Gebruiksaanwijzing /service van het product DVD-S795 van de fabrikant Yamaha
Ga naar pagina of 48
DVD/Video CD/CD Player DVD - S795 Operating Instructions Before attempting to connect, operate or adjust this product, please read this Operating Instructions manual completely and save this manual for future reference.
2 Safety information Note: This player can be used only where the power supply is AC 120 V, 60 Hz. It cannot be used elsewhere. CAUTION: DVD/VIDEO CD/CD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD/VIDEO CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPO- SURE IF DIRECTED.
3 Getting Started FCC INFORMATION (for U.S.A) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the in- structions contained in this manual, meets FCC require- ments. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
4 Dear Customers May we take this opportunity to thank you for purchasing this YAMAHA DVD/Video CD/CD player. We strongly recommend that you carefully study the Operating Instructions before attempting to operate the player and that you note the listed precautions.
5 Getting Started Basic Operation Operation Using On-Screen Menu Icons Advanced Operation Initial Settings For Your Reference Table of contents Getting Started: Safety information . . . . . . . . . . . . . . . . . . . . . 0 2 Precautions . . . . . . .
6 Features È High picture quality Á 10 bit video D/A converter With its 10 bit capability, this D/A converter reproduces fine images faithfully. Á Component video output When used with a compatible.
7 Getting Started Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.
8 Remote control unit Page e POWER button ( * /I) . . . . . . . . . . . . . . . . . . . . . . . . . . 14 f STOP button ( @ ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 g SKIP buttons ( H , I ) . . . . . . . . . . . . . . . . . . . .
9 Getting Started Front panel FL display e Rotates during play. Rotates fast clockwise or counterclockwise during rapid advance (reverse). (See page 17.) Rotates slowly clockwise or counterclockwise during slow-motion play. [DVD/Video CD] (See page 17.
10 Connection Á Ensure that this player and other equipment to be connected are set to the standby mode or off, and disconnect the AC cord, before commencing connection. Á Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
11 Getting Started Dust protection cap Component video output connectors (Y, C B , C R ) The component video output connector outputs the color dif- ference signals (C B , C R ) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors.
12 Connection Connecting to an AV amplifier which does not contain Dolby Digital or dts (digital theater systems) decoder This DVD/Video CD/CD player contains a Dolby Digital decoder.
13 Getting Started Remote control unit preparation Battery installation A Insert the batteries while observing the correct ( o ) and ( p ) po- larities as illustrated at left. Service life of batteries Á The batteries normally last for about one year although this depends on how often, and for what operations, the remote control unit is used.
14 POWER @ STOP TITLE SUBTITLE MARKER ANGLE AUDIO ON SCREEN RETURN MENU SELECT H SKIP IF G D PLAY g STILL/PAUSE OPEN/CLOSE * / I POWER * / I @ STOP TITLE RETURN D PLAY OPEN/CLOSE H SKIP I PLAY MODE RE.
15 Basic Operation Á When the disc tray is closed by pressing OPEN/CLOSE, press PLAY to start play. Á When a menu screen appears on the TV monitor In case of an interactive DVD or a Video CD with playback con- trol, a menu screen appears on the TV monitor.
16 Skipping ahead or back Press SKIP ( H , I ) during play. H : Reverse direction I : Forward direction For your reference: Á A chapter (DVD) or a track (Video CD/CD) is skipped each time the button is pressed. Á When SKIP ( H ) is pressed once midway through a chap- ter/track, play returns to the start of that chapter/track.
Basic Operation 17 Rapid advance (Rapid reverse) By the remote control unit Press SLOW/SEARCH ( F , G ) during play. On the main unit Press SEARCH ( F , G ) during play. Á The speed of advance (reverse) is relatively slow at first. When the button is pressed again, the speed becomes fast- er.
18 18 General information about On- Screen Menu Icons This player features On-Screen Menu Icons providing various functions. A “banner” will be displayed on the TV monitor by pressing the ON SCREEN button on the remote control.
Operation Using On-Screen Menu Icons 19 1 1:56:37 1 ENG 48k 16b LPCM 1 1 1 ENG ON Detailed descriptions of each On-Screen Menu Icon Screen for disc information (For DVD) Chapter No. Change the chapter No. by using the cursor buttons ( A , B ) or the numeric buttons and press SELECT.
20 20 1 3:37 L R OFF PBC Playback control (Video CD only) (See page 15.) OFF Menu play is not ON. ON Menu play is ON. Detailed descriptions of each On-Screen Menu Icon Screen for disc information (For Video CD/CD) Track No. Change the track No. by using the cursor buttons ( A , B ) or the numeric buttons and press SELECT.
Operation Using On-Screen Menu Icons 21 OFF ＊＊＊＊＊ 0 dB N OFF OFF Screen for player information Notes: Á Repeat play and marker functions do not work with an interactive DVD or during menu play of a Video CD with playback control. Á A-B repeat play does not work with an interactive DVD.
22 22 µ 100 p 100 For your reference: Á Each time the cursor button ( C , D ) is pressed, the speed of rapid reverse/advance and slow-motion play increases up to 5 steps. Á The figures appearing at both ends of the shuttle screen stand for the maximum speeds of rapid reverse and rapid advance.
Operation Using On-Screen Menu Icons Advanced Operation 23 Repeat play Repeat viewing (listening) Press REPEAT during play. Each time this button is pressed, the TV monitor changes as shown below and the disc will repeat a chapter or title (DVD) or a track (Video CD/CD).
