Gebruiksaanwijzing /service van het product Parametric Convolution Reverb IR-1 van de fabrikant Waves
Ga naar pagina of 40
W a v es P ar ametric Con v olution R e v e rb IR-1, IR-L and IR-360 User’ s Guide Waves IR-1 software guide page 1 of 40.
TABLE OF CONTENTS Overview Synthetic Digital Reverberation Sampled-Acoustics Convolution Rev erberation The Perfect Hybrid The Impulse Responses IR Library Factory Presets Sampled Acoustics V2 Virtual.
LF damping Reverb EQ ER Buildup ER/TR-X Crossover IR-360 Controls Toolbar WaveSys tem Controls Loading Im pulse Responses Saving Importing Impulse Responses IR Info a nd Properti es Notes on “Flat P.
Introduction The Waves IR-1, IR-L and IR-360 plug-ins create extremely high quality replicas of acoustical spaces and synthetic reverbs. T hey also allow the us er to alter many aspects of the sound of these reverbs.
Sampled-Acoustics Convolution Reverberation In math, the term convolution means an integral which expr esses the amount of overlap of one function x as it is shifted over another function y . In the literal sense, it means to “roll together” or to “fold toget her”.
The Impulse Responses Another major part of the IR -series is the Impulse Respons e (IR) Library. The library offers a set of high-definition IR’s. Waves paid special attention to this part of the product because it is the basic reverb sound of the IR -series reverbs.
Accessing these IRs is easy. Select the desired preset from the plug-in ’s “Load” button, which will present the menu as follows: Factory Presets is the first section. It is availabl e with the installation of the IR-series, even for demo purposes.
Sampled Acoustics V2 The presets in this section are based on samples of real places. The contents of the Sampled Acoustics V2 folder on the DVD have to be copied into the IR1Impulses V2 folder inside the Waves Plug-Ins folder. You can add or delete folders from this directory.
Tips for Sampling an Acoustic Space When sampling an acoustic space, a typical se tup includes a multi-track recorder, an amplifier and speaker to play the sweep signal into the space, and one or more microphones (and mic preamplifier(s), if needed) to capture the sound.
M EASURING H ALLS , ROOMS The measuring procedure of a venue is sli ghtly different than that of measuring devices. Measuring venues requires a larger setup, which includes a playback device, a microphone and a loudspeaker.
Mono to Stereo: 2 convolutions: 1 left, 1 right. Out p ut Left Convolution Out p ut Mono In p ut Right Convolution Efficient Stereo: 2 convolutions: Left in to Left out and Right In to Right Out.
About the IR-360: The IR-360 is the surround sound version of the IR-1 . The IR-360 is HTDM for Pro Tools TDM Users. IR-360 owners will also receive an IR-1 included in the purchase.
Waves IR-1 software guide page 13 of 40.
Waves IR-1 software guide page 14 of 40.
Waves IR-1 software guide page 15 of 40.
IR- SERIES C ONTROL S AND D ISPLAYS The IR- series has a large main window with controls similar to those of a standard digital reverb. Most of the values are displa yed as a ratio of the nominal value of the original IR. The IR-360 has the most adjustable par ameters, followed by the IR-1 and then the IR-L .
Reverb Time The Reverb Time section includes these 4 parameters: C ONVOLUTION START : Range: 0 TO 1 second; Default: 0 seconds The Convolution Start determines the starti ng point of the convolution process. It enables you to remove unwanted pre- delay at the beginning of an IR.
D RY /W ET CONTROL : Range: 0 to 100% wet; Default: 100% wet This control sets the balance between the “Dry” signal and the convolved signal. A 50% Wet setting is the “natural” balance point. The IR -series lets you work either with the re corded Direct signal, or with the Dry signal (that is, the unprocessed input to IR-1).
D RY : Range: 0-30ms; Default: 0ms When working as an insert, the Dry latency c ontrol can be used to align the dry signal to the wet signal or even to advance it ahead. CPU M ODE : Range: Full CPU or Low CP U. Default: Full CPU This control allows you to select between Full CPU (Cent ral Processing Unit) or Low CPU.
IR-1 AND IR-360 C ONTROLS AND D ISPLAYS (IR-L users can skip this se ction and resume reading at Toolbar Wavesystem Controls on page 30) T HE IR G RAPH The IR graph shows dB level on the vertical axis and time on the horizontal axis. The range of the IR display is from 0dB at t he top to –90dB at the bottom.
Reverb Time The Reverb Time section includes these 4 parameters: C ONVOLUTION START : Range: 0 TO 1 second; Default: 0 seconds The Convolution Start control determines the starting point of the convolution process. It enables you to remove unwanted pre-del ay at the beginning of an IR.
The RT60 display is active only when RT60 may be computed on the IR. There is a minimum IR length (about 100 ms) for computing RT60 as well as for activating the reverb time ratio. Reverb Control Parameters S IZE : Range: .25 to 4.00; Default: 1.00 The Size is a ratio of the original IR, and cont rols the dimensions and volume of the actual room.
