Gebruiksaanwijzing /service van het product Pro 580 van de fabrikant Xerox
Ga naar pagina of 194
.
©2001 by X erox Corpor ation. All rights reserved. X erox® and all X erox products mentioned in this publication are trademarks or registered tr ademarks of X erox Corporation. Windows™ is a tr ademark of Microsoft Corporation. Product names and tr ademarks of other companies are also acknowledged.
iii Contents C ONTENTS Getting Started ...................... 1.1 Introduction ................................................. 1.2 Welcome! ........................................................................... 1.2 Information and Service .....
iv Contents Fax and Copy Operations ....... 3.1 Setting up the WorkCentre Pro 580 .............. 3.2 Setting Volume ................................................................... 3.2 Setting Alert Tones ...........................................
v Contents Canceling a Scheduled Operation ..................................... 3.56 Additional Functions .................................. 3.57 Sending a Flash ................................................................ 3.57 Monitoring a Dual Job Status .
vi Contents Troubleshooting .................... 6.1 Clearing Jams ..................................................................... 6.2 LCD Error Messages .......................................................... 6.7 Fax Problems ...............
Congratulations on acquiring y our new X erox W orkCentre Pro 580. The features, ease of oper ation, and reliability of the W orkCentre Pro 580 allow y ou to concentrate on y our business and leave the copying/printing/faxing/scanning to your W orkCentre Pro 580 and X erox experts.
1.2 Getting Started Introduction Welcome! Thank you for purchasing the W orkCentre Pro 580, a powerful multifunction system. With the W orkCentre Pro 580, you can: Fax Use the W orkCentre Pro 580 as a full-featured stand-alone fax machine to send and receive fax es.
1.3 Getting Started Information and Service For answers to questions y ou might hav e regarding your W orkCentre Pro 580, for hints and tips, or for further assistance with the installation of y our W orkCentre Pro 580: Visit our W eb site at http://www.
1.4 Getting Started Supplies T o order supplies for all of your W orkCentre and W orkCentre Pro products, call toll free: 1-800-692-6664 or your local X erox A uthorized Dealer (http://partner .
1.5 Getting Started Safety Notes Y our W orkCentre Pro 580 system and supplies are designed and tested to meet strict safety requirements. Included are safety agency examination and appro val, and compliance to established environmental standards.
1.6 Getting Started safety feature. T o av oid the risk of electric shock, contact your electrician to replace the receptacle if y ou are unable to insert the plug into the outlet. Nev er use an adapter plug to connect the system to a power source receptacle that lacks a ground connection terminal.
1.7 Getting Started Use of an extension cord with the W orkCentre Pro 580 is not recommended or authorized. A void direct viewing of the document lights. The lamps are bright and, while not harmful, they ma y cause an annoying afterimage. Alwa ys keep the document cov er closed during operation and stor age.
1.8 Getting Started Contents Here’ s what comes with your machine. WorkCentre Pro 580 Laser printer cartridge Document exit tray Document input tray Handset Handset cradle Power cord * Telephone lin.
1.9 Getting Started Main Components and Functions Before installing the W orkCentre Pro 580, take a moment to familiarize yourself with the main components and their locations related to the scanner and paper print paths.
1.10 Getting Started Printer Path Components Paper for printing, receiving fax es and copying follow the printer path. This path consists of the following parts: Automatic paper feeder extension tray Supports the print paper . Aligns paper . Use to feed paper one sheet at a time.
1.11 Getting Started Rear View 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Extension Power cord connector .
1.12 Getting Started Control Panel Components The following buttons and features control the oper ations of the W orkCentre Pro 580. 12 45 78 0 01 02 03 04 05 16 17 18 19 1 1 12 13 14 15 20 06 07 08 0.
1.13 Getting Started 3 6 9 Setup Use to choose or set up v arious system options. Advanced Fax Use to access advanced fax oper ations. Report/Help Use to print various reports and the help list. Scroll/Volume Use to scroll through the menu items or use to move the cursor left or right through the display .
1.14 Getting Started Installing the WorkCentre Pro 580 Choosing a Location T o help guarantee trouble-free oper ation of your machine, place it on a flat, stable surface near your workstation. Leav e enough space to allow for easy paper loading, paper unloading, and opening of the front co ver .
1.15 Getting Started Attaching the Trays Document Input Tray Insert the two tabs on the document input tr ay into the slots as shown. Document Exit Tray Insert the two tabs on the document exit tr ay into the slots on the front of the W orkCentre Pro 580.
1.16 Getting Started Handset and Handset Cradle 1 Plug the end of the coiled cord of the handset into the jack on the left side of your machine. 2 Hold the cradle using y our hand as shown.
1.17 Getting Started Connecting to the Phone Line Telephone Line Plug one end of the telephone line cord into the line jack on the back of the W orkCentre Pro 580 and the other end into a standard phone w all jack.
1.18 Getting Started Connecting to the Computer Y our Xero x W orkCentre Pro 580 is equipped with a par allel interface port for use with IBM PCs and compatible computers. Using the supplied Centronics par allel cable, connect your W orkCentre Pro 580 to a computer that supports bi-directional communications (IEEE standard 1284).
1.19 Getting Started Plugging In the AC Power Cord Plug one end of the cord into the back of the machine and the other end into a standard AC power outlet. The W orkCentre Pro 580 will turn on and the displa y will show “SYSTEM INITIAL. ” It will then prompt you to enter the date and time.
1.20 Getting Started Loading Paper For best results, use high qualit y xerogr aphic paper . The automatic paper feeder can hold a maximum of 150 sheets of 20lb (80 gs/m 2 ) plain paper . The maximum capacity ma y be less, depending on the paper thickness.
1.21 Getting Started 3 Insert the paper with the print side facing y ou and the top of the page going into the tr ay first. N OTE : Letterhead is shown in the previous illustration for reference only . 4 Adjust the paper guides to the width of the print media.
