Gebruiksaanwijzing /service van het product RX-V1700 van de fabrikant Yamaha
Ga naar pagina of 140
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBO ROUGH, ONTARIO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , GERMANY YAMAHA ELECTRONIQUE FRANCE S.
CAUTION: READ THIS BEFO RE OPERATING YOUR UNIT. 1 T o assure th e finest performan ce, please read this manual carefully . Keep it in a safe place for future refer ence. 2 Install this sound system in a well ventilated, cool, dry , clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
1 En PREP ARA TION INTRODUCTION BAS I C OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION English FEATU RES ........ ............ .......... ............ .......... ......... 2 GETTING STARTED ... .......... ............ ............ ....... 3 Supplied accessories .
FEATURES 2 En Built-in 7- channel power ampli fier ◆ Minimum RMS output po wer (20 Hz to 20 kHz, 0.04% THD, 8 Ω ) Front: 130 W + 130 W Center: 130 W Surround: 130 W + 130 W Surround back: 130 W + .
GETTING STARTED 3 En INTRODUCTION English Check that you recei ved all of the follo wing parts. GETTING ST AR TED Supplied accessories About this manual • y indicates a tip for your oper ation. • Some operations can be performed by using either the b uttons on the front panel or the ones on the remote control.
CONTROLS AND FUNCTIONS 4 En This section describes only the amplif ier controls and functions of this unit. Se e the follo wing pages for details about other control and functions. • AM/FM tuning ............ ........... .... see page 54 1 MASTER ON/OFF T urns this unit on or of f (see page 31).
CONTROLS AND FUNCTIONS 5 En INTRODUCTION English 7 MUL TI ZONE buttons ZONE 2 ON/OFF T urns on Zone 2 only or sets it to the standby mode. See page 107 for details. ZONE 3 ON/OFF T urns on Zone 3 only or sets it to the standby mode. See page 107 for details.
CONTROLS AND FUNCTIONS 6 En ■ Remote contr ol contr ols and func tions This section describes only the amplif ier controls and functions of this unit. Se e the follo wing pages for details about other control and functions. • AM/FM tuning ........
CONTROLS AND FUNCTIONS 7 En INTRODUCTION English 0 MA CR O ON/OFF T urns on or off the macro function (see page 100). A MA CR O Programs a series of operations to be controlled with a single button (see page 100). B ST ANDBY Sets the main zone to the standby mode (see page 31).
CONTROLS AND FUNCTIONS 8 En This section describes the func tion of each control o n the Zone 2/Zone 3 remote control used to control the amplif ier functions of Zone 2 or Zone 3. See the following pages for de tails about other controls and functions.
CONTROLS AND FUNCTIONS 9 En INTRODUCTION English ■ Installing batteries in the remote contr ol 1 Press the part and slide the battery compartment cover off. 2 Insert the four supplied batteries (AAA, R03, UM-4) accord ing to the polarity markings (+ and –) on the inside of the battery compartment.
CONTROLS AND FUNCTIONS 10 En 1 HDMI indicator Lights up when the signal of the selected input source is input at HDMI IN 1 or HDMI IN 2 jacks (see page 19). 2 DOCK indicator Lights up when you station your iPod in a Y AMAHA iPod univ ersal dock (such as th e YDS-10, sold separately) connected to the DOCK te rminal of this unit (see page 27).
CONTROLS AND FUNCTIONS 11 En INTRODUCTION English 0 DSP indicators The respectiv e indicator lights up when any of the DSP sound field programs are selected. CINEMA DSP indicator Lights up when you select a CINEMA DSP sound field program (see page 45).
CONTROLS AND FUNCTIONS 12 En 1 REMO TE jacks See page 106 for details. 2 COMPONENT VIDEO jacks See pages 21 and 22 for connection information. 3 A udio compon ent jac ks See page 24 for connection information. 4 Video component ja cks See pages 21 and 22 for connection information.
CONNECTIONS 13 En PREP ARA TION English The speaker layout belo w sho ws the speaker setting we recommend. Y ou can use it to enjo y CINEMA DSP and multi-channel audio sources. Front left and right speakers (FL and FR) The front speakers are used for the main source sound plus effect sounds.
14 En CONNECTIONS Be sure to connect the left ch annel (L), right channel (R), “+” (red) and “–” (black) prope rly . If the connections are faulty , no sound will be heard from the spea kers, and if the polarity of the speaker co nnections is incorrec t, the sound will be unnatural and lack bass.
15 En CONNECTIONS PREP ARA TION English FRONT termin als Connect front left and right spe akers to these te rminals. CENTER terminals Connect a center speak er to these terminals. SURROUND terminals Connect surround left and right speakers to these terminals.