D RY /W ET CONTROL : Range: 0 to 100% Wet; Default: 100% Wet This sets the balance between the “Dry” si gnal and the convolved signal. 50% Wet setting is the “natural” balance point. The IR -series lets you work either with the re corded Direct signal, or with the Dry signal (that is, the unprocessed input to IR-1).
D IRECT S IGNAL Please Note: The Direct signal is not the dry signal! The dry signal is the input signal to the plug-in. The Direct signal is the direct arrival of the s ound source to the listener, traveling the shortest straight-line path between them.
Sometimes shutting off the ERs or reducing thei r level vs. the tail level will leave a lot of reverb, but will sound less distant so t hat the signal sounds close and wet.
T AIL : Range: On/Off; Default: On Tail switches the reverb tail on or off. Tail Gain : Range: 0.0dB To Off; Default 0.0dB Tail Gain controls the level of the reverb tail. T AIL P REDELAY : Range: -100ms to 500ms; Default: 0.0ms This controls the amount of time that the reverb tail is delayed.
CPU M ODE : Range: Full CPU or Low CP U; Default: Full CPU This control allows you to select between Full CPU and Low CPU. Low CPU presents an option to slightly compromise the resolu tion of the convolution process and saves up to 45% of the CPU cycles depending on the IR length and Sample rate.
Offline Calculation Indicator Manipulating the impulse response to reflect the controls settings requires recalculation of the whole impulse response. This calculation process can take up to several seconds. While the impulse response calculat ion is taking place, the reverb envelope graph displays “Calculating…” and the audio is muted.
L OW F REQUEN CY D AMPING R ATIO : Range: 0.10 to 2.00; Default: 1.00 This control defines the ratio by whic h the frequencies below the Low Damping Frequency will decay in relation to IR’s genera l Reverb Time. Values of less than 1.00 are shorter than the IR’s Reverb Time, and va lues greater than 1.
LF damping is the reduction of reverberation time at low frequencies, due to low frequency transmission in the walls. Most rooms with solid walls have little low frequency damping.
H IGH S HELF F ILTER • Gain : Range –24dB to +12dB; Default: 0 • Frequency Range: 1000Hz to 21000Hz; Default: 5005 Hz • Q: Range: 0.71 to 1.41; Default: 1 O UTPUT GAIN : 0dB to –50dB; Default: 0dB The Output Gain controls t he overall output level of the IR-1 .
In natural IRs, there is no distinct deli neation between ER and TR ; the definition of where the best ER/TR-X crossover point is s ubjective. The user is allowed to modify the automatic decision of the plug-in by using the ER /TR-X control, in millisec onds, relative to the automatic crossover point.
IR-360 Controls: These Controls are exclusive to the IR-360: F RONT /R EAR B ALANCE : Range: Front to Rear; Default 50.0 The Front/Rear Balance control determines how mu ch of the reverb is going to the front vs.
Loading Impulse Responses The IR-1 load menu is the same load menu used in all WaveSystem plug-ins. Use “Open preset file…” to load a Waves setup f ile *.xps. Use “Im port Impulse Response from WAV...” to import IR’s either from standard .
The next three factory presets: Room – 1, Studio – 1, and Plate – 1 are from the Waves basic IR library. This IR Library is available with any install of the IR-1 plug-in.
You can import IRs in .wav and .wir formats (supported bit-depths: 16, 24 and 32- floating point, with sample rates betw een 44.1kHz and192kHz). The plug-in will automatically sample-rate convert the IR to t he sample rate you are working in (session sample rate is 96kHz maximum).
Waves IR-1 software guide page 37 of 40 • Name – Name of the location. • Type – Location type i.e. Concert Hall, Theatre, Opera House, etc. • Date – Date the location was measured. • SR – Sample rate of the IR and the samp le rate of session you are working in.
Waves IR-1 software guide page 38 of 40 • For Reverb controls having a ratio scale of 0.25 to 4 (Reverb Time, Density, Resonance, Size) the flat point is 1. • For Reverb controls having a percentage scale of 0% to 100% (Decorrelation, Crosstalk, Dry/Wet), t he flat point is 0%.
Waves IR-1 software guide page 39 of 40 Here are a few points to use in order to increase performance, sorted by priority: B UFFER SIZE : This doesn't compromise any aspect of audio quality. Thus it is the first place the user should try to optimize system performance.
Waves IR-1 software guide page 40 of 40 sounds like the rich reverb that it is, and it is a “mix-fri endly” optimization. It is important to distinguish between Reve rb Time RT60 and Conv olution length.
Een belangrijk punt na aankoop van elk apparaat Waves Parametric Convolution Reverb IR-1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Waves Parametric Convolution Reverb IR-1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Waves Parametric Convolution Reverb IR-1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Waves Parametric Convolution Reverb IR-1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Waves Parametric Convolution Reverb IR-1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Waves Parametric Convolution Reverb IR-1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Waves Parametric Convolution Reverb IR-1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Waves Parametric Convolution Reverb IR-1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
