Gebruiksaanwijzing /service van het product YFM350XR(C) van de fabrikant Yamaha
Ga naar pagina of 174
5NF-28199-12 LIT-11626-16-08 READ THIS MANUAL CAREFULLY! It contains important safety information. This ATV should not be ridden by anyone under 16 years of age. WARNING YFM350XR(C) OWNER’S MANUAL PRINTED IN JAPAN 2002.04-3.0 × 1 CR (E) PRINTED ON RECYCLED PAPER Y AMAHA MO T OR CO .
EBU00776.
EBU00941 1- INTRODUCTION Congratulations on your purchase of the Yamaha YFM350X. It repre sents the result of many years of Yamaha experience in the production of fine sporting, touring, and pace-setting racing machines.
EBU00801 1- IMPORTANT MANUAL INFORMATION FAILURE TO FOLLOW THE WARNINGS CONTAINE D IN THIS MANUAL CAN RESULT IN SERIOUS INJURY OR DEATH. Particularly important information is distinguished in this man.
EBU00011 IMPORTANT NOTICE This machine is designed and manufactured for OFF-ROAD use only. It is illegal and unsafe to operate this machine on any public street, road or highway. This machine complies with all applicable OFF-ROAD noise level and spark arrester laws and regulations in effect at the time of manufacture.
EBU00014 W ARNING Indicates a potential hazard that could result in serious injury or death. CONTENTS LOCATION OF THE WAR NING AND SPECIFICATION LABELS................ 1-1 SAFETY INFORMATION.................. 2-1 DESCRIPTION AND MA CHINE IDENTIFICATION .
PRE-OPERATION CHECKS ........... 5-1 Front and rear brakes ..................... 5-3 Fuel ................................................. 5-5 Engine oil ........................................ 5-7 Chain .............................................
PERIODIC MAINTENAN CE AND ADJUSTMENT .................................. 8-1 Owner’s manual and tool kit . ........... 8-1 Periodic maintenance/ lubrication ...................................... 8- 3 Engine oil ......................................
CLEANING AND STORAGE ............ 9-1 A. Cleaning............ .......................... 9-1 B. Storage ........................... ............ 9-3 SPECIFICATIONS.. ........................ 10-1 NOISE REGULATION .................... 11-1 MAINTENANCE RECORD .
1-1 EBU00464 LOCATION OF THE WARNING AND SPECIFICATION LABELS U5NF12.book Page 1 Wednesday, M ay 8, 2002 11:11 AM.
1-2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Read and understand all of the labels on your machine. They contain important information for safe and proper operation of your ATV. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, a replacement label is available from your Yamaha dealer.
1-3 4 6 5 UNDER WARNING 5FE-21697-01 NEVER operate this ATV if you are under age 16 . Operating this ATV if you are under the age of 16 increases your chance of severe injury or death.
2-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SAFETY INFORMATION EBU00924 AN ATV IS NOT A TOY AND CAN BE HAZARD OUS TO OPERATE. An ATV handles differently from other vehicles including motorcycles and cars.
2-2 ● Always avoid operating an ATV on any paved surfaces, including sidewalks, driveways, park- ing lots and streets. ● Never operate an ATV on any public street, road or highway, even a dirt or gravel one. ● Never operate an ATV without wearing an approved motorcycle helmet that fits properly.
2-3 ● Always follow proper procedures for turning as described in this manual. Practice turning at low speeds before attempting to turn at faster speeds. Do not turn at excessive speed. Never op- erate the ATV on hills too steep for the ATV or for your abilities.
2-4 ● Always use proper procedures if you stall or roll backwards when climbing a hill. To avoid stall- ing, use proper gear and maintain a steady speed when cli mbing a hill. If you stall or roll back- wards, follow the special procedure for braking described in this manual.
2-5 ● Always use the size and type tires specified in this manual. ● Always maintain proper tire pressure as described in this manual. ● Never modify an ATV through improper installation or use of accessories. ● Never exceed the stated load capacity for an ATV.
2-6 WA R N I N G POTENTIAL HAZARD Improper handling of gasoline. WHAT CAN HAPPEN Gasoline can catch fire and you could be burned. HOW TO AVOID THE HAZARD Always turn off the engine when refuel- ing. Do not refuel right after the engine has been running and is still very hot.
2-7 WA R N I N G POTENTIAL HAZARD Starting or running the engine in a closed area. WHAT CAN HAPPEN Exhaust fumes are poisonous and may cause loss of consciousness and death within a short time. HOW TO AVOID THE HA ZARD Always operate your ATV in an area with adequate ventilation.
3-1 EBU00032 DESCRIPTION AND MACHINE IDENTIFICATION 1. Spark arrester 2. Seat 3. Drive select lever 4. Fuel tank cap 5. Main switch 6. Brake ped al 7. Headli ghts 8. Front wheel 9. Fuel cock 10. Rear wheel 11. Shift p edal 12. Starter (choke ) 13. Clutch leve r 14.
3-2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 EBU00600 Identification number records Record the key identification number, vehicle identification number and model label infor- mation in the spaces provided for assistance when ordering spare parts from a Yamaha dealer or for reference in case the vehicle is stolen.