16 En CONNECTIONS 5 Hook the speaker terminal wrench onto the WRENCH HOLDER on the rear panel of this unit when not in use . ■ Connecting to the SP2 speaker terminals Connect Zone 2 or Zone 3 spea kers to these terminals (see page 106). 1 Open the ta b.
17 En CONNECTIONS PREP ARA TION English Some of the speakers ha v e sp eaker wire connections that allow bi-amplif ication to enha nce the performance of the speaker system. This unit allo ws you to make bi- amplification co nnection to one speak er system.
18 En CONNECTIONS ■ Aud i o j a cks This unit has three types of audio jacks. Connection depends on the a vailability of audio jacks on your other components. A UDIO jacks For con ventional analog audio si gnals transmitted via left and right analog audio cables .
19 En CONNECTIONS PREP ARA TION English This unit has the HDMI IN 1, HDMI IN 2 and HDMI OUT jacks for digital audio and video signal i nput/output. Connect the HDMI IN 1 or HDMI IN 2 jack of this unit to the HDMI output jack of other HDM I components (such as a D VD player).
20 En CONNECTIONS ■ Audio signal flow • 2 -channel as well as multi-channel PCM, D olby Digital and DTS signals input at the HDMI IN 1 or HDMI IN 2 jack can be output at the HDMI OUT jack only when “SUPPOR T A UDIO” is set to “OTHER” (see page 86).
21 En CONNECTIONS PREP ARA TION English Connect your TV (or projector) to the HDMI OUT ja ck, the COMPONENT VIDEO MONIT OR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDE O MONITOR OUT jack of this unit. Do not connect this u nit or other components to the A C power suppl y until al l connections between componen ts are com plete.
22 En CONNECTIONS Do not connect this unit or othe r components to the A C power supply until all connections between components are complete . • When “V CONV .” is set to “OFF” (see page 90), be sure to make th e same type of video connections as those made for yo ur TV (see page 21).
23 En CONNECTIONS PREP ARA TION English ■ Connecting a D VD recorder , PVR or VCR *1 When you connect another VCR to this un it, connect it to the VCR 1 terminals (S VIDEO IN, VID EO IN, A UDIO IN, S VIDEO OUT, VIDEO OUT and A UDIO OUT jacks) same as DVR/V CR 2 terminals except the DIGIT AL INPUT (COAXIAL) jack.
24 En CONNECTIONS ■ Connecting audio component s • T o make a digital connection to a component other than the defau lt component assigned to either the DI GIT AL INPUT jack or the DIGIT AL OUTPUT jack, selec t the corresp onding setting for “O PTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT” (see page 87).
25 En CONNECTIONS PREP ARA TION English ■ Connecting an externa l amplifier This unit has more than e nough power for an y home use. Howe ver , if you want to add more po wer to the speaker output or if you want to use another amplifier , connect an externa l amplifi er to the PRE OUT jacks.
26 En CONNECTIONS This unit is equipped with 6 additio nal input jacks (left and right FR ONT , CENTER, left and right SURROUND and SUBWOOFER) for discrete mu lti-channel input from a multi -format player , e xternal de coder , sound processor or pre-amplifier .
27 En CONNECTIONS PREP ARA TION English This unit is equipped with the DOCK te rminal on the rear panel that allows y ou to connect a Y AMAHA iPod uni versal dock (such as the YDS-10, sold separately) where you can station your iPod and control playback of your iPod using the supplied remote control.
28 En CONNECTIONS Both FM and AM indoor ante nnas are supplied with this unit. Connect each antenna correctly to the designated terminals. In general, these antennas should provide suff icient signal strength.
29 En CONNECTIONS PREP ARA TION English ■ Connecting the A C power cable Use the supplied AC cable. Do not use other AC po wer cables as doing so may result in fire or electrical shock. Plug the supplied A C po wer cable into the A C inlet after a ll other connections are complete, then plug the AC po wer cable into an A C wall outlet.
30 En CONNECTIONS If you are to use 6 ohm speaker s, set “SPEAKER IMP .” to “6 Ω MIN” as follo ws BEFORE using this unit. 4 ohm speakers can be also used as the front speakers. 1 Make sure this unit is turned off . See page 31 for details about turning on or of f this unit.
31 En CONNECTIONS PREP ARA TION English When all connec tions are complete, turn on th is unit. ■ T urning on th is unit Press MASTER ON/OFF on the fr ont panel inward to the ON position to turn on this unit. When you turns on this unit by pressing MASTER ON/ OFF, the main zone is turned on.
AUTO SETUP 32 En This unit employs the YP A O (Y AMAHA Parametric Room Acoustic Optimize r) technology which lets you a v oid troublesome listening- based speak er setup and achie ves h ighly accurate sound adjust ments automatically .
33 En AUTO SETUP PREP ARA TION English 3 Make sure of the follo wing chec k points before starting the A UTO SETUP operations. • Speakers are connected appropriately . • Supplied optimizer microphone is connected to this unit and placed appropriately .
