Gebruiksaanwijzing /service van het product LC-436 van de fabrikant White
Ga naar pagina of 20
21” M U L CH I N G P U S H M O W E R M O D E L N O : LC-436 PRINTED IN U.S.A. FORM NO. 770-10059 (10/98) O PER AT OR’S M AN UAL IMPOR TANT: READ SAFETY RULES AND INSTRUCTIONS CAREFUL LY WHITE OUTDOOR PRODUCTS COM PANY P.
2 Content Page Finding Model Number .................................................................................................................. 2 Warranty .........................................................................................
3 1. GENERAL OPERATION • Read this owner’s guide carefully in its entirety before attempting to assemble this machine. Read, understand, and follow all instructions on the machine and in the manual(s) before operation. Be completely familiar with the controls and the proper use of this machine before operating it.
4 DO: • Mow across the face of slopes; never up and down. Exercise extreme caution when changing direction on slopes. • Watch for holes, ruts, hidden objects, or bumps. Tall grass can hide obstacles. • Always be sure of your footing. A slip and fall can cause serious personal injury.
5 SECTION 4: SLOPE GAUGE Use this page as a guide to determine slopes where you may not operate safely. 15 o SIGHT AND HOL D THIS LEVEL WITH A VE RTICAL TREE A POWE R P OLE A CORNER OF A BUILDING OR A.
6 SECTION 5: UNPACKING Removing Unit From Carton • Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton. • Remove loose parts if included with unit (i.e., owner's manual, etc.). See Figure 1.
7 Assembling Handle • Raise the lower handle in the direction shown in Figure 3 till it snaps into place. Note: Make sure to route the cables inside the lower handle. Also do not crimp the cables while lifting the handle up. For shipping purposes, the hairpin clip is placed in the outer hole of the weld pin on the lower handle.
8 Attaching Side-Discharge Chute Your lawn mower was shipped as a mulcher. Remove the mulching cover and attach the side-discharge chute to discharge grass clippings. • Lift the hinged mulching plug. Slide the two hooks on the side discharge deflector under the hinge pin on the mulching plug assembl y .
9 SECTION 7: ‘ CONTROLS Read this owner’s manual and safety rules before operating your lawn mower. Compare the illustrations in Figure 7 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
10 SECTION 8: OPERATION Gas And Oil Fill-Up Oil: • Only use high quality detergent oil rated with API service classification SF, SG or SH. Use SAE30 oil; do not use 10W40 oil. • Fill oil sump and check the oil level following steps below. a. Position the mower on level ground and clean area around oil fill plug.
11 • Be sure that the lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal injury to the operator and others.
12 Pivot Points • Lubricate the pivot points on the blade control handle, brake cable and the cutting height adjustment lever at least once a season with light oil. The blade control handle must operate freely in both directions. The cutting height adjustment lever should be able to move easily.
13 • Remove the blade and adapter from the crankshaft. To Replace Blade: • Before reinstalling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. • Install the blade adapter on the crankshaft with the “star” away from the engine.
14 • Turn the lower handle around so the notch on the bottom of the lower handle is facing forward as shown in Figure 10. Reassemble, placing the bottom holes in the handle over the weld pins in the handle mounting bracket. FIGURE 10 • Reassemble the upper handle to the lower handle.
15 SECTION 11: OFF-SEASON STORAGE Prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more. Store the mower in a clean, dry area . Mower • Clean underside of the mower following instructions in the Maintenance section of this manual.
16 SECTION 12: TROUBLE-SHOOTING GUIDE PROBLEM POSSIBLE C AUSE CORRECTIVE ACTION Engine fails to start 1. Blade control handle disengaged 2. Spark plug wire disconnected 3. Throttle control lever not in starting position 4. Fuel tank empty, or stale fuel 5.
17 SECTION 12: REPAIR PARTS 7 19 18 15 6 4 13 2 11 12 25 9 16 1 3 14 29 20 72 74 75 23 57 53 58 66 67 51 54 71 21 22 56 55 39 40 32 36 34 33 32 81 40 39 43 44 45 77 41 42 65 62 50 48 47 45 44 80 77 59.
18 Ref. No. Pa rt N o. Cod e Description 1 647-0004 Control Handle Assembly 2 710-1205 Rope Guide 3 720-0279 Handle Knob 1/4-20 Thd. 4 710-1174 Curved Hd.
19 MANU FA CTURER’S LIMITED WARRANTY FOR: For TWO YEARS from the date of retail purchase within the United States of America, its possessions and territories, White Outdoor Products Company will, at its option, repair or replace, for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship.
WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Een belangrijk punt na aankoop van elk apparaat White LC-436 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen White LC-436 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens White LC-436 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding White LC-436 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over White LC-436 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van White LC-436 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de White LC-436 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met White LC-436 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
