Gebruiksaanwijzing /service van het product RS2 van de fabrikant Yale
Ga naar pagina of 18
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
ii SAFETY PRECAUTIONS Each Y ale RS2 Manually Lever Operated Hoist is built in accordance with the specifications contained herein and at the time of manufacture complies with our interpretation of applicable sections of *ASME B30.21, *ANSI/ASME HST - 3M and the Occupational Safety and Health Act-1970.
iii 1 CHOOSE THE RIGHT HOIST FOR THE JOB... Choose a Y ale Lever Hoist with a capacity f or the job. Know the capacities of your hoists and the weight of your loads.
SPECIFICA TIONS The Y ale RS2 Lever Hoist is a highly versatile manually lever operated chain hoist that can be used to efficiently pull, lift, drag or stretch. S tandard features of the hoist include: • Alloy steel liftwheel to reduce chain wear . • Hoistaloy ® load chain for long and dependable service.
2 Regardless of how the hoist is used, make sure that the upper hook is firmly attached to a support or anchor that has sufficient strength to hold several times the rated load of the hoist.
3 4. Pull on hook side and loose end side of load chain to make sure chain feeds freely into and out of the hoist. 5. Grasp unit by frame or upper hook and pull on end ring or lower hook to pull the chain through hoist to the length required to attach lower hook to load.
4 load the unit, then check to be sure that the attachments to the hooks and load are firmly seated. Continue movement only after you are assured the load is free of all obstructions. The hoist has been designed for hand powered operation only . Do not use an extension on the lever .
5 Inspection of hoists is divided into two general classifications designated as “frequent” and “periodic”. Frequent Inspections These inspections are by the operator or other designated personnel. Frequent inspections are to be performed daily or prior to each use and they are to include the following: A.
6 Also check chain for stretch using a vernier caliper as shown above. Select an unused, unstretched section of chain (usually at the loose end) and measure and record the length over 1 1 chain links (pitches). Measure and record the same length on a worn section of chain.
When lubricating parts adjacent to the brake, DO NOT use an excessive amount of lubricant which could seep onto the brake surfaces. EXTERIOR FINISH The exterior surface of the RS2 Lever Hoist has a durable, scratch resistant baked powder coating. Normally , the exterior surfaces can be cleaned by wiping with a cloth.
8 J. Assemble pawls (673-19) to pawl shaft s (673-22) and secure with snap rings (673-32). Place pawl springs (673-21) on pawl shaft s and insert these assemblies into frame (673-2). K. Slide friction hub (673-12) onto pinion (673-9) and place one friction disc (673-13) on top of friction hub.
screw . If screw has been removed and replaced, always use new spots for locking. On the 3 ton unit, hang it in the vertical position. Making sure there are no twists in the chain, feed the end of chain thru the hook block (673-71) and around lower sheave (637-70).
KEY NO. P ART NAME P ART NUMBER NO. REQ’D. 3/4 TON 1 1/2 TON 3 TON 673-1 1 Liftwheel Bearing 88645 88442 673-2 1 Frame (includes 673-3 and (4) 673-4) 73304Y 73331Y 673-3 1 Pinion Bearing, frame end .
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
Een belangrijk punt na aankoop van elk apparaat Yale RS2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yale RS2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yale RS2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yale RS2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yale RS2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yale RS2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yale RS2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yale RS2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
