Gebruiksaanwijzing /service van het product X1273 van de fabrikant Acer
Ga naar pagina of 58
Acer Projector P1173/X1171/X1173/X1173A/ X1173N/X1173H/X1273/X1273N/ X1273H/X1373W/X1373WH Series User's Guide.
Copyright © 2013. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 11/ 2013 Acer Pro jector Acer and the Acer logo are re gi stered trademarks of Acer Incorporated.
iii Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instruct ions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning.
iv • To avoid damage of internal componen ts and to prevent battery leakage, do not place the product o n a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected sho rt current or damage rotor devices or lamp.
v Product servicing Do not attempt to service this product yourself, as opening o r removing covers may expose you to dangerous vo ltage points or other risks.
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire.
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level af ter your ears have adjusted. • Do not listen to music at high volumes f or extended pe riods.
viii First Thing First Usage Notes Do : • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
Information for Your Safety and Comfort iii First Thing First viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Contr.
Troubleshooting 28 LED & Alarm Definition Listing 32 Replacing th e Lamp 33 Ceiling Mount Install ation 34 Specification s 37 Compatibility Modes 40 Regulations and safety notices 44.
1 English Introduction Product Features This product is a single-chip D LP ® projector, including the followin g outstanding features: • DLP ® technology • P1173/X1171/X1173/X1173A/X1173N/X1173H.
2 English Package Overview This projector comes with all the i tems shown below. Check to make sure you have them all. Contact your dealer imm ediately if any thing is missing.
3 English Projector Overview Projector Outlook Front/upper side Rear side # Description # Description 1 Control panel 5 Zoom ring 2 Projection lens 6 Focus ring 3 Tilt adjusting wheel 7 Remote control.
4 English Control Panel # Function Description 1 LAMP Lamp Indicato r LED. 2P O W E R i n d i c a t o r LED Refer to the "Turning the Projector On/Off" section. 3 Keystone Adjusts image distortion caused by tilting projection (±40 de grees) .
5 English Remote Control Layout # Function Description 1 POWER Refer to the "Turning th e Projector On/Off" section. 2 MEDIA SETUP Opens MEDIA SETUP page. 3 ZOOM Zooms the projector display in or out. 4 MODE Chooses a display mode . 5 Keystone Adjusts image distortion caused by tilting projection (±40 degrees).
6 English 13 SOURCE Chooses RGB , component video, S -Video, composite video, HDMI or HDTV source. 14 HIDE Press "HIDE" to hide screen image; press again to display the image. 15 MENU Launches the Onscreen Di splay (OSD) menu, returns to the previous step for the OSD men u operation or exits the OSD menu.
7 English MHL Feature Introduction When your sm artphone is connected to the projecto r, you can use some buttons on the remote control to control yo ur smartphone.
8 English Getting Started Connecting the Projector Note: To ensure the projector works well with your comp uter, please make sure the timing of the display mode is compatible with the projector. Note: Some smartphones require a converter (supplied by the smartphone maker) to en able the MHL function.
9 English Turning the Projector On/Off Turning On the Projector 1 Ensure that the power co rd an d signal cabl e ar e securely connected. The Power LED will ligh t red. 2 Turn on the project or by pressing (POWER) on the control p anel or remote control, and the Power indicator LED will turn blue.
10 English Turning Off the Projector 1 To turn the projector off, press the power button. This message appears: "Please press power button again to complete the shutdown process" Press the power button again. 2 The LED Power indicator will turn solid red to indicate standby mode.
11 English Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adju sting the image height. To raise the i mage: 1 Use the front Tilt adjusting wheel to raise th e image to the desired height and angle .
12 English How to Optimize Image Size and Distance Consult the table below to find the optimal im age sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA/XGA If the projector is 3 m from the screen, good image quality is possible for image sizes between 72" and 79".
13 English • WXGA If the projector is 3 m from the screen, good image quality is possible for image sizes between 84" and 93". Note: Remind as below figure, the space of 125 cm height is required when the projector is located at 3 m distance.
