Gebruiksaanwijzing /service van het product RX-V667 van de fabrikant Yamaha
Ga naar pagina of 144
Owner’ s Man ual A V Receiver English f or U .S.A..
En 2 CONTENTS INTRODUCTION Featur es and capabilities ................. ....................... ........... 4 Using the TV OSD to operate th e unit ............ ................. 5 V ie w or modify content fo r the current input source <Content windo w> .
En 3 SETUP Conf iguring input sources (Input menu) ..... .................. 72 Configuring input sources ................. ....................... ...... 72 Input menu ............. .................... ................... .................. 73 Editing the SCENE function (SCENE menu) .
En 4 INTRODUCTION ■ Built-in high-quality , high-p ower 7-channel amplifier ■ 6 HDMI input jacks ( 5 + 1 VIDEO A UX) supporting A udio Return Channel and 3D video signal ■ 1-button input/sound pr ogram switching (SCENE function) ................
INTRODUCTION En 5 This unit features a sophisticated on-scree n display (OSD) for the TV screen. The O SD is designed to enable visual g uidance tha t simplifies operations. The OSD mainly displays the ON SCREEN and OPTION menus, as well as the Content window that displays the content of current input so urces.
INTRODUCTION Using the TV OSD to operate the unit En 6 ■ HDMI settings – Assign the aud io input so urce for the T V <TV Audio Input> ..... ............ ............... ............ ............ ......... 91 – Listen to TV audio with HDMI cable connection <ARC (Audio Return Channel)> .
INTRODUCTION Using the TV OSD to operate the unit En 7 About this manual Supplied accessories Check that you receiv ed all of the follo wing parts. • Remote control • Batteries (AAA, R03, UM-4) x 2 • YP A O microphone • AM loop antenna • Indoor FM antenna • VIDEO A UX input cover • Some features are not av ailable in certain regions.
INTRODUCTION En 8 Front panel a MAIN ZONE A (MAIN ZONE Po wer) Switches this unit between on and standb y mode. b HDMI Through/iP od Charge indicator Lights up in any of the following cas es while the unit is in standby mode.
INTRODUCTION Part names and functions En 9 Rear panel a DOCK jack For conn ecting an optional Y amaha iPod univ ersal dock (such as YDS-12), iPod wireless receiver (YID-W10), or Blue tooth wireless audio receiver (YB A-10) ( ☞ p. 65 , p. 68 , p. 70 ).
INTRODUCTION Part names and functions En 10 Front panel display a HDMI indicator Lights up during normal HDMI communication when an y of the HDMI1-5 inputs are selected. b SIRIUS indicator Lights up when a SiriusCo nnect tune r is selected as an input source.
INTRODUCTION Part names and functions En 11 Remote control a Remote control signal transmitter T ransmits infrared signals. b MAIN/ZONE2 Switches the zone to be operated by the remote c ontrol between the Main zone an d Zone2 ( ☞ p. 106 ). c SOURCE A (SOURCE P ower) Switches an external component on and off.
INTRODUCTION Part names and functions En 12 On-screen display When a TV is connected to this unit, the supplied remo te control can be used to specify and v erify this unit’ s settings via menus and opti ons displayed on the TV screen. The following displays are a vai lable in the on-screen display .
En 13 CONNECTIONS This unit uses acoustic field effects and sound decoders to bri ng you the impact of a real movie theater or concert ha ll. These effects will be brought to you with ideal speak er positio ning and connections in your listening en vironment.
CONNECTIONS Connecting speakers En 14 Speaker layout ■ Enjoying the 7.1 channel audio sour ce ■ 7.1-channel speaker la yout (7 speakers + subw oofer) ■ Connections of speakers Connect the speakers to the following jacks according to the speaker layout.
CONNECTIONS Connecting speakers En 15 ■ Enjoying the 7.1 channel audio sour ce without surround bac k speakers ■ 5.1-channel speaker la yout (5 speakers + subw oofer) ■ Connections of speakers Connect the speakers to the following jacks according to the speaker layout.
CONNECTIONS Connecting speakers En 16 ■ Using speakers in tw o rooms (Zone2 function) ■ 7.1-channel speaker la yout + Zone 2 (7 speakers (in main zone) + subw oofer (in main zone) + front speaker s (in secondary zone)) Main zone Zone2 ■ Connections of speakers Connect the spea kers to the follo wing jacks acc ording to the speaker layout.
CONNECTIONS Connecting speakers En 17 Connecting speaker s and subwoofer Connect your speakers to their respective terminals on the rear panel. ■ Front/Center/Surr ound/Sur round bac k speaker and S.
