Gebruiksaanwijzing /service van het product GX707VCD van de fabrikant Yamaha
Ga naar pagina of 53
RL T DISC 3 OPEN / CLOSE DISC CHANGE DISC 2 DISC 1 DIGITAL VIDEO VIDEO CD Version 2.0 / Playback Control 3–DISC VCD CHANGER STANDBY / ON STANDBY TIMER PROGRAM B.
Unpac king ● After unpacking, chec k that the f ollowing parts are contained. Desembalaje ● Desembale el aparato y verifique que los siguientes accesorios están en la caja.
Setting this system Instalación del sistema * English Set this system by allowing enough spaces around and behind the main unit to assure good ventilation. Be sure not to place another unit or any object on top of the main unit to prevent the ventilation holes from being obstructed.
Fr ont panel Fr ont panel Panel delantero DISC 3 OPEN / CLOSE DISC CHANGE DISC 2 DISC 1 DIGITAL VIDEO VIDEO CD Version 2.0 / Playback Control 3–DISC VCD CHANGER STANDBY / ON STANDBY TIMER PROGRAM B.
1 Display Visualizador 2 Remote control sensor Sensor del control remoto 3 TIMER 4 ST ANDBY [p. 13] 5 B. BOOST [p. 33] 6 PROGRAM [p. 36] 7 KARA OKE [p. 38] 8 PHONES [p. 34] Amplifier/tuner Amplificador/sintonizador 9 MIC (1, 2) [p. 38] 0 B ASS/TREBLE [p.
Remote control Contr ol remoto POWER 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 0 PRESET TUNER + I0 PRESET TIME A PROG B R.TIME C EDIT D DISC SKIP INTRO MODE RETURN SELECT E KARAOKE TIME INDEX DIGEST TIME INDE.
1 T ransmission window V entanilla de transmisión [p. 5] 2 Numeric buttons Botones numéricos [p. 24] 3 A, B, C, D , E [p. 24] 4 KARA OKE [p. 38] 5 TEST [p. 11] 6 CENTER/REAR/DELA Y [p. 37] KEY/ECHO [p. 39] F Numeric buttons Botones numéricos [p. 14] G TIME [p.
For basic source play, the following illustrations on top of the pages will help you look for the section you need. ...... CD/Video CD play ....... Tuning ...... Tape playback/recording Contents Precautions ....................................... 1 Features .
E -1 English ■ To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ■ Choose the installation location of this system carefully. Avoid placing it in direct sunlight or close to a source of heat.
E -2 As the laser beam used in this unit is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. This system is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior.
E -3 English Precautions: Read this before operating your system The CD/Video CD player in this system can play discs of the following types only. Never attempt to play a disc other than specified above with the CD/Video CD player because it may cause a damage to this system.
E -4 Featur es General • 5-Speaker Multi-Channel Audio System (Two Front, One Center and Two Paralleled Rear Speakers) • High Power Output Front L, R: 100W + 100W (6 Ω ) RMS, 10% THD, 1 kHz Cent.
E -5 English Pr eparations and connections 1 Turn the remote control over and remove the battery compartment cover by sliding it in the direction of the mark. 2 Insert the batteries (AA, R6, UM-3 type) according to the polarity markings on the inside of the battery compartment.
E -6 Preparations and connections ■ 4 channel 5 speaker configuration This system employs a 5 speaker configuration: 2 front speakers, 2 rear paralleled speakers and a center speaker.
E -7 English Preparations and connections ■ Mounting the rear speakers Mount the rear speakers on a shelf, rack or on the floor, or hang them on the wall. To mount the rear speakers by using commercially available speaker stands The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm).
E -8 MAINS TV MODE PAL AUTO NTSC SUBWOOFER OUT VIDEO SIGNAL OUT IN VCR VIDEO R L OUT IN AUX/MD SPEAKERS SEE OWNER'S MANUAL FOR CONNECTION. REAR CENTER REAR R L CENTER: 6 MIN.
E -9 English FREQUENCY STEP 50 K H Z 9 K H Z 100 K H Z 10 K H Z FM AM TV MODE PAL AUTO NTSC DIGITAL OUT OPTICAL SUBWOOFER OUT OUT IN VCR VIDEO R L OUT IN AUX/MD SEE FOR REAR R CENTE R REAR: R VIDEO SIGNAL MONITOR OUT ANTENNA FM GND AM 75 UNBAL. FREQUENCY STEP 50 K H Z 9 K H Z 100 K H Z 10 K H Z FM AM DIGITAL OUT OPTICAL ANTENNA FM GND AM 75 UNBAL.