3-3 EBU00036 Vehicle identification number The vehicle identification number is stamped into the frame. 1. Vehicle identification number N O TE: The vehicle identification number is used to identify your machine. EBU00787 Model label The model label is affixed to the location in the illustration.
4-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 EBU00039 CONTROL FUNCTIONS W ARNING Indicates a potential hazard that could result in serious injury or death. EBU00942 Main switch Functions of the respective swi.
4-2 EBU00043 Indicator lights 1. Reverse indicator light “ R ” 2. Neutral indicator light “ N ” EBU01161 Reverse indicator light “ R ” This indicator light comes on when the drive select lever is in the reverse position. EBU00603 Neutral indicator light “ N ” This indicator light comes on when the trans- mission is in neutral.
4-3 CAUTION: _ Do not use the headlights with the engine turned off for more than thirty minutes. The battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. _ EBU01158 Engine stop switch “ ENG.
4-4 EBU00062 Throttle lever Once the engine is running, movement of the throttle lever will increase the engine speed. Regulate the speed of the machine by varying the throttle position. Because the throttle is spring-loaded, the machine will decelerate, and the engine will return to an idle any time the hand is removed from the throttle lever.
4-5 EBU01159 Speed limiter The speed limiter keeps the throttle from fully opening, even when the throttle lever is pushed to the maximum. Turning in the ad- justing screw limits the maximum engine pow- er available and decreases the maximum speed of the ATV.
4-6 EBU00069 Clutch lever The clutch lever is located on the left handle- bar and the ignition circuit cut-off system is in- corporated in the clutch lever holder. Pull the clutch lever to the handlebar to disengage the clutch, and release the lever to engage the clutch.
4-7 EBU00989 Brake pedal The brake pedal is located on the right side of the machine. Push down on the pedal to apply the rear brake. 1. Brake pedal U5NF12.
4-8 EBU00080 Parking brake Use the parking brake when you have to start the engine or park the machine, especially on a slope. Squeeze the clutch lever while push- ing the button, then push in the lock plate to apply the parking brake. Squeeze the clutch lever to release the parking brake.
4-9 EBU0008 2 Shift pedal This machine is equipped with a constant- mesh 6-speed transmission. The shift pedal is located on the left side of the engine and is used in combination with the clutch when shifting. 1. Shift pedal WA R N I N G POTENTIAL HAZARD Improper use of the parking brake.
4-10 EBU00085 Drive select lever The drive select lever is used for driving the machine either forward or in reverse. Refer to page 6-4 for drive select lever operation. 1. Drive sele ct lever EBU00092 Fuel tank cap Remove the fuel tank cap by turning it coun- terclockwise.
4-11 EBU00093 Fuel cock The fuel cock supplies fuel from the fuel tank to the carburetor. The fuel cock has three positions. OFF: With the lever in this position, fuel will not flow. Always turn the lever to this position when the engine is not running.
4-12 EBU00094 Starter (choke) Starting a cold engine requires a richer air-fuel mixture. A separate starter circuit supplies this mixture. Move in direction a to turn on the starter (choke). Move in direction b to turn off the starter (choke). Refer to “ Starting a cold engine ” for proper op- eration.
4-13 To install the seat, insert the projections on the front of the seat into the seat holders and push down on the seat at the rear. N O TE: Make sure that the seat is securely fitted.
4-14 EBU01104 Front shock absorber adjustment The spring preload can be adjusted to suit the rider ’ s weight and riding conditions. Adjust the spring preload as follows. To increase the spring preload, turn the ad- justing ring in direction a . To decrease the spring preload, turn the ad- justing ring in direction b .
4-15 WA R N I N G POTENTIAL HAZARD Improper shock absorber adjustment. WHAT CAN HAPPEN Uneven adjustment can cause poor handling and loss of stability, which could lead to an accident. HOW TO AVOID THE HAZARD Always adjust the shock absorbers on the left and right side to the same set- ting.
4-16 EBU01164 Rear shock absorber adjustment The spring preload and damping force of the rear shock absorber can be adjusted to suit the ride r ’ s weight and riding conditions.
4-17 NO TE: _ A special wrench can be obtained at a Yamaha dealer to make this adjustment. _ 1. Special wrench 3. The length of the spring (installed) changes 1 mm (0.04 in) per turn of the adjusting ring. A. S pring length Measurement A : Installed length: Standard: 228.
4-18 CAUTION: _ Never attempt to turn the adjusting ring beyond the maximum or minimum set- tings. _ 4. Tighten the locknut to the specified torque. CAUTION: _ Always tighten the locknut against the spring preload adjusting ring, and then tighten it to the specified torque.
4-19 CAUTION: _ Never attempt to turn either adjusting mechanism beyond the maximum or mini- mum settings. _ EBU0011 2 W ARNING Indicates a potential hazard that could result in serious injury or death.
5-1 PRE-OPERATION CHECKS Before using this machine, check the following points: ITEM ROUTINE PAGE Brakes • Check operation, fluid level an d fluid leakage. • Fill with DOT 4 brake fluid if necessary. 5-3 – 5-4, 8-17 – 8-22 Clutch • Check operation, condition and lever free pla y.