CONNECTIONS Connecting speakers En 18 ■ Bi-amp connection This unit can be connected to speakers that support bi-amp connections. When conne cting speakers, connect the FR ONT jacks and the SURR OUND BA CK/BI-AMP jacks as in the diagram below . Configure the bi-amp sett ings to acti vate connections.
CONNECTIONS Connecting speakers En 19 3 Check that “SP IMP .” is displayed on the fr ont panel. 4 Press STRAIGHT repeatedly to select a “6 Ω MIN. ” 5 Switch this u nit to the standb y mode, and then switc h it on again. The power turns on, when the settin gs you made has been configured.
CONNECTIONS Connecting speakers En 20 ■ Connecting extra speaker s The EXTRA SP jacks can conne ct to the following speakers. 1 Press down the tab and insert the bare end of the speaker cable into the hole in the terminal. 2 Release the tab to secure the wire.
CONNECTIONS En 21 Cable plugs and jacks This unit is equipped with the following input/out put jacks. Use jacks and cables appropriate for components that you are going to connect. ■ A udio/Video jacks HDMI jac ks Digital video and digital sound ar e transmitted through a single jack.
CONNECTIONS Connecting external components En 22 Connecting a TV monitor This unit is equipped with the following three types of output jack for connection to a TV . HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper conn ection according to the input signal format supported b y your TV .
CONNECTIONS Connecting external components En 23 ■ Connecting an HDMI video monitor Connect the HDMI cable to the HDMI OUT jack. ■ Connecting a component video monitor Connect the component video cable to the COMPONENT VIDEO (MONIT OR OUT) jacks. ■ Connecting a video monitor Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
CONNECTIONS Connecting external components En 24 ■ Listening to TV audio T o transmit sound from the TV to this unit, c onnect as follo wings according to the TV : When using a TV that supports the A udio Return Channel fun ction and HDMI Contr ol function When your TV supports both HDMI Control (e.
CONNECTIONS Connecting external components En 25 Connecting BD/DVD play ers and other devices This unit has the follo wing input jacks. Conn ect them to the appropr iate output jacks o n the playback devices such as BD/D VD players.
CONNECTIONS Connecting external components En 26 ■ Connecting BD/D VD pla yers and ot her de vices with component video cables Connect the device with a co mponent vide o cable to one of the A V1-2 input jacks. Using optical digital audio output sources Select the A V1 input to which the playba ck de vice is connected for playback.
CONNECTIONS Connecting external components En 27 ■ Connecting BD/D VD pla yers and ot her de vices with video cables Connect the playback de vice with a video pin cable to one of the A V3-6 input jacks. Using optical digital audio output sources Select the A V4 input to which the playba ck de vice is connected for playback.
CONNECTIONS Connecting external components En 28 ■ Connecting CD play ers a nd other audio de vices Using analog stereo out put sources Select the audio input (A UDIO1-2) to which the playback de vice is connected for playback.
CONNECTIONS Connecting external components En 29 Connecting game consoles Use the VIDEO A UX jacks on the front panel to tempor arily connect devices such as a game console to the receiver .
CONNECTIONS Connecting external components En 30 Connecting an ex ternal amplifier The same channel signals are output from the ja cks of the PRE OUT terminals as from their corresponding SPEAKERS terminals.
CONNECTIONS Connecting external components En 31 Using the T rigger function to link external component power When this unit is connected to a Y amaha subwoof er that supports the system connection or the component with TRIGGER IN jack, you can turn on and off the component by using this unit.
CONNECTIONS En 32 An indoor FM antenna and an AM loop antenna are supplied with this receiv er . Connect these antennas properly to their respecti ve jacks.
CONNECTIONS En 33 This unit is equipped with a Y amaha Parametric Room Acoustic Op timizer (YP A O) that adjusts the status, size, and v olume balance of the speakers in order to provide an optimal sound f ield.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 34 4 Connect the YP AO micr ophone to the YP A O MIC jack on the f ront panel. “Mic On. V ie w ON SCREEN” appears on the front panel display , and the following display appears on the front panel display or TV screen.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 35 6 Press k Cursor B / C to select “Save/Exit” and press k ENTER . 7 Press k Cursor D / E to select “SA VE” and press k ENTER . 8 Press k ENTER . YP A O is automatically terminated.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 36 ■ Revie wing and reloading automatic setup parameters The results of automa tic acoustics measurement can b e revi ewed once measureme nt is complete.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 37 ■ When an error message is display ed during measurement See “Error messages” ( ☞ p. 38 ) for instructions on resolving the problem and measure acoustics again. Check the error code displayed and use YP A O to measure acoustics again as described below .
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 38 ■ Message list ■ When a warning message is display ed before measurement ■ Erro r messages NO TE If the follo wing messages appear, re solve the problems tha t have occurred and carry out the measurement process again.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 39 ■ W arning messages W-1: Out of Phase The speakers disp layed are conn ected wit h the opposite pol arity .
