Gebruiksaanwijzing /service van het product satellite p100 van de fabrikant Toshiba
Ga naar pagina of 314
Toshiba Personal Computer Satellite P100 Series Maintenance Manual TOSHIBA CORPORATION File Number 960-Q02.
2 Satellite P100 Maintenance Manual (960-Q02) Copyright © 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein.
Satellite P100 Maintenance Manual (960-Q02) 3 Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite P100 Series. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field.
4 Satellite P100 Maintenance Manual (960-Q02) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite P100 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
Satellite P100 Maintenance Manual (960-Q02) 5 Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition.
6 Satellite P100 Maintenance Manual (960-Q02) Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram .
Satellite P100 Maintenance Manual (960-Q02) 7 Procedure 1 Message Check ....................................................................... 1 4 Procedure 2 Debugging Port Check ............................................................ 1 6 Procedure 3 Diagnostic Test Program Execution Check .
8 Satellite P100 Maintenance Manual (960-Q02) 2.9 Display Troubleshooting..............................................................................................35 Procedure 1 External Monitor Check...............................................
Satellite P100 Maintenance Manual (960-Q02) 9 Chapter 3 Test Program for Field 3.1 Tests and Diagnostics Software Overview ................................................................. 3-3 3.2 Executing the Diagnostic Test ........................
10 Satellite P100 Maintenance Manual (960-Q02) 3.21.1 How to operate a window …………………………………………3-62 3.21.2 How to Stop the Test Program ……………………………………. 3-62 3.21.3 Test Status Screen …………………………………………………3-62 3.
Satellite P100 Maintenance Manual (960-Q02) 11 4.18 CPU .......................................................................................................................... 4- 47 4.19 VGA heat sink................................................
12 Satellite P100 Maintenance Manual (960-Q02) Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ......................................................
Satellite P100 Maintenance Manual (960-Q02) 13.
Chapter 1 Hardware Overview.
Chapter 1 Hardware Overview 1-2 Satellite P100 Maintenance Manual(960-Q0 2) 1 Hardware Overview.
Hardware Overview Chapter 1 Satellite P100 Maintenance Manual(960-Q02) 1- 1 Chapter 1 Contents 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram .
Chapter 1 Hardware Overview 1-2 Satellite P100 Maintenance Manual(960-Q0 2) Figures Figure 1-1 Front of the computer a nd the system units configuration ................................6 Figure 1-2 System block diagram ................................
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 1 Features 1.1 Features The Satellite P100 (Intel Platform) series are 2 spindle PCs running Intel® Celeron® M Processor 410 or higher. Intel® Core™ Solo Processor T1300 or higher.
Chapter 1 Hardware Overview 2 Satellite P100 Mainten ance Manual(96 0-Q02) θ VRAM Shared with System RAM for Intel 945 GM. NVIDIA G71M /G72MV/G73M exte rnal graphics for Intel 945 PM. θ HDD 40GB, 60GB, 80GB, 100GB, and 120GB inte rnal drives. 2.5 inch x 9.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 3 θ PC card slot The PC card slot (PCMCIA) accommodates one 5mm Type II card. The slot support 16-bit PC cards and Card Bus PC cards. Card Bus supports 32-bit PC cards. θ Optical devices A DVD-ROM & CD-R/RW drive or DVD Super Multi drive is equipped.
Chapter 1 Hardware Overview 4 Satellite P100 Mainten ance Manual(96 0-Q02) θ Express Card ExpressCard/34 and Expre ssCard/54 are supported. θ Multiple Digital Media Card Slot MD/MS/MS pro/SDIO/MMC are supported θ Bluetooth USB Bluetooth Module (BTO) V2.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 5.
Chapter 1 Hardware Overview Figure 1-1 Front of the computer an d the system units’ configuration 6 Satellite P100 Mainten ance Manual(96 0-Q02).
Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block diagram for Intel Pla tform Platform Satellite P100 Maintenance Manual (960-Q02).
Chapter 1 Hardware Overview 8 Satellite P100 Mainten ance Manual(96 0-Q02) The PC contains the following components. θ CPU Intel Core Duo T2300(1.66GHz) T2400(1.83GHz), T2500 (2GHz), T2600(2.16Gz) , T2700(2.33Gz) Intel Core Solo T1400(1.83GHz) T1300 (1.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 9 • South Bridge (Intel 82801GBM (ICH7-M)) − PCI slot − PCI Express − IDE controller − Serial ATA Host Controller − DMA controller − USB host interface − USB 2.
Chapter 1 Hardware Overview 10 Satellite P100 Mainten ance Manual(96 0-Q02) θ Mini Card Wireless LAN card (BTO) 2.4GHz DSSS/OFDM LAN card is equi pped. Conformity with IEEE 802.11b/g and IEEE 802.11a/b/g.. Transfer speed ma ximum is 54Mbit/sec. supports 128bit WEP.
Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3 shows a view of the 2.5-inch HDD and Tables 1-1 and 1-2 list the specifications.
Chapter 1 Hardware Overview 12 Satellite P100 Mainten ance Manual(96 0-Q02) Standard value Parameter HITACHI HTS541040G9 SA00 HITACHI HTS541060G9 SA00 HITACHI HTS541080G9 SA00 HITACHI HTS541010G9 SA00 Width (mm) 69.85 Height (mm) 9.5 Depth (mm) 100.0 Outlin e dimen sions Weight (g) 97/ 98 (max.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 13 Specification Parameter FUJITSU MHV2120B H FUJITSU MHV2100B H FUJITSU MHV2080B H FUJITSU MHV2060B H FUJITSU MHV2040B H FUJITSU MHV2160BT Storage size (format ted) 120GB 10 0GB 80GB 60GB 40GB 160GB Speed (RPM) 5,400 4,200 Data transfer speed (Mbits/s) 236.
Chapter 1 Hardware Overview Specification Parameter HITACHI HTS541040G9 SA 00 HITACHI HTS541040G9 S A00 HITACHI HTS541040G9 SA00 HITACHI HTS541040G9 S A00 Storage size (formatted) 40GB 60GB 80GB 100GB Speed (RPM) 5,400 Data transfer speed(Mbits/s) 493 493 493 493 bus transfer rate (MB/s) 150 ATA7/S ERIAL ATA1.
Chapter 1 Hardware Overview Specification Parameter HITACHI HTS721060G9AT 00 HITACHI HTS721080G9AT 00 HITACHI HTS721010G9AT 00 Storage size (formatted) 60GB 80GB 100GB Speed (RPM) 7,200 Data transfer speed(Mbits/s) 267-629 bus transfer rate (MB/s) 150 ATA7/SERIA L ATA1.