5-2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WA R N I N G POTENTIAL HAZARD Failure to inspect the ATV before oper- ating. Failure to properly maintain the ATV.
5-3 EBU01166 Front and rear brakes Brake lever and brake pedal ● Check that there is no free play in the brake lever. If there is free play, have a Yamaha dealer inspect the brake system. ● Check for correct brake pedal height. (See page 8-22.) If the pedal height is incorrect, have a Yamaha dealer adjust it.
5-4 WA R N I N G POTENTIAL HAZARD Riding with improperly operating brakes. WHAT CAN HAPPEN You could lose braking ability, which could lead to an accident. HOW TO AVOID THE HAZARD Always check the brakes at the start of every ride. Do not ride the ATV if you find any problem with the brakes.
5-5 EBU01085 Fuel Make sure there is sufficient gasoline in the tank. CAUTION: _ Use only unleaded gasoline. The use of leaded gasoline will cause severe damage to internal engine parts, such as the valves and piston rings, as well as to the exhaust system.
5-6 Gasohol There are two types of gasohol; gasohol con- taining ethanol and that containing methanol. Gasohol containing ethanol can be used if ethanol content does not exceed 10%. Gaso- hol containing methanol is not recommended by Yamaha because it may cause fuel system damage or vehicle performance problems.
5-7 EBU01084 Engine oil Make sure the engine oil is at the specified level. Add oil as necessary. (See page 8-5.) CAUTION: _ ● In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives.
5-8 EBU00498 Chain Check the general condition of the chain and check the chain slack before every ride. Lubri- cate and adjust the chain as necessary. (See pages 8-27 – 8-30 for details.) EBU01083 Throttle lever Check to see that the throttle lever operates correctly.
5-9 EBU00157 Tires WA R N I N G POTENTIAL HAZARD Operating this ATV with improper tires, or with improper or uneven tire pres- sure. WHAT CAN HAPPEN Use of improper tires on this ATV, or op- eration of this ATV with improper or un- even tire pressure, may cause loss of control, increasing your risk of acci- dent.
5-10 EBU00159 How to measure tire pressure Use the low-pressure tire gauge. N O TE: The low-pressure tire gauge is included as standard equipment. Make two measure- ments of the tire pressure and use the second reading. Dust or dirt in the gauge could cause the first reading to be incorrect.
5-11 EBU00160 Tire wear limit When the tire groove decreases to 3 mm (0.12 in) due to wear, replace the tire. a. 3 mm (0.12 in) U5NF12.book Page 11 Wednesday, May 8 , 2002 11:11 AM.
6-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 EBU00161 OPERATION W ARNING Indicates a potential hazard that could result in serious injury or death. EBU0051 3 Starting a cold engine 1. Set the parking brake. 2. Turn the fuel cock to “ ON ” . 3. Turn the main switch to “ ON ” and the en- gine stop switch to “ RUN ” .
6-2 NO TE: _ This model is equipped with an ignition circuit cut-off system. The engine can be started un- der the following conditions. ● When the transmission is in neutral. At this time the neutral indicator light should come on. If the light does not come on, ask a Yamaha dealer to inspect it.
6-3 NO TE: _ If the engine fails to start, release the start switch, then push it again. Pause a few sec- onds before the next attempt. Each cranking should be as short as possible to preserve battery energy. Do not crank the engine more than 10 seconds on each attempt.
6-4 EBU01172 Drive select lever operation and reverse driving CAUTION: _ Before shifting, stop the machine and re- turn the throttle lever to its closed posi- tion, otherwise the transmission may be damaged. _ NO TE: _ When shifting into reverse, the clutch must be disengaged.
6-5 EBU0117 3 Shifting This model has a 6-speed forward and 1-speed reverse transmission. The transmis- sion allows you to control the amount of pow- er you have available at a given speed or for starting, accelerating, climbing hills, etc.
6-6 CAUTION: _ ● Do not coast for long periods with the engine off, and do not tow the ma- chine a long distance. Even in neutral position, the transmission is only properly lubricated when the engine is running. Inadequate lubrication may cause damage.
6-7 8. Follow the same procedure when shifting to the next higher gear. EBU0020 7 To decelerate: When slowing down or stopping, release the throttle and apply the brakes smoothly and evenly. As you slow down, shift to a lower gear. Be sure that the engine has sufficiently slowed before engaging a lower gear.
6-8 EBU00209 Engine break-in There is never a more important period in the life of your machine than the period between zero and 20 hours. For this reason, we ask that you carefully read the following material. Because the engine is brand new, you must not put an excessive load on it for the first several hours of running.
6-9 EBU00211 Parking When parking, stop the engine and shift into neutral. Turn the fuel cock to “ OFF ” and apply the parking brake. 1. Button 2. Lock plate 1.
6-10 EBU01174 Parking on a slope 1. Bring the machine to a stop by applying the brakes in low gear. 2. Stop the engine and release the clutch lever. 3. With the rear brake applied, apply the parking brake and slowly release the brake pedal. WA R N I N G POTENTIAL HAZARD Parking on a hill or other incline.