E -10 Setting the clock 1 While the power is on, press DISPLAY to display time. 2 While holding down TIME ADJ , press HOUR and set the hour. * Press HOUR once to advance the time by 1 hour. Press and hold to advance continuously. 3 While holding down TIME ADJ , press MIN and set the minute.
E -11 English Preparations and connections Speaker balance adjustment You can adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. This is important for the best performance of the built-in Dolby Pro Logic surround decoder.
E -12 CD/V ideo CD player operation Display information Each indicator mentioned with a number on pages 13–20 corresponds to the indicator with the same number on this page. 1 TRA CK (track number) 2 Time display 3 Disc indicator The number on the top of this indicator shows the currently selected disc.
E -13 English CD/Video CD player operation Basic play 1 Turn on the power. * When you play a Video CD, you must also turn on the TV monitor connected to this system. 2 Press INPUT or (or INPUT on the remote control) until “VCD/CD” ( 2 ) appears on the display.
E -14 CD/Video CD player operation T o change the disc play mode If necessary, change the disc play mode by pressing MODE on the remote control. All disc play mode: All discs on the disc tray are played sequentially (originally set to this mode). Single disc play mode: Only the designated disc is played.
E -15 English T o play the desired track (Skip) To advance to the next track During play, press ( ). Pressing ( ) repeatedly advances to other tracks. To return to the beginning of current track During play, press ( ) once. To return to previous track During play, press ( ) twice in succession to return to the previous track.
E -16 CD/Video CD player operation Program play You can program up to 20 tracks in any desired order. 1 When the CD/Video CD player is being stopped, press PROG to prepare for programming. * “PROG” ( A ) and “P-01” ( 2 ) will light up on the display, and all track numbers on the selected disc ( 9 ) will begin blinking.
E -17 English CD/Video CD player operation Repeat play All discs, a disc, a single track or a programmed sequence can be repeated continuously. Press REPEAT once or more to select the desired repeat play mode so that the S REP or F REP indicator ( B ) is illuminated.
E -18 Random play Tracks on a selected disc or all discs on the disc tray can be played randomly. 1 If necessary, switch the disc play mode by pressing MODE . * If the single disc play mode is selected, select the desired disc by pressing DISC SKIP . 2 Press RANDOM to begin random play.
E -19 English CD/Video CD player operation T o find the desired scene quickly for Video CDs Press TIME INDEX or once or more to skip forward or backward by the displayed time. By pressing a button repeatedly, the time on the display and TV monitor changes.
E -20 CD/Video CD player operation Playback Control of V ideo CD (version 2.0) for Video CDs This function is available for Video CDs (version 2.0) only. “PBC” will light up on the display when a version 2.0 disc is used. The Playback Control differs from disc to disc.
E -21 English T uning operation Display information Each indicator mentioned with a number on pages 22–24 corresponds to the indicator with the same number on this page. 1 Preset station group and n umber indicator 2 Multi-information displa y 3 STEREO 4 AU TO 5 TUNED 6 MEMOR Y 7 TUNER (input source indicator) 100 350 1K 3.
E -22 Tuning operation Automatic tuning 1 Turn on the power. 2 Press INPUT or until “TUNER” ( 2 , 7 ) appears on the display, or simply press TUNER on the remote control. 3 Select the reception band (FM or AM) by pressing PRESET/ TUNING/BAND (or TUNER on the remote control), and confirm it on the display ( 2 ).
E -23 English Tuning operation Automatic preset tuning You can make use of an automatic preset tuning function. With this function, the built-in tuner performs automatic tuning. Up to 40 stations [8 stations x 5 groups (A, B, C, D and E)] are stored automatically.
E -24 Tuning operation Manual preset tuning The built-in tuner can store station frequencies selected by tuning operation. With this function, you can select any desired station only by calling the corresponding preset station number. Up to 40 stations (8 stations x 5 groups) can be stored.
E -25 English Playing back a tape Display information Each indicator mentioned with a number on pages 26–31 corresponds to the indicator with the same number on this page.
E -26 Playing back a tape Basic operation 1 Turn on the power. 2 Press INPUT or until “TAPE” ( 1 , 5 ) appears on the display. 3 Open the tray by pressing OPEN/CLOSE . 4 Load the tape on the tray with side A facing upward, and close the tray by pressing OPEN/CLOSE or pushing the front edge of the tray gently.
E -27 English Winding the tape 1 Press or to wind the tape. 2 Press to stop. Note When the tape is wound to the end, the tape deck will then function as described below. : The tape stops at the end. : If the winding direction is , playback automatically starts from the reverse side when the tape reaches the end.