En 40 PLA YBACK 1 T urn on external co mponents (TV , D VD play er , etc.) connected to this unit. 2 Use the d Input selector to select the input source. The name of the selected i nput source is displayed for a fe w seconds. J 1 When DOCK, TUNER, or SI RIUS is selected, the Content window is displayed ( ☞ p.
PLA YBACK En 41 This unit has a SCENE function that allo ws you switch this unit on and change input sources and sound programs with one ke y . Four scenes are a vail able for different uses, such as playing movies or music. The follo wing input sources and sound programs are provided as the initial factory settings.
PLA YBACK Enjoying th e desired sound fi eld effect En 42 Selecting sound pr ogram ( ☞ p. 45 ): MO VIE category: Press g MO VIE repeatedly MUSIC categor y: Press g MUSIC repeatedly Selecting stereo reproduction: Press g MUSIC repeated ly Selecting surround decoder: Press g SUR.
PLA YBACK Enjoying th e desired sound fi eld effect En 43 ■ Enjoying sound pr ograms without surround sound speaker s This unit allo ws you to use virtual surround speake rs to enjoy sound fi eld surround effects, e v en without any surround speakers (V irtual CINEMA DSP mode).
PLA YBACK Enjoying th e desired sound fi eld effect En 44 ■ Enjoying Hi-Fi Sound Quality (Pure Direct mode) Use Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When Pure Direct mode is enabled, this u nit plays back the se lected source with the least circuitry .
PLA YBACK Enjoying th e desired sound fi eld effect En 45 Sound programs ■ Category: MO VIE Sound programs optimized fo r view ing video sources such as mo vies, TV prog rams, and games.
PLA YBACK Enjoying th e desired sound fi eld effect En 46 ■ Category: MUSIC This sound f ield is suitable when liste ning to music sources such as CDs. ■ Category: SUR.DEC (Surround decode mode) Select this program to playback sources with selected decode rs.
PLA YBACK En 47 This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. W ith the OSD, you can view information of the signals being input and the status of this unit. V isual guidance sim plifies operations for menus.
PLA YBACK Configuring the settings o f this unit while view ing the TV screen En 48 ■ Selecting a scene 1 Use k Cursor B / C to select “Scene” and press k ENTER . Scene icons are displayed at the bottom of the TV screen. 2 Use k Cursor D / E to select a scene and press k ENTER .
PLA YBACK En 49 This unit has a unique OPTION menu for each input source. OPTION menus can be used to enable features such as volume trim for c ompatible input sources or to display audio/video data. OPTION menu display and setup OPTION menu operations are displayed on the front panel display or TV screen.
PLA YBACK Configuring setti ngs specific to an indi vidual input source ( OPTION menu) En 50 OPTION menu The following items are pro vided for each input source.
PLA YBACK Configuring setti ngs specific to an indi vidual input source ( OPTION menu) En 51 ■ A uto-adjusting the sound level to make even low v olumes more audible Adaptive D RC Input source: All input sources excep t MUL TI CH Adjusts the dynamic range in conj unction with the volume leve l (from minimum to maximum).
PLA YBACK Configuring setti ngs specific to an indi vidual input source ( OPTION menu) En 52 ■ Adjusting v olume between input sour ces Vol ume T ri m Input source: All Reduces any change in v olume when switch ing between input sources b y correcting vol ume differen ces in each input source.
PLA YBACK En 53 When DOCK, TUNER, or SIRIUS is selected, the Content window is displayed on the TV screen. Playback style for iPod, functions f or FM/AM tuner , and SIRIUS Satellite Radio tuner can be set in the Content window . Displaying the Content window on the TV screen Press d DOCK , d TUNER or d SIRIUS to display the Conten t window .
PLA YBACK En 54 Selecting a frequency for reception (Normal tuning) 1 Press d TUNER to switch to th e tuner input. 2 Press e FM or e AM to select a band to receive . 3 Use e TUN./CH H / I to set a frequency to receive . e TUN./CH H Increases the frequenc y .
PLA YBACK FM/AM tuning En 55 e MEMOR Y e PRESET F / G m Numeric keys MEMORY PRESET 78 56 90 1234 SCENE RETURN VO L U ME ENHANCE R S UR. DE CO DE STRAIGHT SLEEP P URE DIRECT M OVI E M USI C BD DVD TV C.
PLA YBACK FM/AM tuning En 56 Confirming and operating the FM/AM tuner from the Content window The station currently recei ved can be conf irmed from the menu displayed on the TV sc reen. V arious FM/AM tuner operations can be performed from the Content windo w rather than controls on th e front panel display .