6-11 EBU00221 Accessories and loading EBU00222 Accessories Accessories can affect the handling and con- trol of your ATV. Keep the following in mind when considering an accessory or operating an ATV which has accessories. ● Choose only accessories designed for your ATV.
6-12 EBU00584* Loading As originally equipped, this ATV is not de- signed to carry cargo or tow a trailer. If you choose to add accessories so that you can carry cargo or tow a trailer, you must use common sense and good judgment. Keep the following points in mind: ● Never exceed the weight limits shown.
6-13 WA R N I N G POTENTIAL HAZARD Overloading this ATV or carrying or tow- ing cargo improperly. WHAT CAN HAPPEN Could cause changes in vehicle han- dling which could lead to an accident. HOW TO AVOID THE HAZARD Never exceed the stated load capacity for this ATV.
6-14 EBU01176 W ARNING _ Indicates a potential hazard that could result in serious injury or death. U5NF12.book Page 14 Wednesday, May 8 , 2002 11:11 AM.
7-1 7 1- Riding Your ATV U5NF12.book Page 1 Wednesday, M ay 8, 2002 11:11 AM.
7-2 U5NF12.book Page 2 Wednesday, M ay 8, 2002 11:11 AM.
7-3 W ARNING _ Indicates a potential hazard that could result in serious injury or death. GETTING TO KNOW YOUR ATV This ATV is intended for recreational use by experienced operators only. Even though you are an experienced operator of all other all terrain vehicles or motorcycles, riding the ATV requires special skills acquired through practice.
7-4 RIDE WITH CARE AND GOOD JUDGEMENT Get training if you are inexperienced. Beginners should get training from a certified instructor. Become familiar with this ATV at slow speeds first, even if you are an experienced operator.
7-5 Not recommended for children under 16 years of age. WA R N I N G POTENTIAL HAZARD Failure to follow the age recommenda- tions for this ATV. WHAT CAN HAPPEN Use by children of ATVs that are not rec- ommended for their age can lead to se- vere injury or death of the child.
7-6 This ATV is designed to carry operator only – passengers prohibited. WA R N I N G POTENTIAL HAZARD Carrying a passenger on this ATV. WHAT CAN HAPPEN Greatly reduces your ability to balance and control this ATV. Could cause an accident, resulting in harm to you and/ or your passenger.
7-7 Apparel WA R N I N G POTENTIAL HAZARD Operating this ATV without wearing an approved motorcycle helmet, eye pro- tection and protective clothing. WHAT CAN HAPPEN Operating without an approved motor- cycle helmet in- creases your chances of a severe head injury or death in the event of an accident.
7-8 Do not operate after consuming alcohol or drugs. Operator ’ s performance capability is reduced by the influence of alcohol or drugs. WA R N I N G POTENTIAL HAZARD Operating this ATV after consuming al- cohol or drugs. WHAT CAN HAPPEN Could seriously affect your judgment.
7-9 Pre-operation checks Always perform the pre-operation checks list- ed on page 5-1 before riding for safety and proper care of the ATV. WA R N I N G POTENTIAL HAZARD Failure to inspect the ATV before oper- ating. Failure to properly maintain the ATV.
7-10 W ARNING _ Indicates a potential hazard that could result in serious injury or death. Do not operate at speeds too fast for your skills or the conditions. Speed limiter For riders inexperienced with this model, this model is equipped with a speed limiter in the throttle lever housing.
7-11 Loading and accessories Use extra caution when riding the ATV with additional loads, such as accessories or car- go. The ATV ’ s handling may be adversely af- fected.
7-12 During operation Always keep your feet on the footboards dur- ing operation. Otherwise your feet may con- tact the rear wheels. WA R N I N G POTENTIAL HAZARD Removing hands from handlebars or feet from footboards during operation.
7-13 Avoid wheelies and jumping. You may lose control of the ATV or overturn. WA R N I N G POTENTIAL HAZARD Attempting wheelies, jumps, and other stunts. WHAT CAN HAPPEN Increases the chance of an accident, in- cluding an overturn. HOW TO AVOID THE HAZARD Never attempt stunts, such as wheelies or jumps.
7-14 Modifications WA R N I N G POTENTIAL HAZARD Operating this ATV with improper modi- fications. WHAT CAN HAPPEN Improper installation of accessories or modification of this vehicle may cause changes in handling which in some situ- ations could lead to an accident.
7-15 Exhaust system The exhaust system on the ATV is very hot during and following operation. To prevent burns, avoid touching the exhaust system. Park the ATV in a place where pedestrians or children are not likely to touch it. WA R N I N G POTENTIAL HAZARD Hot exhaust system.
7-16 BE CAREFUL WHERE YOU RID E This ATV is designed for off-road use only. Riding on paved surfaces can cause loss of control. WA R N I N G POTENTIAL HAZARD Operating this ATV on paved surfaces. WHAT CAN HAPPEN ATVs are designed for off-road use only.