1.22 Getting Started Installing the Laser Printer Cartridge 1 Open the front cov er by pulling the cover release buttons on both sides of the W orkCentre Pro 580 towards you. 2 Unpack the laser printer cartridge from its plastic bag, and then carefully remov e the protective cov er sheet.
1.23 Getting Started 4 Locate the cartridge slots inside the machine, one on each side. 5 Grasp the handle on the front of the laser printer cartridge and slide it down along the cartridge slots until it clicks into place. 6 Close the cover . Mak e sure that the cover is securely closed.
1.24 Getting Started Setting the Date and Time The current date and time are shown in the display when the machine is on and ready for use (Standby mode). The date and time are printed on all fax es that you send. When y ou install your machine for the first time, the displa y prompts you to reset the date and time.
1.25 Getting Started in the following order: MONTH, DA TE, YEAR, HOUR, and MINUTE. Enter the time in 24-hour format. F or example, enter 22:30 for 10:30 P .M. If you enter an in valid number , the display does not proceed to the next step. If this happens, re-enter the correct number .
1.26 Getting Started 4 Enter the telephone number (up to 20 digits) to which your machine is connected. Press for plus sign (+) and # for a h yphen. If an incorrect number is entered, press the or button to move the cursor under the incorrect digit, then enter the correct number , or press the Search/Delete button to delete it.
1.27 Getting Started Entering Alphanumeric Characters As you perform v arious tasks, you will need to enter names and numbers using the number k eypad. For example, when you set up the W orkCentre Pro 580, you hav e to enter your name (or your compan y’ s name) and telephone number .
1.28 Getting Started Or: If the next letter is printed on the same Number k eypad button, move the cursor right b y pressing button, then press the Number keypad button labeled with the letter you w ant. The blinking cursor mov es right and the next letter appears on the display .
1.29 Getting Started Editing Name If you make a mistak e while entering a number or name, move the cursor under the incorrect digit b y pressing or . Then, press the correct number to change, or press the Search/Delete button to delete the number . Using Save Modes There are four sav e mode buttons on the front panel of the W orkCentre Pro 580.
1.30 Getting Started • If the LED is on, P ower Save mode activ ates and the machine will go to a reduced power state. But it tak es slightly longer to receive incoming faxes due to warm up of the machine. • If the LED is off , Power Sa ve mode deactiv ates and the machine keeps ready to oper ate with the minimum w arm- up time.
1.31 Getting Started Paper Save Mode (2-up) With P aper Save mode on, y ou can save paper by reducing the image size and printing two pages on one sheet of paper when copying or printing receiv ed documents. Press the Paper Save button on the front panel to turn this mode on or off .
1.32 Getting Started Toll Save Mode T oll Save mode allows y ou to save on the toll charges for telephone calls by tr ansmitting the document stored in memory during the time slot when the call charge is discounted.
Before the W orkCentre Pro 580 can interface with your computer , you must install driv er files. These drivers will enable your computer to properly communicate with the W orkCentre Pro 580 for printing and scanning. All of the necessary drivers are contained on the CD included with your W orkCentre Pro 580.
2.2 Installing Software System Requirements Proper operation of the W orkCentre Pro 580 requires that your personal computer meets or ex ceeds the following system requirements: Minimal requirements: .
2.3 Installing Software Installing the Software N OTE : For Windows 95/98 users, close “New Hardw are Found” screen when the computer boots up. 1 Insert the W orkCentre Pro 580 Driv er CD-ROM into your CD-ROM drive. The CD-ROM automatically starts and the opening window appears.
2.4 Installing Software 3 A confirmation screen appears. Click Back to change your selections or click Continue to proceed. 4 The installation will proceed, displa ying the progress screens. 5 When the installation is completed, The message bo x recommends you restart y our computer .
2.5 Installing Software Un-installing Software Un-installing is required if y ou are upgrading the software or if your installation fails. N OTE : Before beginning un-installation, ensure all applications are closed on your PC. A system reboot is required after the software is un-installed.
2.6 Installing Software 4 When un-installation is done, click OK . 5 R estart your computer manually to complete the un- installation..
This chapter explains how to send and receiv e faxes and make copies with the W orkCentre Pro 580. This chapter also demonstrates how to use the adv anced fax features and change the settings on the fax system. This chapter provides information on the following topics: • Setting up the WorkCentre Pro 580 3.
3.2 F ax and Copy Operations Setting up the WorkCentre Pro 580 Setting Volume Ringer Volume Y ou can adjust the volume of the ringer to the desired loudness. 1 In Standby mode, press or . The display shows the current ringer volume setting. 2 Press or repeatedly until you find the desired loudness.
3.3 F ax and Copy Operations Speaker Volume Y ou can adjust the volume of the speak er to the desired loudness. 1 Press the OHD/V.Req (Off hook dial/V oice request) button to adjust the speaker volume. If you cannot hear a dial tone, check the phone line connection.
3.4 F ax and Copy Operations Enter button for your desired selection. The display changes to “KEY VOLUME. ” 3 Press the Start/Enter button to access the K ey V olume menu. 4 Press or repeatedly to select ON or OFF . Press the Start/Enter button for your desired selection.
3.5 F ax and Copy Operations Setting User-Selectable Features Y our machine has various user -selectable features. These features are preset at the factory , but you may need to change them. T o find out how the features are currently set, print the System Data list.
3.6 F ax and Copy Operations Selectable Options N OTE : These instructions assume you’ve followed the steps listed in the previous procedure, “Setting User-Selectable Features, ” and the machine is prompting you to change one of the options listed below .
