usefulness depends on how long it can supply power on a single charge.
6-10 Satellite M100 Power and Power-Up Modes Retaining data with power off (standby mode) When you turn off your computer with fully cha rged batteries, the batteries retain data/charge for the follo .
Satellite M100 6-11 Power and Power-Up Modes 6. Unlock the Battery Pack Lock. Removing the battery pac k-1 7. Slide the battery pack latch to the left, then pull the battery out of the battery bay.
6-12 Satellite M100 Power and Power-Up Modes Installing the battery pack To install a battery pack, follow the steps below. 1. Turn the computer's power off. 2. Disconnect all cables connec ted to the computer. 3. Hold the battery pack so that the label face s down and the connec tors on the battery face the con nectors on the computer.
Satellite M100 6-13 Power and Power-Up Modes TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor.
6-14 Satellite M100 Power and Power-Up Modes To enter a password manually, fol low these steps: 1. Turn on the power as descr ibed in Chapter 3, Getting Started . The following message will appear in the LCD: Enter Password [xxxxxxxx] 2. Enter the Password.
User’s Manual 7-1 Satellite M100 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup le ts you configure settings for various hardware devices through a number of tabs titl ed General, Password, Display, CPU, Boot Priority, Keyboard, LAN, and U SB.
7-2 Satellite M100 HW Setup General This window displays the BIOS version and contains two buttons: Setup This field displays BIOS Version and d ate. Password This tab allows you to set or reset the user password for power on.
Satellite M100 7-3 HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. You can overrid e the settings and m anually select a boot device by pressing one of the following keys whil e the computer is booting: To select the boot drive you want, follow the steps below .
7-4 Satellite M100 HW Setup LAN Wake-up on LAN This feature l ets the computer 's power be tu rned on when it receives a wake- up signal from the LAN. Built-in LAN This feature enables or disables the Built-in LAN. Enabl ed Enables Wake-up on LAN.
User’s Manual 8-1 Satellite M100 Chapter 8 Optional Devices Optional devices ca n expand the comput er's capabilities and its versatility. This chapter describes connect ion or installation of .
8-2 Satellite M100 Optional Devices PC Card The computer is equipped with a PC Card expa nsion slot that can accommodate one 5 mm Type II card. Any PC Card that meets industry standards (manufactured by TOSHIBA or other vendor) can be in stalled.
Satellite M100 8-3 Optional Dev ices Removing a PC card 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Click the PC Card you want to remove. 3. Press the eject button of the PC Card to extend it. 4. Press the extended eject button to pop the card out slightly.
8-4 Satellite M100 Optional Devices SD/MMC/MS/MS Pro/xD Memory car ds The computer is equipped with a multipl e digital media card slot that can accommodate SD/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, wh ich use flash-memory .
Satellite M100 8-5 Optional Dev ices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Be sure the memory card is oriented properly before you insert it. If Windows ® fails to read the card, remove it then r einsert it.
8-6 Satellite M100 Optional Devices Removing a memory car d To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar.
Satellite M100 8-7 Optional Dev ices Memory car d care 1. Do not write to a me mory card if the battery pow er is low. Low po wer could affec t writing accuracy. 2. Do not remove a memory card while read/write is in progress. 3. The memory card is designed so that it can be inserted only one way.
8-8 Satellite M100 Optional Devices Installing a memory module Follow these steps to install a memory module: 1. Set the computer to boot mode and turn off the power. a. The computer is turned on. b. The computer was shut down using the Stand by mode.
Satellite M100 8-9 Optional Dev ices Instal ling a mo dule 8. Seat the cove r and secure it wi th the screw. 9. Replace the battery pack as described in Chapter 6, Power and Power- Up Modes . 10. Turn the power on and make sure the added memory is recognized.
8-10 Satellite M100 Optional Devices Removing the memo ry module 6. Seat the cover and secure its screw. 7. Replace the battery. Additional batt ery pack You can increase the portability of the computer wit h additional battery packs.
Satellite M100 8-11 Optional Dev ices External monitor An external analog monitor can be connec ted to the external monitor port on the computer. To connect a monitor, follow the steps below. 1. Turn the computer off. 2. Connect the monitor to th e external m onitor port.
8-12 Satellite M100 Optional Devices For Intel 1. Click Start > Control Panel > Appearance and Themes . 2. Choose Display to open the Display Properties dialog box. 3. Click the Settings tab. 4. Click the Advanced button. The Intel Plug and Play Monitor dialogue box opens.
Satellite M100 8-13 Optional Dev ices 5. Click the Graphics Properties button. 6. In the subsequent dialogue box , click Display Devices and then set up your television an d notebook displays.
8-14 Satellite M100 Optional Devices For A TI 1. Click Start > Control Panel > Appearance and Themes . 2. Choose Display to open the Display Properties dialog box.