PLA YBACK FM/AM tuning En 57 ■ Operating fr om the Content bro wse view a Preset station list The list of preset stations is displayed. b Screen button area Buttons for av ailable opera tions are displayed. See “Screen buttons on the Content browse vie w” for details.
PLA YBACK En 58 T o listen to Satellite Radio, you’ll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready rece iv er . SIRIUS Satellite Radio is a vaila ble to residents of the US (e xcept Alaska and Hawaii) and Canada.
PLA YBACK Listening t o Satellite Radio En 59 Activating SIRIUS Satellite Radio™ subscription Before using the SIRIUS Sa tellite Radio feature, you need to activ ate your SIRIUS Satellite Radio subscription. T o activ ate the subscription you need the Sirius ID which is uniquely assigned to the SiriusConnect tuner .
PLA YBACK Listening t o Satellite Radio En 60 ■ All channel sear ch mode Press e TUN./CH H / I repeatedly to searc h for a channel within all channels. ■ Category sear ch mode 1 Press e CA TEGORY D / E to select the channel category . When you select the category , the first channel in the cate gory is selected.
PLA YBACK Listening t o Satellite Radio En 61 ■ Designating a preset number f or registration Press e MEMOR Y once. Press e PRESET F / G to select the preset number to which the channel wi ll be registered and then press e MEMOR Y to re gister .
PLA YBACK Listening t o Satellite Radio En 62 Displaying the SIRIUS Satellite Radio™ information Y ou can display the SIRIUS Sate llite Radi o information on the front panel display . J 1 ■ Fr ont panel display Press f INFO repeatedly to toggle the SIRIUS Satellite Radio information display modes as shown below .
PLA YBACK Listening t o Satellite Radio En 63 Confirming and operating Sirius Satellite Radio™ from the Content window The Sirius channel currently receiv ed can be confirmed from the menu displayed on the TV screen.
PLA YBACK Listening t o Satellite Radio En 64 5 Use k Cursor B / C to select the channel to be locked and press k ENTER . When k ENTER is pressed, the selected channel is recei ved for confirmation. Each time k ENTER is pressed after that, lock switches between on and off.
PLA YBACK En 65 Once you have connected a Y amaha iPod universal dock (such as the YDS-12, sold separately) to this un it, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit.
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 66 Playing iPod/iPhone from the menu screen (Menu browse control) The iPod/iPhone can be operated from the menu displayed on the TV screen. Y ou can operate the iPod/iPhone from the Now playing vie w or the Content bro wse view .
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 67 Play Control Operates the basic playback functions of iPod/iPhone. Scroll Switches the scroll tar get (artist name, alb um name, or song name). Browse Switches the display to the Content browse vie w .
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 68 Operating basic pl ayback functions via the remote control (Simple remote control) Use the follo wing remote control ke ys to operate (playback, stop, skip, etc.) your iPod/iPhone. Press l REC to enable the Simp le remote control.
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 69 Use iPod/iPhone to start playback. • This unit, which is placed in the main zone, functions as follows when iPod/iPhone controls are used to start playback. – The input source switches to DOCK (iPod) when this unit is turn ed on.
PLA YBACK En 70 Y ou can connect a Y amaha Blue tooth wireless audio rec eiv er (such as th e YB A-10, sold separately) to this unit and enjoy wireles s playback from Bluetooth-compatible portable music players.
PLA YBACK Playing back tu nes from Bl uetooth™ comp onents En 71 5 Make sure the Bluetooth component recognizes the Blue tooth wireless audio receiver . When the device is recognized , it will appear in the Bluetooth component list, for example as “YB A-10 Y AMAHA.
En 72 SETUP Settings, such as the name of an input source or the ic on displayed for an input sourc e can be changed from the Input menu. Configuring input sources The name of an input sour ce an d its icon, as well as other input source settin gs, can be changed from the Input menu displayed on the TV screen .
SETUP Configuring inpu t sources (Input menu) En 73 Input menu ■ Changing an input source name or icon Rename/Icon Select Input source: HDMI1-5, A V1-6, A UDIO1-2, V -A UX, DOCK (iPod), DOCK (Bluetooth), MUL TI CH Changes the input source name (up to nine characters) and icon displayed on the front panel display or TV screen.
SETUP Configuring inpu t sources (Input menu) En 74 ■ Combining HDMI/A V1-2 input source video and audio Audio In Input source: HDMI1-5, A V1-2 Combines video from HDMI or A V input sources with ana.
En 75 SETUP Configuring inpu t sources (Input menu) ■ Setting the interlock functions with iP od/ iPhone (when a Y amaha iP od wireless receiver is connected) iPod Interlock Input source: DOCK (iPo d) This unit can be automatically operated in conjunction with operations on iPod when the iPod wi reless recei ver is connected to this unit.
