Gebruiksaanwijzing /service van het product N2000 van de fabrikant ViewSonic
Ga naar pagina of 28
N2000 User Guide Full 20.1" Diagonal Vi ewable Screen LCD TV Display.
ViewSonic N2000 i Contents Product Registration ......................................................................................... 1 For Your Records.............................................................................................. 1 Important Product Safety Instructions .
ViewSonic N2000 1 Copyright © ViewSonic Corporation, 2003. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries.
ViewSonic N2000 2 IMPORTANT PRODUCT SAFETY INSTRUCTIONS ATTENTION: Follow and obey all warnings and instructions marked on your product. For your safety, please read all the safety and operating instructions before you operate this product. Keep this user guide for future reference .
ViewSonic N2000 3 ANTENNA INSTALLATION INSTRUCTION 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
ViewSonic N2000 4 Getting Started Congratulations on your purchase of a ViewSonic LCDTV display. Important ! Save the original box and all packing material for future shipping needs.
ViewSonic N2000 5 Front V iew of the Product Use the buttons on the front panel control (or included remote control) to display and adjust the On Screen Display (OSD). The OSD controls are explained at the top of the next page and are defined in “OSD Functions” on page 16.
ViewSonic N2000 6 Rear View of the Product PC A . Audio In (PC) Using cable provided connecting to the Audio out (Green) on your PC B . RGB (VGA input) Using the 15-pin VGA cable provided connecting to the RGB out on your PC AV-1 C . S-Video input Connect the S-Video to external video device such as VCR, DVD and Video game D .
ViewSonic N2000 7 Remote Controls The Remote Control is compatible with the display from up to 5m distances. 1. POWER: Switch the power On/Off 2. SOURCES: Select input sources between RGB >> Component >> AV >> S-Video >> TV 3. TV Source selected to TV mode 4.
ViewSonic N2000 8 Installation 1. Insert Remote Control Batteries 1) Remove the battery cover. 2) Insert the batteries, corresponding to the (+) and ( − ) markings on the battery compartment. 3) Re-attach the battery cover. CAUTION • Only use the specified AAA batteries.
ViewSonic N2000 9 3. Connect AV, Y Pb/Cb Pr/Cr, S-Video, Antenna/Cable to Video Devices Connect Video/Audio cables from compatible devices to the back panel of N2000 LCDTV.
ViewSonic N2000 10 4. Connect power cables Connect the power cord to the N2000 LCDTV then to a properly grounded AC outlet. 5. Turn Power On Press the AC switch button to “I”, then press the Power ON button on the front of the LCDTV display. Or press the Power On (Blue) button on the remote control.
ViewSonic N2000 1 1 OSD Functions All the function settings for your LCDTV display are controlled either via the remote control or using the top control keys on the front panel. To display the OSD main menu, press Menu button on the front control keys or the MENU/EXIT key on the remote control.
ViewSonic N2000 12 Source Input: TV or AV or S-Video Main Picture Menu Function Name Explanation Brightness Adjust the Brightness of TV Contrast Adjust the Contrast of TV Sharpness Adjust the Video Sh.
ViewSonic N2000 13 Multi Screen Menu Both PIP and POP function are disabling it. Figure 1 Multi Input Menu PIP function is enabling it. Figure 2 PIP Menu POP function is enabling it.
ViewSonic N2000 14 Function Name Explanation SUB SCREEN Choose sub screen source, Ö If main screen (input) shown on either TV or A V or S-VIDEO, then sub screen will has input selection on RGB or .
ViewSonic N2000 15 TV Menu Function Name Explanation MTS Selection included Stereo, Sap, Mono, Dual INPUT SIGNAL TV Selection are either Cable or Air (Antenna) AUTO SCAN Channel Auto scan (Right arrow.
ViewSonic N2000 16 Parental Control Menu Access the P ARENT AL CONTROL menu the password must be key-in first (refer to Figure 5), then press OK key to confirm selection. If the wrong password is entered, then refer to Figure 6. Figure 5. Key-In Password Figure 6.
ViewSonic N2000 17 TV Rating Menu Set the TV Ratings to block selected TV channels . MOVIE Rating Menu Set the Movie Ratings to block selected Movie channels.
ViewSonic N2000 18 When parental control is ON and the channels have been blocked, the screen will display the warming message. When the password is incorrect, the screen the screen will display warning message.
ViewSonic N2000 19 Source Input: PC Main Picture Menu Function Name Explanation Brightness Brightness adjustment Contrast Contrast adjustment H-POSITION Adjust Horizontal Position on the image V-POSIT.
ViewSonic N2000 20 Other Information Specifications Panel Type 20.1" (full 20.1" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix VGA LCD, 640RGB*480 vertical stripe Color Anti-reflective coating + Anti-glare coating Viewing angles 160° (H) / 140° (V) Input signal Video RGB Analog * 1 (75 ohms, 0.
ViewSonic N2000 21 Troubleshooting No power • Make sure AC power button is ON, DC power button is ON (Blue LED) • Make sure AC power cord is securely connected to the AC socket • Plug ano.
ViewSonic N2000 22 Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/Region Web site T = Telephone F = FAX Email United States viewsonic.com/support T: (800) 688-6688 F: (909) 468-1202 service.
ViewSonic N2000 23 Limited Warranty VIEWSONIC LCD TV display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period.
ViewSonic N2000 24 Appendix Safety Guidelines Warning: This device must be operated with the original power supply, part number: ADP-60CF A. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded.
ViewSonic N2000 25 Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
V iewSonic Corporation.
Een belangrijk punt na aankoop van elk apparaat ViewSonic N2000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ViewSonic N2000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ViewSonic N2000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ViewSonic N2000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ViewSonic N2000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ViewSonic N2000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ViewSonic N2000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ViewSonic N2000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