24 24 Repeat play To enjoy program repeat play If REPEAT is pressed during program play (see page 25), the display changes as follows: Program play Repeat of programmed track being played Repeat of all programs Cancel repeat mode (Program play) To return to program play Press REPEAT several times until “ ' OFF” is displayed.
Advanced Operation 25 The player plays the tracks on the disc in an order you specify. 1 Press PLAY MODE in the stop mode. The program playback screen appears on the TV monitor. Á To exit the screen Press PLAY MODE twice. 2 Press the cursor buttons ( A , B , C , D ) to select the preferred track number.
26 26 Random play [Video CD/CD] The player plays the tracks on the disc in random order. 1 Press PLAY MODE twice in the stop mode. The random playback screen appears on the TV monitor. Á To exit the screen Press PLAY MODE once. 2 Press PLAY. Play now begins in random order.
Advanced Operation 27 Storing markers in memory to be viewed (listened to) again Recalling/clearing a marker 1 Press MARKER during play. 2 Press the cursor buttons ( C , D ) to select the marker to be recalled/cleared. 3 Press the cursor button ( A ) to recall a mark- er.
28 28 Changing subtitle language [DVD] It is possible to change the subtitle language to a different language from the one selected at the initial settings. (If available. See page 31.) (This operation works only with discs on which multiple subtitle languages are recorded.
Advanced Operation 29 Viewing from another angle [DVD] Some DVDs may contain scenes which have been shot simul- taneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button.
30 30 Initial set tings Once the intial settings have been completed, the player can always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory, until the settings are changed, even after switching to standby mode.
Initial Settings 31 Selecting disc languages [DVD] This is to select the audio soundtrack language, subtitle lan- guage and the language used in title menus or DVD menus which will always be used for every disc to be played back.
32 32 Initial settings Selecting rating level [DVD] This is to disable the playing of specified DVDs which are un- suitable for children. Á Some DVDs are encoded with a specific rating level. If the rating level of the disc is higher than that preset in the initial settings operation, playback of the disc will be prohibited.
Initial Settings 33 4 Press SELECT. Setting is finished and the initial settings screen is displayed. Á The rating is locked. Any discs whose rating is higher than the setting cannot be played back unless the correct pass- word is entered.
34 34 Initial settings Selecting the display format of the On-Screen Display You can select whether “Play”, “Still” and other displays will be displayed or not, and the color and position of “Play”, “Still” and other displays as well as On-Screen Menu Icons.
35 Initial Settings The screen illustrated in step 1 is displayed. Select “0” by using the cursor buttons ( A , B ) and press SELECT to return to the initial settings screen.
36 Initial settings Selecting TV screen type Select the TV aspect, conventional size screen (4:3) or wide- screen (16:9), and the TV type according to your TV set. 1 At the initial settings screen (on page 30) Press the cursor buttons ( A , B ) to select “6 TV Aspect” and press SELECT.
37 Initial Settings Á The images which appear on the TV screen, and what each screen mode is called, may differ depending on the manufacturer of the TV set or on the type of the TV set.
38 Initial settings Selecting digital output Select the digital output to be output from the optical/coaxial digital audio output connector of the player. 1 At the initial settings screen (on page 30) Press the cursor buttons ( A , B ) to select “7 Digital Audio Output” and press SELECT.
39 Initial Settings 3 Press the cursor buttons ( A , B ) to select the preferred value and press SELECT. When “1 LPCM 96k > 48k” is selected 1 No: Digital audio of 48 kHz/16 bit is output during playback of the DVD recorded in Linear PCM of 48 kHz.
40 Initial settings Speaker settings 1 At the initial settings screen (on page 30) Press the cursor buttons ( A , B ) to select “8 Speaker Setting” and press SELECT. Á Underlined item is a factory preset. 2 Press the cursor buttons ( A , B , C , D ) to select the preferred item and press SELECT.
41 Initial Settings Delay time: If the surround speakers or the center speaker can not be installed at an equal distance to the front speakers from the listening position, change the delay time to get better surround effect. Á When D2 or D3 is equal to or larger than D1, no setting is necessary.
42 Initial settings Other settings Compression of the sound’s dynamic range and other special settings can be performed. 1 At the initial settings screen (on page 30) Press the cursor buttons ( A , B ) to select “9 Other Settings” and press SELECT.
43 Initial Settings When “2 Audio during Search” is selected 1 On: Audio from 6CH DISCRETE or MIXED 2CH out- put connectors will be heard during search at the initial scan speed. (Factory preset) 2 Off: Select this setting when audio during search at the initial scan speed is not desired.
44 Language code list Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menus” (see page 31). Code 6565 6566 6570 6577 6582 6583 6588 6590 6665 6669 66.
45 Initial Settings For Your Reference Disc handling and maintenance Handling precautions Á Hold the disc by the edges so the surface will not be soiled with fingerprints. ( A ) Fingerprints, dirt and scratches can cause skipping and dis- tortion. Á Do not write on the label side with a ball-point pen or other writing utensils.
46 If the player fails to operate normally, check the following points to determine whether the fault can be corrected by the simple mea- sures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the AC cord and contact your authorized YAMAHA dealer or service center for help.
47 For Your Reference Á If the service number fails to be cleared even when the remedial action is taken, ask the service technician to repair the player. Symptom (DVD) Remedy Symptom (Video CD) Remedy No menu play. This function works only for Video CDs with playback control.
48 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.
Een belangrijk punt na aankoop van elk apparaat Yamaha DVD-S795 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha DVD-S795 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha DVD-S795 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha DVD-S795 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha DVD-S795 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha DVD-S795 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha DVD-S795 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha DVD-S795 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
