Gebruiksaanwijzing /service van het product MK4006GAH van de fabrikant Toshiba
Ga naar pagina of 153
Toshiba Corporation Digital Media Network Company Page 1 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 1.1.1.1.1.1.1.1 TOSHIBA TOSHIBA Hard Disk Drive Specification 1.
Toshiba Corporation Digital Media Network Company Page 2 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Revision History 1.8 inch Hard Disk Drive MK6006GAH/MK4006GAH/MK3006GAL Produ.
Toshiba Corporation Digital Media Network Company Page 3 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The hard disk drive and product specifications contain essential information for the protection of users and others from possible injury and property damage and to ensure correct handling.
Toshiba Corporation Digital Media Network Company Page 4 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ● Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc.
Toshiba Corporation Digital Media Network Company Page 5 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ■ Do not drop.
Toshiba Corporation Digital Media Network Company Page 6 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Observe the following to prevent failure, malfunction or data loss. ● Follow the specifications for 7. POWER SUPPLY (page17), 9.
Toshiba Corporation Digital Media Network Company Page 7 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved TABLE OF CONTENTS 1. SCOPE .....................................................................................................
Toshiba Corporation Digital Media Network Company Page 8 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.4 H OST I NTERFACE T IMING ..................................................................................................
Toshiba Corporation Digital Media Network Company Page 9 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.8.35 Set Features (EFh) .....................................................................................................
Toshiba Corporation Digital Media Network Company Page 10 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table of Figures F IGURE 1 MK3006GAL D IMENSIONS ..............................................................................
Toshiba Corporation Digital Media Network Company Page 11 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 2. SCOPE This document describes the specif ications of the following model, MK3006GAL /MK4006GAH/MK6006GAH of 1.8- inch type Winchester disk drives.
Toshiba Corporation Digital Media Network Company Page 12 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ● There is a certain probability of the drive causing failure including data error or data loss.
Toshiba Corporation Digital Media Network Company Page 13 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 4. KEY FEA TURES • High capacity in smallest size . 1.8 inch-type 2 platters accommoda ting formatted capacity of 60.0116GB (MK6006GAH)/40.
Toshiba Corporation Digital Media Network Company Page 14 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved . Low power consumption by Adaptive Power Mode Control .
Toshiba Corporation Digital Media Network Company Page 15 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 5. BASIC SPECIFICA TION MODEL MK3006GAL MK6006GAH MK4006GAH Formatted Capacity ( gigabytes ) 30.
Toshiba Corporation Digital Media Network Company Page 16 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 6. PERFORMANCE MK3006GAL MK6006GAH MK4006GAH Access time ( msec ) <*1> Track to track seek <*2> 3 Average seek <*3> 15 Max.
Toshiba Corporation Digital Media Network Company Page 17 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 7. POWER REQUIREMENTS 7.1 Supply V oltage Allowable voltage 3.3V + 5% Allowable noise/ripple 70 mV p-p or less (note 1) W h en DC power is interrupted,+3.
Toshiba Corporation Digital Media Network Company Page 18 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 8. MECHANICAL SPECIFICA TIONS 8.1 Dimension and weight MK3006GAL MK6006GAH/MK4006GAH Width (mm) 54.0 ± 0.2 Height (mm) 5.0 + 0.
Toshiba Corporation Digital Media Network Company Page 19 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 8.3.1 Installation 1) The drive should be interconnected of mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion.
Toshiba Corporation Digital Media Network Company Page 20 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Figure 1 MK3006GAL Dimensions UNIT: m m.
Toshiba Corporation Digital Media Network Company Page 21 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Figure 2 MK6006GAH/MK4006GAH Dimensions UNIT: mm.
Toshiba Corporation Digital Media Network Company Page 22 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9. ENVIRONMENT AL LIMITS 9.
Toshiba Corporation Digital Media Network Company Page 23 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9.4 Altitude Operating - 300 m to 3,000 m Non operating - 400 m to 15,000 m 9.5 Acoustics ( Sound Power ) MK3006GAL MK6006GAH/ MK4006GAH 16dB 18dB For idle mode ( Spindle in rotating ).
