Gebruiksaanwijzing /service van het product Joybee 200 van de fabrikant BenQ
Ga naar pagina of 69
We l c o m e J o ybee 200 MP3 Play er Us e r M a n u a l.
C op yri ght All rights reserved. N o part of t his publication ma y be reproduc ed, transmitted, recorded, stor ed in a retr ieval system, or translated into any lang uage or comput er language, in an y form or by an y means, electronic, mechanical, recording, photocop yin g, or otherwis e, without the prior per mission of the BenQ Corporation.
• Do not clean the de vice w ith chemical solvents. Clean the devi ce with a cloth dam pened w ith water . • U se only the adapt er and acc essories approv ed by t he manu- facturer . The warr anty is voided if other ad apters or accesso- ries are us ed, which ma y be danger ous.
Me m o.
1 T able of Cont ents Introduction ................................................................................. 1 System requirements .................................................................... 2 Package contents ........................
2 Setting the recording options .................................................. 30 Setting up a timer recording ......... ........................................... 33 Setting the power save option .................................................
1 Intr oducing the BenQ J o ybee 200 MP3 Pla yer Introd uct ion Thank you for pur chasing the BenQ J oybee 200 MP3 Pla yer! The BenQ Jo ybee 200 MP3 Player offers high quality audio playb ack and v oice r ecor ding functio ns at lo w pow er con- sumption.
2 When the batt eries are fully charged, Jo ybee 200 offers about 10 hours of con ti nuo us rep lay t ime for MP 3 mu sic . Howe ver, the e xac t re pl ay time depends on the condition of the battery , the volume level and many other factors.
3 P ackage cont ents Check the c ontents of y our Jo ybee 200 MP3 Play er pack- age. Contact your dealer i mmediately if any of the follow- ing are miss ing or damaged. 1. BenQ Joybee 200 MP3 Pla yer 2. Carr ying pouch 3. W arranty car d 4. A C power adapt er & plug 5.
4 T ouring the BenQ Jo ybee 200 MP3 Player The following section d escribe s the var ious components of the Joybee 200. Butto ns a nd po r ts oybee J 200 MP3 Player REC MODE A-B VOL LINE IN T T Left V.
5 Put ting leather strap on Follw t he steps below to p ut the leather strap on your J oy- bee 200. (1) (2) (3) (4).
6 Item Description Func t i on (1) Mo d e • Press to switch modes. • Press and hold for 2 sec onds to display options f or the curr ent mode. • Press to cancel current setting and go back to the pr evious level in setup or playback mode. (2) A-B repeat/ Lock) • Follow this proc edure to re peat a desired sectio n during au dio playback.
7 (7) P ower on/off, Play/P ause/ Stop/Enter • Press and hold for 2 sec onds to turn on the Joybee 200. • Press and hold for 2 sec onds to turn the player off. The message ‘Syst em Off ’ is displayed o n the screen befor e the power goes off .
8 (9) Previous/Fast Rew i n d, Nex t / Fa s t For w ar d b ut ton s • Press onc e to skip to the previous or next file in audio file pl ayback mode . • Press and hold for 4 sec onds to rewind or fast forward an audio file in playback mode. • Press once to scrol l to the prev iou s or next ite m in menu mode.
9 LCD d i s p l a y The LCD screen displays information about the player mode and file inf ormation. The following table sho ws the icons displa yed on the sc reen and their meanings. Icon Description Indicates audio file being scanned in for ward directio n (Forward).
10 Indicates voice recording mode. Indicates audio recording mode. Indicates FM mode. Indicates setup mode. Indicates batt ery status. Indicates keys are lock ed.
11 Getting Star ted Charging the batter y Follo w these steps t o charge the J oybee 200’ s battery . 1. Remo ve the translucent rubber cov er from the charger sock et. Insert one end o f the power adapter cable into the USB port of the Jo ybee 200 and the other end to the adapter.
12 It tak es around 1 hour t o quick charge the J oybee 200 built-in battery . For fully charge of thwe batt ery , it takes about 3.5 ho urs. • Exact charging time depends on batter y status. • Chargers for use in some areas ma y not have an indicat or .
13 Connecting earphones and w ired remot e control Foll ow thes e steps t o co nnect earphones an d wired re mote cont ro l. • Plug the ea rphones into the earph one jack on the wi re d re mo te co nt ro l a s s how n in th e il lus tr a ti on .