SETUP En 76 The SCENE function ( ☞ p. 41 ) can be edited from the SCENE menu displayed on the TV screen. Editing a scene V arious set tings, such as the name of a scene or the ic on displayed for a scene, can be changed from the SC ENE menu. 1 Press j ON SCREEN .
SETUP Editing the SCENE function (SCENE menu) En 77 SCENE menu ■ Registering SCENE function settings Save Registers adjustments to SCENE menu setting for each SCENE.
SETUP En 78 Sound effects can be adjusted from the Sound Program menu. Editing sound programs Adjust sound field elements (sound prog ram parameters) to achie ve sound effe cts suited to the ac oustics o f audio/ video sources or rooms if you are not satisfi ed with the results achiev ed with defa ult sound program settings.
En 79 SETUP Setting sound program parameters (Sound Progra m menu) CINEMA DSP parameters DSP Level Change the ef fect le vel (le vel of th e sound f ield effect to be added). Y ou can adjust the level of the sound f ield effect while checking the sound ef fect.
En 80 SETUP Setting sound program parameters (Sound Progra m menu) Liveness Surround Liveness Surround Back Liveness Liv eness. Surround and surround back li veness. Adjusts the reflectivity of the virt ual w alls in the hall b y changing the rate at which the early r eflecti ons decay .
SETUP Setting sound program parameters (Sound Progra m menu) En 81 Reverb Level Rev erberation le vel. Adjusts the v olume of the rev erberation sound. The lar ger the value, the stronger the reverberation becomes. Decode T ype Selects a surround decoder to be us ed with a sound program in the MO VIE category .
SETUP Setting sound program parameters (Sound Progra m menu) En 82 Front Presence R Le vel Adjusts the volume of the front presence R channel. J 1 Parameters usable in surround decoder Decode T y pe Selects a surround decoder . Dolby PLIIx Musi c and Dolby PLII Music onl y Panorama Adjusts the soundscape o f the front sound field.
SETUP En 83 V arious settings, such as speaker volume or HDMI functions, can be changed from the Setup menu. Operating the Setup menu 1 Press j ON SCREEN . 2 Press k Cursor B / C repeatedly to select “Setup” and press k ENTER . 3 Use k Cursor D / E to select a menu and press k ENTER .
En 84 SETUP Setting various fun ctions (Setup menu) Setup menu Manages settings for speakers Speaker Setup items ■ A utomatic speaker se tup Au t o S e tu p Optimizes the speak er configurat ion automatically u sing YP A O ( ☞ p. 33 ). ■ Manual speak er setup Manual Setup The follo wing parameters can be specified m anually .
SETUP Setting various fun ctions (Setup menu) En 85 Configuration Adjusts the output characteristics of the speakers based on manually set parame ters. Front Selects the size (sound reproduc tion capacity) of the front speakers. J 1 Center Selects the size of the center speak ers.
SETUP Setting various fun ctions (Setup menu) En 86 Subwoofer Confirms the su bwoofer . Phase Sets the phase of the subwoofer if the bass audio is lacking or unclear . Extra Bass Allo ws the front channel lo w-frequenc y components to be produced exclusi vely b y the subwoofer , or by both the subwoofer and the front speakers.
SETUP Setting various fun ctions (Setup menu) En 87 Parametric EQ Adjusts sound quality of tone using a parametric equalizer . PEQ Select Select an equalizer type. PEQ Data Copy Select 1 of the 3 parametric equali zer types acquired with automatic setup and manually co py that information to the manual adjustments.
En 88 SETUP Setting various fun ctions (Setup menu) Setting the audio output function of this unit Sound Setup items ■ Synchr onizing audio/video output Lipsync Adjusts the delay betwe en audi o and video output (Lipsync function). Mode Selects a compensation method fo r the delay between audio and video output.
SETUP Setting various fun ctions (Setup menu) En 89 ■ Setting the startup v olume Initial Volume Sets the initial v olume for when this recei ver is turned on. When this parameter is set to “Of f, ” the volume is set at the le vel when the receiv er last entered standby mode.
SETUP Setting various fun ctions (Setup menu) En 90 ■ Adjusting resolution and aspect ratio with con version of video signal to HDMI Processing Adjust resolution and as pect ratio with con ver sion of video input to HDMI video (upscaling).
SETUP Setting various fun ctions (Setup menu) En 91 ■ Receiver operation vi a TV (HDMI Control) HDMI Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (e.
En 92 SETUP Setting various fun ctions (Setup menu) ■ Specify whether or not audio signal is output through this unit and a TV Audio Output Choose whether audio is played back through this unit or through a TV . Amp Specify whether or not audio si gnal is output through this unit.