14 English How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to ach ieve a desired image size b y adjusting either the position or the zoom ring. • SVGA/XGA To obtain an image size of 70", set the projector at a distance b etween 2.
15 English • WXGA To obtain an image size of 70" set the projector at a distance b etween 2.3 m and 2.5 m from the screen and adjust the zoo m level accordingly. Desired Image Size Distance (m) Top (cm) Diagonal (inch) < A > W (cm) x H (cm) Max zoom < B > Min zoom < C > From base to top of image < D > 30 65 x 40 1.
16 English User Controls Installation Menu The Installation menu provides an On screen Display (O SD) for projector installation a nd ma inte nance. Use the OS D on ly when the message "No signal" is displayed on the screen. 1 Turn on the projector by pres sing (POWER) on the control panel or remote control.
17 English Onscreen Display (OSD) Menus The projector has multilin gual Onscreen Display (OSD) menus that allow you to make i mage adjustments an d change a variety of settings. Using the OSD menus • To open the OSD menu, press "MENU" on the control p anel or remote control.
18 English Color Display Mode There are many factory presets optimized for various types of images. • Bright: For br ightness optimizati on. • Presentation: For meeting presentation with higher brightness . • Standard: For common envir onment. • Movie: For brighter and general m ovie/video/photo playing .
19 English Note: "Saturation" and "Tint" functi ons are n ot supported under computer mode. Tint Adjusts the color balance of red and green. • Press to increase the amou nt of green in the image. • Press to increase the amount of red in the image.
20 English Image Projection • Front-Desktop: The factory default setting. • Front-Ceili ng: When you select this functio n, the projector inverts the image for ceiling-m ounted projectio n. • Rear-Desktop: When you select this function, the projector reverses the image so that you can project behind a translucent screen.
21 English Keystone Manually adjusts image distortion caused by tilting projection (±40 degrees). This function is unavailab le when Auto Keystone is s et to "On". Manual Keystone Sharpness Adjusts the sharpness of the image. • Press to decrease the sharpness.
22 English Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under vi deo mode.
23 English VGA OUT (Standby) Selecting "On" enables the function. The projector can outp ut a VGA signal when it is in standby mode an d the VGA IN (or VGA IN 1) and VGA OUT sockets a re correctly connected to the devices . Enabling this function slightly increases the sta ndby power consumption.
24 English User Password • Press to set up or change "User Passwor d". • Use the numerical keys on the remote control to set the password and press "MENU" to confirm. • To delete the digits, Press . • Enter the password again when you see "Confirm Password" displayed.
25 English Management Audio ECO Mode Choose "On" to dim the pro jector lamp, which will also lower the power consum ption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode. High Altitude Choose "On" to turn on th e High Altitude mod e.
26 English 3D Note: Supported 3D signal timings: It needs correct settings on grap hics card 3D application program for correct 3D display. The SW players, such as Stereo scopic Player and DDD TriDef Media Playe r can support 3D format files. Yo u can download these players on the web page below.
27 English - Stereoscopic Player (Trial): http ://www.3 dtv.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.trid ef.com/download/TriDef- 3-D-Experience-4.0.2.ht ml Note: "3D Sync Invert" and "3D Format" are only availa ble when "3D" is enabled.
28 English Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the follo wing troubleshooting guide. If the problem pe rsists, please contact your local reseller or service center.
29 English 3 Partial, s crolling or incorrectly displayed image (For notebooks) • Press "RESYNC" on the contr ol panel or remote control. • For an incorrectly displaye d image: • Follow the steps for item 2 (above) to adjust the resolution of your computer.
30 English Problems with the Projector 9 Image is too sma ll or too large • Adjust the zoom lever on the top of the proj ector. • Move the projector closer to or further from the screen. • Press "MENU" on the control pan el or remote control.
31 English OSD Messages # Condition Message Rem inder 1 Message Fan Fail - the system f an is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. P lease also chec k the dust filters if they are installed.