Chapter 1 Hardware Overview 1.4 Optical Drive 1.4.1 DVD-ROM & CD-R/RW Drive The DVD-ROM & CD-R/RW drive accommodates e ither 12 cm (4.72-inch) or 8 cm (3.15- inch) CD/DVD-ROM and CD-R/RW. It is a high-performance driv e that reads DVD at maximum 8-speed and CD at m aximum 24-speed.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 17 Table 1-4 DVD-ROM & CD-R/RW drive specifications (1/3) Drive Specification Parameter MATSUSHITA (UJDA7 70TT-A) Read (KB/s) DVD-ROM MAX 8X CAV (MAX 10800 KB/s) CD-ROM MAX 24X CAV (MAX 3600 KB/s) Write CD-R 4X , 8X (CLV), 16XZCLV, MAX.
Chapter 1 Hardware Overview 18 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-4 DVD-ROM & CD-R/RW drive specifications (2/3) Drive Specification Parameter HLDS (GCC-4244N.ATAKN0) Read (KB/s) DVD-ROM Single Layer3.3x -8x (CAV):Approx. 4,710 r/min Dual Layer3.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 19 CD CD-ROM Mode1&2S CD-ROM XA Modo2 (Form1&2) CD-DA, CD-I, CD-Extra/CD -Plus, Video-CD Supported disk format DVD DVD-R.
Chapter 1 Hardware Overview 20 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-4 DVD-ROM & CD-R/RW drive specifications (3/3) Drive Specification Parameter TSST (TS-L462C/TOHJ,I.
Chapter 1 Hardware Overview 1.4.2 DVD Super Multi Drive The DVD Super Multi drive accommodates eith er 12 cm (4.72-inch) or 8 cm (3.15-inch) CD/DVD-ROM, CD-R/RW, DVD±R/±RW and DVD-RA M. It is a high-performance drive that reads DVD-ROM at maximum 8-speed a nd CD at maximum 24-sp eed.
Chapter 1 Hardware Overview 22 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-6 DVD Super Multi drive specifica tions (1/4) Drive Specification Parameter Panasonic (UJ-850BTJV-A) Read(KB/s) DVD-ROM MAX 8X CAV (MAX 10800 KB/s) CD-ROM MAX 24X CAV (MAX 3600 KB/s) Write CD-R 4X , 8X (CLV) , MAX.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 23 Table 1-2 DVD Super Multi drive specifica tions (2/4) Drive Specification Parameter HLDS (GSA-4082N.ATAKN0) Read(KB/s) DVD-R/RW/R OM 8x/8x/8x max. DVD-RAM (Ver.1.0)2x (Ver.2.2)2x, 3x, 5x DVD-Video (CSSCompliant Disc)4x max.
Chapter 1 Hardware Overview 24 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-6 DVD Super Multi drive specifica tions (3/4) Drive Specification Parameter Pioneer(DVR-K16TBA) Read(KB/s) 8X CAV at.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 25 Table 1-6 DVD Super Multi drive specifica tions (4/4) Drive Specification Parameter TEAC (DV-W28EA) Read(KB/s) 8X CAV at DVD-.
Chapter 1 Hardware Overview 26 Satellite P100 Mainten ance Manual(96 0-Q02).
Chapter 1 Hardware Overview 1.5 Keyboard The Satellite P100 comes with a "desktop-style" keyboard bu ilt into it. This means it is full- sized and features a full set of numeric functi on keys (also known as calculator keys) on the right-hand side.
Chapter 1 Hardware Overview 1.6 TFT Color Display The TFT color display is 17.1 inch and consis ts of LCD module and FL inverter board. 1.6.1 LCD Module The LCD module used for the TFT color display us es a backlight as the light source and can display with 1,440x 900 dots (WXGA+) or 1,680x1,050 dots(WSXGA+) resolution.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 29 1.6.2 FL Inverter Board The FL inverter board supplies a high freque ncy current to illuminate the LCD module FL.
Chapter 1 Hardware Overview 30 Satellite P100 Mainten ance Manual(96 0-Q02) 1.7 Power Supply The power supply supplies 23 different voltages to the system board. The power supply microcontroller has the following functions. 1. Judges if the DC power supply (AC adap ter) is connected to the computer.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 31 Table 1-9 Power supply output rating Power supply （ Yes/No ） Name Voltage [V] Power OFF Suspend mode Power OFF Boot mode No Battery Object VCC_CORE 1.484 - 0.748 No No No CPU VTT 1.
Chapter 1 Hardware Overview 32 Satellite P100 Mainten ance Manual(96 0-Q02) 1.8 Batteries The PC has the following two batteries. θ Main battery θ Real time clock (RTC) battery Table 1-10 lists the specifica tions for these two batteries. Table 1-10 Battery specification s Battery Name Battery Element Output Voltage Capacity Sanyo 9 cell 10.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 33 1.8.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The power supply microprocessor controls power supply and dete cts a full charge when the AC adaptor and battery are connected to the computer.
Chapter 1 Hardware Overview 34 Satellite P100 Mainten ance Manual(96 0-Q02) 1.8.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory. Table 1-13 lists the Time required for charges of RTC battery and data preservation time.
Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 35 1.9 AC Adapter The AC adapter is used to charge the battery. Table 1-14 lists the AC adapter specifications.
2-1 [CONFIDENT IAL] Chapter 2 Troubleshooting Procedures.
2-2 [CONFIDENTIAL] Satellite P100 Maintenance Manual(960-Q02) 2.
Satellite P100 Mainten ance Manual(96 0-Q02) 2-3 Chapter 2 Contents 2.1 Troubleshooting .............................................................................................................1 2.2 Troubleshooting Flowchart ......................
2-4 [CONFIDENTIAL] Satellite P100 Maintenance Manual(960-Q02).
Satellite P100 Mainten ance Manual(96 0-Q02) 2-5 2.9 Display Troubleshooting ..............................................................................................35 Procedure 1 External Monitor Check ..........................................
2-6 [CONFIDENTIAL] Satellite P100 Maintenance Manual(960-Q02).
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 1 2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1.
2 Troubleshooting Procedures There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is descri bed in the figure as line. (2) Pin connection is describe d in the figure as arrow.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 3 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute.
2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) 4 Satellite P100 Mainten ance Manual(96 0-Q02).
2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) Satellite P100 Maintenance Manual (960-Q02) 5.
2 Troubleshooting Procedures 6 Satellite P100 Mainten ance Manual(96 0-Q02) If the diagnostics program cannot detect an e rror, the problem may be intermittent.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 7 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instructed.
2 Troubleshooting Procedures 8 Satellite P100 Mainten ance Manual(96 0-Q02) Table 2-2 DC IN icon DC IN icon Power supply status Lights green DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunction *1 Doesn’t light Any condition other than those above.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 9 Procedure 2.
2 Troubleshooting Procedures Procedure 3 Connection Check The wiring diagram related to th e power supply is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord is firmly plugged into the DC IN socket (CN21/34) and wall outlet.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 11 Check 4 The battery’s temperature is too high or low. Leave the battery for a while to adjust it in the right temperature. If th e battery pack is s till n ot charged, go to Check 5.
2 Troubleshooting Procedures 12 Satellite P100 Mainten ance Manual(96 0-Q02) Procedure 5 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 13 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed.