En 93 SETUP Setting various fun ctions (Setup menu) Making the receiver easier to use Function Setup items ■ Goes enter standb y mode automaticall y when y ou leave it without operating Auto Power D.
SETUP Setting various fun ctions (Setup menu) En 94 ■ Setting TRIGGER OUT functions T rigger Output Sets the TRIGGER OUT jack to function synchronized with power status of each zone or input switching. T rigger Mode Specify the condition for the TRIGGER OUT jack to function.
SETUP En 95 A va riety of information for this unit can be displayed. Selecting information 1 Press j ON SCREEN . 2 Use k Cursor B / C to select “Informati on” and press k ENTER . 3 Use k Cursor D / E to select an Information menu and press k ENTER .
SETUP En 96 Y ou can operate an external comp onent such as TV and DVD player with the remote control of this un it by setting the code for ex terna l component (remote control code).
SETUP Controlling oth er components with the remote cont rol En 97 Default remote control code settings The follo wing remote control codes are assigned to input sources as factory def ault setti ngs. For a complete list of av ailable remote contro l codes, refer to “ Remote Control Code Search ” in the CD-R OM.
SETUP Controlling oth er components with the remote cont rol En 98 4 Enter a remote control code “2064” using m Numeri c keys . J 1 Once the remote control code is registered successfully q SOURCE/REC EIVER will bli nk twice.
SETUP En 99 The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 1 Switch this u nit to the standb y mode. 2 Press MAIN ZONE A while pressing and holding STRAIGHT on the front panel.
SETUP Extended functiona lity tha t can be config ured as needed (Advan ced Setup menu) En 100 A voiding crossing remote control signals when using multiple Y amaha receivers The remote control of th e unit can only receive signals from a receiv er which has an identica l ID (remote control ID).
En 101 SETUP Extended functiona lity tha t can be config ured as needed (Advan ced Setup menu) Changing TV format Change the color encoding form at of OSD to P AL or NTSC (default), to mat ch the format used by the TV connec ted via the HDMI OUT or VIDEO (MONITOR OUT) jack.
SETUP En 102 This unit supports the HDMI Control function, which allo ws you to operate external componen ts via HDMI. If de vices that support HDMI Control (e.
SETUP Using the HDMI Control function En 103 ■ Switching the input sour ce on this unit automatically when listening to TV audio When the HDMI Control ( ☞ p. 102 ) is operating properly , the input source of this unit is automatically changed to match operations carr ied out on the TV .
SETUP Using the HDMI Control function En 104 ■ Single HDMI cable input to TV audio with Audio Return Channel function When using a TV that supports HDMI functions and Audio Return Channel func tion,.
SETUP En 105 This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reprod uce separat e input sources in the main zone and the second zone (Zone2). Y ou can control this unit from the second zone using the supplied remote control.
SETUP Using multi-zone configuration En 106 Controlling Zone2 The remote control can be us ed to select and control Zone2 de vices. The availabl e operations are as follows: • Selecting the input sou rce of Zone2. • T uning into FM or AM when “TUNER” is selected as the input source of Zone2.
En 107 APPENDIX Refer to the table below when this unit does not function properly . If the problem you are experiencing is not listed belo w , or if th e instructions below do not help, turn of f this unit, disconne ct the power cable, and contact the nearest authorized Y amaha dealer or service center .
En 108 APPENDIX Troublesho oting No picture. The vide o signal output from th is unit is no t supporte d by a monitor connected t o this uni t via the HDMI OUT jack. Display s the Advanc ed Setup menu an d select “V IDEO” in “IN IT” to reset the video parameters.
En 109 APPENDIX Troublesho oting HDMI™ The audio input sources cannot be pla yed in the desi red digital audio signal forma t. The connect ed componen t is not set to output the desired digital audio signal s. Set the pl ayback component properly referring to its ins truction man ual.
En 110 APPENDIX Troublesho oting T uner (FM/AM) FM AM SIRIUS Satellite Radio™ Problem Cause Remedy See page FM stereo reception is noisy . Y ou are too far from the station transmitter , or the inpu t from the antenna is weak. Check the a ntenna connecti ons.
En 111 APPENDIX Troublesho oting iPod™/iPhone™ ACQUIRING The signal is too we ak. Adjust the orientati on of the a ntenna of the SiriusConn ect tuner. Check the antenna reception level from the Antenna informatio n on the f ront panel display , or the SIRIUS I nformation screen on the TV screen.
En 112 APPENDIX Troublesho oting Bluetooth™ Remote control Display Cause Remedy See page Searching... The Y amaha Bluetooth wi reless audio receiver and the Bl uetooth component ar e in the pr ocess of pairing . — The Y amaha Bluetooth wire less audio receiver and the Bl uetooth component ar e in the pr ocess of establishin g a connection .