Toshiba Corporation Digital Media Network Company Page 24 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 9.6 Safety S tandards The drive satisfies the following standards . MK3006GAL MK6006GAH/MK4006GAH Underwriters Laboratories (UL) 1950 Canadian Standard Association (CSA)C22.
Toshiba Corporation Digital Media Network Company Page 25 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved EMC Adaptability The drive satisfies the following standards .
Toshiba Corporation Digital Media Network Company Page 26 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10. RELIABILITY A failure is defined as an inability of the drive to perfo r.
Toshiba Corporation Digital Media Network Company Page 27 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 10.6 Load/Unload Be sure to issue and complete the following commands for unloading before cutting off the power supply. Following table shows the specific ation for normal load/unload cycles.
Toshiba Corporation Digital Media Network Company Page 28 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11. HOST INTERF ACE Related Standards Information technology - AT Attachment Interface with Extensi ons (ATA-2) X3T10.
Toshiba Corporation Digital Media Network Company Page 29 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.2 Electrical specification 11.2.1 Cable length and capacitance 0.46m MAX 35pF MAX 11.2.2 DC input/output Characteristics 11.
Toshiba Corporation Digital Media Network Company Page 30 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3 Interface connector 11.
Toshiba Corporation Digital Media Network Company Page 31 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.2 Pin Assignment The following table describes all of the pins on the Task File Interface. Table 11.3-1 Signal pin assignm ent PIN No.
Toshiba Corporation Digital Media Network Company Page 32 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.3 Signal Treatment Driver types and requirem ents for the signal pull - up and down are as follows. Resistor requi reme n t is mi nimu m for t he host.
Toshiba Corporation Digital Media Network Company Page 33 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.3.4 Series resistance Each signal has its own series resistance.
Toshiba Corporation Digital Media Network Company Page 34 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved CSEL O 28 If jumper pins B through D are assigned, Master/Slave setting w ith this pin is valid. When grounded, the drive recognizes itself as a Master.
Toshiba Corporation Digital Media Network Company Page 35 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4 Host Interface Timing 11.4.1 Program I/O Write Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASW Address Setup to -DOW Low (min.
Toshiba Corporation Digital Media Network Company Page 36 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.2 Program I/O Read Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASE Address Setup to -DIOR Low (min.) 70 50 30 30 25 t RE -DIOR Pulse Width (min.
Toshiba Corporation Digital Media Network Company Page 37 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.3 Multiword DMA Write Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Max. Min. Max.
Toshiba Corporation Digital Media Network Company Page 38 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.4 Multiword DMA Read Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Ma x. Min. Max.
Toshiba Corporation Digital Media Network Company Page 39 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.5 Ultra DMA Timing Initiating an Ultra DMA data in burst DMARQ (dev i c.
Toshiba Corporation Digital Media Network Company Page 40 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data in burst t DVH t DVHIC DSTROBE at dev ic e DD(15:0).
Toshiba Corporation Digital Media Network Company Page 41 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ultra DMA data in burst t AZ t IO RDYZ CRC DMARQ (dev .
Toshiba Corporation Digital Media Network Company Page 42 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data in burst t CVH CRC t AZ DMARQ (dev i ce) .
Toshiba Corporation Digital Media Network Company Page 43 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Initiating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (.
Toshiba Corporation Digital Media Network Company Page 44 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data out burst t DH t DHIC t DVH t DVHIC HSTROBE at host.
Toshiba Corporation Digital Media Network Company Page 45 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) .
Toshiba Corporation Digital Media Network Company Page 46 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ul tra DMA data out burst DMARQ (dev i ce) DMACK- (hos.
Toshiba Corporation Digital Media Network Company Page 47 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved ATA/ATAPI specifications Transfer mode MODE 0 MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 Symbo l Meaning Min. Max. Min. Max. Min. Ma x.
Toshiba Corporation Digital Media Network Company Page 48 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.4.6 Reset Timing t M t N BUSY - RE S E T Symbol Meaning Minimum Maximum Unit Condition t M RESET pulse width (Low) 25 µ s t N RESET inactive to BSY active 400 ns 11.