34 En AUTO SETUP V olume level LEV EL Checks and adjusts the vo lume le ve l of each sp eaker . Choices: CHECK , SKIP • Select “CHECK” t o automatica lly check and adju st this item. • Select “SKIP” to skip this item and perform no adjustments.
35 En AUTO SETUP PREP ARA TION English 9 Press ENTER to disp la y the setup result s in detail. 10 Press l / h repeatedly to toggle between the setup result disp lays. y If you are not satisfied with th e results or want to manually adjust each parameter, run “MANUAL SETUP” (see page 77).
36 En AUTO SETUP 11 Press ENTER to return to the top “RESUL T:EXIT” displa y . 12 Make sure the pointer is poin ting at “SET” and “CANCEL” and then press l / h to select “SET” or “CANCEL”. Choices: SET , CANCEL • Select “SE T” to confirm the “A UTO SETUP” results.
37 En AUTO SETUP PREP ARA TION English ■ If “W ARN ING” appears When this unit detects pot ential problems during the “A UTO SETUP” procedure, “W ARNING” appears in the “RESUL T:EXIT” display . Chec k the warning messages to correct your speaker settings.
PLAYBACK 38 En Extreme caution should be exer cised when y ou play bac k CDs encoded in DTS. If y ou pla y bac k a CD encoded in DTS on a DTS-in compatible CD player , you will onl y hear some unwanted noise that ma y damage your speakers. Check whether your CD pla y er supports CDs encoded in DTS.
39 En PLAYBACK BAS I C OPERA TION English 3 Star t playback on the selected source component or select a broadcast station. • Refer to the operating inst ructions for the source component.
40 En PLAYBACK This unit comes with a v ariety of input jack s. Use this feature (Audio input jack select) to switch the input jac k assigned to an input source when more than o ne jacks are assigned to an input source. y • W e recommend setting Audio input jack select to “AUT O” in most cases.
41 En PLAYBACK BAS I C OPERA TION English Use this feature to select th e component connected to the MUL TI CH INPUT jacks (see page 26) as the input source. Rotate the input selector on the front panel to select MUL T I CH INPUT (or MUL TI CH IN on the remote control).
42 En PLAYBACK Y ou can display the format, samp ling frequenc y , channel, bit rate and flag data of the current input signal. 1 Set the operation mode selector to AMP and then press SET MENU on the remote contr ol. The top “SET MENU” displa y appears in t he OSD.
43 En PLAYBACK BAS I C OPERA TION English Y ou can combine a video image from a video source with sound from an audio source. For example, you can enjo y listening to classical music whi le vie wing beautiful scenery from the video s ource on the video monitor .
SOUND FIELD PROGRAMS 44 En This unit is equipped with a variety of precise d igital de coders that allow you to enjo y multi-channel playback from almost any stereo or multi-ch annel sound source.
45 En SOUND FIELD PROGRAMS BAS I C OPERA TION English y Select a sound field progr am based on your listening pref erence, not merely on the name of the program, etc.
46 En SOUND FIELD PROGRAMS ■ For various source s The av ailable sound field paramete rs and the created sound f ields dif fer depending on the input sour ces and the settings of thi s unit. CLASSICAL Chamber This progra m creates a relatively wide space wi th a high cei ling like an au dience ha ll in a palac e.
47 En SOUND FIELD PROGRAMS BAS I C OPERA TION English ■ For visual sour ces of m usic The av ailable sound field parameters and the created sound fields dif fer depending on the input sources and the settings of thi s unit.
48 En SOUND FIELD PROGRAMS ■ Stereo pla ybac k MOVIE Spectacle This progra m creates the extremely wide s ound field of a 70- mm movie theater. It precisely repr oduces the source soun d in detai l, making both the vide o and the sound field incred ibly real.
49 En SOUND FIELD PROGRAMS BAS I C OPERA TION English ■ Using sound field pr ograms without surr ound speaker s (Virtual CINEMA DSP) V irtual CINEMA DSP allo ws you to e njoy the CINEMA DSP programs without surr ound speakers. It creates virtual speakers to repr oduce the natural sound f ield.
USING AUDIO FEATURES 50 En Use the Pure Direct mode to enjo y the pure f idelity sound of the selected source. When the Pure Direct mode i s acti vated, this unit play s back the selected s ource with t he least circuitry . Press PURE DIRECT on th e front panel (or on the remote control) to turn on or off the Pure Direct mode.
51 En USING AUDIO FEATURES BAS I C OPERA TION English Y ou can adjust the output lev el of each speaker while listening to a music source. This is also possible when playing sources input at the MUL TI CH INPUT jacks. This operation will override the level adjustments made in “A UT O SETUP” (see page 32) and “SP LEVEL” (see page 83).