3.7 F ax and Copy Operations • SENDING CONFIRM : A message confirmation report showing whether the transmission w as successful, how many pages were sent, etc. , can be selected to print after each fax tr ansmission. Select ERROR to print only when an error occurs and the transmission w as not successful.
3.8 F ax and Copy Operations enabled, the data is divided and printed in actual siz e on two or more sheets. Select ON to enable. Note that this feature does not apply to the copy mode. Select OFF to turn this feature off . The overflow data will be printed out on a second page.
3.9 F ax and Copy Operations • STAMP RCV. NAME : Enabling the feature causes the machine to automatically print the page number , and the date and time of the reception at the bottom of each page of a receiv ed document. Select ON to enable. Select OFF to disable.
3.10 F ax and Copy Operations Select ON to turn on caller ID display . Select OFF to disable. Press or repeatedly to select on or off , press the Start/Enter button .
3.11 F ax and Copy Operations Y ou can easily suspend or change Distinctive Ring P attern Detection at any time. N OTE : Before using the Distinctive Ring P attern Detection option, Distinctive Ring service must be installed on y our telephone line by the telephone compan y .
3.12 F ax and Copy Operations Sending a Fax Preparing Documents for Faxing or Copying T o fax or copy documents that are printed on standard letter , legal or A4 size paper , follow these guidelines.
3.13 F ax and Copy Operations ACCEPTABLE DOCUMENTS (for ADF) N OTE : ADF stands for A utomatic Document F eeder . It allows you to stack original documents, which will be fax ed or copied one by one. Setting Document Resolution and Contrast It is recommended that you fax documents that were printed with a typewriter , black ink or toner .
3.14 F ax and Copy Operations Resolution By pressing the Resolution button repeatedly after loading a document, you can choose between ST ANDARD , FINE, or SUPER FINE modes. Contrast Press the Rcv. Mode/Contrast button to compensate for the brightness or darkness of y our faxed document.
3.15 F ax and Copy Operations Loading Documents 1 Place your document face down with the top edge going into the automatic document feeder . 2 Adjust the document guides for the width of the document. 3 Slide the sheet down into the automatic document feeder until it is gr asped and pulled into the machine.
3.16 F ax and Copy Operations Sending a Fax Automatically 1 After loading a document, enter the number of the remote fax using the keypad. One-touch or speed Dialing is also a vailable if you ha ve already programmed the number into a one-touch or speed dial number .
3.17 F ax and Copy Operations Automatic Redialing If the number you have dialed is busy or there is no answer , the machine will automatically redial the number ev ery three minutes up to a maximum of two times. The display shows “RETRY REDIAL?. ” If you want to redial the number immediately , press the Start/Enter button .
3.18 F ax and Copy Operations Y ou can also use an extension phone to call the remote machine. N OTE : For a successful fax tr ansmission, it is imperative that steps 3 and 4 occur in the proper order . 2 When finished talking, instruct the person at the remote location to press the start button on their fax machine.
3.19 F ax and Copy Operations Y ou can cancel a V oice R equest by pressing the OHD/ V.Req button again while you are sending or receiving a document. Answering a Voice Request When the phone rings after sending or receiving a fax, pick up the handset and answer it.
3.20 F ax and Copy Operations Receiving a Fax About Reception Modes Y our machine has five reception modes as described below: • FAX mode, the machine answers an incoming call and immediately goes into receive mode. • AUTO mode, the machine answers the incoming call.
3.21 F ax and Copy Operations Using the Distinctive Ring P attern Detection (DRPD), this machine “learns” the ring pattern you designate to answer the fax.
3.22 F ax and Copy Operations Receiving Automatically in FAX Mode Y our machine is preset to F AX mode at the factory . If you have changed the fax mode, tak e the following steps to receive fax es automatically: 1 Press and hold down the Rcv. Mode/Contrast button until the mode changes, release the button.
3.23 F ax and Copy Operations 3 If a fax signal is not sensed when the machine answers the call, you will hear a second ringing tone indicating a voice phone call. 4 Life the handset to answer the call. If the v oice call is not answered within a specified time, the machine will switch to automatic fax reception mode.
3.24 F ax and Copy Operations Receiving Automatically in ANS/ FAX Mode For this mode, y ou MUST attach an answering machine to the EXT. jack on the back of y our machine (see page 1.17). 1 Press and hold down the Rcv. Mode/Contrast button until the mode changes, release the button.
3.25 F ax and Copy Operations Receiving Manually in TEL Mode Y ou can answer voice calls using the handset, and receiv e faxes manually . 1 Press and hold down the Rcv.Mode/Contrast button until the mode changes, release the button. R epeatedly press the Rcv.
3.26 F ax and Copy Operations N OTE : The characters ‘ 9 ’ (star -nine-star) are preset at the factory as the default remote receiv e start code for machines with extension phones r ather than handsets. The asterisks in the code are fix ed characters, but the number can be changed.
3.27 F ax and Copy Operations Making a Copy Copying Overview The W orkCentre Pro 580 is a high quality copier which offers the following features: • Adjustable contrast : The contr ast can be changed to obtain the best copy quality for documents containing faint markings, dark image, photogr aphs, or other halftone images.
3.28 F ax and Copy Operations Making a Quick Copy T o make a quick copy without setting additional options: 1 Load the document with the print side facing down into the automatic document feeder until it is gr asped and pulled into the W orkCentre Pro 580.
3.29 F ax and Copy Operations Using Advanced Copy Features Y ou can select the quantity , reduction/enlargement, and collation for the printed copies. 1 Load the document face down into the automatic document feeder until it is gr asped and pulled into the machine.
3.30 F ax and Copy Operations Automatic Dialing Inserting a Pause With some priv ate telephone systems, you must dial an access code (9 for example) and listen for a second dial tone before dialing an outside number . In such cases, y ou must insert a pause in the telephone number .