APPENDIX En 113 Audio information Audio and video sync hronization (Lipsync) Lip sync, an abbrev iation for lip synchr onization, is a technical term that in volves both a problem, and the capab il ity of maintaining audio and video signals synchronized during po st-p roduction and transmission.
APPENDIX Glossary En 114 DSD Direct Stream Digital (DSD) technolo gy stores audio signals on digital storage media, such as Super Audi o CD s. Using DSD, signals are stored as single bit values at a high-frequ ency sampling rate of 2.
APPENDIX Glossary En 115 “x.v .Color” A color space standard supported by HDMI version 1.3. It is a more extensi ve color space than sRGB, and al l ows the ex pression of colors that were not hitherto possible. While re maining compatible with the color gamut of sRGB standards, “x.
APPENDIX En 116 ■ HDMI signal compatibility Audio signals • If the input source comp onent can de code the bitstream au dio signal s of audio c ommentari es, you can p layback the audio sources wi th the audi o commenta ries mixed down by using the d igital aud io input ( optical or co axial) con nections.
APPENDIX En 117 ■ Input jacks • Analog audio [U.S.A. and Canada models] Audio x 5 (A V5, A V6, A UDIO1, A UDIO2, V -A UX) MUL T I CH INPUT x 1 (8ch Input) [Others models] Audio x 6 (PHONO, A V5, A.
APPENDIX En 118 • Input Sensiti vity/Input Impedance [U.S.A. and Canada models] A V5, etc. .. ............ .......... .......... ............ ......... ............ . 200 mV/47 k Ω MUL TI C H IN ..... .......... ............ .......... ......... ..
APPENDIX En 119 Numerics 5 channel speaker layout ...... ................................. .................. ..... 15 5.1-channel speaker layout..... ........... ........... ........................... ..... 15 7.1-channel speaker connect ion .......
APPENDIX Index En 120 Lipsync, Sound Setup ............ ...................... ........................... ..... 88 Liveness, Sound Program menu ...................... ............ ........... ..... 80 Load, SCENE m enu ........ ........... ..........
APPENDIX Index En 121 Volume Trim, OPTION me nu . ........... ........... ........... ........... ........ 52 Y YPAO . ......... ......... ......... ......... ........... ......... ......... ......... ........ ........ 33 Z Zone2 Set, Mul ti Zone ....
© 2010 Yamaha Corporation YC513D0/OMEN1.
PU SH 1 3 2 2 within 20 feet (6 m) - 1 - English Quick Reference Guide for U .S.A. Ex. Ex. Pr eparing the r emote contr ol ■ Accessor ies ■ Items necessary f or connection The f ollowing accessories are supplied with this pr oduct. Speaker s External components Remote control Front speaker Ex.
6.1 7.1 7.1 - 2 - Connect and inst all as follo ws the r st time y ou use this unit. See the f ollowing e xplanations f or the connections f or each number .
T I C H I N P U T HDMI 2 HDMI 3 HDMI 4 HDMI 5 CENTER SURROUND SURROUND BACK/BI-AMP SINGLE FRONT SUBWOOFER SUR.BACK N D G ER OUT +12V 0.1A MAX. CENTER M OTE AUDIO OUT ZONE2 OUT SURROUND SUR.BACK PRE OUT SUBWOOFER 1 2 FRONT CENTER SINGLE SPEAKERS T I C H I N P U T H D M I 2 H D M I 3 H D M I 4 H D M I 5 S U B W O O F E R S U R .
DOCK OPTICAL ( TV ) AV 3 AV 1 AV 2 AV 4 AV 5 AV 6 AUD IO 1 AUDIO 2 M ULTI C H I N COAXIAL ( CD ) COAXIAL OPTICAL VIDEO HDMI 1 ( BD/DVD ) H COMPONENT VIDEO P R P B Y HDMI OUT AV OUT S U SURROUND TRIGGER OUT +12V 0.
DOCK OPTICAL ( TV ) A V 3 A V 1 A V 2 A V 4 A V 5 A V 6 A UD I O 1 A UD I O 2 M U LT I CH I N PU T COAXIAL ( CD ) COAXIAL OPTICAL VIDEO HDMI 1 ( BD/DVD ) HDMI 2 COMPONENT VIDEO P R P B Y HDMI OUT AV OUT S U SUR.BACK SURROUND TRIGGER OUT +12V 0.1A MAX.
Continues to the next page - 6 - When all connections ar e complet e, adjust the con guration, sizes , and volume balance of the speaker s t o pro vide an optimal sound eld. This unit is equipped with a Y amaha P arametric Room Acoustic Optimiz er (YP AO) function that adjusts the speak er balance automaticall y with a simple pr ocedure .