14 Connecting the Jo ybee 200 to a PC Connect the Jo ybee 200 to y our PC with the USB cable provide d as show n in th e illus tra tion. When the Jo ybee 200 is successfully connect ed to the PC, a new Rem o va b l e D i sk icon appears in the My C o m p u t e r window on your PC.
15 Disconnecting the Jo ybee 200 fr om a PC Follo w these steps t o disconnect the Jo ybee 200 from a PC. 1. Double click the USB device icon on the taskbar . A dialo g box as shown b elow app ears on the screen. 2. Select USB Mass S to ra ge D ev i ce in the dialog bo x and press Stop .
16 4. W hen the follo wing dialog box appear s on the screen, press OK and di sconnect the J oybee 200 from the PC. The procedur e described here may differ for the differ ent operating sys- tems.
17 Installing the software Insert the software CD pr ovided with the Joybee 200 in the CD-ROM driv e on your PC. The follo wing installation menu is display ed on the PC screen. If the installation menu do es no t appear on your PC scr een, open Explorer in W indows and locate the ‘autorun.
18 Click to select and install the d esired softwar e. Follow t he instructions on the screen to c omplete the installation. The following table shows the co ntents and functions of the software suite on the CD .
19 Installing the USB driv er Installing in W indows ME/W indows 2000/W indows XP Follo w these instructions to install a USB driv er . 1. T urn on the BenQ Joybee 200 MP3 Player. 2. Connect the J oybee 200 to the USB port of y our computer using the USB cable provi ded.
20 U sing the BenQ J o ybee 200 MP3 Pla yer T ur ning the Jo ybee 200 on and off Follo w these steps to t urn the Joybee 200 on or off. • Press and hold the power button for 2 seconds to turn on the Joybee 200. After the welcome note is display ed, the Joybee 200 enters whatever mode the pla yer was in when it was swit ched off.
21 T ransferr ing data to the Jo ybee 200 Y ou can transfer music files to the Joybee 200 using W in- dows Explo rer or the QM usic software pr ovided.
22 Playing MP3/WMA music files U se the fo llowing pr ocedur e to q uickly s tart listening t o your fa vorite music on the BenQ Joybee 200 MP3 Player. 1. T urn on the Jo ybee 200. 2 . Pre s s t h e M O D E b u t t o n re p e a t e d l y to s w i t c h t o M P 3 mode.
23 Rep e a t p l ay Y ou can use the repeat function to pla y a selected track, section, all files or a random file r epeatedly . 1. Press and hold the MODE button for two sec onds while a track is playing t o displa y a popup menu. 2. U se the o r k e y s t o s e l e c t the REPEA T option .
24 Selecting an EQ mode The Joybee 200 provides seven equalizer modes to enhanc e the quality of audio . Select the EQ mode as described in the following pr ocedur e. 1. Pr ess and hold the MODE button for two sec onds while a track is playing t o displa y a popup menu.
25 Listening to FM radio The radio mode of the Joybee 200 enables you t o listen to FM radio as follows. 1. T urn on the Jo ybee 200. 2. Pr ess the MODE button rep ea ted ly to sw i tch to FM mode. 3. Choose an FM frequency using one of the followi ng procedur es.
26 Saving preset channels in memory Follow these steps to save y our fav orite radio stations for quick access . 1. When listening to your fav orite channel, press and hold the MODE k ey for 2 seconds to display a pop-up menu. 2. U se the or keys to choose a c hannel number (1-32).
27 equalizer functions are al so available when you pl ay back a rec orded program. Refer to "Repeat pla y" on pa ge 23, "Selecting an EQ mode" on page 24, and "Selecting a playback speed" on page 24 for more details.
28 Pl ay i ng ba c k re cord e d a u di o f i le s V oice mo de enables you to play back your recorded (FM, MIC or LINEIN) files. The recorded files ar e saved as MP3s with the filename indi cating the source of the reco rding, the date and the order in which they were reco rded .
29 Syst em setup Deleting files from the Joybee 200 Follo w these instructions to delete any files from y our Jo ybee 200. 1. T urn on the Jo ybee 200.
30 7. Press to confirm your selection. 8. Pr ess the MODE key to exit from the setup menu. Y ou can also use QMusic or W indows Explorer t o delete files on the Joybee 200. Setting the recor ding options Y ou ca n se t t he reco rdi ng qu al it y wh en reco rdi ng fro m F M radio, the internal micro phone, or an external aud io sig- nal.