3.31 F ax and Copy Operations One-Touch Dialing With One- T ouch dialing you can store numbers in any of the 20 one-touch buttons to automatically dial a number with a single press of the corresponding button. Storing a Number for One-Touch dialing 1 Press and hold one of the 20 one-touch buttons for about 2 seconds.
3.32 F ax and Copy Operations 5 T o program another one-touch number , enter the desired one-touch button and repeat steps 2 through 4. Or , to return to Standby mode, press the Stop button. Editing a Number for One-Touch Dialing 1 Press and hold the one-touch button for 2 seconds to select the desired phone number .
3.33 F ax and Copy Operations Using Address Label A One-touch label sheet is included with the W orkCentre Pro 580. As you store numbers in the one-touch dial locations, make a note of the numbers on the label to remind y ou which number is stored in each position.
3.34 F ax and Copy Operations Speed Dialing Y ou can store up to 80 numbers in two-digit Speed Dial locations (01-80). Storing a Number for Speed Dialing 1 Press and hold the Speed(#) button for about 2 seconds. 2 Enter a two-digit location number (01 through 80) to which you w ant to store a number , then press the Start/Enter button.
3.35 F ax and Copy Operations Or , to return to Standby mode, press the Stop button. Editing a Number for Speed Dialing 1 Press and hold the Speed(#) button for about 2 seconds. 2 Enter the two-digit location number for the desired phone number you w ant to edit, then press the Start/ Enter button .
3.36 F ax and Copy Operations Group Dialing (for Multi-Address Transmission) Multiple one-touch and speed dial numbers can be registered as a group. By using the group number , you can send a document to multiple numbers in a single oper ation. The machine will dial the remote numbers in stored sequence.
3.37 F ax and Copy Operations N OTE : If the button you chose has already been used for one-touch dialing or group dialing, the displa y warns that the one-touch number is used. Then you are allowed to select “O THER ” or “RENEW” by pressing or .
3.38 F ax and Copy Operations 11 Press the Start/Enter button . The display asks y ou to select a one-touch number for another group dial. 12 T o continue storing, press another one-touch button and repeat steps 4 through 11. 13 T o stop, press the Stop button.
3.39 F ax and Copy Operations Sending a Fax Using Group Dialing (Multi- Address Transmission) Y ou can use Group Dialing for the Delayed T r ansmission or Memory T ransmission. Follow the procedure of the desired oper ation (Broadcasting transmission - page 3.
3.40 F ax and Copy Operations ControlCentre Lite With ControlCentre Lite, you can set up one-touch dial or two-digit speed dial numbers in your computer and download the information to your machine. 1 Start Windows. 2 Click the Start menu, and select Programs from the Start menu.
3.41 F ax and Copy Operations 5 If necessary , press Read to get the numbers currently stored in your machine. The one-touch and/or speed dial numbers will be uploaded and displa yed in the Control Centre Lite dialog bo x. 6 Select the desired Phonebook number in the Phonebook list and click Edit .
3.42 F ax and Copy Operations Saving and Using Phonebooks Y ou can sa ve phonebooks, then open and write them to your W orkCentre Pro 580. This ma y be useful if you send to sever al different sets of faxes. N OTE : Use this procedure to save One- T ouch and Speed Dial information.
3.43 F ax and Copy Operations T ype an appropriate name for your phonebook, then click on Save . The phonebook will be stored on y our computer . 4 T o open a phonebook, click on File > Load Phonebook . When the following screen appears, select the desired phonebook, then click Open .
3.44 F ax and Copy Operations 2 Press or to scroll through the memory until y ou find the name and number you w ant. Pressing or allows you to search upw ard or downward through the entire memory in alphabetical order (from A to Z ).
3.45 F ax and Copy Operations Chain Dialing Chain dialing allows you to manually add a dialing prefix to any of your pre-progr ammed 20 One- T ouch numbers. By using chain dialing, you ma y enter a long distance code or access code then press the progr ammed one-touch number .
3.46 F ax and Copy Operations Advanced Fax Broadcasting With Broadcasting, documents are stored in memory and automatically sent to one or more remote stations. Use this feature to send your documents to multiple locations. Y ou can store a maximum of twenty one fax numbers for a memory tr ansmission.
3.47 F ax and Copy Operations the Start/Enter button . The stored number appears on the display . 5 Press the Start/Enter button to confirm the number . The display asks y ou to enter another fax number . 6 If you want to send to more than one location, repeat steps 4 and 5.
3.48 F ax and Copy Operations Delayed Fax Y ou can configure your W orkCentre Pro 580 to send a fax at a specified time. Up to 10 delay ed transmission oper ations can be reserved in y our machine. 1 Adjust the document guides to match the width of the document.
3.49 F ax and Copy Operations or , T o send to one location or when you complete the last fax number setting, press the Start/Enter button . N OTE : Y ou cannot use more than one Group dial number in a delayed fax. If y ou want to use a Group dial number , it must be the first location entered into the dela yed fax.
3.50 F ax and Copy Operations 11 The machine returns to Standby mode and the displa y alternates between messages to remind that y ou are in Standby mode and that a Dela yed T ransmission is set. N OTE : T o cancel the operation reserv ed in memory , see “Canceling a Scheduled Oper ation” on page 3.
3.51 F ax and Copy Operations • One-touch by pressing a one-touch button. • Speed dial using the Speed(#) button and a 2-digit speed dial number on the number k eypad, then press the Start/Enter button . The stored number appears on the display . N OTE : Y ou cannot use a group dial button with priority fax.
3.52 F ax and Copy Operations Polling What is Polling? P olling is used when one fax machine requests another to send a document. This is useful for sending unattended faxes. The person who w ants to receive the document calls the machine holding the original and requests that the document be sent.