- 7 - SCENE RETURN VOLUME ENHANCER SUR. DECODE STRAIGHT SLEEP PURE DIRECT HDMI AV AUDIO 1234 12 5 V-A U X FM INFO MEMORY AM PRESET MOVIE MUSIC BD DVD TV CD RADIO MUTE ENTER 78 56 90 10 1234 REC ENT TV.
SCENE RETURN VOL U ME ENHANCER SUR. DECODE STRAIGHT SLEEP PURE DIRECT HDMI AV AUD I O 1234 12 5 V- AU X FM INFO MEMORY AM PRESET MOVIE MUSIC BD DVD TV CD RADIO MUTE ENTER 78 56 90 10 1234 REC ENT TV T.
- 1 - TV A.R. Sy stems 0320 Acme 0342 Acura 0323, 03 43 ADC 0337 Admiral 0054, 0178, 0336 , 0337, 0339, 0346 , 0347 Adve nt 0158 Adventura 0057 Adyson 0277, 0282, 0342 Agashi 0277, 028 2 Agazi 0337 Ai.
- 2 - Genexxa 0320, 0340, 0347, 0350 GFM 0128, 02 27 Giant 0282 Gibralter 0008, 0030, 0050, 0062 GoldHand 0277 Goldline 0320 GoldStar 0007, 0008, 0012 , 0026, 0031, 0050 , 0053, 0161, 0277 , 0282, 032.
- 3 - 0239, 0256, 0257 , 0259, 0261, 0263 , 0267, 0280, 0281 , 0287, 0296, 0299 , 0301, 0303, 0305 , 0313, 0319, 0320 , 0324, 0333, 0339 , 0342, 0349, 0350 , 0353, 0357, 0360 , 0380, 0383, 0452 , 0459.
- 4 - Y amaha 0008, 0026, 0050, 0053, 0080, 0081 , 0082, 0083, 0086 , 0087 Y amishi 0282, 0320 Yo k a n 0 3 2 0 Y oko 016 1, 0277, 0282, 0320, 0323, 0337 , 0340, 0342, 0343 , 0349, 035 0 Y orx 0340 Za.
- 5 - Sinudyne 1028 So lavo x 103 0 Sonic Blue 1022, 1123 Sonneclair 1008 Sonoko 1009, 1025 Sontec 1031 Sony 1001, 1016, 1048 , 1053, 1073, 1074 , 1080, 1081, 1082 , 1083, 1108, 1118 , 1216 Stack 1016.
- 6 - 2309, 2310, 2311 , 2344, 2345, 2347 , 2379 Pointer 2362 Polaroid 2125, 2215, 2235 Portland 2362 Pow erpoint 2363 Prima 2 252 Proceed 2130 Proscan 2156 Prosonic 2360, 2377 Protron 2202 Provisi on.
- 7 - To c o m 3 0 6 7 T orx 3017 To s h i b a 3 1 2 2 T ristar 3127 T udi 3102 T usa 3072, 3123 TV86 3077 Unika 3065, 30 70 United Cable 3018, 3119 Universal 3065, 30 70 Universum 3097, 3099 V2 3127 .
- 8 - Quadral 4024, 4007, 4005, 4008, 421 6 Quelle 4015, 42 15, 4219 Quiero 4052 RadioSha ck 4019 Radiola 4055, 4053 Radix 4014, 4037 Rainbo w 4004 RCA 4093, 4066, 4112 , 4113, 4118, 4119 , 4116, 4122.
A V Receiver English Safety Br ochure.
2 En • Explanation of Graphical Symbols The lightning flash with arro whead symbol, within an equilateral triangl e, is intended to alert you to t he presence of uni nsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of elec tric shock to persons.
3 En 1 T o assure the f inest performance, please read this manual carefully . Keep it in a safe place for future reference. 2 Install this sound system in a well v entilated, cool, dry , clean place - aw ay from direct sunlight, heat sources, vibra tion, dust, moisture, and/or cold.
4 En ■ Notes on remote controls and batteries • Do not spill w ater or other liquids on the remote control. • Do not drop the remote control . • Do not lea ve or store the remote control in th.
5 En Limited Guarantee for Eur opean Ec onomic Area (EEA) and Switz erland Thank you for having chosen a Y amaha product. In the unlikely ev ent that your Y amaha product needs guarant ee service, please co ntact the dealer from whom it was purchased.
© 2010 Yamaha Corporation YC513A0/SBEN.
Een belangrijk punt na aankoop van elk apparaat Yamaha RX-V667 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha RX-V667 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha RX-V667 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha RX-V667 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha RX-V667 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha RX-V667 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha RX-V667 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha RX-V667 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.