2 Troubleshooting Procedures 14 Satellite P100 Mainten ance Manual(96 0-Q02) Procedure 1 Message Check When the power is turned on, the system perfor ms the Power On Self Test (POST) installed in the BIOS ROM. The POST tests each IC on the system board and initializes it.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 15 Check 3 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If one of the following error messages (1) th rough (17), (24) or (25) is displayed, go to Procedure 4.
2 Troubleshooting Procedures Procedure 2 Debugging Port Check Check the MiniPCI Debug board. The tool for debug port test is shown below. Figure 2-2 A set of tool for debug port test The test procedures are follows: 1.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 17 Code Beeps POST Routine Description 14h Initialize keyboard controller 16h 1-2-2-3 BIOS ROM checksum 17h .
2 Troubleshooting Procedures 18 Satellite P100 Mainten ance Manual(96 0-Q02) 66h Configure advanced cache registers 67h Initialize Multi Processor APIC 68h Enable external and CPU caches 69h Setup Sys.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 19 Code Beeps POST Routine Description AAh Scan for F2 key stroke ACh Enter SETUP AEh Clear Boot flag B0h Ch.
2 Troubleshooting Procedures 20 Satellite P100 Mainten ance Manual(96 0-Q02) Code Beeps For Boot Block in Flash ROM E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Init.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 21 Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board. Refer to Chapter 3, Tests and Diagnostic, for more information on how to perform these tests.
2 Troubleshooting Procedures 22 Satellite P100 Mainten ance Manual(96 0-Q02) 2.5 USB FDD Troubleshooting To check if the USB FDD is malfunctioning or not, follow the troubl eshooting procedures below as instructed.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 23 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more information about th e diagnostics test procedures.
2 Troubleshooting Procedures Procedure 3 Connector Check and Replacement Check USB FDD is connected to USB port on system board and US board. US board is also connected to system board by cable. The connect ion of cable and board may be defective. Otherwise, they may be faulty.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 25 Check 2 USB FDD may be fau lty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 Connect USB FDD to each port embedded on system board.
2 Troubleshooting Procedures 26 Satellite P100 Mainten ance Manual(96 0-Q02) 2.6 2.5” HDD Troubleshooting To check if 2.5” HDD is malfunctioning or not, follow the troubleshooting procedures below as instructed.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 27 Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. When the test detects an error, an error message is displayed on the screen.
2 Troubleshooting Procedures 28 Satellite P100 Mainten ance Manual(96 0-Q02) Procedure 3 Format Check The computer’s HDD is formatted using the MS-DOS FORMAT program or the physical format program of the test program. To fo rmat the HDD, start with Check 1 below and perform the other steps as required.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 29 Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test.
2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check HDD(s) is/are connected to the connector(s) on the system board. Th e connection of HDD(s) and board may be defective. Otherwise, they may be faulty. Disassemble the com puter following instructions in Chapter 4, Replacement Procedures and perform the following checks.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 31 2.7 Keyboard Troubleshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed.
2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty.
2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02) 33 2.8 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed.
2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the cable is fi rmly connected to system board.
Troubleshooting Procedures Satellite P100 Mainten ance Manual 35 2.9 Display Troubleshooting To check if the computer’s display is ma lfunctioning or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD/FL cable. FL inverter board is also connected to system board by an LCD/FL cable . And, fluorescent lamp is connected to FL inverter board by HV cable.
Troubleshooting Procedures Satellite P100 Mainten ance Manual 37 Procedure 4 Replacement Check Fluorescent lamp, FL inverter, LCD module, HV cable and LCD/FL cable are connected to display circuits.
Troubleshooting Procedures 2.10 Optical Disk Drive Troubleshooting To check if optical disk drive is malfunctioni ng or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures 2.11 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed.
Troubleshooting Procedures 40 Satellite P100 Mainten ance Manual Check 2 Modem cable m ay be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty. Replace it with a new one following the steps in Ch apter 4.
Troubleshooting Procedures 2.12 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures 42 Satellite P100 Mainten ance Manual 2.13 Wireless LAN Troubleshooting To check if the computer's W ireless LAN is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective.
Troubleshooting Procedures 44 Satellite P100 Mainten ance Manual Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disa ssemble the computer and th en perform the following checks: Check 1 Wireless LAN antenna may be faulty.
Troubleshooting Procedures 2.14 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check Procedure 2: Replacem ent Check Procedure 1 Connector Check The connection of sound system is shown in the following figure.
Troubleshooting Procedures 46 Satellite P100 Mainten ance Manual Procedure 2 Replacement Check If External microphone/Headphone does not work properly, perform check 1. If Internal microphone /Speaker does not work properly, perform check 2. If HP out &SPDIF does not work properly, perform check 3.
Troubleshooting Procedures 2.15 VGA Troubleshooting Procedure 1 Diagnostic Test Program Execution Check Execute VGA test in the test program. Refer to Chapter 3, Tests and Diagnostics for more information on how to perform the test program . If any error is detected, perform Procedure 2.
Troubleshooting Procedures 48 Satellite P100 Mainten ance Manual Check 5 System board may be faulty. Replace it with a new one f ollowing the instruction in Chapter 4.
Troubleshooting Procedures 2.16 Fingerprint Troubleshooting To check if the computer’s Fingerprint is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check and Replacem ent Check Procedure 1 Diagnostic Test Program Execution Check Execute Fingerprint test in the test program .
Troubleshooting Procedures 2.17 Bluetooth Troubleshooting To check if the computer’s B lue tooth is malfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Connector Check and Replacem ent Check Procedure 1 Connector Check and Replacement Check The B lue tooth function is connected to system board.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 1 Chapter 3 Diagnostic Programs.
Test Program for Field. 2 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Chapter 3 Contents 3.1 Tests and Diagnostics Software Overview ............................................................ 3-3 3.2 Executing the Diagnostic Test .
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite P100 and Satellite Pro P100 computer systems.
Test Program for Field. 4 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.2 Executing the Diagnostic Test DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 5 The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite(Pro) P100 Diagnostics Version V1.00 (C) Copyright QUANTA Corp. 2005- [ DIAGNOSTICS MENU ] 01.
Test Program for Field. 6 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Refer to Sections 3.4 through 3.14 for detailed descriptions of Diagnostics Tests 1 through 11. Item 88 sets the floppy disk drive and hard disk drive error retry count.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 7 Use the arrow keys to highlight the desired option and press Enter . Go To Test Move the highlight bar to Go To Test and press Enter to start executing the test.
Test Program for Field. 8 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.3 Subtest names Table 3-1 lists the subtest names for each test program in the Diagnostic Test menu.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 9 Table 3-1 Subtest Names(2/3) No. Test Name No. Subtest Name 05 FLOPPY DISK TEST 01 02 03 04 05 Sequential R.
Test Program for Field. 10 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Table 3-1 Subtest Names(3/3) No. Test Name No. Subtest Name 10 MULTIMEDIA TEST 01 02 03 04 Sequential Read.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 11 3.4 System Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains two subtests.
Test Program for Field. 12 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 03 CPU Temperature This will display CPU Temperature for check , press [ESC] to exit .