3.53 F ax and Copy Operations 5 T o use a poll code, enter a 4-digit code (ex cept for 0000), then press the Start/Enter button . Or , If you do not want to secure the tr ansmission with a poll code, press the Start/Enter button when the display shows 0000 for the poll code.
3.54 F ax and Copy Operations Polling Reception With polling reception, you can receiv e documents from an unattended remote fax machine. N OTE : The remote machine must also support polling to use this feature. 1 Press the OHD/V.Req button or pick up the handset and when you hear a dial tone, dial the remote fax machine.
3.55 F ax and Copy Operations Adding Documents To a Scheduled Operation Y ou can add documents to a delayed transmission and polling transmission previously entered into memory .
3.56 F ax and Copy Operations Canceling a Scheduled Operation 1 Press the Advanced FAX button. The display shows the first menu; “BROADCASTING. ” 2 Press or until “CANCEL SCHEDULE” appears, and press the Start/Enter button . The display shows the operation, time and number currently reserv ed in the memory .
3.57 F ax and Copy Operations Additional Functions Sending a Flash Some special phone services require a switch-hook signal for proper oper ation. F or example, if y ou hav e call-waiting, you can put a call on hold and take a second call on the same line by pressing the Flash/Status button.
3.58 F ax and Copy Operations Monitoring a Dual Job Status The W orkCentre Pro 580 can perform more than one function simultaneously . For example, y ou can; • R eceive a fax into the memory while making a cop y . • Store a fax document for later tr ansmission while printing an incoming fax.
3.59 F ax and Copy Operations N OTES : • If a number has already been progr ammed for fax forwarding, the displa y shows that number . T o edit the number , see page 3.60. • Y ou cannot use Group dial numbers for forwarding a fax. 3 Confirm you hav e entered the correct number in the display , press the Start/Enter button .
3.60 F ax and Copy Operations N OTES : • If an error occurs during forw arding a fax, your machine will automatically redial the number ev ery three minutes up to a maximum of two times, just lik e normal fax operation.
3.61 F ax and Copy Operations Toll Save Faxing The T oll Sa ve F ax feature can sav e telephone toll charges by storing the document in memory and sending it at the specified time during the off peak time slot, which is a period of time when the toll charge for the telephone call is reduced.
3.62 F ax and Copy Operations N OTE : When turned on, the T oll Sav e feature will use the last programmed time. If y ou want to send at a different time, change the time following the steps “Setting Time for T oll Save F ax. ” 3 Enter the number of the remote machine using the ten number keypad.
3.63 F ax and Copy Operations Printing Reports Y ou can print help and reports containing useful information. N OTE : Lists that print out automatically will not print if there is no paper loaded or a paper jam has occurred. To Print Lists 1 Press Report/Help on the front panel.
3.64 F ax and Copy Operations Sending Confirmation Shows the fax number , the number of pages, elapsed time of the operation, the communication mode, and the communication results for the last tr ansmission. This confirmation report can also be set to print in one of the following ways according to y our setting in S ystem Setup (see page 3.
R ead this chapter to learn how to select and load print media and how to use the print settings. The topics included in this chapter are: • Print Media Selecting Print Media 4.2 Using the Automatic P aper F eeder 4.4 Using the Manual P aper Feeder 4.
4.2 Printing Print Media Selecting Print Media The type of media you select affects the performance and print quality . Selecting Media Types Most photocopy paper , postcards, index cards, transparencies, en velopes, and labels will work with y our printer , particularly paper that is marked for use in laser printers.
4.3 Printing Get the Right Paper Y our machine is designed to work well on most common office paper types and with qualit y 25% cotton bond paper . Because your printer uses toner to produce an image, paper that accepts toner produces the best results.
4.4 Printing • Executive :7.25 by 10.5 in; 184 by 267 mm • No.10 Envelopes :4.12 by 9.5 in; 105 b y 241 mm • DL. Envelopes :4.33 by 8.66 in.; 110 b y 220 mm • C5 Envelopes :6.38 by 9.01 in.; 162 b y 229 mm • C6 Envelopes :4.49 by 6.38 in.; 114 b y 162 mm • B5 Envelopes :6.
4.5 Printing 2 Prepare the print material for loading. • For paper: Flex or fan the paper back and forth. Do not fold or crease the paper . Straighten the edges on a lev el surface. • F or transparencies: - Hold the transparencies b y the edges and avoid touching the print side.
4.6 Printing • Load transparencies facing forward with the adhesive strip on top going into the tray first . • Load letterhead paper facing forward with the top of the page going into the tray first . 4 Slide both paper guides to fit against the paper’ s edges.
4.7 Printing Using the Manual Paper Feeder T o load a single env elope, card stock, or specialty paper , use the manual paper feeder . When you use the manual feeder , you must feed one piece of media at a time.
4.8 Printing • Load the env elope with the flap side facing away from you . The end of the en velope with the stamp area must enter the feeder first. N OTE : Do not feed stamped env elopes. The stamp is shown in the previous illustr ation for reference only .
4.9 Printing 3 Press the Start/Enter button to start manual feeding. If you hav e more than one page to print, press the Start/ Enter button for each page.
4.10 Printing Specialty Paper Guidelines • R ead all instructions that come with special paper for important information regarding how to achiev e the highest print quality . • It is recommended to feed one sheet at a time for special paper types.
4.11 Printing Printing Printing a Document The following procedure describes the steps required to print from various Windows applications. The exact steps for printing a document may v ary depending on the application program. Refer to your software application’ s documentation for the exact printing procedure.
4.12 Printing 3 T o take adv antage of the printer features provided by the W orkCentre Pro 580, click Properties in the application’ s Print dialog box and go to step 4. If you see Setup , Printer , or Options , click that button instead. Then click Properties in the next screen.
4.13 Printing 5 If you want to change the setting for print quality , click the Graphic tab. 6 When you finish changing print settings, click OK until you see the Print dialog bo x again.