Toshiba Corporation Digital Media Network Company Page 49 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.6 Address Decoding The host addresses the drive using programmed I/O. In this method, the required register address should be placed on the three host address lines, DA2 - DA0.
Toshiba Corporation Digital Media Network Company Page 50 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7 Register Description In the following register descriptions, unused write bit should be treated as “don't care”, and unused read bits should be read as zeros.
Toshiba Corporation Digital Media Network Company Page 51 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.2 Error Register - CS0 DA2-DA0 : 1 Read ONLY 11.7.2.1 Operational Mode The following descriptions are bit definitions for the oper ational mode including the error information from the last command.
Toshiba Corporation Digital Media Network Company Page 52 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.3.1 Smart command This command is used with the Smart commands to select subcommands. 11.7.4 Sector Count Register - CS0 DA2-DA0 : 2 Read / Write 11.
Toshiba Corporation Digital Media Network Company Page 53 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.5 Sector Number Register - CS0 DA2-DA0 : 3 Read / Write The target logical sector number (starting from 1) for Read, Write, and Verify commands is set in this register.
Toshiba Corporation Digital Media Network Company Page 54 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.7.2 SMART commands This register should be set to C2h for SMART commands 11.7.8 Device/Head Register - CS0 DA2-DA0 : 6 Read / Write The value of this register is used to select the dr ive, Drive0 or Drive1, and head.
Toshiba Corporation Digital Media Network Company Page 55 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.9 Status Register -CS0 DA2-DA0:7 Read only This register contains the command status. The contents of the register are updated at the completion of each command and whenever the error occurs.
Toshiba Corporation Digital Media Network Company Page 56 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.10 Command Register - CS0 DA2-DA0 : 7 Write only The command register accepts commands for the driv e to perform fixed disk operations.
Toshiba Corporation Digital Media Network Company Page 57 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.7-2 Comm and Code Command Code Command Name Hex Value PARAMETERS US.
Toshiba Corporation Digital Media Network Company Page 58 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.7.11 Alternate Status Register - CS1 DA2-DA0 : 6 Read only This register contains the same information as the stat us register in the Task File.
Toshiba Corporation Digital Media Network Company Page 59 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved -HEAD SELECT represents one’s complement of the binary coded address of currently selected head, but does not show actual selection of the head.
Toshiba Corporation Digital Media Network Company Page 60 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8 Command Descriptions The drive interprets the commands written in the comm and register by the host sy stem and executes them.
Toshiba Corporation Digital Media Network Company Page 61 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.1 Nop (00h) COMMAND CODE 0 0 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 62 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.5 Read Sector (20h/21h) COMMAND CODE 0 0 1 0 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 63 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.7 Write Sector (30h/31h) COMMAND CODE 0 0 1 1 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 64 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved This command is available in LBA addressing only. 11.8.9 Read Verify (40h) COMMAND CODE 0 1 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 65 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.11 Write Verify 6 (3Ch) COMMAND CODE 0 0 1 1 1 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 66 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Sector interleave is always set to one regardless of sector sequence in the format table. Data subsequent to format table are handled as “Don't care”.
Toshiba Corporation Digital Media Network Company Page 67 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.15 Execute Diagnostics (90h) COMMAND CODE 1 0 0 1 0 0 0 0 REGISTER REGI.
Toshiba Corporation Digital Media Network Company Page 68 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.17 Download Microcode (92h) COMMAND CODE 1 0 0 0 0 0 1 0 REGISTER REGIS.
Toshiba Corporation Digital Media Network Company Page 69 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.18 Read Multiple (C4h) COMMAND CODE 1 1 0 0 0 1 0 0 REGISTER REGISTER S.
Toshiba Corporation Digital Media Network Company Page 70 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.19 Read Multiple EXT (29h) COMMAND CODE 0 0 1 0 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 71 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved After the transfer of a data block which contains a se ctor with error, the contents of the Command Block Registers are undefined.