52 En USING AUDIO FEATURES Compression artif acts (such as the MP3 format) are created by a lossy compressi on scheme where the audio is resampled to lower the bit rate and to remov e sounds that are indistinguishable to t ypical human hearing.
53 En USING AUDIO FEATURES BAS I C OPERA TION English The night listening modes are designed to improv e listenability at lo wer volumes or at night. Choose either “NIGHT :CINEMA” or “NIGHT:MUSIC” dep ending on the type of material you are playing.
FM/AM TUNING 54 En There are 2 tuning methods: automatic a nd manual. Automatic tuning is ef fecti ve when st ation signals are strong and there is no interference.
55 En FM/AM TUNING BAS I C OPERA TION English ■ Remote contr ol functions Zone 2/Zone 3 remote con trol is supp lied with U .S.A., Canada, Australia, U.K ., China, Asia and General models only . 1 TUNER Selects “TUNER” as the input source . This unit is turned into the last select ed station.
56 En FM/AM TUNING Automatic tuning is ef fectiv e when station signals are strong and there is no interference. 1 Rotate the INPUT selector to select “TUNER” as the input source. 2 Press FM/AM to select the reception band. “FM” or “AM” appears in the front panel display .
57 En FM/AM TUNING BAS I C OPERA TION English If the signal recei ved from the station you w ant to select is weak, tune into it manually . Manually tuning into an FM st ation automa tically switches the tuner to monaural reception to increase the signal quality .
58 En FM/AM TUNING Y ou can use the automa tic preset tuning feature to store up to 40 FM stations with strong signals (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) in order . Y ou can then recall an y preset station easily by selecting the preset station numbe r .
59 En FM/AM TUNING BAS I C OPERA TION English Y ou can also store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) manually . 1 T une into a station auto ma tically or manually . See pages 56 and 57 for tuning instructions.
60 En FM/AM TUNING Y ou can tune into an y desired station simply by selecting the preset station group and number under which it was stored. y When performing this oper ation w ith the remote control, set the operation mode selector to S OURCE and then press TUNER to select “TUNER” as the input source.
61 En FM/AM TUNING BAS I C OPERA TION English Y ou can e xchange the assignmen ts of two preset stations with each other . The exam ple below describes the procedure to exchange preset station “E1” with “A5”. 1 Select pres et station “E1 ” using A/B/ C/D/E and PRESET/TUNING l / h .
RADIO DATA SYSTEM TUNING (U.K. AND EUROPE MODELS ONLY) 62 En Radio Data System is a data transmissi on system used b y FM stat ions in man y countries.
63 En RADIO DATA SYSTEM TUNING (U.K. AND EUROPE MODELS ONLY) BAS I C OPERA TION English Use this feature to sele ct the desired radio program by program type from the all pr eset Radio Data S ystem broadcasting stations. y Use the automatic preset tuning feature to preset Radio D ata System broadcasting stations (see page 58).
64 En RADIO DATA SYSTEM TUNING (U.K. AND EUROPE MODELS ONLY) 5 Press PTY SEEK ST ART on the remote control to start searching f or all the av ailable Radio Data System pr eset stations. The name of th e selecte d program type flashes and the PTY HOLD indicator lights up in the front panel display while this unit is searching for stations.
65 En RADIO DATA SYSTEM TUNING (U.K. AND EUROPE MODELS ONLY) BAS I C OPERA TION English 3 Press EON on the remote control repeatedly to select one of the 4 Radio Data System prog ram types (NEWS, AFF AIRS, INFO or SPORT). The name of the selected program type appears in the front panel display .
USING IPOD 66 En Once you hav e stationed your iPod in a Y AMAHA iPod uni versal dock (such as the YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 27), you can enj oy playback of your iPod using the supplied remote control.
67 En USING iPod BAS I C OPERA TION English 1 Set the operation mode selector to SOURCE and then press DISPLA Y on the remote contro l. The follo wing display appea rs in the OSD. 2 Press k / n / l / h on the remote contr ol to navigate the iP od menu and then press ENTER to begin pla ybac k of the selected song.
RECORDING 68 En Recording adjustments and ot her operations are performed from the reco rding components. Re fer to the operating instructions for those components. The DTS signal is a digital bitstream. Attemptin g to digitall y recor d the DTS bitstream will result in noise being recorded.
ADVANCED SOUND CONFIGURATIONS 69 En AD V ANCED OPERA TION English Y ou can enjo y good quality sound with the initial factory settings. Although you do not hav e to change the initial factory settings, you can change some of the parameters to better suit the input source or your listening room.
70 En ADVANCED SOUND CONFIGURATIONS ■ Sound field parame ter descriptions Y ou can adjust the v alues of certain digi tal soun d field parameters so that the so und fields are recreated accurately in your listening room. Not all of the follo wing parameters are found in e v ery program.
