Gebruiksaanwijzing /service van het product RF365PXW van de fabrikant Whirlpool
Ga naar pagina of 28
a ELECTRIC -J--m---- Self-Cleaning Model y RF365PXW.
Contents Page BEFORE YOU USE YOUR RANGE 2 IMPORTANT SAFETY INSTRUCTIONS. 3 PARTS AND FEATURES. 5 USING YOUR RANGE. 6 Using the Surface Units. 6 Optional Canning Kit 7 Setting the Clock 8 Using the Minute Timer.
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrlcal shock, injury to persons, or damage when using the range, follow basic precauttons, Including the followlng: l Read all instructions before using Never pick up a flaming pan. the range.
I 4 ) Turn pan handles inward, but not over other surface units. This will help reduce the chance of burns, igniting of flammable materials, and spills due to bumping of the pan. ) Do not soak removable heating elements in water. The element will be damaged and shock or fire could result.
Parts and features Model RF365PXW AUTOMATIC OVEN LIGHT OVEN MEALTIMER” SWITCH SELECTOR SURFACE UNIT CLOCKI I OVEN TEMPERATURE MARKER 1 I RIGHT FRONT MINUTE TIMER CONTROL I CONTROL KNOB L:FI FRONT CO.
Using your range Using the Surface Units PUSH IN :: ANDTURN I Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface Unit Markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Use only flat-bottomed utensils for best cooking results and to prevent damage to the cooktop. Specialty items with rounded or ridged bottoms (woks, ridged bottom canners or tea kettles) are not recommended.
Setting the Clock Push in and turn the Minute mmer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. Let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF.
Using the Oven Controls Baking I Position the rack(s) properly before turning on the oven. To change rack position, lift rock at front and pull out. 2. Set the Oven Selector to BAKE. 4. Put food in the oven. During bak- ing, the elements will turn on and off to keep the oven temperature at the setting.
Adjusting the Oven Temperature Control Does Your oven seem hotter or colder than Your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures.
Broiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. 3. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm). The door will stay open by Itself.
Using The Automatic MEALTIMER’” Clock The automatic MEALTIMER I* Clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
To start baking now and stop automatically: m 1. Position rack(s) properly and place food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off. Make sure the Start Time Knob is out.
The Storage Drawer The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti-tip bracket. Use care when handling the drawer. Removing the storuge drawer 1.
Optional Door Panel Pat If you would like to change the color of your oven door glass to white or almond, you can order one of these kits: White (Kit No. 814069) or Almond (Kit No. 814070) from your Whirlpool Dealer. The kits include easy installation instructions.
Surface Units and Reflector Bowls Removing Burn and Electrical Shock Hazard Make sure all surface units are OFF before removing surface units and reflector bowls. Failure to do so can result in burns or elec- trical shock. 1. Turn off all surface units.
Replacing Burn, Electrical Shock and Fire Hazard l Make sure all surface units are OFF before replaclng surface units and reflector bowls. Failure to do so can result in burns or electrical shock. l Do not line the reflector bowls with foil. Fire or electrical shock could result.
Lift-Up Cooktop I 1. Lift front of cooktop at both front corners until the support rods lock into place. Personal Injury and Product Damage Hazard l Be sure both support rods are fully extended and in the locked position. Failure to do so could result in personal injury from the cooktop accidentally falling.
4. It you want the oven racks to remain shiny, remove from the oven and clean by hand. Otherwise, put oven racks on second and fourth guides (guides are counted from bottom to top). After racks are cleaned in the Self-Cleaning cycle, they become harder to slide.
Setting the Controls Be sure the kitchen is ventflated durlng the Self-Cleaning cycle. This will help heat, odors and smoke to disappear from the room as quickly as possible. 1. Set the Oven Selector and Oven Temperature Control to CLEAN. 2. Make sure the Clock, Start and Stop Times all have the right time of dav.
Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of heat, odors and smoke. l Clean the oven before it gets heavily soiled.
Cleaning Chart PART WHAT TO USE HOW TO CLEAN Exterior surfaces Warm soapy water and a soft cloth. Non-abrasive plastic scrubbing pad for heavily-soiled areas. l Wipe off regularly when range is cool. l Do not allow food contalnlng acids (such as vinegar, tomato, lemon juice or milk) to remain on surface.
The Oven Light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel.
If you need service or assistance, we suggest you follow these steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. It nothing operates: l Is the power supply cord plugged into a live circuit with the propervolt- age? (See Installation Instructions.
3. If you need service?.. WhirlDOOi has a service compa- nies. Whirlpool service technicians are trained to fulfill the product warranty and pro- vide after-warranty service, any- where in the United States.
Notes 26.
Notes.
WHIRLPOOL” RANGE PRODUCT WARRANTY EROO LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSP@ replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by an authorized WhirlpoolSM service company.
Een belangrijk punt na aankoop van elk apparaat Whirlpool RF365PXW (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Whirlpool RF365PXW heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Whirlpool RF365PXW vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Whirlpool RF365PXW leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Whirlpool RF365PXW krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Whirlpool RF365PXW bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Whirlpool RF365PXW kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Whirlpool RF365PXW . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