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 13 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Memory Test contains five subtests that test the computer’s mem ory.
Test Program for Field. 14 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data. Test data = 0000H, 0004H, 0008H, 000CH,.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 15 Test Process: 1. Checks the memory size to determ ine the maximum size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed. 3. Writes, reads, and compares test data after a m emory refresh cycle (16ms or more).
Test Program for Field. 16 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.6 Keyboard Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains seven subtests that test the computer’s keyboard and mouse actions.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 17 Subtest 03 Hot Key Display [6 Key] This subtest is used for the 6 hot key and functions the same as Subtest 1. Subtest 04 Hot Key Display [7 Key] This subtest is used for the 7 hot key and functions the same as Subtest 1.
Test Program for Field. 18 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual LEFT PRESS RIGHT PRESS TOUCH_PAD TEST Please Do Not Press the Left and Right Button At The Same Time.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 19 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes.
Test Program for Field. 20 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25).
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 21 Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25). The data displayed is shifted 1 byte to the left for each line as shown below.
Test Program for Field. 22 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white. The screen below shows the displays when this subtest is executed.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 23 Press ENTER to display 64 gradations of red, green, blue and white on the screen To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. 24 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolution to display three windows, each window drives a different set of dots: even dots, odd dots and all dots.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 25 Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolution to display 16 colors: bl.
Test Program for Field. 26 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 27 Subtest 07 Display Page This subtest displays video pages zero through seven. To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. 28 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 29 Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. 30 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 31 NOTE: The following screen does not display correctly. It will be amended in the next version. Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12.
Test Program for Field. 32 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 33 Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display.
Test Program for Field. 34 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.8 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the diagnostics disk and insert the work disk into the FDD.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 35 Subtest 04 Write Specified Address NOTE : The first two digits of the ADDRESS indicate which track is being tested, the next two digits indicates the head, and the last two digits indicate the sector.
Test Program for Field. 36 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.9 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Hard Disk Test contains eight subtests that test the functions of the hard disk drive.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 37 Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, then reads the data while moving from cylinder to cylinder.
Test Program for Field. 38 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 39 3.10 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions.
Test Program for Field. 40 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 41 3.11 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Cach e Memory Test contains eight subtests that test the computer's cache m emory.
Test Program for Field. 42 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM. The subtest then writes the bit shift data patterns (1 bit shifted every 4 bytes ), reads the new data and compares the result with the original data.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 43 3.12 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Test Program for Field. 44 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual [ 640*480 256 ] Press [ Enter ]key 0---+---1---+---2---+---3---+---4---+---5---+---6--- 256 letter types i.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 45 [ 800*600 256 ] Press [ Enter ] key 0---+---1---+---2---+---3---+---4---+---5---+---6--- 256 letter ty pes.
Test Program for Field. 46 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual [ 1024*768 256 ] Press [ Enter ] key 0---+---1---+---2---+---3---+---4---+---5---+---6--- 256 letter ty pe.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 47 Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines.
Test Program for Field. 48 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 06 Focus Test ( “E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 49 3.13 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Multimedia Test contains four subtests that test the computer's m ultimedia functions.
Test Program for Field. 50 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.14 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The MEMORY2 Test contains four subtests that test the computer's.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 51 Tee test method is the same as Subtest2. However, the data to be used differs.
Test Program for Field. 52 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.15 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 53 Table 3-2 Error codes and error status names (2/2) NOTE: If error status name is Other Error , please refe.
Test Program for Field. 54 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.16 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 55 3.17 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.
Test Program for Field. 56 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual length with the max length , if over will retry keyin Note : Please Check New DMI Information After System Restart !! 1. **** Manufacture Name ( TOSHIBA ) - (15) 2.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 57 3.18 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log : 500 tim es).
Test Program for Field. 58 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 59 3.19 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION : * - BIOS VER = VX.
Test Program for Field. 60 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.20 Running Test Edit Item 3.20.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test. The following screen displays after pressing the Tab key to edit an item in the Running Test.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 61 1. Enter a num ber or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes. Select 0 to run the test continuously until halted by the user.
Test Program for Field. 62 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.21 Common Tests and Operation 3.21.1 How to operate a w i ndow To input parameters, or open a window use the following keys.
Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 63 Pass Count Displays the number of times the test has been executed.
Test Program for Field. 64 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.21.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the follo.
Satellite P100 Maintenanc e Manua l (960-Q02) 4-i Chapter 4 Replacement Procedures.
Replacement Procedures 4-ii Satellite P100 Main tenance Manu al (960-Q02) 4.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-iii Chapter 4 Contents 4.1 Overview ................................................................................................................... .4 - 1 Safety Precautions ..
Replacement Procedures 4-iv Satellite P100 Main tenance Manu al (960-Q02) Figures Figure 4-1 Removing the battery pack................................................................................. 4-8 Figure 4-2-1 Removing a PC card ...............
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-v Figure 4-31 Removing the display mask ............................................................................. 4-52 Figure 4-32 Removing the FL inverter ....................
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-1 4 2 4.1 Overview This chapter describes the procedure for rem oving and replacing the fi eld replaceable units (FRUs) in the PC. It may not be necessary to remove all the F RUs in order to replace one.
Replacement Procedures 4-2 Satellite P10 0 Main tenance Manual (960 -Q02) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer. DANGER: 1. In the case of the battery, always use authentic parts or equivalent parts approved by Toshiba.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-3 Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section “4.
Replacement Procedures 4-4 Satellite P10 0 Main tenance Manual (960 -Q02) Disassembly Procedure Three main types of cable connector are used. • Pressure plate connector • Spring connector • Norm.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-5 Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled. Take note of the following general points when assembling the computer.
Replacement Procedures 4-6 Satellite P10 0 Main tenance Manual (960 -Q02) Screw Tightening Torque Use the following torque when tightening screws. CAUTIO N : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall out) causing a short circuit or other damage.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-7 Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths of the screws are indicated on the computer body.
Replacement Procedures 4-8 Satellite P10 0 Main tenance Manual (960 -Q02) 4.2 Battery pack Removing the battery pack The following describes the procedure for re m oving the battery pack (See Figure 4-1). CAUTION: Take care not to short circuit the te rminals when removing the battery pack.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-9 NOTE : Dispose of the used battery pack in acco rdance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-1).
Replacement Procedures 4-10 Satellite P10 0 Main tenance Manual (960 -Q02) 4.3 PC card Removing a PC card The following describes the procedure for removing a PC card (See Figure 4-2-1). CAUTION: Insert or remove a PC ca rd in accord ance with any instructions in a PC card manual or the manuals of the com puter system you are using.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-11 Installing a PC card The following describes the procedure for inserting a PC card (See Figure 4-2-2). 1. Make sure the eject button does not stick out. 2. Insert a PC card and press it until it is securely connected.