71 En ADVANCED SOUND CONFIGURATIONS AD V ANCED OPERA TION English ROOM SIZE P.ROOM SIZE S.ROOM SIZE SB ROOM SIZE Room size. Presence, su rround, and su rround back room size. Adjusts the appar ent size of the surround sound f ield. The lar ger the v alue, the larger the su rround sound f ield becomes.
72 En ADVANCED SOUND CONFIGURATIONS REV.TIME Re verberation time. Adjusts the amount of time taken for the dense, subsequent re verberation sound to decay by 60 dB at 1 kHz. This chan ges the apparent size of the acoustic environment over an e xtremely wide range.
73 En ADVANCED SOUND CONFIGURATIONS AD V ANCED OPERA TION English ■ Selecting decoder s f or 2-c hannel sourc es (surr ound decode mode) Use this feature to play back sources with selected decoders. Y ou can play back 2-channel sources on multi- channels.
74 En ADVANCED SOUND CONFIGURATIONS ■ Decoder descriptio ns y When you select the surround decode mo de for Dolby Digital, DT S or DTS 96/24 sources, this unit automatically selects “SURROUND DECODE Dolby Digital”, “SURROUND DECODE DTS” or “SURR OUND DECODE DTS 96/24” program.
75 En ADVANCED SOUND CONFIGURATIONS AD V ANCED OPERA TION English Decoder parameter des criptions ■ Selecting decoder s used wit h sound field progra ms Use this feature to sele ct the desired decoder used with MO VIE sound f ield prog rams (except “Mono Movie”).
76 En ADVANCED SOUND CONFIGURATIONS ■ Selecting decoder s f or m ult i-channel sour ces If you connected surround back speakers, use this feature to enjoy 6.1/7.1-channel pl ayback for multi-ch annel sources using the Dolby Pro Logic IIx, Dolb y Digital EX or DTS-ES decoders.
CUSTOMIZING THIS UNIT (MANUAL SETUP) 77 En AD V ANCED OPERA TION English Y ou can use the follo wing parameters in “SET MENU” to adjust a v ariety of system settings and customiz e the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listenin g en vironment.
78 En CUSTOMIZING THIS UNIT (MANUAL SETUP) Input menu 3 INPUT MENU Use this menu to manually re assign the input/output jacks, select the input mode or rename the input source. Option menu 4 OPTION MENU Use this menu to manually adjus t the optional system parameters.
79 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English Use the remote control to acce ss and adjust each parameter . y • Y ou can cha nge the “SET MENU” pa rameters while this unit is reproducing sound. • If you press P ARAMETER during the “SET MENU” operation, the “SET MENU” opera tion is canceled.
80 En CUSTOMIZING THIS UNIT (MANUAL SETUP) 5 Press k / n repeatedly and then press ENTER to select and enter the desired submenu. The following display is an example wher e “LFE LEVEL” is selected. 6 Press k / n to select the desired parameter and then l / h to change the pa rameter settings.
81 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English Front speakers FRONT SP Choices: SMALL, LARGE • Select “SMALL” (small) if you have small front speakers that do not re produce lo w-frequency signals effecti vely .
82 En CUSTOMIZING THIS UNIT (MANUAL SETUP) Surround bac k speakers SB L/R SP Choices: NONE, SMLx1, SMLx2 , LRGx1, LRGx2 • Select “NONE” (none) if you did not connect surround back speakers. The surround back channel signals are directed to the surround left and right speakers.
83 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English ■ Speaker le vel B)SP LEVEL Use this feature to manually bal ance the speaker le v els between the front left o r surr ound left speakers and each speaker selected in “S PE AKER SET” (see page 80).
84 En CUSTOMIZING THIS UNIT (MANUAL SETUP) • “ CENTER”, “SUR. L”, “SUR. R”, “SB L”, “S B R”, “SWFR”, “PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP” (see page 81), “SUR.
85 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English Graphic eq ualizer GEQ Use to match the tonal quality of the center, surround L/R and surround back L/R, surround back , presence L/R speakers and the subw oofer with that of the front L/R speakers.
86 En CUSTOMIZING THIS UNIT (MANUAL SETUP) ■ A udio settings D)AUDIO SE T Use this feat ure to adjust the overall audio settings of this unit. Muting type MUTING TYPE Use this feature to adjust ho w much the mute func tion reduces the output v olume (see page 41).
87 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English Use this menu to reassign the i nput/output jacks, select the input mode or rename the input source.
88 En CUSTOMIZING THIS UNIT (MANUAL SETUP) For OPTICAL OUTPUT jacks 8 and 9 OPTICAL OUT Choices: (8) MD/T APE , CD-R, CD, PHONO, D VD, DTV, CBL/SA T, VCR 1, D VR/VCR 2, V- A U X (9) MD/T APE, CD-R , CD, PHONO, D VD, DTV, CBL/SA T, VCR 1, D VR/VCR 2, V- A U X • Y ou cannot select a specific ite m more than on ce for the same type of jack.
