Gebruiksaanwijzing /service van het product 8985 van de fabrikant Uniden
Ga naar pagina of 62
EXAI 8985 HEN 99.8.20 0:12 PM Page 1.
Thank you for choosing the Uniden EXAI 8985 cordless telephone. This phone is designed to exacting standards that provide reliability, long life and outstanding performance. Note: Some illustrations in this manual may differ fr om the actual unit for explanation purposes.
talk flash del mem call id abc def jkl ghi mno tuv pqrs oper tone wxyz 2 13 5 46 8 79 0 redial/p select/ch int'com mute/ring extended range vol RING TIME REC TIME 2/4/TS ANN/4/1 DIGIT AL 900MHz s.
RING TIME REC TIME 2/4/TS ANN/4/1 38 44 45 46 47 42 43 41 48 49 39 40 50 51 52 53 1. Handset antenna 2. Headset cover 3. Handset battery compartment 4. Handset ring switch 5. Handset speaker 6. LCD display 7. T alk key 8. V olume/Cursor down/ character select key 9.
Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Read this first ..........................................................3 Step 1: Checking the package contents ........
3 This cordless telephone must be set up before use. Follow these steps; Step 1 (page 4) Unpack the telephone and accessories. Step 2 (page 5 to 9) Next, choose the best location to set up the base unit. Base unit Step 3 (page 10 to11) Then, insert the battery pack into the handset.
4 Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department (see below).
5 Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS brochure.
6 Connect the base unit If you want to install the base unit on the wall, see page 8. T o AC outlet T o telephone outlet T o TEL LINE T o DC IN 9V AC adapter (supplied) T elephone line cord (supplied) 1 2 Route the cord. Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
7 Use only the supplied AD-420 AC adapter . Do not use any other AC adapter . Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. If your telephone outlet isn't modular , contact your telephone company for assistance.
8 Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack. 3 Plug the telephone line cord into the telephone outlet.
9 Direct wall plate mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • A void electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.
10 Charge the battery pack for more than 12-15 hours before you start using your phone. 1 Remove the battery cover . 2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.
11 Battery use time (per charge) From fully charged • Seven hours coutinuous use. • Seven days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power .
12 There are three Caller ID options, Auto T alk, CIDCW (Caller ID with Call W aiting), and Area Code. 1 In the standby mode, hold down for 2 seconds until the Caller ID setting appears. 2 Press or to move the cursor to the item that is to be set. Example: T o select CIDCW 3 For Auto T alk and CIDCW press to toggle between on and off.
13 1 When the phone is in the standby mode, press and hold until the Caller ID setting screen appears. 2 Press to select “ Area Code ”. 3 Press . 4 Use the dial buttons ( to ) to enter the 3-digit area code.
14 From the handset Handset on the base 1 Pick up handset. 2 Press . 3 Dial the phone number . 4 T o hang up, press or return the handset to the base. Handset of f the base 1 Press . 2 Dial the phone number . 3 T o hang up, press or return the handset to the base.
15 1 Phone rings. Calling appears on the display. 2 Press if not in Auto T alk mode. Press any key other than mute key if in Auto Talk mode. “ Talk ” appears flashing on the display. Then the earpiece ear volume is displayed for 2 seconds. 3 The call-time display starts when you begin to talk.
16 Mute Y ou can tur n off the base or the handset microphone so that the person you are talking with cannot hear you. When speaking with the base 1 Press during a telephone call. The mocrophone is turned off. 2 T o cancel mute, press , or . mute speaker mute speaker talk 1 Press during a telephone call.
17 Adjusting the ringer and earpiece volume Handset ringer tone In the standby mode, press . Each time is pressed, the ringer tone setting changes and the selected ringer tone sounds for 2 seconds. Handset ringer switch This switch turns the handset ringer on or off.
18 From the handset The last three phone numbers entered can be quickly redialed. If the recently dialed number exceeds 32 digits, only the first 32 digits are retained for redialing. Redialing a call [On-hook redialing] 1 Press . The phone number that was last dialed appears on the display.
19 From the base 1 Press . 2 T o call the last number dialed from the base, press . 3 Press to finish the call. redial/p speaker speaker Of f-hook redialing 1 Press . “ Talk ” appears flashing on the display. 2 Press . The last number dialed will be displayed.