4.14 Printing N OTES : • Most Windows applications will o verride settings you specify in the printer driver . Change all print settings av ailable in the software application first, and an y remaining settings with the printer driv er . • The settings you change here remain in effect while y ou are using the current progr am.
4.15 Printing Printing Help The W orkCentre Pro 580 printer driv er has help screens that can be activ ated from the Help button in the printer properties dialog box. These help screens giv e detailed information about the printer features pro vided by the W orkCentre Pro 580 driv er .
4.16 Printing 4 Click Print Page Borders when you w ant each page image in your document to print with a border . 5 Click OK , then start printing. Scaling Your Document With this printer feature you can scale y our print job on a page. 1 Access the W orkCentre Pro 580 printer driver properties.
4.17 Printing Y ou can also click the or buttons. 4 Click OK , then start printing. Fitting Your Document To a Selected Paper Size With this printer feature you can scale y our print job to any selected paper size regardless of the digital document siz e.
4.18 Printing 2 Click the Output tab, and select Fit to Page in the Type drop down list under the Output Mode section. 3 Y ou’ll see the Application page size and be prompted to select Fit to P aper Size. Select the correct size from the drop-down list.
4.19 Printing Printing Posters With this feature you can print a single-page document on up to 16 sheets of paper which can be pasted together to form one poster-size document. 1 Access the W orkCentre Pro 580 printer driver properties. See page 4.11 to access the printer properties.
4.20 Printing For example, if y ou select 2x2, the output will be automatically stretched to cov er 4 physical pages. 4 Y ou may specify an overlap in millimeter or inch to make it easier to reconstruct the resulting poster . 5 Click OK , then start printing.
4.21 Printing Printing Watermarks With the W atermark option you can print text over an existing document. For example, you may want to have large gra y letters reading “Draft” or “Confidential” printed across the first page or all the pages of a document.
4.22 Printing To create or edit a watermark 1 Access the W orkCentre Pro 580 printer driver properties. See page 4.11 to access the printer properties. 2 Click the Watermark tab, and enter the desired text message in the T ext field. This will be display ed in the preview window .
4.23 Printing 5 If you want to edit, select the desired w atermark from the list, edit the watermark, then click Update . 6 When you complete the edit, click OK , then start printing. T o stop printing the watermark, select None in the Message drop-down list.
4.24 Printing your compan y’s letterhead, y ou do not need to load preprinted letterhead paper in the printer . Y ou need only to tell the printer to print the letterhead o verlay on your document. Creating a New Page Overlay T o use a page overla y , you must create a new page o verlay containing your logo or image.
4.25 Printing 4 In the Create Overla y dialog box, type a name of up to eight characters in the File name bo x. Select the destination path if necessary . 5 Click Save . Y ou will see the name in the Overlay List box. 6 Click OK on the Overlays box, then click OK in the print dialog box, then click OK on the “Create Ov erlay” message box.
4.26 Printing 4 If the desired overla y file does not appear in the Ov erlay List bo x, click Load Overlay , and select the ov erlay file. If you hav e stored the overla y file you want to use into an external source, you can also load the file when y ou access this Load Overla y window .
4.27 Printing The selected overla y will be downloaded with your print job and printed on your document. Deleting a Page Overlay Y ou can delete page overlays that are no longer used. 1 In the W orkCentre Pro 580 printer properties dialog bo x, click the Overlays tab.
4.28 Printing Printing in a Network Environment If you work in a network en vironment, you can connect the W orkCentre Pro 580 directly to a selected computer (called the “host computer”) on the network. The printer can then be shared by other users on the network through a Windows 9x, 2000 or NT 4.
4.29 Printing Setting Up Client PC 1 Right-click the Start menu, and select Explorer . 2 Open your network folder in the left column. 3 Right-click the shared name, and select Capture Printer Port . 4 Select the port you w ant, check the Reconnect at log on box, then click OK .
4.30 Printing.
This chapter pro vides information for maintaining the high-quality and economical oper ations of the W orkCentre Pro 580 and the laser printer cartridge. The topics included in this chapter are: • Guidelines for Maintenance 5.2 • Clearing Memory 5.
5.2 Maintenance Guidelines for Maintenance For optimal performance of y our machine, follow these guidelines: • Place the machine on a stable surface. • Do not install your machine near devices that contain magnets or gener ate magnetic fields, such as speakers.
5.3 Maintenance • JOURNAL : clears all records of tr ansmissions & receptions. • DEFAULT SETUP : restores all the option settings to factory default. 3 Press or until you find the item y ou want to clear , then press the Start/Enter button. The display prompts you to confirm y our selection.
5.4 Maintenance Adjusting Shading If the scanning unit becomes dirty , it can alter the shading value. If the documents y ou are sending or copying ha ve black lines or are blurred, adjust the shading setting. 1 Clean the scanner (see page 5.8). T est again, if the copy qualit y is still poor , proceed with steps 2 through 5.
5.5 Maintenance 2 Press or until “MAINTENANCE” appears, then press the Start/Enter button. The display shows the first menu; CLEAN DRUM. 3 Press or until you find “REMO TE TEST” , then press the Start/Enter button. 4 Press or to turn this feature ON or OFF , then press the Start/Enter button.
5.6 Maintenance 4 Press or to turn this feature ON or OFF , then press the Start/Enter button. 5 Press the Stop button to return to Standby mode. N OTE : A technician is required to program information for this feature to work.
5.7 Maintenance Cleaning the Machine T o maintain optimum print quality , follow the cleaning procedures below every time the laser printer cartridge is replaced or whenever print qualit y problems occur . Always keep your the W orkCentre Pro 580 free from dust and debris.