Satellite M100 8-15 Optional Dev ices 4. Click the ATI Catalyst Control Center button. 5. Setup your television and notebook display s. i.LINK (IEEE1394) i.
8-16 Satellite M100 Optional Devices Connecting 1. Make sure the conne ctors are properly al igned and plug the i.LINK (IEEE1394) cable into the computer . 2. Plug the other e nd of the cable into the devic e. Note the followin g when you use i.LINK: ■ You may need to in stall driv ers for your i.
User’s Manual 9-1 Satellite M100 Chapter 9 T r oubleshooting TOSHIBA designed the computer for du rability. However, shou ld problems occur, following th e procedures i n this chapte r can help to determine the cause. All readers should become familiar with t his chapter.
9-2 Satellite M100 Troubleshooting Preliminary c hecklist Consider the simplest solution first. The items in this che cklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripher al devices before you turn on the computer.
Satellite M100 9 - 3 Troubleshooting Hard war e and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the follow ing areas: Software The problems may be caused by your software.
9-4 Satellite M100 Troubleshooting System start-up When the computer does not start properly, check the following items: ■ Self Test ■ Power Sources ■ Power-on Password Self test When the computer starts up, the self test will be run automati cally, and the following will be displayed: This message remains on th e screen for a fe w seconds.
Satellite M100 9 - 5 Troubleshooting Power When the computer is not pl ugged into an AC ou tlet, the battery pack is t he primary power source. However, your computer has a number of other power resources, including an in tellig ent power supply and Real Time Clock battery.
9-6 Satellite M100 Troubleshooting Battery If you suspect a problem wi th the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 6, Power and Power-Up Modes . Keyboard Keyboard problems can be caused by your setup configuration.
Satellite M100 9 - 7 Troubleshooting LCD panel Hard disk drive Problem Procedure Some letter keys produce numbers. Check that the numeric keypad overlay is not selected. Pres s Fn + F10 and try typing again. Output to screen is garbled. Make sure the software you are using is not remapping the keyboard.
9-8 Satellite M100 Troubleshooting Password i.LINK (IEEE1394) Wir eless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics . PC Card Refer also to Chapter 8, Opti onal Devices .
Satellite M100 9 - 9 Troubleshooting Monitor Refer also to Chapter 8, Opti onal Devices , an d to your monitor’s documentation. Sound system Problem Procedure Monitor does not turn on Make sure that the external monitor's power switch is on. C onfirm that the external monitor's power cable is plugged into a working power outlet.
9-10 Satellite M100 Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB se ction in this ch apter and to your mou se documen tation. TouchPad USB mouse Problem Procedure On-screen pointer does not respond to Pad operation The system might be busy.
Satellite M100 9 - 1 1 Troubleshooting USB Refer also to your USB device’s documentation. TV output signal The mouse pointer moves too fast or too slow Try changing the s peed setting in the mouse control utility. 1. Open the Control Panel , select the Mouse icon and press Enter .
9-12 Satellite M100 Troubleshooting LAN Standby/Hibernation Memory expansion Refer also to Chapter 8, Opti onal Devices , for inf ormation on install ing memory modules. Problem Procedure Cannot access LAN or the Wake up on LAN feature does no t work Check for a firm cable connection betwee n the LAN hub.
Satellite M100 9 - 1 3 Troubleshooting Modem Problem Procedure Communication software can't initialize the modem Make sure the comput er's internal modem settings are correct. R efer to Phone and M odem Options Properties in the Control Panel.
9-14 Satellite M100 Troubleshooting CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Opera ting Basics . Problem Procedure You cannot access a disc in the drive M ake sure the driv e's drawer is securel y closed. Press gently until it clicks into place.
Satellite M100 9 - 1 5 Troubleshooting DVD-ROM d rive For more information, refer to Chapter 4, Opera ting Basics . Problem Procedure Cannot write correctly If you have trouble writing, make su re you are observing the following precautions: ■ Use only med ia recommended b y TOSHIBA.
9-16 Satellite M100 Troubleshooting DVD Super Mult i drive with double laye r disc r ecord ing support For more information, refer to Chapter 4, Opera ting Basics . Problem Procedure Some discs run correctly, but others do not The software or hardware configuration may be causing a problem.
Satellite M100 9 - 1 7 Troubleshooting Disk drive For information on disk ca re refer to Chapter 4, Operating Basics . Problem Procedure Some discs run correctly, but others do not The software or hardware configuration may be causing a problem. Mak e sure the hardware configuration matches your software's needs.
9-18 Satellite M100 Troubleshooting Real Time Clock Fingerprint Sensor Problem Procedure The following message is displayed on the LCD: RTC battery is low or CMOS checksu m is inconsiste nt.
Satellite M100 9 - 1 9 Troubleshooting TOSHIBA support If you require any addition al help using your compute r or if you are having problems operating the computer, you ma y need to contact TO SHIBA for additional technic al assistance.