Replacement Procedures 4-12 Satellite P10 0 Main tenance Manual (960 -Q02) 4.4 HDD Removing a HDD The following describes the procedure fo r removing a HDD (See Figure 4-3 to 4-4). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure m ay cause data loss or damage to the device.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-13 CAUTION: When a HDD is installed, they are in stalled in the position as the following figure. Figure 4-3 Removing the HDD assembly HDD Door M3.0x3.5B FLAT BIND HDD module CN 19 M2.
Replacement Procedures 4-14 Satellite P10 0 Main tenance Manual (960 -Q02) 5. Remove the following screws securing the HDD holder and remove the HDD holder .
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-15 Installing a HDD The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4). 1. Install a HDD to the HDD holder and secure it with the follo wing screws .
Replacement Procedures 4-16 Satellite P10 0 Main tenance Manual (960 -Q02) 4.5 Wireless LAN card Removing a Wireless LAN card The following describes the procedure for re m oving a Wireless LAN card (See Figure 4-5). 1. Remove the following screw of wireless cover securing wireless LAN card cover and remove it.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-17 Installing a Wireless LAN card The following describes the procedure for inst alling a Wireless LAN card (See Figure 4-5). 1. Insert a wireless LAN card terminals slantwise into the connector CN30 on the computer and press a wireless LAN card and lock the secure s crews.
Replacement Procedures 4-18 Satellite P10 0 Main tenance Manual (960 -Q02) 4.6 Memory module CAUTION: The power of the computer must be turned off when you remove a memory module. Removing a memory module w ith the power on risks dam aging the module or the computer itself.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-19 Figure 4-6 Removing a memory module Memory Module Cove r.
Replacement Procedures 4-20 Satellite P10 0 Main tenance Manual (960 -Q02) Installing a memory module To install a memory module, confirm that the com puter is in boot mode.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-21 4.7 Keyboard Removing the keyboard The following describes the procedure for rem o ving the keyboard (See Figure 4-8 to 4-9). CAUTION: As the keycap m ay fall out, when ha ndling the keyboard always hold it by the frame and do not touch the keycap.
Replacement Procedures 4-22 Satellite P10 0 Main tenance Manual (960 -Q02) Figure 4-8 Removing screws for KBD cover/keyboard Figure 4-9 Removing the keyboard/KBD cover KBD cover Keyboard Screw 2.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-23 Installing the keyboard The following describes the procedure for inst alling the keyboard (See Figure 4-8 to 4-9). 1. Turn the keyboard upside down and place it on the palm rest as its face down.
Replacement Procedures 4-24 Satellite P10 0 Main tenance Manual (960 -Q02) 4.8 Function Button Board Removing the Function Board The following describes the procedure for re m oving the Function board (See Figure 4-10). 1. Remove the following screw securing the switch membrane.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-25 Installing the Function Board The following describes the procedure for installing the switch m embrane. 1. Press Function board in the computer. 2. Secure the Function board with the following screw .
Replacement Procedures 4-26 Satellite P10 0 Main tenance Manual (960 -Q02) 4.9 Optical disk drive NOTE : Do not apply excessive force to th e top of an optical disk drive. Do not touch the shaded portion of the fi gure below, when the drive is removed or installed.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-27 Figure 4-12 Disassembling the side bracket Installing an opt ical disk drive The following describes the procedure for inst alling an optical disk drive (See Figure 4-11 and 4-12).
Replacement Procedures 4-28 Satellite P100 Main tenance Man ual (960-Q02) 4 4.10 Display assembly Removing the display assembly The following describes the procedure for rem o ving the display assembly (See Figure 4-13 to 4-17). 1. Close the display and turn the computer upside down.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-29 3. Open the display and removing the k/b cover and keyboard . Figure 4-14 Removing keyboard cover 4. Disassembly Function board and pull out the wireless LAN antenna and LCD cables from the guide, If there was Bluetooth Ante nna, pls.
Replacement Procedures 4-30 Satellite P100 Main tenance Man ual (960-Q02) 4. Opening the display to 180 degree, and remove the hinge screw . ‧ M2.5 × 6.0 FLAT BIND screw x4 (Locktight) . . Figure 4-36 Removing the hinge screw M2.5x6.0 FLAT BIND (Locktight) M2.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-31 5. Remove the LCD harness from the connector on the system board and pulling out the pole of hinge from the hole of hinge assembly, remove the display assembly from the base assembly.
Replacement Procedures 4-32 Satellite P100 Main tenance Man ual (960-Q02) Installing the display assembly The following describes the procedure for instal ling the display assem bly (See Figure 4-13 to 4-17). 1. Inserting the pole of hinge to the hole of hinge assem bly, set the display assembly on the base assembly.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-33 4.11 Bluetooth The following describes fo r installing th e display assembly (See Figure 4-18). Removing the Bluetooth 1. Pull out the Bluetooth cable connect from Bluetooth board 2.
Replacement Procedures 4-34 Satellite P100 Main tenance Man ual (960-Q02) 4.12 Cover assembly Removing the cover assembly The following describes the procedure for removing the cover assembly (See Figure 4-19 to 4-21). 1. Turn over the computer. 2. Remove the following screws securing the cover assembly from the back and bottom of computer.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-35 Figure 4-40 Removing the screws (back) 3. Disconnect the touch pad flat cable/Fin gerprint cable/Top LENS from the connector on the system board. Screws 2.5*6 Screws 2.5*6 Screws 2.
Replacement Procedures 4-36 Satellite P100 Main tenance Man ual (960-Q02) 4. Pull up and remove the cover assembly from the base assembly . Figure 4-21 Removing the cover assembly Cover assembly Base .
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-37 Installing the cover assembly The following describes the procedure for inst alling the cover assembly (See Figure 4-19 to 4-21). 1. Install the cover assem bly to the base assembly.
Replacement Procedures 4-38 Satellite P100 Main tenance Man ual (960-Q02) 4.13 Touch pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-22). 1. Peel off the glass tape and disconnect the touch pad flat cable from the connector on the touch pad and peel the al foil.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-39 Installing the touch pad The following describes the procedure for in stalling the touch pad (See F igure 4-22). 1. Peel off the separator covering on the sensor portion of a new touch pad.
Replacement Procedures 4-40 Satellite P100 Main tenance Man ual (960-Q02) 4.14 Audio Board The following describes for removing the cover assembly (See Figure 4-23). Removing the audio board 1. Pull out the audio board cable from audio board connect CN4 2.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-41 4.15 Fingerprint The following describes for removing the cover assembly (See Figure 4-24). Remove the Fingerprint 1. Pull out the fingerprint cable from connect CN5 2. Loose below screws from fingerprint board and take it out top case z M2.
Replacement Procedures 4-42 Satellite P100 Main tenance Man ual (960-Q02) 4.16 USB Board The following describes for removing the cover assembly (See Figure 4-25). Removing USB board 1. Remove the USB cable from CN4 and USBCN1 2. Loose below screw from USB board z M2.
Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-43.
Replacement Procedures 4-44 Satellite P10 0 Main tenance Manual (960 -Q02) 4.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-45 4.17 System board CAUTION: 1. W hen handling the system board, alwa ys hold by the edges. Do not touch the printed circuit face. 2. If replacing with a new system board, execu te the subtest01 Initial configuration in section 3.