Toshiba Corporation Digital Media Network Company Page 72 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.21 Write Multiple EXT (39h) COMMAND CODE 0 0 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 73 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.23 Read DMA (C8h/C9h) COMMAND CODE 1 1 0 0 1 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 74 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.25 Write DMA (CAh/CBh) COMMAND CODE 1 1 0 0 1 0 1 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 75 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27 Power Control (Exh) COMMAND CODE 1 1 1 0 X X X X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 76 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27.3 Stand-by (E2/96) This command causes the device to enter stand-by mode. If SC is non-zero then stand-by timer shall be enabled.
Toshiba Corporation Digital Media Network Company Page 77 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.28 Read Buffer (E4h) COMMAND CODE 1 1 1 0 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 78 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-1 Identify Informat ion WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 79 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-2 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 80 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-3 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 81 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-4 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 82 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-5 Identify Inform ation (Conti nued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 83 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Word descriptions: WORD 0: General configuration bit 15 0=ATA bit 14-8 Reserved bit 7 1=Removable cartridge bit 6 1=Fixed disk drive bit 5-3 Reserved bit 2 Response incomplete bit 1-0 Reserved The value for this WORD is 0040h.
Toshiba Corporation Digital Media Network Company Page 84 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 47: bit 15 - 8 shall be set to 80h bit 7 - 0 Maximum number of sectors that can be transferred per interrupt on READ/WRITE MULTIPLE commands.
Toshiba Corporation Digital Media Network Company Page 85 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 57-58: Total number of sectors calculated by word 54 - 56 bit31-24 by word 58 bit 7- 0 bit23-16 by word 58 bit 15- 8 bit15- 8 by word 57 bit 7- 0 bit 7- 0 by word 57 bit 15- 8 The power on values for each models are.
Toshiba Corporation Digital Media Network Company Page 86 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 65: Minimum multiword DMA transfer mode cycle time per word (ns) If this bit is supported, word 53 bit 1 shall be set. The value for this WORD is 0078h (120ns).
Toshiba Corporation Digital Media Network Company Page 87 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 83: Features/Command sets supported bit 15 0 (Fixed) bit 14 1 (Fixed) b.
Toshiba Corporation Digital Media Network Company Page 88 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 86: Features / Command sets enabled bit 15-14 Reserved bit 13 1=FLUCH C.
Toshiba Corporation Digital Media Network Company Page 89 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 90: Time required for Enhanced Security erase completion WORD 91: Current Advanced Power Management setting bit 15-8 Reserved bit 7-0 Current Advanced Power Management setting set by Set Features Command.
Toshiba Corporation Digital Media Network Company Page 90 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved WORD 128: Security status bit 15-9 Reserved bit 8 the security level.
Toshiba Corporation Digital Media Network Company Page 91 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31 SET MAX (F9h) Individual SET MAX commands are identified by the value placed in the Features register. Table 11.8-6 shows these Features register values.
Toshiba Corporation Digital Media Network Company Page 92 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.2 Set Max Set Password F9h with the content of the Features register equal to 01h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 93 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.4 Set Max Unlock F9h with the content of the Features register equal to 03h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 94 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.32 SET MAX ADDRESS EXT (37h) COMMAND CODE 0 0 1 1 0 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 95 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.34 Read Native Max Address EXT (27h) COMMAND CODE 0 0 1 0 0 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 96 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.35 Set Features (EFh) COMMAND CODE 1 1 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 97 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.36 SECURITY SET PASSWORD (F1h) COMMAND CODE 1 1 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 98 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.37 SECURITY UNLOCK (F2h) COMMAND CODE 1 1 1 1 0 0 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 99 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.39 SECURITY ERASE UNIT (F4h) COMMAND CODE 1 1 1 1 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 100 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.41 SECURITY DISABLE PASSWORD (F6h) COMMAND CODE 1 1 1 1 0 1 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 101 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.1 SMART Read Attribute values COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 102 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Byte Description 0 Attribute ID number 01 - FFh 1-2 Status flag bit 0 (pre-failure/advisory bit) bit 0 = 0: If attribute value is less than the threshold, the drive is in advisory condition.