89 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English ■ V olume T rim C)VOLUME TRIM Use this feature to adjust the le vel of the signal input at each jack. This is useful if you want to balance the le vel of each input source to av oi d sudden changes in v olume when switching between input sources.
90 En CUSTOMIZING THIS UNIT (MANUAL SETUP) Use this menu t o adjust t he optional system parameters. ■ Displa y setti ngs A)DISPLAY SET Use “V -RESE T” in “ADV ANCED SETUP” to set the parameters in “DISPLA Y SET” (except “DIMM ER”, “SHOR T M ESSA GE”, “ON SCREEN” and “FL SCROLL”) to the factory presets (see page 112).
91 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English Component interlace/progressive up-con version CMPNT I/P Use this feature to acti vate or deacti v ate the analog interlace/pro.
92 En CUSTOMIZING THIS UNIT (MANUAL SETUP) ■ Memory guard B)MEMORY GUARD Use this feature to prev ent accidental changes to DSP program parameter v alues a nd other system settings. Choices: OFF , ON • Select “OFF” to turn of f the “ME MOR Y GU ARD” feature.
93 En CUSTOMIZING THIS UNIT (MANUAL SETUP) AD V ANCED OPERA TION English ■ Zone set F)ZONE SET Zone 2 volume ZONE2 VOL Zone 3 volume ZONE3 VOL Use to select ho w the vol ume control will operat e with regard to the ZONE 2 OUTPUT or ZONE 3 OUTPUT jacks.
REMOTE CONTROL FEATURES 94 En In addition to controlling this unit, the remote control can also operate other audiovisual component s made by Y AMAHA and other manufacture rs. T o control your TV or other components, you mu st set up the appropriate remote co ntrol code for each input source (see page 96).
95 En REMOTE CONTROL FEATURES AD V ANCED OPERA TION English ■ Controlling other compone nts Set the operation mode select or to SOURCE to cont rol other components sele cted with the input selector buttons, or . Y ou must set the a ppropriate remote control code for each input source in advance (see page 96).
96 En REMOTE CONTROL FEATURES ■ Selecting a compo nent to be contr olled Y ou can sele ct a component to be controlle d independently of the input source selected with the input selector buttons. Press SELECT k / n repeatedly to select the desired component.
97 En REMOTE CONTROL FEATURES AD V ANCED OPERA TION English 2 Press and hold LEARN for about 3 seconds using a ballpo int pen or similar object. The library name (ex. L;D VD) and the name of the selected input area (ex. DVD) appear alternately in the display window on the remote control.
98 En REMOTE CONTROL FEATURES Y ou can program remote cont rol codes from other remote controls. Use the l earn featur e if you want to program functions not included in th e basic operations cov ered by the remote control codes, or an appropriate remote control code is not av ailable.
99 En REMOTE CONTROL FEATURES AD V ANCED OPERA TION English 5 Press and hold the button you want to program on the other remote control until “OK” appear s in the disp la y window on the remote control. “NG” appears in the display windo w on the remote control if learning was unsucces sful.
100 En REMOTE CONTROL FEATURES 3 Press k / n to select and enter a character . Pressing n changes the charact er as follows: A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon), / (slash), and space. Pressing k changes the charac ters in reverse order .
101 En REMOTE CONTROL FEATURES AD V ANCED OPERA TION English ■ Default macr o functions *1 Y ou can turn on some compone nts (inclu ding Y AMAHA components) conne cted to th is unit by connectin g them to the AC OUTLETS on the rear panel of this unit.
102 En REMOTE CONTROL FEATURES ■ Pr ogramming macr o operations Y ou can program your own macro and use the macro programming feature to tra nsmit sev eral remote control commands in sequence at the pr ess of a button. Be sure to set up remote control codes or perform learning operations before programming the macro.
103 En REMOTE CONTROL FEATURES AD V ANCED OPERA TION English Y ou can clear all changes made in each function set, such as learned functions, macros , renamed input area names and setup remote control ID. ■ Clearing function sets 1 Set the operation mode selector to AMP or SOURCE and then press CLEAR by using a ballpoint pen or similar object.
104 En REMOTE CONTROL FEATURES ■ Clearing a learned functi on Y ou can cl ear the function lear ned for a certain b utton in each control area. 1 Set the operation mode selector to AMP or SOURCE and then press an input selector button, or to select the input area containing the function y ou want to c lear .
105 En REMOTE CONTROL FEATURES AD V ANCED OPERA TION English ■ Clearing a macr o function Y ou can clear the function programmed for a certain macro button. 1 Set the operation mode selector to AMP or SOURCE and then press MA CR O using a ballpoint pen or similar object.