7-17 Do not ride on any public road, street, or high- way. Riding on public roads can result in collisions with other vehicles. WA R N I N G POTENTIAL HAZARD Operating this ATV on public streets, roads or highways. WHAT CAN HAPPEN You can collide with another vehicle.
7-18 Know the terrain where you ride. Ride cau- tiously in unfamiliar areas. Stay alert for holes, rocks, or roots in the terrain, and oth- er hidden hazards which may cause the ATV to upset. WA R N I N G POTENTIAL HAZARD Failure to use extra care when operating this ATV on unfamiliar terrain.
7-19 WA R N I N G POTENTIAL HAZARD Failure to use extra care when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN Could cause loss of traction or vehicle control, which could result in an acci- dent, including an overturn.
7-20 When riding in an area where you might not easily be seen, such as desert terrain, mount a caution flag on the ATV. DO NOT use the flag pole bracket as a trailer hitch. Do not ride in areas posted “ no trespassing ” . Do not ride on private property without getting permission.
7-21 Select a large, flat area off-road to become fa- miliar with your ATV. Make sure that this area is free of obstacles and other riders. You should practice control of the throttle, brakes, shifting procedures, and turning techniques in this area before trying more difficult terrain.
7-22 CAUTION: _ Do not shift gears without releasing the throttle. Damage to the engine or drive train may occur. _ When slowing down or stopping, release the throttle and apply the brakes smoothly and evenly. As you slow down, shift to a lower gear. Be sure that the engine has sufficiently slowed before engaging a lower gear.
7-23 TURNING YOUR ATV To achieve maximum traction while riding off- road, the two rear wheels are mounted solidly on one axle and turn together at the same speed. Therefore, unless the wheel on the in- side of the turn is allowed to slip or lose some traction, the ATV will resist turning.
7-24 This procedure should be practiced at slow speed many times in a large off-road area with no obstacles. If an incorrect technique is used, your ATV may continue to go straight. If the ATV doesn ’ t turn, come to a stop and then practice the procedure again.
7-25 CLIMBING UPHILL Use proper riding techniques to avoid vehicle overturns on hills. Be sure that you can ma- neuver your ATV well on flat ground before at- tempting any incline and then practice riding first on gentle slopes. Try more difficult climbs only after you have developed your skill.
7-26 WA R N I N G POTENTIAL HAZARD Climbing hills improperly. WHAT CAN HAPPEN Could cause loss of control or cause the ATV to overturn. HOW TO AVOID THE HAZARD Always follow proper procedures for climbing hills as described in this Own- er ’ s Manual.
7-27 If you are climbing a hill and you find that you have not properly judged your ability to make it to the top, you should turn the ATV around while you still have forward motion (provided you have the room to do so) and go down the hill. WA R N I N G POTENTIAL HAZARD Improperly crossing hills or turning on hills.
7-28 If your ATV has stalled or stopped and you believe you can continue up the hill, restart carefully to make sure you do not lift the front wheels which could cause you to lose control. If you are unable to continue up the hill, dis- mount the ATV on the uphill side.
7-29 Dismount on uphill si de or to a side if pointed straight uphill. Turn the ATV around and remount, following the pro- cedure described in the Owner ’ s Manu- al.
7-30 RIDING DOWNHILL When riding your ATV downhill, shift your weight as far to the rear and uphill side of the ATV as possible. Move back on the seat and sit with your arms straight. Choose a low gear which will allow the engine compression to do most of the braking for you.
7-31 U5NF12.book Page 31 Wednesday, May 8 , 2002 11:11 AM.
7-32 CROSSING A SLOPE Traversing a sloping surface on your ATV re- quires you to properly position your weight to maintain proper balance. Be sure that you have learned the basic riding skills on flat ground before attempting to cross a sloping surface.
7-33 Avoid hills with excessively slippery or loose surfaces. Shift your weight to the uphill side of the ATV. U5NF12.book Page 33 Wednesday, May 8 , 2002 11:11 AM.
7-34 CROSSING THROUGH SHALLOW WATER The ATV can be used to cross slow moving, shallow water of up to a maximum of 35 cm (14 inches) in depth. Before entering the wa- ter, choose your path carefully. Enter where there is no sharp drop off, and avoid rocks or other obstacles which may be slippery or up- set the ATV.
7-35 Test your brakes after leaving the water. Do not continue to ride your ATV without verifying that you have regained proper braking ability. CAUTION: _ After riding your ATV in water, be sure to drain the trapped water by removing the check hose at the bottom of the air filter case.
7-36 RIDING OVER ROUGH TERRAIN Riding over rough terrain should be done with caution. Look out for obstacles which could cause damage to the ATV or could lead to an upset or accident. Be sure to keep your feet firmly mounted on the footboards at all times.
7-37 U5NF12.book Page 37 Wednesday, May 8 , 2002 11:11 AM.
7-38 SLIDING AND SKIDDING Care should be used when riding on loose or slippery surfaces since the ATV may slide. If unexpected and uncorrected, sliding could lead to an accident. To reduce the tendency for the front wheels to slide in loose or slippery conditions, position- ing your weight over the front wheels will sometimes help.