Toshiba Corporation Digital Media Network Company Page 103 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved BYTE 362: Off-line data collection status Value Definition 00h or 80h Off-line data collection activity was never started. 01h Reserved 02h or 82h Off-line data collection activi ty was completed without error.
Toshiba Corporation Digital Media Network Company Page 104 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved bit 3 (off-line read scanning implemented bit) If this bit is cleared to zero, the dev ice does not support off-line read scanning.
Toshiba Corporation Digital Media Network Company Page 105 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.2 SMART Read Attribute thresholds COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 106 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.3 SMART Enable Disable Attribute Autosave COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 107 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.5 SMART Execute Off-line Immediate COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 108 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved e) If the device is in the process of performing the subcommand routine and.
Toshiba Corporation Digital Media Network Company Page 109 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved LBA 0 User LBA s pace LBA max Test span 1 Starting LBA for test span 1 Endi.
Toshiba Corporation Digital Media Network Company Page 110 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6 SMART Read Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 111 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved SMART Log Directory Byte Descriptions 0-1 SMART Logging Version 2 Number of.
Toshiba Corporation Digital Media Network Company Page 112 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.2.3 Command data structure The fifth command data structure will contain the command or reset for which the error is being reported.
Toshiba Corporation Digital Media Network Company Page 113 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved State field values Value State x0h Unknown x1h Sleep x2h Standby x3h Ac tiv.
Toshiba Corporation Digital Media Network Company Page 114 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Comprehensive error log Byte First sector Subsequent sectors 0 SMART error .
Toshiba Corporation Digital Media Network Company Page 115 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Self-test log data structure Byte Descriptions 0-1 Self-test log data structure revision number 2-25 First descriptor entry 26-49 Second descriptor entry .
Toshiba Corporation Digital Media Network Company Page 116 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.4.3 Self-test index The self-test index will point to the most recent entry . Initially, when the log is empty, the index will be set to zero.
Toshiba Corporation Digital Media Network Company Page 117 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.5.3 Current LBA under test The Current LBA under test field shall be written with a val ue of zero by the host.
Toshiba Corporation Digital Media Network Company Page 118 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.7 SMART Write Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 119 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.9 SMART Disable Operations COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 120 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.11 SMART Enable/Disable Automatic Off-line COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 121 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43 Read Log EXT (2Fh) COMMAND CODE 0 0 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 122 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved General Purpose Log Directory Byte Descriptions 0-1 General Purpose Logging.
Toshiba Corporation Digital Media Network Company Page 123 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43.2.3 Extended Error log data structure The error log is viewed as a circular buffer.
Toshiba Corporation Digital Media Network Company Page 124 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Command data structure Byte Descriptions n Content of the Device Control register when the Command register was written. N+1 Content of the Features register (7:0) w hen the Command register was written.
Toshiba Corporation Digital Media Network Company Page 125 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved State shall contain a value indicating the state of the device when the command was written to the Command register or the reset occurred as described in the fo llo wing table.
Toshiba Corporation Digital Media Network Company Page 126 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Extended Self-test log data structure Byte First sector Subsequent sectors .
Toshiba Corporation Digital Media Network Company Page 127 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Life timestamp shall contain the power-on lifetime of the device in hours when the nth self-test subcommand was completed.
Toshiba Corporation Digital Media Network Company Page 128 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.1 Device Configuration Restore COMMAND CODE 1 0 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 129 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The DEVICE CONFIGURATION IDENTIFY command returns a 512 byte data structure via PIO data-in transfer.
Toshiba Corporation Digital Media Network Company Page 130 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.3.1.3 Word 2: Ultra DMA modes supported Word 3 bits 5-0 contain the same information as cont ained in word 88 of the IDENTIFY DEVICE or IDENTIFY PACKET DEVICE command response.
Toshiba Corporation Digital Media Network Company Page 131 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.1 Error outputs Register 7 6 5 4 3 2 1 0 Error na na na na na ABR.
Toshiba Corporation Digital Media Network Company Page 132 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The format of the overlay transmitted by the device is described inTable 11.8-9. The restrictions on changing these bits is described in the text following Table 11.