E -28 Recor ding Notes • Adjusting the VOLUME , BASS and TREBLE controls, and the use of B. BOOST , MUSIC and YMERSION have no effect on the recorded sound. The recording level is automatically adjusted. • A sound field program except for YMERSION may have effect on the recorded sound.
E -29 English Recording To stop recording temporarily Press REC/PAUSE . * Press on the tape deck to resume recording. To stop recording Press on the tape deck. To change the disc and track when recording from a CD or Video CD 1 Press on the CD/Video CD player.
E -30 Recording Recording fr om CDs utilizing the EDIT function The EDIT function performs recording on both sides of the tape. For Video CDs Video CDs cannot be recorded with the EDIT function. ■ EDIT recording 1 Press INPUT or repeatedly until “VCD/CD” ( 1 ) appears on the display, and load the disc to be recorded.
E -31 English Recording ■ Manual EDIT recording You can program tracks manually while watching the remaining time on both sides of the tape. 1 Press INPUT or repeatedly until “VCD/CD” ( 1 ) appears on the display, and load a disc (or discs) on the disc tray.
E -32 Operating an exter nal unit connected to this system Use an external unit connected to the VCR, VIDEO or AUX/ MD terminals on the rear of the main unit.
E -33 English V arious sound contr ol 1 Spectrum analyzer The spectrum of the input source which is divided into five bands will be indicated in real time.
E -34 Various sound control ■ Listening with headphones • Be sure that your headphones have a 3.5 mm (1/8”) diameter plug and between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms. • When you listen with headphones, connect the headphones to the PHONES jack.
E -35 English Various sound control Sound field pr ocessor The Sound Field Processor built into this system enables you to enjoy listening to a source with an ambience of actual concert hall or three-dimensional acoustics. This system provides preset sound field programs shown below.
E -36 Various sound control ■ Listening to the music with a sound field effect 1 Play a source. 2 Press PROGRAM repeatedly until the name of the desired program lights up on the sound field program indicator ( 5 ). * Whenever you press PROGRAM , the program changes and is displayed as follows.
E -37 English Various sound control If desired, you can adjust the sound output level of the center and/ or rear speakers even if the output level is already set in “Speaker balance adjustment” on page 11. CENTER LEVEL Control range : +10 to –21 1 Press CENTER/REAR/DELAY repeatedly until “CENTER” appears on the display.
E -38 Karaoke operation ■ Singing karaoke This system allows you to enjoy singing karaoke by using not only a source exclusively for karaoke use but also any normal audio source. 1 Connect one or two microphones to the MIC jack(s) on the front panel of the main unit.
E -39 English Karaoke operation ■ Adjusting the level of ECHO effect You can adjust the level of echo effect applied to the sound inputted from the microphone(s). This adjustment can be made only in the karaoke mode. Control range : Min, 1 to 6, Max 1 Press KEY/ECHO repeatedly until “ECHO” appears on the display.
E -40 Using the built-in timer Timer play By using the built-in timer, you can set the time when this system turns on and a source play begins, and the time when this system is set to the standby mode. 1 Press DISPLAY . Whenever DISPLAY is pressed, the display mode changes as follows.
E -41 English Timer r ecording 1 Follow steps 2–3 of “Basic recording” on page 28. 2 Tune in to the station you want to record. 3 Follow step 1 of “Timer play” on page 40. * In step 2 , select “TUNER”, and then press REC/PAUSE . (“REC >TAPE” and the frequency will flash alternately on the display.
E -42 Appendix T r oubleshooting Refer to the chart below when this system does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, disconnect the supply lead and contact your authorized YAMAHA dealer or service center.
E -43 English CD/Video CD player Problem A disc cannot be played normally, or there is a noise during play. Play will not begin even if disc is loaded. No sound or no picture. Sound stops suddenly (always at the same spot). A picture is disturbed or unstable.
E -44 Specifications Appendix ■ Amplifier section Minimum RMS Output Power per Channel FRONT 6 ohm, 1 kHz, 0.9% THD ........................... 80W+80W 6 ohm, 1 kHz, 10% THD ........................ 100W+100W CENTER 6 ohm, 1 kHz, 0.9% THD ..........
V558860 Y AMAHA ELECT R ONICS CORPOR A TION , USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALI F . 90620, U . S .A. Y AMAHA CANA D A MUSIC L T D . 135 MILNER A VE., SCARBO R OUGH, ON T ARIO M1S 3R1, CANA D A Y AMAHA ELECT R ONIK EU R O P A G.m.b.H. SIEMENSSTR .
Een belangrijk punt na aankoop van elk apparaat Yamaha GX707VCD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha GX707VCD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha GX707VCD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha GX707VCD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha GX707VCD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha GX707VCD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha GX707VCD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha GX707VCD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
