Gebruiksaanwijzing /service van het product CR 3100 van de fabrikant VDO Dayton
Ga naar pagina of 22
Installation Preparation ....................................................................................................................................................................... 2 Mounting ...............................................
GB 3 CONNECTOR A (fig. 2) ■ POWER SUPPL Y CONNECTIONS • Brown wire A8: Connect to an earthing point on the car body . • Red wire A7: Connect to a permanent 12 V supply . This is the main power supply . Ensure this connection can handle a curr ent of 10 A.
4 OTHER CONNECTIONS ■ YELLOW CONNECTOR C1 for Line-output (fig. 4) Y ou can connect a power amplifier with additional loudspeakers to this set: • Black wire: Connect to Front Left (white) and Front Right (red) channel on amplifier . • Black wire: Connect to Rear Left (white) and Rear Right (red) channel on amplifier .
5 GB * Depending on version MET AL SLEEVE Insert metal sleeve into the opening (182 x 53 mm) in the car dashboard or console (fig. 7). See separate installation card. For optimal performance of the CD player*, the metal sleeve should be positioned within the limits shown (between -10° and +30°).
6 For theft protection this set is provided with the following security features: DET ACHABLE FRONT T ake the detachable front with you when leaving the car if not, the set will emit a warning beep 10 seconds after the removal of the ignition key as a reminder .
7 GB ON / OFF • Switch the set on or off. Y ou can use the set even when the car ignition is switched off. See ‘ INST ALLA TION ’ . VOLUME Please make sure you can still hear the traffic (horns, sirens, etc.). • Adjust the volume. Be aware that the volume will automatically increase and decrease if the SDVC connection is made and selected.
8 AUDIO SETTINGS Enter the audio menu. Select the desired audio settings: Bass (Low notes) BASS T reble (High notes) TREBLE Balance (Left-Right) BALANCE Fader (Front-Rear) FADER V olume VOLUME Adjust the selected audio setting. After 5 seconds the display goes back to the normal play mode.
9 GB W A VEBAND Select the menu containing BAND . Select the desired waveband. FM FM MW MW if activated LW SW FM and FM AST cover the same frequencies. The same is true for MW and MW AST . SEARCH TUNING Use search tuning to automatically search for a station.
10 PRESETS Use manually-stored presets for the stations you listen to often. Use automatically-stored presets to quickly find the strongest stations, for example when travelling through different reception areas.
11 GB Many FM stations broadcast RDS information. This set uses the RDS information to offer you many advantages including: DISPLA Y OF ST A TION NAME The set displays the station name instead of its frequency .
12 It is possible to store up to 50 stations in alphabetical order on this set in a separate FM memory . Y ou can then select them by name. LOADING RDS MEMOR Y T o load all the receivable RDS stations of the current reception area into the RDS Memory .
13 GB * Depending on version PLA YBACK Open the front. Slide a cassette with the open side to the right into the cassette opening. Close the front. The display briefly shows TAPE CR if a metal or chromium cassette is inserted. Playback starts. If a cassette is already inserted : • Select cassette as source.
14 F AST REWIND / F AST FORW ARD Select the menu containing FRW and FFW . Activate ✔ / Deactivate FAST REWIND FAST FOR WARD Y ou hear the radio during this operation. CASSETTE EJECT CARE OF CASSETTES - Only use good quality cassettes of 60 or 90 minutes preferably , chrome type cassettes.
15 GB CD PLA YBACK (CD Player) This CD player is suitable for 12 cm discs. Do not use unusually shaped CDs. Open the front. Slide the disc into the slot with the label facing upwards. Close the front. Playback starts. If a disc is already inserted: • Select CD as source.
16 * Depending on version If the display shows: NO MAGAZINE , NO DISCS , D 2 ERROR or CDC NO FRONT . Check that the magazine has been inserted in the CD changer . Check that the magazine has been loaded with discs (at least one). Check that the discs have been inserted the correct way up and that you have not inserted a damaged or dirty disc.
17 GB FURTHER OPTIONS • Select the menu containing COMP and NAME . ■ COMPRESSION • Activate ✔ / Deactivate Compression. This function reduces the volume of the loud sections and increases the volume of the quiet sections. See INITIAL SETTINGS to select the amount of compression.
18 TEMPERA TURE W ARNING Y ou can connect a temperature sensor to this set to give a visible and audible warning automatically when the outside temperature becomes lower than 3 ° C. See ‘ INST ALLA TION ’ then ‘ INITIAL SETTINGS ’ option ‘ TEMP ’ .
19 GB * Depending on version Choose what the display shows; In Radio mode: DISPLA Y OPTIONS DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y DISPLA Y In Cassette* mode: In CD* mode: In CD changer* mode (if connected): During a T elephone Mute (if connected): Current track and track time.
20 It is possible to modify many of the set ’ s initial settings according to your preferences. Enter the Initial Settings menu. Select one of the options you want to modify . Alter the chosen option. - Select the temperature format TEMP [NO, CELSIUS, F AHRENH] (when a temperature sensor is connected).
21 GB * Depending on version - Select the type of confirmation beep. BEEP TYPE [1, 2, 3, 4] Beep is only emitted from the front speakers. - Select the confirmation beep level. BEEP LEVEL [1, 2, 3, 4, 5] - Select the compression level for CD playback* C D COMP [LOW, HIGH] (LOW retains the peaks in the volume, HIGH levels them out).
22 NOTES AND TROUBLESHOOTING ENVIRONMENT This booklet is printed on low-chlorine recyclable paper that can be used for recycling. CHECKS BEFORE REQUESTING SERVICE There may be times when you suspect that your car radio is not functioning as you expect it to.
23 GB * Depending on version Symptoms Possible Cause / Remedy Radio Display shows frequency (not station name). Set is tuned to non-RDS station or RDS is not active, see ‘ INITIAL SETTING ’ option ‘ RDS ’ . Display shows ‘ ALAR M ’ . Emergency announcement is being broadcast.
Een belangrijk punt na aankoop van elk apparaat VDO Dayton CR 3100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen VDO Dayton CR 3100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens VDO Dayton CR 3100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding VDO Dayton CR 3100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over VDO Dayton CR 3100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van VDO Dayton CR 3100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de VDO Dayton CR 3100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met VDO Dayton CR 3100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