USING MULTI-ZONE CONFIGURATION 106 En This unit allows you to configu re a multi -room audio system. The mult i-zone conf iguration featur e enables you to set this unit to reproduce separate input sources in the main room , second room (Zone 2) and th ird room (Zone 3).
107 En USING MULTI-ZONE CONFIGURATION AD V ANCED OPERA TION English ■ Using the internal amplifier s of this unit If you want to use one internal amplifie r (SP1 or SP2) of this unit Connect the Zon.
108 En USING MULTI-ZONE CONFIGURATION y • Y ou must complete this step within 5 seconds while the selected zone flashes in the fr ont panel display . Otherwise, the currently selected zone mode is automatically canceled. In this case, pr ess ZONE CONTROLS again.
109 En USING MULTI-ZONE CONFIGURATION AD V ANCED OPERA TION English Select TUNER as the input source to use the TUNER features in the selected zone . For d etails about the TUNER operations, see “FM/AM TUNING” on page 54. The selected input source is shared across all zones.
ADVANCED SETUP 110 En This unit has additional menus th at are displayed in the front panel disp lay . The adv anced setup menu of fers additional operations to adjust and cust omize the way this unit operate s. Change the init ial settings (indicate d in bold under each parameter) to reflect the need s of your listening en vironment.
111 En ADVANCED SETUP AD V ANCED OPERA TION English ■ Speaker impedance SPEAKER IMP. Use this feature to set the speak er impedance of this unit so that it matches that of your speakers. Choices: 8 Ω MIN , 6 Ω MIN •S e l e c t “ 8Ω MIN” to set the speaker impedance to 8 Ω .
112 En ADVANCED SETUP ■ Bi-AMP BI-AMP Use to activ a te or deactiv a te the bi-AMP function. Choices: ON, OFF • Select “ON” if you want to activate the bi-AMP function.
113 En ADVANCED SETUP AD V ANCED OPERA TION English 4 Press the numeric bu ttons to enter the four -digit remo te contr ol code fo r the input area y ou want to use. Remote control AMP codes Select one of the following c odes to set the remote control AMP code for the input area you want to use.
114 En ADVANCED SETUP 4 Press the numeric buttons to enter the four -digit remote control code f or the input area yo u want to use. Remote control tuner codes Select one of the follo wing codes to set the remot e control tuner code for the inpu t area you want to use.
TROUBLESHOOTING 115 En ADDITIONAL INFORMA TION English Refer to the table belo w when this unit does not function prope rly . If the problem you are experien cing is not listed belo w or if the instruction belo w does not help, turn of f this unit, disconnect the po wer cable, and contact the near est authorized Y AMAHA dealer or service center .
116 En TROUBLESHOOTING Problem Ca use Remedy See page No picture. The output and input for the p icture are connected t o different types of v ideo jacks. Set “V CONV .” to “ON” or connect your s ource component s in the same w ay as you c onnect your video monitor to this u nit.
117 En TROUBLESHOOTING ADDITIONAL INFORMA TION English Prob lem Cause Remed y See page No sound is heard from the subwoofer . “LFE/BASS OUT” in “SET MENU” is set to “FR ONT” when a Dolb y Digital or DTS signal i s being playe d. Set “LFE/BASS OUT” to “SWFR” or “BOTH”.
118 En TROUBLESHOOTING ■ T uner Problem Ca use Remedy See page This unit does no t operate properly . The internal microcomput er has been frozen by an externa l electri c shock (suc h as lightning or exces siv e static elec tricity) or by a power supply wit h low voltage.
119 En TROUBLESHOOTING ADDITIONAL INFORMA TION English ■ Remote contr ol ■ HDMI Prob lem Cause Remed y See page The remote con trol does not work or function properly . Wrong distan ce or angle. The remote con trol will func tion within a maximum range of 6 m and no more t han 30 degrees o ff-axis from the fron t panel.
120 En TROUBLESHOOTING ■ iP od In case of a transmission error w ithout a status message appearing in the f ront panel and in the OSD, check the connection to y our iPod (see page 27). ■ A UTO SETUP Before A UT O SETUP Note Status message Cause Remed y See page Loading.
121 En TROUBLESHOOTING ADDITIONAL INFORMA TION English During A UT O SETUP After A U T O SETUP • I f the “ERR OR” or “W ARNING” scre ens appears, check th e cause of the problem, then run “A UTO SETUP” again. • I f warning “W -1” appears, c orrections are made, but they may not be optimal.
RESETTING THE SYSTEM 122 En Use this feature to reset all the parame ters of this unit to the initial fa ctory settings. • T his procedure completely re sets all the pa rameters of this uni t including the “SET MENU” parameters. Howev er , the advanced se tup menu parameters will not be initialized.
GLOSSARY 123 En ADDITIONAL INFORMA TION English ■ Bi-amplification connect ion A bi-amplification co nnection uses two amplif iers for a speaker . One amplifier is conne cted to the woofer section of a loudspeaker while th e other is connected to the combined mid and tweeter section .