7-39 With practice, over a period of time, skill at controlled sliding can be developed. The ter- rain should be chosen carefully before at- tempting such maneuvers, since both stability and control are reduced. Bear in mind that sliding maneuvers should always be avoided on extremely slippery surfaces such as ice, since all control may be lost.
7-40 WHAT TO DO IF ... This section is designed to be a reference guide only. Be sure to read each section on riding techniques completely. WHAT TO DO ... ● If your ATV doesn ’ t turn when you want it to: Bring the ATV to a stop and practice the turning maneuvers again.
7-41 ● If your ATV is traversing a sloping surface: Be sure to ride with your weight positioned towards the uphill side of the ATV to main- tain proper balance. If the ATV starts to tip, steer down the hill (if there are no obstacles in your way) to regain balance.
8-1 EBU00515 PERIODIC MAINTENANCE AND ADJUSTMENT Periodic inspection, adjustment and lubrica- tion will keep your machine in the sa fest and most efficient condition possible. Safety is an obligation of the machine owner. The most important points of machine inspection, ad- justment and lubrication are explained on the following pages.
8-2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 The service information included in this man- ual is intended to provide you, the owner, with the necessary information for completing your own preventive maintenance and minor re- pairs.
8-3 EBU00261 PERIODIC MAINTENANCE/LUBRICATION ITEM ROUTINE INITIAL EVERY 1 month 3 months 6 months 6 months 1 year Valves* • Chec k valve clear ance. • Adjust if nece ssary. Spark plug* • Check condit ion. • Adjust gap an d clean. • Replace if nece ssary.
8-4 * It is recommended that these items be serviced by a Yamaha dealer. ** Lithium-soap-based grease NO TE: • Recommended brake fluid: DOT4 • Brake fluid replacement: 1. When disassembling the master cylinders or calipers, re- place the brake fluid.
8-5 EBU01181 Engine oil Engine oil level measurement 1. Place the ATV on a level surface. 2. Warm up the engine for several minutes, and then stop it. 3. Remove the engine oil filler cap, and then wipe the dipstick off with a clean rag. In- sert the dipstick in the filler hole without screwing it in.
8-6 6. Insert the dipstick into the oil filler hole, and then tighten the engine oil filler cap. Engine oil replacement and oil filter ele- ment cleaning 1. Place the ATV on a level surface. 2. Warm up the engine for several minutes and stop it. 3. Place a container under the engine to collect the used oil.
8-7 5. Remove the oil filter cover by removing the bolts and then remove the oil filter el- ement. 6. Clean the oil strainer and oil filter element with solvent. 1. Oil filter cover 2. Bolt ( × 3) 3. Oil filter element 4. O-ring 7. Check the O-ring for damage and re- place it if necessary.
8-8 CAUTION: _ ● In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of “ CD ” or oils of a high- er quality than specified. In addition, do not use oils labeled “ ENERGY CONSERVING II ” or higher.
8-9 EBU01182 Spark plug inspection The spark plug is an important engine compo- nent and is easy to inspect. The condition of the spark plug can indicate the condition of the engine. For example, a very white center electrode porcelain color could indicate an intake air leak or carburetion problem for that cylinder.
8-10 When installing the spark plug, always clean the gasket surface and its mating surface. Wipe off any grime from the threads and tight- en it to the specified torque.
8-11 EBU01183 Air filter cleaning NO TE: _ There is a check hose at the bottom of the air filter case. If dust or water collects in this hose, empty the hose and clean the air filter element and air filter case. _ 1. Check hose 1. Remove the seat. (See page 4-12 for seat removal and installation proce- dures.
8-12 1. Element retaining plate 2. Frame 3. Air filter element 5. Wash the air filter element gently but thoroughly in solvent. 6. Squeeze the excess solvent out of the air filter element and let it dry. CAUTION: _ Do not twist the air filter element when squeezing it.
8-13 7. Inspect the air filter element. If damaged, replace it. 8. Apply Yamaha foam air filter o il or other quality foam air filter oil to the air filter el- ement. If foam air filter oil is not available, engine oil may be used. NO TE: _ The air filter element should be wet but not dripping.
8-14 EBU01111 Spark arrester cleaning Be sure the exhaust pipe and muffler are cool before cleaning the spark arrester. 1. Remove the bolt. 1. Bolt 2. Remove the tailpipe by pulling it out of the muffler. 3. Tap the tailpipe lightly, and then use a wire brush to remove any carbon depos- its from the spark arrester portion of the tailpipe.
8-15 EBU00296 Carburetor adjustment The carburetor is a vital part of the engine and requires very sophisticated adjustment. Most adjusting should be left to a Yamaha dealer who has the professional knowledge and ex- perience to do so. However, the idling speed may be performed by the owner as a part of the usual maintenance routine.
8-16 EBU01143 Idle speed adjustment NO TE: _ A diagnostic tachometer must be used for this procedure. _ 1. Start the engine and warm it up for a few minutes at approximately 1,000 to 2,000 r/min. Occasionally rev the engine to 4,000 to 5,000 r/min. The engine is warm when it quickly responds to the throttle.