31 7. Press to confir m your selection. T o specify the default sou rce signal when recording v oice files, do the following: 1. T urn on the Jo ybee 200. 2. Pr ess the MODE button r epeatedly t o switch t o SETUP mode. 3. U se the or keys to highlight REC Setting from the menu and press the key to co nf ir m yo ur choice.
32 The Jo ybee 200 has the V OR feature that only recor ds when a voice s ignal is detec ted and stops re cording if there is no voice or audio signal. Th is prevents blank spaces in your r ecord ed files. T o enable the V OR feature, do the fol- lowing: 1.
33 Setting up a timer recor ding The Jo ybee 200 can be pr ogrammed to start rec ording automatically at a specified time, from a specified input source. T o set up a timer r ecording, do the following: 1. T urn on the Jo ybee 200. 2. Pr ess the MODE button r epeatedly t o switch t o SETUP mode.
34 10. U se the or keys to set the date and time when the record ing end s. Set th e da te (year , month, date) and the time (hours and minutes) using the or keys and press after each option to move to the next.
35 6. Press to confirm your selection. U sing the lyric sync function The Jo ybee 200 has a special featur e that enables yo u to know the view the ly ri cs on the display when play ing back music. The L yrics edit ing tool in QM usic enables you t o create the lyrics and you can enable the lyrics sync feature using the setup menu as follows: 1.
36 U sing the play list function The Jo ybee 200 pro vides a play li st feature that hel ps you create pla y lists of your fav orite songs. Create play lists using QM usic and play them on your J oybee 200 b y acti- vating the play li st feature as follo ws: 1.
37 Setting the d ate and time Follo w these steps to set the dat e and the time: 1. T urn on the Jo ybee 200. 2. Pr ess the MODE button r epeatedly t o switch t o SETUP mode. 3. U se the o r k e y s t o s e l e c t the Date - T ime option. 4. Press to confirm your selection.
38 Setting the language Follow these steps to set the language: 1. T urn on the Jo ybee 200. 2. Pr ess the MO DE button repeatedly to switc h to SETUP mode. 3. U se the o r ke y s t o s e l e c t the Language option . 4. Press the ke y t o co n- firm your selection.
39 Fo rmatting t he Jo ybee 200 Follo w these steps to format the J oybee 200 and d elete all its co ntents: 1. T urn on the Joybee 200 2. Pr ess the MODE button r epeatedly t o switch t o SETUP mode. 3. U se the o r k e y s t o s e l e c t the Form at op ti on.
40 U pgrading the fir mwar e Follo w these st eps to upgrade the f irmwar e of the Jo ybee 200: 1. T urn on the Jo ybee 200 2. Pr ess the MO DE button repeatedly to switc h to SETUP mode. 3. U se the o r ke y s t o s e l e c t the Sys Upg r a de option.
41 Viewing system information T o view information about the system such as details about memor y usage, number of music and voice files, and the version number of the firmware, do the following: 1. T urn on the Jo ybee 200. 2. Pr ess the MODE button r epeatedly t o switch t o SETUP mode.
42 U sing QM usic QM usic is software p rovided to help you to organize your music collection. Y ou can use it to play audio CDs or MP3s on your PC, c onv ert audio CD tracks into MP3 format, create pla ylists, transfer music to your J oybee 200, burn music CDs and create y our own music album.
43 Overv iew of QM usic The user interface of the QMusic program is shown in the illustration below. Act i o n buttons Left panel Display Right pane Fea tur e buttons Search wind o w Sys tem buttons P.
44 Feat ure s Description Action buttons Pro vides sp e cific QMusic functions. Left button: Con vert CD audio tracks to MP3 formats. Right button: Add audio files saved in your PC to eit her Mus i c L i b r a r y or MP3 folder under Jo ybee 200. Left panel Displays all files supported by QMusic.
45 My Jo y b e e : QM usic automaticall y synchronizi ng function folder . When y ou set Joybee 2 00 MP3 player automatically synchr onizing every time the Joybee 200 MP3 player is connected t o your PC, the audio files in Jo ybee 200 will be replaced by the files here.
46 For more detailed information on buttons function, please refer to HELP file. Playback buttons Pro vides func tions such as playing a selected file, skip ping to th e next or p revious files, pausing playback, stopping playback, ejecting a CD , and volume control.