Replacement Procedures 4-46 Satellite P10 0 Main tenance Manual (960 -Q02) Installing the system board The following describes the procedure for inst alling the system board (See Figure 4-26). 1. Secure the system board with the following screws . • M2.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-47 4.18 CPU Removing the CPU heat sink The following describes the procedure for rem o ving the CPU heat sink (See Figure 4-27 ). 1. Disconnect the Heat sink cable from the connector CN20 on the system board 2.
Replacement Procedures 4-48 Satellite P10 0 Main tenance Manual (960 -Q02) 4. Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the counterclockwise with a flat-blade screwdriver.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-49 NOTE: Apply the silicon grease enough to cove r the chip surface using the special applicator. Figure 4-29 Applying silicon grease 5. Install the CPU heat sink and heat sink holder and secure them with the f ollowing screws along 1 to 5.
Replacement Procedures 4-50 Satellite P10 0 Main tenance Manual (960 -Q02) 4.19 VGA heat sink Removing the VGA heat sink The following describes the procedure for removing the VGA heat sink (See Figure 4-30). 1. Remove the following screws securing the VGA heat sink along 1 to 5.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-51 Installing the VGA heat sink The following describes the procedure for in stalling the VGA heat sink (See Figure 4-30). 1. Install the VGA heat sink . NOTE: For details on applying the silicon grease, refer to Installing the CPU.
Replacement Procedures 4-52 Satellite P10 0 Main tenance Manual (960 -Q02) 4.20 LCD unit / FL inverter CAUTION: When replacing a LCD, it is required th at SVP parameter is set. Update with the latest EC/KBC as described in Appendix H “EC/KBC Rewrite Procedures”.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-53 4. Pull out one insulator and peel off the other one adhered to the FL inverter. 5. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter. 6. Disconnect the HV harnesses from the connectors CN2 on the FL inverter.
Replacement Procedures 4-54 Satellite P10 0 Main tenance Manual (960 -Q02) 8. Remove the following screws securing the LCD unit. • M2.5x4.0 BINK HEAD screw x6 9. With the bottom edge of the LCD unit on the display cover, lift onl y the top edge of the LCD unit.
Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-55 11. Remove the following screws securing the LCD support (LCD unit side) and remove the LCD supports from the LCD unit. • M2.0x3.0 BINK screw x4 Figure 4-34 Removing the LCD supports M2.
Replacement Procedures 4-56 Satellite P10 0 Main tenance Manual (960 -Q02) Installing the LCD unit/FL Inverter The following describes the procedure for inst alling the LCD unit and FL inverter (See Figure 4-31 to 4-34). 1. Install the LCD supports (LCD unit side) to the LCD and secure them with the following screws .
Satellite P100 Maintenance Manu al(960-Q02) App-i Appendices.
App-ii Satellite P100 Ma intenance Manua l(960-Q02).
QOSMIO G10 Maintenance Manual (960-497) App-iii Appendix Contents Appendix A Handling the LCD M odule .......................................................................... A-1 Appendix B Boar d Layout .............................................
App-iv Satellite P100 Maintenance Manua l(960-Q02) C.15 CN15 USB Port-1 .......................................................................................... 10 C.16 CN16 USB Port-2 ................................................................
QOSMIO G10 Maint e na nce Manual (960- 4 97 ) App-v E 9 French (FR) Keyboard ................................................................................. E-5 E 10 Hungary(HU) Keyboard ..............................................................
App-vi Satellite P100 Maintenance Manua l(960-Q02) Appendix F Wiring Diagrams ......................................................................................... F-1 F.1 RGB Monitor ID W raparound Connector ......................................
Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) A-1 Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1.
Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with co tton or a soft cloth. If it is still dirty, try breathing on the surface to create a light cond ensate and wipe it again. If the surface is very dirty, we recomme nd a CRT cleaning agent.
Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge.
Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Handling the LCD Module 10. If you transport the module, do not use pack ing material that c ontains epoxy resin (amine) or silicon glue (alcohol or oxide).
Handling the LCD Module A-6 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Satellite P100 Maintenanc e Manua l (960-Q02) B-1 Appendix B Appendix B Board Layout B.1 System Board Figure B-1 System board layout (front).
Board Layout Figure B-2 System board layout (Back) B-2 Satellite P100 Mainten ance Manual(96 0-Q02).
Board Layout Table B-1-1 System board ICs and connectors Satellite L20 Main tenance Manu al(960-Q01) B-3.
Board Layout B.2 Function Button board <Front layout> <Back layout> Figure B-3 Function Button board layout Table B-2 Function Button board connectors B-4 Satellite P100 Mainten ance Manua.
Board Layout B.3 Modem board <Front layout> <Back layout> Figure B-3 Modem board layout Table B-3 Modem board connectors Satellite L20 Main tenance Manu al(960-Q01) B-5.
Board Layout B.4 Touch Pad Board <Front layout> <Back layout> Figure B-4 Touch pad board layout Table B-4 Touch pad board connectors B-6 Satellite P100 Mainten ance Manual(96 0-Q02).
Board Layout B.5 Audio Board <Front layout> <Back layout> Figure B-5 Audio board layout Satellite L20 Main tenance Manu al(960-Q01) B-7.
Board Layout Table B-5 Audio board connectors B-8 Satellite P100 Mainten ance Manual(96 0-Q02).
Board Layout B.6 VGA Board <Front layout> Figure B-6-4 VGA board layout (front) Satellite L20 Main tenance Manu al(960-Q01) B-9.
Board Layout <Back layout> Figure B-6-2 VGA board layout (back) Table B-6 VGA board connectors B-10 Satellite P100 Mainten ance Manual(96 0-Q02).
Board Layout B.7 Fingerprint Board <Front layout> <Back layout> Figure B-7 Fingerprint board layout Table B-7 Fingerprint board connectors Satellite L20 Main tenance Manu al(960-Q01) B-11.
Board Layout B.8 USB Board <Front layout> <Back layout> Figure B-8 USB board layout Table B-8 USB board connectors B-12 Satellite P100 Mainten ance Manual(96 0-Q02).
Satellite L10 Maintenance Manu al(960-Q01) 1 Appendix C Pin Assignment CN1 Bluetooth Connector CONN SMD FFC 20P 1R FR (P0.5, H2.0) PIN No. Sig nal name I/O PIN No.
Pin Assignm e nt 2 Satellite P100 Mainten ance Manual(960-Q0 2) 7 LVDS_TXL#2 I 8 LVDS_TXL2 I 9 GND --- 10 LVDS_TXL#1 I 11 LVDS_TXL1 I 12 GND --- 13 LVDS_TXL#0 I 14 LVDS_TXL0 I 15 GND --- 16 LVDS_TXLCK.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 3 PIN No. Signal name I/O PIN No. Signal name I/O 1 NBSWON# O 2 BT1# O 3 BT2# O 4 BT3# O 5 BT4# O 6 BT_IE# O 7 BT_WWW# O 8 CAPSLED I 9 NUMLED.
