Gebruiksaanwijzing /service van het product XTM 5 Series van de fabrikant WatchGuard Technologies
Ga naar pagina of 21
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 1 of 21 Authorization and Revision History for this document is available in the WatchGuard EC.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 2 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 1.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 3 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.0 Instruction 3.1 -Remove labels Material removed (part Desc or P/N & material type) Instruction visual Labels Cert.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 4 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.2 –Remove back screws holding chassis top to chassis bottom and remove top cover.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 5 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.3 –Depress memory tabs and remove memory.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 6 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.4 – Unplug power supply cables from motherboard, cut all cable ties, remove power supply screws, and remove power supply.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 7 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.5 – Remove screws from the power supply.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 8 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.6 –Remove the top from the power s upply, remove the cable tie and screw inside the power supply, and remo ve fan from the power supply.
Design for Manufacturing and Environment Document WatchGuard Technologies . Doc #480-2535-001 Rev. A Page 9 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.7 – Remove labeling from the top lid and the botto m of the power supply.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 10 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.8 – Disengage heatsink clamps and remo ve heatsink from motherboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 11 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.9 – Pull back clamp and remove battery.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 12 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.10 – Remove fan screws from back of chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 13 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.12 – Cut cable ties for fans, unplug f ans from motherboard, and remove fans.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 14 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.13 – Unscrew screws from heatsink and remove heatsink from motherboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 15 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.14 – Unlatch CPU from mo therboard and remove CPU.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 16 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.15 – Unplug LCD cable from LCD circ uit board and motherboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 17 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.16 – Cut cable tie attaching po wer switch cable to chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 18 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.18 – Remove screws attaching the moth erboard to the chassis and the Cavium card to the chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 19 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.19 – Unplug the Ethernet ports on t he motherboard from the chassis and unplug the Cavium card from the mot herboard.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 20 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.21 – Use a flat-head screwdriver to disengage the power switch assembly from the chassis.
Design for Manufacturing and Environment Document WatchGuard Technol ogies. Do c #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system 3.22 – Push tabs on the inside of the bez el to disengage from the chassis.
Een belangrijk punt na aankoop van elk apparaat WatchGuard Technologies XTM 5 Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen WatchGuard Technologies XTM 5 Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens WatchGuard Technologies XTM 5 Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding WatchGuard Technologies XTM 5 Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over WatchGuard Technologies XTM 5 Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van WatchGuard Technologies XTM 5 Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de WatchGuard Technologies XTM 5 Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met WatchGuard Technologies XTM 5 Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