47 A dding music to the J oybee 200 using QM usic Connect the J oybee 200 to the PC using the proc edure de s cr ib e d i n "C o nn e c t i ng t h e Joy b ee 2 0 0 to a P C " o n p a ge 1 4 . The icon appears in the left panel of the QM usic interface , and the directories on the J oybee 200 are displayed und er the icon.
48 Addin g music from an audio CD to Jo ybee 200 1. Put an audio CD in the CD-ROM on your PC. The icon appears in the left panel of QM usic, and the files on the CD appear in the right panel. 2. Select the files to be added to the J oybee 200 by clicking the check bo x es in front of the files.
49 3. Click the icon, and QM usic starts co nv erting the selected files int o MP3 files. 4. After the conversion is completed , a New A lb u m is added to the left panel. All the c on verted files ar e placed in this album. Cl ick the New Album to dis- play the details of files in the right panel.
50 5. Select the files to be added to the J oybee 200. T o select more than one file, pr ess and hold the Ctrl key on the keyboard while sele cting the files. T o se lect all files, click the fir st file, press a nd hold the Shift key on the keyboard, and then cl ick the last file.
51 6. Drag to cop y the selected files from the right panel to the MP3 directory under the icon. • Check if there is enough memory space on Jo ybee 200 before trans- ferring files to Jo ybee 200.
52 Adding files from a PC to Jo ybee 200 Follo w these steps to add files from a PC to yo ur Jo ybee 200. 1. Click the My Jo y b e e folder in the left pan el.
53 2. Press to open a dialogue box fo r select ing files. Browse and select MP3, W A V or WMA files to be add to the Jo ybee 200 from the PC. Press Ope n to add the selected files to My Jo y b e e .
54 4. Pr ess and QM u sic starts transfer ring the files in the My J oy b e e folder to the Jo ybee 200. Before transferr ing the selected files to Joybee 200, QM usic shows a dial og box t o ask if you want to delete the existing files in the M y Jo ybee folder .
55 U pdating Jo ybee 200 auto matically w ith QM usic Y ou can set up the Jo ybee 200 to be updat ed with the music from the My J oy b e e folder automatica lly when it is conn ec te d to the PC .
56 2. Pr ess to open a dialogue box for selecting files. Browse and select MP3, W A V or WMA files to be added to the Jo ybee 200 from the PC. P ress Open to add the sele cted files to My Jo y b e e . 3. Pr ess on the rig ht panel of QM usic in the func- tion button area.
57 4. In the Option dialog bo x shown, click the Joybe e tab. 5. Select A utomatically launch QM usic when Jo ybee added under Launc h Settings and Au t o m a t i c a l l y transfer MP 3 files to Jo y.
58 Upd a te S e tt i n g s . Clic k the button to sav e your settings. 6. Connect the J oybee 200 t o the PC and QM usic auto- matically updates the fil es on Joybee 200 with the files in My J oy b e e folder .
59 1. Start QM usic. 2. T urn on the Joybee 200 and connect it t o the PC using the USB cab le. 3. Locate the files to be dele ted by clickin g on the MicIn or MP3 subdirectory under the icon in t he left panel of QM usic. 4. The files in the select ed direct ory are display ed in the right panel.
60 files, click the fir st file, press a nd hold the Shift key on the keyboard, and t hen click the last f ile. 5. Pr ess the Delete k ey on the keyboard to delete all selected files fr om the Jo ybee 200.
61 T roubleshooting U nable to transfer files t o Joybee 200. Check the fo llowing: • The USB cable has been securel y conn ected to th e PC and Jo ybee 200, and the Joybee 200 is turned on. • The USB driver has been installed on your PC. • The b atter y on Joybee 200 is charged .
62 Ser v ice I nformat ion If y ou cannot sol ve th e proble ms encount ered whil e using the Joybee 200 with the troubleshooting guide, pl ease con- tact our worldwide serv ice locations to obtain the latest drivers and online support serv ices.
63 America USA +305-593-5250 compume x@fdr .com Los Angeles 888-723-2238 BenqCS.us@benq.com Mexic o 01-800-712-7745 support.latinamerica@be nq.com Chile 562-399-5000 rc ox@v ector .cl Middle East The U nited Arab Emirates +971-4-2825767 DhirajManghnani@ben q.
Een belangrijk punt na aankoop van elk apparaat BenQ Joybee 200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen BenQ Joybee 200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens BenQ Joybee 200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding BenQ Joybee 200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over BenQ Joybee 200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van BenQ Joybee 200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de BenQ Joybee 200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met BenQ Joybee 200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