Pin Assignm e nt 4 Satellite P100 Mainten ance Manual(960-Q0 2) CN5 Finger Print Board Connector CONN SMD HOUSING 6P 1R FR (P1.25, H1.85) EP PIN No. Signal na me I/O PIN No. Signal na me I/O 1 +3VSUS --- 2 +3VSUS --- 3 BUSBP+ I/O 4 BUSBP- I/O 5 GND --- 6 GND --- CN6 Internal K/B Connector CONN SMD FPC 26P 1R FR (P1.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 5 CN7 Touchpad Board Connector CONN SMD FFC 6P 1R FR (P1.0, H1.95) PIN No. Signal na me I/O PIN No. Signal na me I/O 1 +5V_TP --- 2 +5V_TP --- 3 TPDATA I/O 4 TPCLK I/O 5 GND --- 6 GND --- CN8 RTC Battery Connector CONN SMD HEADER 2P MS (P1.
Pin Assignm e nt 6 Satellite P100 Mainten ance Manual(960-Q0 2) 11 A_CAD14 I/O 12 A_CC/BE1# O 13 A_CPAR I/O 14 A_CPERR# O 15 A_CGNT# I 16 A_CINT# O 17 A_VCC --- 18 AVPP --- 19 A_CCLK I 20 A_CIRDY# O 2.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 7 59 A_CSERR# I 60 A_CREQ# I 61 A_CC/BE3# O 62 A_CAUDIO I 63 A_CSTSCHG I 64 A_CAD28 I/O 65 A_CAD30 I/O 66 A_CAD31 I/O 67 A_CCD2# I/O 68 GND --- CN10 Speaker Connector CONN SMD HD 4P 1R MR (P1.
Pin Assignm e nt 8 Satellite P100 Mainten ance Manual(960-Q0 2) CONN DIP D-SUB 15P 2R FR (P0.76) L-F PIN No. Signal na me I/O PIN No. Signal name I/O 1 CRT_R I 2 CRT_G I 3 CRT_B I 4 NC --- 5 GND --- 6.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 9 17 DVI_TX0- I 18 DVI_TX0+ I 19 GND --- 20 NC --- 21 NC --- 22 GND --- 23 DVI_CLK+ I 24 DVI_CLK- I 25 GND --- 26 GND --- 27 NC --- 28 NC --- CN14 RJ11/RJ45 Connector CONN RJ11/RJ45 14P2R FR (L: G, R: Y, H10.
Pin Assignm e nt 10 Satellite P100 Mainten ance Manual(960-Q0 2) PIN No. Signal name I/O PI N No. Signal name I/O 1 USBPOWER --- 2 USBP- I/O 3 USBP+ I/O 4 GND --- 5 GND --- 6 GND --- 7 GND --- 8 GND --- CN16 USB Port-2 CONN DIP (USB) 4P 1R MR (L=13.60, H5.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 11 CONN SMD HEADER 2P 1R MR (P1.25, H1.95) PIN No. Signal na me I/O PIN No. Signal na me I/O 1 TIPL --- 2 RINGL --- CN19 HDD Connector CONN DIP HS 22P 1R FR (P1.27, H13.99) PIN No. Signal name I/O PI N No.
Pin Assignm e nt 12 Satellite P100 Mainten ance Manual(960-Q0 2) 1 GND --- 2 GND --- 3 VA --- 4 VA --- CN22 VGA Power Connector CONN SMD HEADER 10P MS (P1.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 13 15 GND --- 16 SM_DQ6 I/O 17 SM_DQ2 I/O 18 GND --- 19 SM_DQ3 I/O 20 SM_DQ13 I/O 21 GND --- 22 SM_DQ14 I/O 23 SM_DQ12 I/O 24 GND --- 25 SM_D.
Pin Assignm e nt 14 Satellite P100 Mainten ance Manual(960-Q0 2) 63 SM_DQ25 I/O 64 SM_DQ28 I/O 65 GND --- 66 GND --- 67 SMA_DM3 I 68 SM_DQS#3 I/O 69 NC --- 70 SM_DQS3 I/O 71 GND --- 72 GND --- 73 SM_DQ26 I/O 74 SM_DQ30 I/O 75 SM_DQ27 I/O 76 SM_DQ31 I/O 77 GND --- 78 GND --- 79 M_CKE0 I 80 M_CKE1 I 81 +1.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 15 111 +1.8VSUS --- 112 +1.8VSUS --- 113 SM_CAS# I 114 M_ODT0 I 115 M_CS#1 I 116 SM_MA13 I/O 117 +1.
Pin Assignm e nt 16 Satellite P100 Mainten ance Manual(960-Q0 2) 159 SM_DQ49 I/O 160 SM_DQ53 I/O 161 GND --- 162 GND --- 163 NC --- 164 SM_CLK1 I 165 GND --- 166 SM_CLK#1 I 167 SM_DQS#6 I/O 168 GND --.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 17 IC SKT DDRII SO-DIMM (200P, H8.0MM, 1.8V) PIN No. Signal na me I/O PIN No. Signal nam e I/O 1 SM_VREF_DIMM --- 2 GND --- 3 GND --- 4 SM_DQ.
Pin Assignm e nt 18 Satellite P100 Mainten ance Manual(960-Q0 2) 45 SM_DQ17 I/O 46 SM_DQ16 I/O 47 GND --- 48 GND --- 49 SM_DQS#2 I/O 50 PM_EXTTS#0 O 51 SM_DQS2 I/O 52 SM_DM2 I 53 GND --- 54 GND --- 55.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 19 93 SM_MA8 I/O 94 SM_MA6 I/O 95 +1.8VSUS --- 96 +1.8VSUS --- 97 SM_MA5 I/O 98 SM_MA4 I/O 99 SM_MA3 I/O 100 SM_MA2 I/O 101 SM_MA1 I/O 102 SM_MA0 I/O 103 +1.8VSUS --- 104 +1.8VSUS --- 105 SM_MA10 I/O 106 SM_BS1 I 107 SM_BS0 I 108 SM_RAS# I 109 SM_WE# I 110 M_CS#0 I 111 +1.
Pin Assignm e nt 20 Satellite P100 Mainten ance Manual(960-Q0 2) 141 SM_DQ40 I/O 142 SM_DQ45 I/O 143 SM_DQ41 I/O 144 GND --- 145 GND --- 146 SM_DQS#5 I/O 147 SM_DM5 I 148 SM_DQS5 I/O 149 GND --- 150 G.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 21 189 SM_DQ62 I/O 190 GND --- 191 SM_DQ58 I/O 192 SM_DQ59 I/O 193 GND --- 194 SM_DQ63 I/O 195 CGDAT_SMB I/O 196 GND --- 197 CGCLK_SMB I/O 198 SA0 --- 199 +3V --- 200 SA1 --- CN25 1394 Port CONN DIP (1394) 4P 2R FR(P1.