20 Y ou may use the phone as speaker phone to answer calls pressing the button on the base. T o hung up, press again. The base microphone is located under the phone. Position yourself approximately 12 inches away from the base and speaker clearly. speaker 12" Using the speaker phone speaker EXAI 8985 HEN 99.
21 Intercom fr om the base to handset 1 Press on the base. The handset beeps. 2 Press or on the handset. Speak into the mouthpiece to answer the base. 3 T o turn off the intercom, press on the handset or on the base. page/int'com int'com talk speaker Intercom fr om the handset to base 1 Press on the handset.
22 T o transfer fr om the handset to the base 1 Press on the handset while speaking on the handset. The line will be held, and the inter’com tone will be sounded on the base. 2 Press or on the base. The intercom mode is activated and the line is held.
23 Y our EXAI 8985 stores up to 20 name/numbers in handset plus 10 numbers in the base. On the handeset 1 Press and hold until “ Memory Store ” is displayed.
24 4 Use the , , , , or keys to enter the name. The name cannot exceed 13 characters. • Use the and key to scroll through the character menu. It contains upper and lower case letters, numbers, punctuation marks and various characters. • Use and to move the cursor to the desired location.
25 Y ou can store only numbers in the handset 1 Press . The status LED blinks. 2 Dial the number you wish to store. 3 Press . Enter the memory location number (0-9) on the keypad. The status LED goes out. A confirmation beep indicates the number is stored.
26 T o exit the memory function without dialing, press . The handset returns to standby . If you press before , you can confirm the name and number stored in the selected memory location. From the handset Making calls with memory dialing [On-hook dialing] 1 Press .
27 Of f-hook dialing 1 Press . “ Talk ” flashes and the volume setting appears. 2 Press . 3 Press the number keypad to select the memory location (01 - 20) of the desired phone number . The selected phone number is displayed. Then the number is dialed.
28 From the base 1 Press . 2 Press . 3 Press the number keypad to select the memory location you wish to dial. 4 Press to finish the call. speaker memory speaker Editing a stored name and/or phone number 1 Press and hold for 2 seconds. The display shows the memory screen and any saved name/number .
29 4 Press the or key to select “ Edit Memory ”, then press . The following screen appears. The cursor flashes indicating that the display is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line .
30 4 Press to move the cursor down to “ Delete Memory ” command line. 5 Press . The following confirmation screen appears. 6 Press to move the cursor to “ Yes ”. 7 Press or . There is a confirmation tone and the entry is deleted. The following screen appears.
31 1 Press . The status LED blinks. 2 Press again. 3 Enter the memory location number (0-9) of the number you wish to delete. The status LED goes out. A confirmation beep indicates the number has been erased. memory memory status LED 8 After 2 seconds the display returns to the “ Memory Store ” screen.
32 The Uniden EXAI 8985 permits 3-way conversations between the handset, base, and outside line. When speaking on the handset 1 Press on the base to join the 3-way conversation. This will set the 3-way conversation mode. 2 Press on the base to hang up.
33 Caller ID service CALLER ID FEA TURES Y ou must subscribe to the Caller ID service from your telephone company to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone.
34 1 When the Caller ID message is received, the status LED blinks. The display shows the caller’s phone number , along with the date and time. The incoming call information is stored in Caller ID record. If the Caller ID service includes the caller’s name, the caller's name appears on the display (up to 15 letters).
35 Press to return to the summary screen. The Caller ID list stores information for up to 50 incoming calls - even unanswered calls. Viewing the Caller ID Message list If a call comes in via a telephone system that does not offer Caller ID service, no information is stored.
36 The EXAI 8985 stores up to 50 messages. If more new calls are received, messages stored in the list are deleted beginning with the oldest message in the list. Caller ID data can also be deleted manually. Deleting a Caller ID message Deleting information from the Caller ID list 1 Press .
37 Deleting all Caller ID name/numbers 1 Press . 2 Press . 3 Press or to select “ Yes ” or “ No ”. 4 Press or . When the pointer is at “ Yes ” : A beep tone sounds and all stored Caller ID messages are deleted. When the pointer is at “ No ” : The display returns to the summary screen.