8-17 EBU00307 Throttle lever adjustment N O TE: Adjust the engine idling speed before adjust- ing the throttle lever free play. 1. Loosen the locknut. 2. Turn the adjusting bolt until the throttle le- ver free play is 3 – 5 mm (0.12 – 0.20 in). 3.
8-18 1. Wear indicator groove EBU01185 Brake fluid level check Insufficient brake fluid may let air enter the brake system, possibly causing the brakes to become ineffective. Before riding, check that the brake fluid is above the minimum level mark and replenish if necessary.
8-19 1. Minimum level mark Observe these precautions: ● When checking the fluid level, make sure the top of the brake fluid reservoir is level by turning the handlebars. ● Use only the designated quality brake fluid. Otherwise, the rubber seals may deterio- rate, causing leakage and poor brake per- formance.
8-20 EBU01186 Brake fluid replacement Complete fluid replacement should be done only by trained Yamaha service personnel. Have a Yamaha dealer replace the following components during periodic maintenance or when they are damaged or leaking. ● Replace the oil seals every two years.
8-21 EBU01187 Front brake lever free play The front brake lever should have a free play of zero mm (zero in) at the lever end. If not, have a Yamaha dealer check the brake sys- tem. a. Brake lever free play WA R N I N G POTENTIAL HAZARD Operating with improperly serviced or adjusted brakes.
8-22 EBU01191 Brake pedal height adjustment The top of the brake pedal should be posi- tioned 10 mm (0.39 in) below the top of the footrest. If not, have a Yamaha dealer adjust it. a. Brake pedal position WA R N I N G POTENTIAL HAZARD Operating with improperly serviced or adjusted brakes.
8-23 EBU01193 Parking brake adjustment Parking brake adjustment may be required if the parking brake does not hold properly. The cable length A should be adjusted to 46 – 50 mm (1.81 – 1.97 in) A. Cable length 1. Fully loosen the locknut and the adjusting bolt at the clutch lever.
8-24 NO TE: _ If the cable cannot be adjusted to specifica- tion, consult a Yamaha dealer. _ 4. Tighten the locknut at the clutch lever. 5. Screw in the adjusting bolt at the rear brake caliper by hand until it feels tight, then screw it out 1/8 turn.
8-25 EBU00833 Adjusting the rear brake light switch The rear brake light switch, which is activated by the brake pedal and brake lever, is proper- ly adjusted when the brake light comes on just before braking takes effect. If necessary, ad- just the brake light switch as follows.
8-26 EBU00741 Clutch lever free play adjustment The clutch lever free play should be adjusted to 5 – 10 mm (0.20 – 0.39 in). 1. Loosen the locknut at the clutch lever. 2. Turn the adjusting bolt at the clutch lever in direction a to increase the free play or in direction b to decrease the free play.
8-27 6. Loosen the locknut at the crankcase side. 7. Turn the adjusting nut at the crankcase in direction a to increase the free play or in direction b to decrease the free play. 8. Tighten the locknut at the crankcase and the clutch lever. 1. Locknut 2.
8-28 a. Drive chain slack EBU0119 4 Drive chain slack adjustment 1. Loosen the rear wheel hub upper and lower nuts. 1. Upper wheel hub nut 2. Lower wheel hub nut 2. Loosen the locknuts on each side of the swingarm. To tighten the drive chain, turn the adjusting bolts in direction a .
8-29 NO TE: _ There are alignment marks on each side of the swingarm and on the hub. Use them to check for proper wheel axle alignment. _ 1. Locknut 2. Adjusting bolt 3. Alignment marks 3. After adjusting, tighten the locknuts and the wheel hub nuts to the specified torques.
8-30 EBU00805 Lubricating the drive chain The drive chain must be cleaned and lubricat- ed at the intervals specified in the periodic maintenance and lubrication chart, otherwise it will quickly wear out, especially when riding in dusty or wet areas. Service the drive chain as follows.
8-31 EBU00356 Cable inspection and lubrication Lubricate the inner cables and the cable ends. If the cables do not operate smoothly, ask a Yamaha dealer to replace them. EBU00737 Brake and shift pedal/brake and clutch lever lubrication Lubricate the pivoting parts of each lever and pedal.
8-32 EBU01018 Front upper and lower arm pivot lubrication Lubricate the upper and lower arm pivots. 1. Upper grease nipple ( × 2) 2. Lower grease nipple ( × 2) 1. Upper grease nipple ( × 2) 2. Lower grease nipple ( × 2) Recommended lubricant: Lithium-soap-based grease Right Left U5NF12.
8-33 EBU00987 Rear arm pivot lubrication Lubricate the rear arm pivots. 1. Grease nipple 1. Grease nipple Recommended lubricant: Lithium-soap-based grease U5NF12.
8-34 EBU01112 Wheel removal 1. Loosen the wheel nuts. 2. Elevate the ATV and place a suitable stand under the frame. 3. Remove the nuts from the wheel.
