Gebruiksaanwijzing /service van het product WMY 8046 LB2 van de fabrikant Beko
Ga naar pagina of 27
2820524401/ 25-11-14.(10:36) WMY 8046 LB2 W ashing Machine User’ s Manual Document Number.
This product w as manufactured using the la test technology in environmentally friendly conditions..
3 / EN Washing Machine / User’ s Manual 1 General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed.
4 / EN Washing Machine / User’ s Manual u Do not f orget to close the loading door when leaving the room where the product is located. u store all detergents and additives in a safe place awa y from the reach of the children by closing the cover of the detergent container or sealing the detergent package.
5 / EN Washing Machine / User’ s Manual 2 Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
6 / EN Washing Machine / User’ s Manual 4 T echnical specifications Supplier name or trademark Beko Model name WMY 8046 LB2 Rated capacity (kg) 8 Energy efficiency class / Scale from A (Highest Efficiency) to D (Lowest Efficiency) A+++ Maximum spin speed (rpm) 1400 Height (cm) 84 Width (cm) 60 Depth (cm) 60 Net weight (±4 kg.
7 / EN Washing Machine / User’ s Manual 4.1 Installation • Apply to the nearest authorized ser vice agent for the installation of your product. • Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility .
8 / EN Washing Machine / User’ s Manual 4.1.4 Connecting water supply C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly.
9 / EN Washing Machine / User’ s Manual 4.1.6 Adjusting the feet A CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.
10 / EN Washing Machine / User’ s Manual 4.2 Preparation 4.2.1 Sorting the laundry * Sort laundry according to type of fabric, color , and degree of soiling and allowable water temperature. * Always obey the instructions given on the garment tags. 4.
11 / EN Washing Machine / User’ s Manual 4.2.6 Using detergent and softener C When using detergent, softener , starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified.
12 / EN Washing Machine / User’ s Manual If the product does not contain a liquid detergent cup: • Do not use liquid detergent for the prewash in a programme with prewash. • Liquid detergent stains your clothes when used with Delayed Start function.
13 / EN Washing Machine / User’ s Manual 4.2.7 Tips for efficient washing Clothes Light Colours and Whites Colours Black/Dark Colours Delicates/ Woolens/Silks (Recommended temperature range based on.
14 / EN Washing Machine / User’ s Manual 4.3 Operating the product 4.3.1 Control panel 1 - Programme selection knob 2 - T emperature selection LEDs 3 - Spin speed selection LEDs 4 - Duration informa.
15 / EN Washing Machine / User’ s Manual 4.3.2 Programme selection 1 Determine the programme suitable for the type, quantity and soiling level of the laundr y in accordance with the "Programme and consumption table". 1 Select the desired programme with the “Programme Selection” knob.
16 / EN Washing Machine / User’ s Manual Indicative values for Synthetics programmes (EN) Load (kg) W ater Consumption (l) Energy Consumption (kWh) Programme Duration (min) * Remaining Moisture Content (%) ** Remaining Moisture Content (%) ** ≤ 1000 rpm > 1000 rpm Synthetics 60 4 65 1.
17 / EN Washing Machine / User’ s Manual 4.3.6 Programme and consumption table • : Selectable. * : Automatically selected, no canceling. ** : Energ y Label programme (AS/NZS 2040) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed.
18 / EN Washing Machine / User’ s Manual 4.3.7 Auxiliary function selection Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, if a relevant auxiliary function is selected its related indicator light will illuminate.
19 / EN Washing Machine / User’ s Manual 4.3.8 End Time With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End T ime indicator is illuminated.
20 / EN Washing Machine / User’ s Manual 4.3.11.3 Adding or taking out laundry 1. Press the Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash.
21 / EN Washing Machine / User’ s Manual 4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.
22 / EN Washing Machine / User’ s Manual 4.4.3 Cleaning the body and control panel Wipe the body of the machine with soapy water or non-corrosive mild gel detergents as necessar y , and dry with a soft cloth. Use only a soft and damp cloth to clean the control panel.
23 / EN Washing Machine / User’ s Manual If the product does not have an emergency water drain hose, in order to drain the water: a. In order to collect the water to flow out of the filter , place a large vessel in front of the filter . b. T urn and loosen the pump filter until wa ter starts to flow (counterclockwise).
24 / EN Washing Machine / User’ s Manual 5 T roubleshooting Problem Reason Solution Program does not start after closing the door . Start / Pause / Cancel button was not pressed. *Press the Start / Pause / Cancel button. Programme cannot be started or selected.
25 / EN Washing Machine / User’ s Manual Problem Reason Solution Programme time does not countdown. (On models with display) (*) Timer may stop during water intake. Timer indicator will not countdown until the machine takes in adequate amount of water .
26 / EN Washing Machine / User’ s Manual Problem Reason Solution It does not rinse well. The amount, brand and storage conditions of the detergent used are inappropriate.
27 / EN Washing Machine / User’ s Manual Problem Reason Solution (*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
Een belangrijk punt na aankoop van elk apparaat Beko WMY 8046 LB2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Beko WMY 8046 LB2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Beko WMY 8046 LB2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Beko WMY 8046 LB2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Beko WMY 8046 LB2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Beko WMY 8046 LB2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Beko WMY 8046 LB2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Beko WMY 8046 LB2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
