Gebruiksaanwijzing /service van het product SW1000XG-E van de fabrikant Yamaha
Ga naar pagina of 48
PCI AUDIO MIDI CARD OWNER'S MANUAL SW1000XG-E.qx 4/2/99 4:31 PM Page 1.
2 CANAD A This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 1. IMPORT ANT NO TICE: DO NO T MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Intr oduction Thank you very much for purchasing Y amaha’s SW1000XG. In this package you will find a sound card that offers both high quality XG sound and a com- plete digital audio environment.
4 SW1000XG F eatur es A WM W ave T able • Using the A WM2 (Advanced W ave Memory 2) tone generator , the wave table built into the SW1000XG offers high quality sound with 1267 normal voices and 46 drum kits playing with 32 part/64 polyphony (the maximum number of simultaneous sounds).
T a b le of Contents Introduction .......................................................................................................3 Special Notices ................................................................................................
Bef or e Using Package Contents Befor e using your new SW1000XG, check that all the items below are included in the package. In the rare case that some item is missing, contact the store where you purchased your sound card as soon as possible.
Intr oducin g the Included Softw are The software programs that are included in this package are introduced here. For information about installing each of them, see “Installation of the Software” on page 16. • XGworks for SW1000XG This is MIDI sequence software for Windows 95.
• DX Simulator The DX Simulator is editing software for the optional PLG100-DX board ( → P . 24) sold sepa- rately. Using exactly the same user interface as the famous Y amaha DX7, you can create finely- crafted sounds. For detailed information on using this program, install the software, then start the DX Simulator in XGworks.
9 SW1000XG Sound Card Connections The T er minals on the SW1000XG Befor e handling the sound card, make sure to eliminate any static electricity in your clothes or body by touching a metal surface that is definitely grounded. Also, be careful to avoid touching any parts on the sound card’s circuit board, or any of the connectors.
Installing Y our Sound Card The SW1000XG sound card can be installed in your computer by simply following these steps: n Before installing your sound card, check to be sure that there is an empty PCI card slot in your computer .
4. Remove the sound card from its anti-static bag. Before handling the sound card, make sure to eliminate any static electricity in your clothes or body by touch- ing a metal surface that is definitely grounded. Also, be careful to avoid touching any parts on the sound card’s circuit board, or any of the connectors.
12 Installing the Plug-In Board Refer to the illustration below to install an optional plug-in board (PLG100 series). Making sure that the plug-in board is facing in the correct direction, carefully press the cable from the plug-in board into the plug-in board connector on the sound card.
Installation of the Dr i v er T o use SW1000XG sound card, the appropriate driver (SW1000XG Windows95 Driver) should be properly installed in your computer .
14 3. Click [Other Locations]. Select Other Location dialog box will be displayed. 4. Type the name of the CD-ROM drive (E:, F:, etc.) and the folder (Win95drv) in the “Location” box. e.g. E:Win95drv, F:W in95drv 5. Click [OK]. The message saying “Windows found the following updated driver for this device” will be displayed.
7. Click [OK]. Copying Files dialog box will be displayed. 8. Type the name of the CD-ROM drive and the folder in the “Copy files from:” box, as you did in step 4. e.g. E:Win95drv, F:W in95drv 9. Click [OK]. Files will be copied. 10 . Restart the computer .
Installation of the Softw are This package contains software which can bring out full advantage of the SW1000XG sound card, including MIDI sequence software XGworks for SW1000XG, W ave Editor TWE and various XG plug-in software. This section explains you how to install them from the supplied CD-ROM.
17 4. Click [Next]. Software License Agreement dialog box will appear . Read this thoroughly before moving on to the next step. 5. Click [Y es]. Choose Destination Location dialog box will appear . If you want to change the destination, click [Browse] and select the destination.
7. Click [Next]. Select Components dialog box will appear . Y ou can select the preferred applica- tion language version. 8. Click [Next]. Select Program Folder dialog box will appear . Y ou can change the folder name to which the program will be installed.
19 Installing XG Plug-In Software The following software can be installed by following the steps described below. For information on each software, see page 7.
5. Click [Y es]. Before Setup dialog box will appear . Read this thoroughly before moving on to the next step. 6. Click [Y es]. Language dialog box will appear . Y ou can select the preferred application lan- guage version. 7. Click [Next]. Programs dialog box will appear .
8. Click [Next]. Choose Destination Location dialog box will appear . If you want to change the destination, click [Browse] and select the destination. n T o use XG plug-in software on XGworks, these plug-ins should be installed in the folder containing XGworks.
SW1000XG Ov er vie w and F eatur es Sound Module Modes The SW1000XG features both XG and TG300B sound module modes. Normally, the SW1000XG plays in XG mode.
Maximum Polyphony The SW1000XG can play a maximum of 64 notes polyphony at once. However , the actual num- ber of notes that will play at any given time is determined by the number of elements in use across the 32 Parts. For example, if you use only one-element V oices, you can achieve the full 64 notes maximum polyphony.
A/D Input The SW1000XG features A/D Input jack for connection of external audio sources such as a micro- phone, guitar , bass, or CD player . Audio signal received via A/D INPUT jack is processed through the effect sections and mixed with the internal A WM2 voices of the SW1000XG.
25 Supplementar y Items f or XGw or ks 2.0 The XGworks for SW1000XG software that is included in this package has been specially tailored to work with the SW1000XG. For that reason, you will find here an introduction to some func- tions and some supplementary information not included in the XGworks 2.
26 Device Selection When using the SW1000XG sound card, select the devices as follows: •MIDI In Select “SW1000 MIDI IN.” When you are going to connect an external MIDI keyboard to the sound card.