Toshiba Corporation Digital Media Network Company Page 133 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.2.3 Word 2: Ultra DMA modes supported Word 2 bits 15:6 are reserved.
Toshiba Corporation Digital Media Network Company Page 134 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Word 7 bit 4 is cleared to disable support for the Power- up in Standby fea.
Toshiba Corporation Digital Media Network Company Page 135 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9 Security Mode Feature Set The Security mode features allow the host to impl ement a security password system to prevent unauthorized access to the disk drive.
Toshiba Corporation Digital Media Network Company Page 136 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.3 Security mode operation from power-on In locked mode, the drive rejects media a ccess commands until a SECURITY UNLOCK command is successfully completed.
Toshiba Corporation Digital Media Network Company Page 137 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.4 Password lost If the user password is lost and High level security is set, the drive does not allow the user to access any data.
Toshiba Corporation Digital Media Network Company Page 138 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.9.5 Command Table This command table shows the drive’s response to commands when the Security Function is enabled. Table 11.
Toshiba Corporation Digital Media Network Company Page 139 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.10 Self-Monitoring, Analysis and Reporting T echnology Self-monitoring, .
Toshiba Corporation Digital Media Network Company Page 140 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.11 Adaptive Power Mode Control Adaptive Power Mode Control is a function to reduc e power consumption without performance degradation.
Toshiba Corporation Digital Media Network Company Page 141 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.12 Reset A RESET condition sets the drive ( or both drives in case of Drive0/Drive1 connection ) BSY, allowing the drive to perform the specified initia lization required for normal operation.
Toshiba Corporation Digital Media Network Company Page 142 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.13 Drive0/Drive1 Configuration Drive address shall be set by the optional jumper of interface connector.
Toshiba Corporation Digital Media Network Company Page 143 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 11.14 Cache Memory 11.14.1 Cache Operations (1) READ CACHE OPERATION Receiv.
Toshiba Corporation Digital Media Network Company Page 144 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12. Protocol Commands can be grouped into different classes accordi ng to the protocols used for command execution. The command classes with their asso ciated protocols are defined below.
Toshiba Corporation Digital Media Network Company Page 145 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.1 PIO data in commands Commands for this class are: • IDENTIFY DEVICE .
Toshiba Corporation Digital Media Network Company Page 146 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved • WRITE MULTIPLE • WRITE MULTIPLE EXT • WRITE SECTOR(S) (with and wit.
Toshiba Corporation Digital Media Network Company Page 147 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved The Write Multiple command transfers one block ( the number of sectors is defined by the Set Multiple command ) of data for each interrupt.
Toshiba Corporation Digital Media Network Company Page 148 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved b) The host writes the command code t o the Comm and register. c) The d rive sets the BSY bit . d) Wh en the drive has fini shed processing a sector (or block) of data, it cl ears the BSY bit and asserts INTRQ.
Toshiba Corporation Digital Media Network Company Page 149 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.4 DMA data transfer commands Commands for this class are: • READ DMA (.
Toshiba Corporation Digital Media Network Company Page 150 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.5 Ultra DMA Ultra DMA protocol is used with Read DMA, and Wri te DMA commands. Ultra DMA modes are set by Set features command.
Toshiba Corporation Digital Media Network Company Page 151 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 3. Ultra DMA burst termination phase a) Either a sender or a recipient may terminate an Ultra DMA burst. b) Ultra DMA burst termination is not the same as command termination or completion.
Toshiba Corporation Digital Media Network Company Page 152 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved Combinational Logic Edge Trigger ed Register Device CRCOUT (15:0) CRCIN (15.
Toshiba Corporation Digital Media Network Company Page 153 of 153 © 2003, Copyright TOSHIBA Corporation All Rights Reserved 12.6 Other timings See HOST INTERFACE section for timings which are not shown here.
Een belangrijk punt na aankoop van elk apparaat Toshiba MK4006GAH (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba MK4006GAH heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba MK4006GAH vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba MK4006GAH leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba MK4006GAH krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba MK4006GAH bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba MK4006GAH kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba MK4006GAH . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.