9-20 Satellite M100 Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at th e near est location lis ted below: Outside of Euro pe In Europe Australia TOSHIBA (Australia) Pty, Ltd.
User’s Manual 10-1 Satellite M100 Chapter 10 Disclaimers This chapter states the Disclaimer(s) information applic able to TOSHIBA computers. CPU Central Processing Unit (“CP U”) Performanc e Disclaimer.
10-2 Satellite M100 Disclaim ers Memory (Main System) Part of the main system memory may be used by the graphics system for graphics performance an d therefore reduce the amount of main system memory available for other computing ac tivities.
Satellite M100 10-3 Disclaim ers Graphics Processor Unit (“GPU”) Graphics processor unit ("GPU") pe rformance may vary depending on product model, design configuration, applications, power management settings and feat ures utilized.
10-4 Satellite M100 Disclaim ers.
User’s Manual A-1 Satellite M100 Appendix A Specifications This appendix summarizes the computer's technica l specifications. Dimensions 343mm x 242mm x 38mm 242mm 29.
A-2 Satellite M100 Specifications We i g h t Starting at 2.36kg/5.20lbs* * Weight may vary dependin g on product conf iguration, vendor components, manufacturing vari ability and options selected.
Satellite M100 A-3 Specifications Built-in Modem Network control unit (NCU) Type of NCU AA Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 comm.
A-4 Satellite M100 Specifications.
User’s Manual B-1 Satellite M100 Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor.
B-2 Satellite M100 Display Modes Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your compute r's LCD an d on an external TV or CRT monitor. To connect a tele vision, follow the steps below.
Satellite M100 B-3 Display Modes 4. Click the Advanced button. The Intel Plug and Play Monitor dialogue box opens. 5. Click the Graphics Properties button.
B-4 Satellite M100 Display Modes 6. In the subsequent dialogue box , click Display Devices and then set up your television an d notebook displays..
Satellite M100 B-5 Display Modes For A TI 1. Click Start > Control Panel > Appearance and Themes . 2. Choose Display to open the Display Properties dialog box. 3. Click the Settings tab. 4. Click the ATI Catalyst Control Center button. 5. Setup your television and notebook display s.
B-6 Satellite M100 Display Modes.
User’s Manual C-1 Satellite M100 Appendix C AC Power Cor d and Connectors The power cord's AC inpu t plug must be compat ible with the various international AC power outlets and th e cord must meet the standards for the country/region in which it is used.
C-2 Satellite M100 AC Power Cord and Connectors In Europe, two conductor s power cord must be VDE type , H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F.
User’s Manual D-1 Satellite M100 Appendix D Expr ess Media Player Supported Languages Enter one of the following code s to switch the Express Media Pla yer's language setti ngs for Audio l anguage, Sub title l anguage and disc menu language at DVD Set up menu.
D-2 Satellite M100 Express Media Player Supported Languages KA Georgian OC Occitan; Provencal SV Swedish KK Kazakh OM Or omo; Afan Oromo; Galla SW Swahili; Kiswahili KL Greenlandic; Kalaallisut OR Ori.
User’s Manual Glossary-1 Satellite M100 Glossary The terms in this glossary cover to pics related to this manu al. Alternate na ming is include d for refer ence.
Glossary-2 Satellite M100 Glossary SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic St andards Association VGA: video graphics array WXGA: wide extended graphics array A adaptor: A device that pr ovides an interf ace between two dissimilar electronic devices.
Satellite M100 Glossary-3 Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or ha rd disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB.
Glossary-4 Satellite M100 Glossary D DC: Direct Current. Elect ric current that fl ows in one direction. This type of power is usually supplied by batteries. default: The parameter value aut omatically selected by th e system when you or the program do not provide instructio ns.
Satellite M100 Glossary-5 Glossary G gigabyte ( GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictur es, or other images, such a s charts or graphs, to present informati on. H hard disk: A non-removable disk usually re ferred t o as drive C.
Glossary-6 Satellite M100 Glossary Liquid Crysta l Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent con ducting material. Th e viewing- side coating is etched into characte r forming segments with lead s that extend to the edge of the glass.
Satellite M100 Glossary-7 Glossary P parity: 1) The symmetrical relationsh ip between two parameter values (integers) both of which ar e either on or off; odd or even; 0 or 1. 2) In serial communi cations, an e rror detection bit that is added to a group of data bits making the sum of the bits even or odd.
Glossary-8 Satellite M100 Glossary T terminal: A typewriter-like keyboard and CRT display screen c onnected to the computer for dat a input/output. TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active -matrix techno logy with thin film transistor (TFT) to drive each cell.
Een belangrijk punt na aankoop van elk apparaat Toshiba M100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba M100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba M100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba M100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba M100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba M100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba M100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba M100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.