Gebruiksaanwijzing /service van het product ST-A10 van de fabrikant Toshiba
Ga naar pagina of 24
TOSHIBA POS Terminal ST-A10 SERIES Owner's Manual.
CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. WARNING This is a Class A product. In a domestic environment this product may cause radi o interference in which case the user may be required to take adequate measures.
Safety Summary SPTM-0009 (i) Safety Summary Personal safety in handling or maintaining the equipmen t is extrem ely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and underst ood before handling or maintaining the equipm ent.
Safety Summary SPTM-0009 (ii) If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance.
SPTM-0009 TABLE OF CONTENTS Page 1. INTRODUCT ION ----------------------------------------------------------- 1-1 1.1 Accessories -------------------------------------------------------------------------------- 1-1 2. APPEARANCE ------------------------------------------------------------- 2-1 2.
1. INTRODUCTION 1.1 Accessories 1-1 SPTM-0009 1. INTRODUCTION Thank you for choosing the TOSHIBA POS Terminal. This POS terminal contains all the high performance register functions necessary for a specialty/hospitality POS terminal and enables the user oriented system configuration.
2. APPEARANCE 2. 1 Standard Model 2-1 SPTM-0009 2. APPEARANCE 2.1 Standard Model 12-inch display POS terminal 12-inch display POS terminal 15-inch display POS terminal.
2. APPEARANCE 2. 1 Standard Model 2-2 SPTM-0009 LED and CONTROL BUTTON DESCRIPTION Power LED (Blue) This is the LED to indicate the power ON/OFF status of the POS terminal. The blue LED is illuminated when the power is ON. HDD LED (Yellow) The yellow LED is illuminated during the access to the hard disk drive.
2. APPEARANCE 2. 2 Available Options 2-3 SPTM-0009 2.2 Available Options Wireless Adaptor Case Fixed type customer display BIU Magnetic Card Reader (MCR) Tilt type customer display BIU i Button Remote.
2. APPEARANCE 2.3 Examples of POS Terminal with Some Options 2-4 SPTM-0009 2.3 Examples of POS Terminal with Some Options.
2. APPEARANCE 2.4 Connectors 2-5 SPTM-0009 2.4 Connectors CAUTION! The drawer interface connector is exclu sively for connecting the drawer. Do not connect a phone line or any other cables than the drawer cable to t his connector. Doing so may cause a failure of the phone line and this terminal.
2. APPEARANCE 2.4 Connectors 2-6 SPTM-0009 Connector Description AC inlet A connector for the AC inlet PS/2 (Mouse, Keyboard) Mini-DIN 6- pin female type connector Connector for the PS/2 type mouse, Connector for the PS/2 type keyboard USB: General 5V USB X 6 USB: 24V Powered X 1 Connector for the USB (Universal Serial Bus) interface USB V2.
3. INSTALLATION PROCEDURE 3.1 Envir onment for Installation 3-1 SPTM-0009 3. INSTALLATION PROCEDURE WARNING! Care must be taken not to get your fingers caught between the LCD Frame and the POS term inal when bending the display downward. CAUTION! When removing the protective film from the display surface, please be sure to do it slowly.
3. INSTALLATION PROCEDURE 3.2 Connecti ng the AC Plug 3-2 SPTM-0009 3.2 Connecting the AC Plug 1. Push on both sides of the molded Tower (TWR) Tail Cover to remove it from the system in order to gain access of the AC inlet. 2. Fully insert the Power Cord Plug into the Inlet of the POS terminal.
4. ADJUSTMENT 4.1 Tilt Angle Adjustment 4-1 SPTM-0009 4. ADJUSTMENT Tilt angle and brightness of the operator’s display can be adjusted. Adjustment method is common to both of 12-inch display model and 15-inch display model. CAUTION! 1. Do not adjust the display angle by holding the LCD panel.
4. ADJUSTMENT 4.2 Brightness Adjustment 4-2 SPTM-0009 4.2 Brightness Adjustment The brightness control is provided on the lower right of the operator’s display. Turning it to the left makes the display darker, and turning it to the right makes the display brighter.
5. MAGNETIC CARD READER (OPTION) 5.1 How to Read Magnetic Card 5-1 SPTM-0009 5. MAGNETIC CARD READER (OPTION) The optional magnetic card reader can be installed. 5.1 How to Read Magnetic Card Insert the magnetic card into the upper portion of the magnetic card reader slot and slowly move the card downward.
6. i Button® (OPTION) 6.1 How to Read iButton 6-1 SPTM-0009 6. i Button ® (OPTION) The optional i Button unit can be installed on the bottom of the LCD. 6.1 How to Read i Button CAUTION! 1. Keep storage media, like a floppy disk, away from the touch probe.
7. GENERAL MAINTENANCE 7. GENERAL MAINTENANCE 7-1 SPTM-0009 7. GENERAL MAINTENANCE WARNING! 1. Be sure to disconnect the power cord prior to performing any maintenance. 2. Do not pour water directly on or wipe the operator’s display with a soaked cloth, as this may cause fire, electric shock, or machine failure .
8. TROUBLESHOOTING 8. TROUBLESHOOTING 8-1 SPTM-0009 8. TROUBLESHOOTING WARNING! If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself.
9. SPECIFICATIONS 9.1 Basic Specifications 9-1 SPTM-0009 9. SPECIFICATIONS 9.1 Basic Specifications Item Description CPU VIA C7 1.5GHz Memory 512 MB, 2 slots (2 GB max) HDD 3.5" HDD SATA (40 GB) MCR ISO-3-track one sided type (option) i Button Reader Option RS-232C 4 (2x normal.
9. SPECIFICATIONS 9.2 Options 9-2 SPTM-0009 9.2 Options Option Model Description DRWST-51A-4MVK-QM-R DRWST-51A-8MVK-QM-R 24V-drive standard drawer Dimensions and Weight: 460(W) x 400(D) x 115(H) mm / 18.
English Waste Recycling information for users: Following information is only for EU-member states: The crossed out wheeled bin symbol is used to indicate t hat the product must not be tr eated as general household w aste.
E PRINTED IN SINGAPOLE SPTM-0009.
Een belangrijk punt na aankoop van elk apparaat Toshiba ST-A10 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Toshiba ST-A10 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Toshiba ST-A10 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Toshiba ST-A10 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Toshiba ST-A10 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Toshiba ST-A10 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Toshiba ST-A10 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Toshiba ST-A10 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