5.8 Maintenance N OTE : T o prevent damage to the laser printer cartridge, do not expose it to light for more than a few minute. Co ver it with a piece of paper . 3 With a dry , lint-free cloth, wipe aw ay any dust and spilled toner from the laser printer cartridge area and the laser printer cartridge cavit y .
5.9 Maintenance 3 Wipe the roller surface with a soft cloth dampened with water . 4 Using a cotton swab or a soft, dry cloth, clean the ADF rubber piece. 5 Carefully wipe the scanning glass with a soft, dry cloth. If the glass is very dirt y , first wipe it with a slightly dampened cloth, then with a dry cloth.
5.10 Maintenance 6 R eplace the roller in reverse order , and then close the control panel firmly until it clicks into place. 7 P erform the shading adjustment.
5.11 Maintenance Caring for the Laser Printer Cartridge Expected Cartridge Life The life of your laser printer cartridge depends on the amount of toner (density) used in each print job.
5.12 Maintenance 1 Open the front cov er by pulling the cover release buttons on both sides of the W orkCentre Pro 580 towards you. 2 R emove the old laser printer cartridge b y slightly lifting up then pulling towards y ou. 3 Unpack a new laser printer cartridge from its plastic bag, and then carefully remov e the protective cov er sheet.
5.13 Maintenance C AUTION : Do not touch the green photoreceptor drum. Scratches or smudges that appear on the photoreceptor will result in poor copy quality and ma y shorten the life of the laser printer cartridge. 4 Shake the laser printer cartridge from side to side 5 or 6 times to distribute the toner ev enly .
5.14 Maintenance Automatic Document Feeder Rubber Pad Replacement Y ou can purchase the ADf Rubber Pad from X erox service or your authorized X erox service provider . 1 Open the Control P anel Cover . 2 Insert a small flat blade screwdriv er into the slots at the lower right and left sides of the ADF Holder .
This chapter describes troubleshooting for the following areas. • Clearing Jams 6.2 • LCD Error Messages 6.7 • Fax Problems 6.10 • General Printing Problems 6.
6.2 T roubleshooting Clearing Jams Document Jams While Sending a Fax If a document jams while you are sending it, “DOCUMENT JAM” appears on the displa y . Do not pull the document out of the feeder , this could damage your W orkCentre Pro 580. 1 Open the control panel by lifting the panel at the top edge.
6.3 T roubleshooting 3 Close the control panel firmly until it clicks into place. Paper Jams While the Machine is Printing By carefully selecting the paper t ype and loading it properly , you should be able to a void most paper jams. If paper jams occur , an error message appears in the displa y .
6.4 T roubleshooting IF P APER JAMS IN THE P APER EXIT AREA 1 If the paper jams as it exits the W orkCentre Pro 580 paper exit tra y and most of the paper is visible, gently pull the paper str aight out. N OTE : If there is any resistance when y ou pull the paper , and it does not mov e easily when you pull, stop pulling.
6.5 T roubleshooting 2 R emove the laser printer cartridge. W ARNING : The fuser is hot. Use caution when remo ving the jammed paper . 3 Using both hands, gently pull the paper tow ards you. 4 Check that there is no other paper jammed inside the W orkCentre Pro 580.
6.6 T roubleshooting Tips for Avoiding Paper Jams By carefully selecting print materials and loading them properly , you should be able to avoid most paper jams. If jams do occur , follow the steps outlined in “Clearing Jams” starting on page 6.2.
6.7 T roubleshooting LCD Error Messages Display Meaning Solution DOCUMENT JAM The document has jammed in the automatic document feeder . Refer to “Clearing Jams” in the beginning of this chapter for instructions on how to remove an y paper . DOOR OPEN The front cover is not securely latched.
6.8 T roubleshooting MEMORY FULL The memory is full. Either delete unnecessary documents, or retransmit after more memory becomes av ailable, or split the transmission into more than one operation. NO ANSWER The remote machine has not answered and all the redial attempts have been made.
6.9 T roubleshooting POWER F AILURE A power failure has occurred. If documents have been stored in the memory , a ‘Power F ailure Report’ will be automatically printed when the power is restored. RECEIVE ERROR A fax has not been received successfully .
6.10 T roubleshooting Fax Problems Symptom Cause and Solution The machine is not working, there is no display and the buttons are not working. • Unplug the power cord and plug it in again. • Check for power at the outlet. No dial tone. • Check that the phone line is connected properly .
6.11 T roubleshooting Blank spaces or poor text quality appear in incoming faxes. • The machine sending you the fax may be faulty . • The fax machine sending you a fax may ha ve a dirty scan glass. • Line errors due to excessive noise on the phone line.
6.12 T roubleshooting General Printing Problems Problem Possible Cause and Remedy Y our machine does not print. • A paper jam has occurred. Remov e the jammed paper . See page 6.2. • The laser printer cartridge is not installed properly . Remove and reinsert the laser printer cartridge.
6.13 T roubleshooting Half of the page is blank. • The page layout is too complex. Simplify the page layout and remov e any unnecessary graphics from the document. • The page orientation setting may be incorrect. Change the page orientation in the Printer Properties or Print Setup dialog box.
6.14 T roubleshooting Print Quality Problems Problem Possible Cause and Remedy Light or faded print If a vertical white streak or faded area appears on the page: • The toner supply is low . Install a new laser printer cartridge. • The paper may not meet paper specifications (for example, the paper is too moist or too rough).
6.15 T roubleshooting Dropouts If faded areas, generally rounded, occur r andomly on the page: • A single sheet of paper may be defective. T ry reprinting the job. • The moisture content of the paper is uneven or the paper has moist spots on its surface.
6.16 T roubleshooting V ertical repetitive defects If marks repeatedly appear on the printed side of the page at even interv als: • The laser printer cartridge may be damaged. Print a cleaning sheet several times by cleaning the OPC drum (see page 5.