124 En GLOSSARY ■ Dolb y Surr ound Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dyn amic sound ef fects: 2 front left and right channe ls (stere o), a center channel for dialog (monaural), and a surround channel for special sound effects (monau ral).
125 En GLOSSARY ADDITIONAL INFORMA TION English ■ Sampling frequency an d number of quantized bits When digitizing an analog a udio sig nal, the number of times the si gnal is sample d per second i .
SOUND FIELD PROGRAM INFORMATION 126 En ■ Elements of a sound field What really crea tes the rich, full tones of a li ve instru ment are the multi ple reflections from the walls of the room.
PARAMETRIC EQUALIZER INFORMATION 127 En ADDITIONAL INFORMA TION English This unit employs Y AMAHA Parametric Room Acoustic Optimizer (YP A O) technology , together with the Param etric EQ setting s (see page 84), t o optimize the frequency characteristics of its parametric equa lizer to match your listening en vironment.
SPECIFICATIONS 128 En A UDIO SECTION • Min imum RMS Output Power for Front, Cent er, Surround, Surround ba ck 20 Hz to 20 kHz, 0.04% THD, 8 Ω .. .................. ................ 130 W • Dyna mic Power (IHF) 8/6/4/2 Ω ............... .......
129 En SPECIFICATIONS ADDITIONAL INFORMA TION English GENERAL • Power Su pply [U.S.A. and Can ada models] ............................ . A C 120 V , 60 Hz [General and As ia model] ...................... ................. AC 110/120/220/230–240 V , 50/60 Hz [China model] .
APPENDIX-i SOUND OUTPUT IN EA CH SOUND FIELD PROGRAM *1 / / : OFF *2 / / : ON, PRIORITY : PRNS *3 / / : ON, PRIORITY : SB Front left speaker Surround left speaker Surround back right speaker Center sp.
APPENDIX-ii MO VIE ST ANDARD (PLII Movie) (PLIIx Mo vie) (Neo:6 C inema) PRIORITY : PRNS (Dolby Digital) / (DTS) (Dolby Digital) / (DTS) (Dolby Digital) / (DTS) PRIORITY : SB MO VIE Spectacle Sci-Fi A.
APPENDIX-iii SURR OUND D ECODE PRO LOGI C PR O LOGIC Dolby Digital / DTS Dolby Digital / DTS Dolby Digital / DTS Dolby Digital / DTS SURR OUND D ECODE PLII Movie PLII Music PLII Game Movie/Game Movie/.
APPENDIX-iv SURROUND DECODE Neo:6 Cinema Neo:6 Music Cinema Cinema/M usic Do lby Digital / DTS Dolby Digital / DTS Dolby Digital / DTS Music STRAIGHT Monaural pl ayback PURE DIRECT Monaural pl ayback Program Input so urce 2-channel audio (monaural) 2-channel audio (stereo) 5.
APPENDIX-v LIST OF REMO TE CONTROL CODES CABLE ABC 0030, 0035 AMERICAST 0926 BELL SOUTH 0926 BIRMINGHAM CABLE COMMUNICATIONS 0303 BRITISH T ELECOM 0030 CABLE & WIRELESS 1095 DAERYUNG 0035, 0504, 0.
APPENDIX-vi LD PLA YER CARVER 0091 DENON 0086 MARANTZ 0091 MITSUBISHI 0086 NAD 0086 NAGSMI 0086 OPTIMUS 0086 PHILIPS 0091 PIONEER 0086 SALORA 0091 SONY 0228 T ELEFUNKEN 0086 Y AMAHA 2200 MD RECORDER K.
APPENDIX-vii BRANDT 0136, 0362 BROKSONIC 0263, 0490 BUSH 0036, 0064, 0 398, 0401, 0695, 1064 CCE 0064 CGE 0274 CTC 0274 CXC 0207 CANDLE 0057 CARNIVALE 0057 CARVER 0081, 0197 CASCADE 0036 CATHAY 0064 C.
APPENDIX-viii SABA 0136, 0190, 03 14, 0362 SACCS 0265 SAGEM 0637 SAISHO 0036, 0291, 05 43 SALORA 0190, 038 0, 0388, 0575 SAMBERS 0543 SAMPO 0036, 0057, 01 19, 0120, 0181, 0198, 0205, 0677, 1782 SAMSUN.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBO ROUGH, ONTARIO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , GERMANY YAMAHA ELECTRONIQUE FRANCE S.
Een belangrijk punt na aankoop van elk apparaat Yamaha RX-V1700 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha RX-V1700 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha RX-V1700 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha RX-V1700 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha RX-V1700 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha RX-V1700 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha RX-V1700 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha RX-V1700 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