38 When a long distance call has been set, “ 1 ” appears in the display . Y ou cannot make a call from the Caller ID list if your EXAI 8985 is connected to private branch exchange (PBX). Dial edit Y ou can edit the phone number of Caller ID data when you press after the step 1.
39 Storing Caller ID messages in Memory dialing Messages shown in the Caller ID list can be stored in memory dialing. Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory dialing.
40 Using "Caller ID with call waiting" service “Caller ID” and “Call waiting” are separate services. CIDCW (Caller ID on Call W aiting) per for ms the same as regular Caller ID on a call waiting number .
41 The EXAI 8985 has a built-in answering system that answers and records incoming calls. Y ou can also use your answering system to record a conversation, leave a voice memo message for others who use the phone, or to announce a special message to callers when you're away from your phone.
42 4 Press or until you hear the correct time setting. Numbers 1 through 59 display on the base as each minute is announced. Press again to select the correct time. 5 The LED displays an A or P . Press or until you hear the correct AM/PM setting. 6 Press again to end the time/day setting.
43 1 Press and hold until you hear a long tone. Start recording your message immediately after you hear the long tone end. 2 When you finish recording your message, press or . A long tone sounds and your message plays back on the phone. Preset Message The following message is prerecorded: "Hello, no one is available to take your call.
44 Selecting the message recor d time Y ou can set your answering system to record messages up to one or four minutes long. One minute option: move the REC TIME switch to 1 .
45 Setting ring time switch The ring time /toll saver switch allows you to set the number of rings the caller hears before the answering system plays your outgoing message.
46 Playing your message The base LED shows the number of total messages on the display. If the display is blinking, then there are new messages waiting for you. The EXAI 8955 is designed to play your new messages first. After you play your new messages you can then play your old messages.
47 Repeating a message 1 Press to review your message. The number of stored messages is announced. 2 After a message has played for a few seconds, press to repeat the message. 3 Press at any time to stop reviewing messages and return to standby. The message counter LED shows the total number of messages still on the system.
48 Deleting a message Deleting individual message 1 Press to review your message. 2 If you decide to delete a message, press anytime during the message. The system beeps and immediately goes to the next message. 3 After you have played all of your messages, a long tone sounds on the base speaker .
49 Recording a conversation Y ou can record up to 10 minutes of conversation while you are making your call from the handset. 1 During the conversation from the handset. Press and hold on the base. The unit begins recording and the LED blinks. A beep that can be heard by both parties sounds every 15 seconds.
50 Remote access away from home Y ou can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new outgoing message, and to monitor sounds in the room.
51 Remote room monitor Y ou can call your answering system from any touch-tone phone and monitor sounds in the room where your base is installed. 1 Call your telephone number . 2 While the answering machine is activated, press # and your PIN code. 3 The answering system begins announcing the time and day.
52 The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set.
53 T o attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. T o r emove the beltclip Pull both sides of the beltclip to release the tabs from the holes. Y our phone may be used with an optional headset.
54 Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery.
55 If your phone is not performing to your expectations, please try these simple steps first. Symptom The status light won't come on when the handset is placed in the base unit. The audio sounds weak and/or scratchy. Can't make or receive calls.
56 Symptom The caller ID disappears. The caller ID does not display The answering system does not work. Messages are incomplete. After a power failure, the outgoing message is deleted. No sounds on the base unit speaker during call monitoring or message playback.
57 General The EXAI 8985 complies with FCC Parts 15 and 68. Frequency control: PLL Modulation: Frequency shift keying Operating temperature: 0 ° C to +50 ° C (+32 ° F to +122 ° F) Base unit RX frequency: 902.119 MHz to 905.016 MHz (30 channel) TX frequency: 924.
58 0 - 9 3-way conferencing ..............32 A Answering device Features ...........................41 Setting up ........................42 Using ...............................46 B Base ringer switch ................17 Battery pack Preparing and charging.
EXAI 8985 HEN 99.8.20 0:15 PM Page 62.
Een belangrijk punt na aankoop van elk apparaat Uniden 8985 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Uniden 8985 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Uniden 8985 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Uniden 8985 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Uniden 8985 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Uniden 8985 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Uniden 8985 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Uniden 8985 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