32 English LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Red Blue Red Red Standby (Power cord plugged in) V- - - - - - Power on -- V -- -- Lamp retry -- Qui ck fl.
33 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life itself. It will show you a warning message "Lamp is approach ing the end of its usefu l life in full powe r operation.
34 English Ceiling Mount Installation If you wish to install the projector using a ce iling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included.
35 English 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow fo r proper heat distribution.
36 English 5 Adjust the angle and po sitioning as necessary. Note: The appropriate type of screw and washer for each mo del is listed in the table below. 4 mm diameter screws are encl osed in the screw pack. Screw Type B Washer Type Diameter (mm) Length (mm) Large Small 42 5 V V 30 Allen Key Tightening Screw Allen Key Tightening Screw 110.
37 English Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.
38 English Digital zoom 2 X Audio P1173/X1173A/X1173N/X1 173H/X1273/X1273N/ X1273H/X1373W/X1 373WH: 3W x 1 Weight Approximate 2.0 kg (4. 41 lbs.) Dimensions (W x D x H) 264 x 220 x 78.
39 English * Design and specifications are subject to change with out notice. Standard package contents • AC power cord x 1 • VGA cable x 1 • Remote control x 1 • Battery x 2 (fo r the remo te.
40 English Compatibility Modes 1 VGA Analog - PC Signal Mode Resolut ion V.Frequency [Hz] H.Frequency [KHz] VGA 640 x 480 60 31.47 72 37.86 75 37.50 85 43.27 120 61.91 SVGA 800 x 600 56 35.20 60 37.88 72 48.08 75 46.88 85 53.67 120 77.43 XGA 1024 x 768 60 48.
41 English 2 HDMI - PC Signal WXGA 1280 x 768 60 47.78 1280 x 768 75 60.29 1280 x 768 85 68.63 1280 x 720 60 45.00 1280 x 800 60 49.70 1280 x 800 - RB 120 101.6 1440 x 900 60 55.94 1680 x 1050 60 65.29 1366 x 768 60 47.71 1920 x 1080-RB 60 66.60 1920 x 1080-EIA 60 67.
42 English 3 HDMI - Vide o Signal SXGA+_60 1400 x 1050 59.978 65 .317 UXGA_60 1600 x 1200 60 75 Mac G4 640 x 480@60Hz 59.94 31.469 MAC13 640 x 480@67Hz 66.667 35 Mac G4 800 x 600@60Hz 60.317 37.879 Mac G4 1024 x 768@60Hz 60 .004 48.363 MAC19 1024 x 768@75Hz 75.
43 English 4 MHL - Video Signal 5 YPbPr Signal 6 Video , S-Video Signal Mode Resolution V.Frequency [H z] H.Frequency [KHz] 480i 720 x 480 (1440 x 480) 60 15.73 480p 720 x 480 60 31.47 576i 720 x 576 (1440 x 576) 50 15.63 576p 720 x 576 50 31.25 720p 1280 x 720 60 45.
44 English Regulations and safety notices FCC notice This device has been tested and fo und to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
45 English English Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.
46 English List of applicable countries This device must be used in strict accorda nce with the regulations and constrai nts in the country of use. For f urther information, p lease contact a local office i n the country of use. Please see ht tp://ec.
47 English English Acer Incorporated 8F , 88, Sec. 1, Xintai 5th Rd., Xizhi New T ai pei City 221, T ai wan Declaration of Conformity We , Acer Incorporated 8F , 88, Sec. 1, Xintai 5th Rd ., Xizhi, New T aipei Ci ty 221, T aiwan Contact Person: Mr. RU Jan, e-mail:ru_jan@acer .
48 English Acer America Corporation 333 W est San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. T el: 254-298-40 00 Fax: 254-298-4147 www .acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules.
Een belangrijk punt na aankoop van elk apparaat Acer X1273 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Acer X1273 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Acer X1273 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Acer X1273 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Acer X1273 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Acer X1273 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Acer X1273 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Acer X1273 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