Pin Assignm e nt 22 Satellite P100 Mainten ance Manual(960-Q0 2) 9 PDD6 I/O 10 PDD10 I/O 11 PDD5 I/O 12 PDD11 I/O 13 PDD4 I/O 14 PDD12 I/O 15 PDD3 I/O 16 PDD13 I/O 17 PDD2 I/O 18 PDD14 I/O 19 PDD1 I/O.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 23 CN27 VGA Interface Connector CONN SMD HS 180P FR (P0.5, H4.15) EP PIN No. Signal name I/O PI N No.
Pin Assignm e nt 24 Satellite P100 Mainten ance Manual(960-Q0 2) 43 PEG_TXP7 I/O 44 PEG_RXP7 I/O 45 PEG_TXN7 I/O 46 PEG_R XN7 I/O 47 GND --- 48 GND --- 49 PEG_TXP8 I/O 50 PEG_RXP8 I/O 51 PEG_TXN8 I/O .
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 25 91 PEG_TXP15 I/O 92 PEG_RXP15 I/O 93 PEG_TXN15 I/O 94 PEG_RXN15 I/O 95 GND --- 96 GND --- 97 27M_VGA I 98 PECLK_ VGA I 99 27MSS_VGA I 100 .
Pin Assignm e nt 26 Satellite P100 Mainten ance Manual(960-Q0 2) 139 NC --- 140 +2.5V --- 141 EXT_TV_Y/G O 142 +2.5V --- 143 EXT_TV_C/R O 144 GND --- 145 GND --- 146 GND --- 147 EXT_DVI_TX2+ O 148 EXT.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 27 CN28 Modem Board Connector CONN SMD HEADER 12P, 2R, MS (P0.8, H2.4) PIN No. Signal name I/O PI N No.
Pin Assignm e nt 28 Satellite P100 Mainten ance Manual(960-Q0 2) 11 WAKW# --- 12 +NEW_3VAUX --- 13 PERST# O 14 +NEW_3V --- 15 +NEW_3V --- 16 NEW_CLKREQ# O 17 CPPE# O 18 PECLK_NEW# I 19 PECLK_NEW I 20 .
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 29 19 NC --- 20 RF_EN I 21 GND --- 22 PLTRST# I 23 PCIE_RXN O 24 +3VSUS --- 25 PCIE_RXP O 26 GND --- 27 GND --- 28 +1.
Pin Assignm e nt 30 Satellite P100 Mainten ance Manual(960-Q0 2) 3 MSD1_SDD1_SMD1 I/O 4 MSD0_SDD0_SMD0 I/O 5 MSD2_SDD2_SMD2 I/O 6 MS_CD# O 7 MSD3_SDD3_SMD3 I/O 8 MSCK_SDCK_SM WP# I 9 VCC_FM --- 10 GND.
Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 31 CONN SMD FFC 20P 1R FR (P0.5, H2.0) PIN No. Signal name I/O PI N No. Signal name I/O 1 SPKL O 2 SPKR O 3 PORT_B_L O 4 PORT_B_R O 5 MIC_R O.
Pin Assignm e nt 32 Satellite P100 Mainten ance Manual(960-Q0 2) 3 NC --- 4 TEMP_MBAT O 5 DATA I/O 6 CLK O 7 GND ---.
Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) D-1 Appendix. D Appendix D Display Codes D.1 Display Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code s et 2 Cap No.
Display codes D-2 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code s et 2 Cap No. Ke ytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 .
Display codes Satellite L20 Main tenance Manu al (960-497) D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 6.
Display codes D-4 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3.
Display codes Satellite L20 Main tenance Manu al (960-497) D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 1.
Display codes D-6 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E.
Display codes Satellite L20 Main tenance Manu al (960-497) D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7.
Display codes D-8 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co m mo n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.
Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) E-1 Appendix E Key Layout Appendix E Keyboard Layout E.1 United States (US) Keyboard Figure E-1 US Keyboard layout E.
Keyboard Layout E.3 Arabia (AR) Ke yboard Figure E-3 AR Keyboard layout E.4 Belgium (BB) Keyboard Figure E-4 BB Keyboard layout E-2 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Keyboard Layout Appendices E.5 Czech (CZ) Keyboard FigureE-5 CZ Keyboard layout E.6 German (GR) Keyboard Figure E-6 GR Keyboard layout Satellite Denver Maintenance Manual(P100) E-3.
Keyboard Layout E.7 Danish (DK) Ke yboard Figure E-7 DK Keyboard layout E.8 Spanis h (SP) Ke yboard Figure E-8 SP Keyboard layout E-4 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Keyboard Layout Appendices E.9 French (FR) Keyboard Figure E-9 FR Keyboard layout E.10 Hungar y(HU) Keyboard Figure E-10 HUR Keyboard layout Satellite Denver Maintenance Manual(P100) E-5.
Keyboard Layout E.11 Italian (IT) Keyboard Figure E-11 IT Keyboard layout E.12 Korean (KR) Keyboard Figure E-12 KR Keyboard layout E-6 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Keyboard Layout Appendices E.13 Norwegian (NO) Keyboard Figure E-13 NO Keyboard layout E.14 Portuguese (PT) Keyboard Figure E-14 PT Keyboard layout Satellite Denver Maintenance Manual(P100) E-7.
Keyboard Layout E.15 Traditional Chinese (TC) Keyboard Figure E-15 TC Keyboard layout E.16 Swedish (SW) Keyboard Figure E-16 SW Keyboard layout E-8 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Keyboard Layout Appendices E.17 Russian (RU) Keyboard Figure E-17 RU Keyboard layout E.18 Turkish (TR) Keyboard Figure E-18 TR Keyboard layout Satellite Denver Maintenance Manual(P100) E-9.
Keyboard Layout E.19 Japanese (JP) Keyboard Figure E-19 JP Keyboard layout E.20 Swiss-German(SL) Keyboard Figure E-20 SL Keyboard layout E-10 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Keyboard Layout Appendices E.21 Hebrew Keyboard Figure E-21 Keyboard layout E.22 Greek Keyboard Figure E-22 GK Keyboard layout Satellite Denver Maintenance Manual(P100) E-11.
Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) F-1 Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector (1) RED (2) GREEN (3) BLUE (4) NC (5) GND (6) GND (7) GND (8) GND (9.
Wiring Diagrams F-2 Satellite P100 Maintenance M a nual( 960-Q0 2 ).
Satellite P100 Maintenan ce Manual(960-Q02) G-1 Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool: BIOS/EC/KBC rewriting disk USB doggle Rewriting the BIOS 1.
Satellite P100 Maintenan ce Manual(960-Q02) H-1 Appendix H Appendix H EC/KBC Rewrite Procedures Same as BIOS rewrite Procedures, please refer appendix G.
Satellite P100 Maintenance Manu al(96 0-Q02) I-1 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures ) in maximum configuration.
Reliability I-2 Satellite L10 Maintenance Manual(960-Q0 1).
Een belangrijk punt na aankoop van elk apparaat Toshiba satellite p100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba satellite p100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba satellite p100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba satellite p100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba satellite p100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba satellite p100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba satellite p100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba satellite p100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