6.17 T roubleshooting Page sk ew • Check the paper type and quality . See “Print Media” on page A.7. • Make sure that the paper or other media is loaded correctly and the guides are not too tight or too loose against the paper stack. Curl or wav e • Check the paper type and quality .
6.18 T roubleshooting Black pages • The laser printer cartridge may not be installed properly . Remove the cartridge and reinsert it. • The laser printer cartridge may be defective and need replacing. Install a new laser printer cartridge. • The printer may require repairs.
6.19 T roubleshooting Resetting the Machine If you are experiencing problems or the machine locks up , you may need to reset the machine. Use the following instructions to reset and reboot the machine. N OTE : This programming sequence must be performed within 1.
6.20 T roubleshooting This page intentionally left blank..
• Specifications A.2 • Print Media A.7 • FCC Regulations A.11 • Data Coupler Information A.12 • Canadian Certification A.14 • Radio Frequency Emissions A.
A.2 Appendix Specifications Items Specification General Size (WxDxH) w/o Hand Set 370 x 356 x 195 mm 14.5 x 14 x 7.7 in. W eight 7.7 Kg, 17 lbs. LCD 16 x 1 Char . Interface Par allel IEEE 1284 Bidirectional Power Power S witch No Input V oltage 110V~127V 50 / 60 Hz Current 2.
A.3 Appendix Print Manual Feed Rear to Front Halftone 64 levels Operating System Windows 95/98/ ME, Windows NT/ 2000 Scan Scan Method Contact Image Sensor , Monochrome Quick Scan Speed 3 seconds Fine Mode Speed 6 seconds Resolution (Optical) 300 x 300 dpi Scan Width Maximum 8.
A.4 Appendix Copy Reduction / Enlargement 50 - 200% Multi Copy 1 - 99 pages Telephone Handset Ye s 1- T ouch Dial 20 EA Speed Dial 80 EA T elephone Answering Device No T elephone Answering Device Inte.
A.5 Appendix Fax Superfine Resolution 300 x 300 dpi Contrast Normal Darken Lighten Photo Halftone 64 levels Memory Capacity 2 MB (160 pages)* Battery Backup Y es (Max 30Min) Automatic Paper Feeder T y.
A.6 Appendix Automatic Document Feeder Input Capacity 20 sheets Paper W eight 12.5 - 28 lbs. Consumables Starter Cartridge 1,000 pages @ 5% cover age Laser Printer Cartridge 2500 Pages @ 5% cover age .
A.7 Appendix Print Media Selecting Print Media Satisfactory print and receive qualit y can be obtained with many types of plain paper . Since the quality of plain paper varies widely , test the print quality before buying large quantities of paper .
A.8 Appendix • Size. Choose any size paper that fits easily within the paper guides of the printer . • Weight. Use 20~24-pound or 75~90 g/m 2 plain paper for multipurpose, everyda y use. • Brightness. Some papers are whiter than others and produce sharper , more vibrant colors.
A.9 Appendix Do not use the following types of paper with the WorkCentre Pro 580: • Highly textured stock, such as linen, ma y not print evenly because the toner can bleed. • Extremely smooth, shin y , or coated papers not specifically designed for laser printers can jam the printer and repel toner .
A.10 Appendix Specialty Paper Guidelines • R ead all instructions that come with special paper for important information regarding how to achiev e the highest print quality . • It is recommended to feed one sheet at a time for special paper types.
A.11 Appendix Safety Information FCC Regulations Send Header Requirements Feder al Communications Commission (FCC) regulations require all persons within the United States who send an y message via a facsimile machine to include an identif ying message in the tr ansmission.
A.12 Appendix Data Coupler Information This X erox W orkCentre Pro 580 machines contains an internal data coupler . Its use is restricted by the FCC (F ederal Communications Commission). T o comply with the FCC rules, you must carefully read and follow the instructions listed below .
A.13 Appendix R epairs to the machine should be made only by a X erox representative or an authoriz ed Xero x service agency . This applies at any time during or after the service w arr anty period. If unauthorized repair is performed, the remainder of the warr anty period is null and void.
A.14 Appendix Canadian Certification Notice: The Industry Canada label on this system identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, oper ational, and safety requirements.
A.15 Appendix This digital appar atus does not exceed the Class B limits for radio noise emissions from digital appar atus set out in the Radio Interference R egulation of Industry Canada.
A.16 Appendix Radio Frequency Emissions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to pro vide reasonable protection against harmful interference in a residential installation.
A.17 Appendix Laser Safety Caution: Use of controls or adjustments or performance of procedures other than those specified herein ma y result in hazardous exposure to laser light.
A.18 Appendix This page intentionally left blank..
I NDEX A adding documents 3-55 address label, using 3-33 adjusting shading 5-4 alert tone, setting 3-3 altitude correction 4-13 attaching answering machine 1-17 extension phone 1-17 automatic dial one.
E entering, alphanumeric characters 1-27 error messages 6-7 F fax forwarding 3-58 fax problem, solving 6-10 features 3-5 fitting document to selected paper 4-17 G group dialing 3-36 H handset, inserti.
paper orientation, setting 4-12 paper save mode 1-31 paper size, setting 4-12 paper source, setting 4-12 paper type, setting 4-12 parallel, connection 1-18 pause, inserting 3-30 phone line, connection.
T tape, removing 1-14 toll save faxing 3-61 toner save mode 1-29, 4-13 trays, attaching 1-15 troubleshooting 6-1 U uninstall MFP driver 2-5 user-selectable options 3-6 V voice request 3-18 volume, set.
Een belangrijk punt na aankoop van elk apparaat Xerox Pro 580 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Xerox Pro 580 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Xerox Pro 580 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Xerox Pro 580 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Xerox Pro 580 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Xerox Pro 580 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Xerox Pro 580 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Xerox Pro 580 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