MIDI Out Filter Page on the System Setup Dialog The Realtime Message item has been added. By checking a box, output of realtime messages can be prevented. When the box is not checked (when output is permitted), the messages will be output on MIDI Out port number 1 (set on the Device page of the System Setup dialog).
28 T rack View Window T rack Parameter Section The T rack Parameter Ch (channel) display has been changed to the Ch/Pan display, and the fol- lowing function has been added: n For details about the T rack View Window, see page 41 of the XGworks V2.0 Owner’s Manual.
29 XG Editor Window The following functions have been added to the XG Editor Window: n The XG Editor Window is opened by clicking the XG Editor W indow button on the toolbar. For details about the toolbar , see page 13 of the XGworks V2.0 Owner’s Manual.
30 Audio Input Category Dialog Category For each of the parts 1 to 16 displayed in the Part Unit, select the category of the audio sig- nal to be sent to the sound card. By clicking the up and down scroll buttons, you can select from categories such as Off, Analog, or PCI.
W ave Data Can Also Be Saved in a Song As explained in the section “Saving the Song” on page 40 of the XGworks V2.0 Owner’s Manual, songs that include wave data must be saved as .XWS files (XGworks original song file). However the wave data (.W A V file) itself was not included in the conventional type of .
For detailed information about using W ave Editor TWE after installation, click on the [Start] button in Windows 95, then select [Y AMAHA XGworks for SW1000XG] from the [Program] menu. Selecting [W A VE Editor TWE Manual] will display the online manual for the wave editor (PDF file).
33 Name and Function of Every Part T itle Bar On the title Bar , there are the application icon, and the Minimize, Maximize and Close buttons. For details about the title bar , see P . 199 of the XGworks V2.0 Owner’s Manual. T oolbar 1 Open Button This opens the [Open] (file open) dialog.
34 Setup Dialog P or t …………… Click on the box, then select the MIDI port from the drop-down list that is displayed. Control operations done in the SW1000XG Mixer will be sent as MIDI information to the audio parts of the XG tone generator corresponding to the port selected here.
35 Audio Preset Dialog Audio Source Category List Displays the category of the audio signal. In order to apply appropriate effects to the audio signal, one of the categories on this list must first be selected by clicking on it. Once a category is selected, a list of effect names included in that category will appear in the effect list below.
36 5 Send Button When you click on this button, the setting information in the SW1000XG Mixer is sent as MIDI data through the MIDI output port selected in the Setup dialog ( → P . 34) to the XG tone gener- ator (sound card). 6 Inser t Button Opens the Insert Dialog.
37 If any knob or slider is operated (clicked or dragged) while pressing the <Ctrl> key on the computer keyboard, the knobs and sliders belonging to every part that is input into the SW1000XG so.
38 Input Category Dialog Click one of the boxes for Parts 1 to 14, then select the type of audio signal to be controlled in that part from the drop-down list that is displayed. “Analog” is for when an audio signal from the external audio input (A/D input) terminal is input to the SW1000XG sound card.
39 6 V ar iation Knob (V ar) This is used to set the depth of V ariation ef fects for each part. As the knob is rotated to the right by dragging it, the V ariation ef fects will deepen. When the knob is all the way to the left, the V ariation effects will be zero.
40 MIDI Implementation Char t YAMAHA [ PCI Audio MIDI Card ] Model SW1000XG MIDI Implementation Chart Date :01-JUN-1998 Version : 1.0 Function... Transmitted Recognized Remarks Basic Channel Default C.
41 Prog Change : True # System Exclusive : Common : : Song Pos. Song Sel. Tune System : Real Time: Clock Commands Aux : All Sound Off : Reset All Cntrls : Local ON/OFF Mes- : All Notes OFF sages : Active Sens : Reset Notes: *1 receive if switch is on.
Specif ications of the SW1000XG Sound Card System Requirements CPU: P entium/166MHz or greater Memor y: 32MB or more Hard disk: 20MB or more Operating system: Windo ws95 PCI slot CD-R OM dr ive (f or software installation) Other equipments (mouse, audio speakers, headphones, etc.
T r oub leshooting Even though the SW1000XG sound card is easy to use, it may occasionally not function as you expected it to. If that happens, check the possible problems and solutions below before assuming the instrument is faulty. ■ Song data with an XG/GM mark does not play correctly.
■ V olume is low. • Is v olume or e xpression set too low in the par t control? • Ar e the v elocity sense settings in the par t edit made incorrectl y? • Is the MIDI volume inf or mation not being received? ■ Distorted sound/weak sound on the A/D input • Is the input source selected correctl y? ( → P .
■ No sound is output when wave data is played • If the wav e data is being play ed with standard W indo ws wave pla ybac k softwar e (such as the Sound Recor der), the wave data is output to the destination speci - fied in the multimedia properties (audio) dialog.
For details of products, please contact your nearest Y amaha or the authorized distributor listed below . Pour plus de détails sur les produits, veuillez-vous adresser à Y amaha ou au distributeur le plus proche de vous figurant dans la liste suivante.
47 SW1000XG-E.qx 4/2/99 4:32 PM Page 47.
M.D.G., EMI Division, ©Y amaha Corporation 1998 SW1000XG-E.qx 4/2/99 4:32 PM Page 48.
Een belangrijk punt na aankoop van elk apparaat Yamaha SW1000XG-E (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha SW1000XG-E heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha SW1000XG-E vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha SW1000XG-E leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha SW1000XG-E krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha SW1000XG-E bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha SW1000XG-E kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha SW1000XG-E . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