8-35 EBU00739 Wheel installation When installing the wheel, reverse the remov- al procedure. NO TE: _ The arrow mark on the tire must point to- ward the rotating direction of the wheel. _ 1. Arrow mark Tighten the wheel nuts to the specified torque. Wheel nut torque: Front: 45 Nm (4.
8-36 EBU00378 Battery Check the level of the battery fluid and see if the terminals are tight. Add distilled water if the fluid level is low. CAUTION: Do not leave or store the battery on its side. When inspecting the battery, be sure the breather hose is routed correctly.
8-37 WA R N I N G POTENTIAL HAZARD Failure to handle batteries or battery electrolyte carefully. WHAT CAN HAPPEN You could be poisoned. You could be severely burned by the sulfuric acid in battery electrolyte. Batteries produce explosive gases. HOW TO AVOID THE HAZARD Avoid contact with skin, eyes or cloth- ing.
8-38 EBU01195 Replenishing the battery fluid A poorly maintained battery will corrode and discharge quickly. The battery fluid should be checked at least once a month. 1. The level should be between the maxi- mum and minimum level marks. Use only distilled water if refilling is necessary.
8-39 EBU00394 Fuse replacement 1. The fuse case is located below the fend- er. 2. If the fuse is blown, turn off the main switch and install a new fuse of the spec- ified amperage. Then turn on the switch- es, if the fuse immediately blows again, consult a Yamaha dealer.
8-40 EBU01242 Replacing a headlight bulb If a headlight bulb burns out, replace the bulb as follows. 1. Remove the headlight assembly by re- moving the bolts.
8-41 3. Remove the headlight unit from the headlight assembly by removing the bolt. 1. Headlight unit 2. Headlight assembly 3. Bolt 4. Remove the headlight unit cover by re- moving the screw. 1. Headlight unit cover 2. Screw 5. Remove the headlight bulb holder cover.
8-42 6. Turn the headlight bulb holder counter- clockwise, and then remove the defective bulb. 1. Headlight bulb holder WA R N I N G POTENTIAL HAZARD A headlight bulb is hot when it is on and immediately after it is turned off. WHAT CAN HAPPEN You can be burned, or a fire could start if the bulb touches something flamma- ble.
8-43 7. Put a new headlight bulb into position and secure it in place with the bulb hold- er. CAUTION: _ Do not touch the glass part of the head- light bulb to keep it free from o il, otherwise the transparency of the glass, the luminos- ity of the bulb, and the bulb life will be ad- versely affected.
8-44 12. Install the headlight unit assembly by in- stalling the bolts. 13. Adjust the headlight beam if necessary. EBU0108 9 Headlight beam adjustment CAUTION: _ It is advisable to have a Yamaha dealer make this adjustment. _ To raise the beam, turn the adjusting screw in direction a .
8-45 EBU00861 Tail/brake light bulb replacement 1. Tail/brake light bulb holder 1. Remove the bulb holder (together with the bulb) by turning it counterclockwise. 2. Remove the defective bulb from the bulb holder by pushing it inward and turning it counterclockwise.
8-46 EBU00412 Troubleshooting Although Yamaha machines receive a rigid in- spection before shipment from the factory, trouble may occur during operation. Any prob- lem in the fuel, compression, or ignition sys- tems can cause poor starting and loss of power.
8-47 EBU00440 Troubleshooting chart 1. Fuel Check if there is fuel in the fuel tank. There is fuel. Turn the fuel cock to “OFF”. No fuel. Fuel cock clogged. Clean fuel cock. Some fuel. Turn the fuel cock to “RES”. Restart engine. No fuel. Supply fuel.
9-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 EBU00417 CLEANING AND STORAGE A. CLEANING Frequent, thorough cleaning of your machine will not only enhance its appearance but will improve its general performance and extend the useful life of many components. 1. Before cleaning the machine: a.
9-2 7. Clean the seat with a vinyl upholstery cleaner to keep the cover pliable and glossy. 8. Automotive type wax may be applied to all painted and chrome plated surfaces. Avoid combination cleaner-waxes. Many contain abrasives which may mar the paint or protective finish.
9-3 EBU00525 B. STORAGE Long term storage (60 days or more) of your machine will require some preventive proce- dures to guard against deterioration. After thoroughly cleaning the machine, prepare for storage as follows: 1.
9-4 8. Remove the battery and charge it. Store it in a dry place and recharge it once a month. Do not store the battery in an ex- cessively warm or cold place (less than 0 ° C (30 ° F) or more than 30 ° C (90 ° F)). N O TE: Make any necessary repairs before storing the machine.
10-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 EBU00428 1- SPECIFICATIONS MODEL YFM350X Dimension: Overall length Overall width Overall height Seat height Wheel base Ground clearance Minimum turning radiu s 1,840 mm ( 72.4 in) 1,080 mm ( 42.5 in) 1,080 mm ( 42.
10-2 Engine oil: Type Recommended engine oil classification : API Service SE, SF, SG type or higher Quantity: Periodic oil chang e (engine oil) Periodic oil chang e (engine oil with oil fil ter replacement) Total amount 2.4 L (2.1 Imp qt, 2.5 US qt) 2.
10-3 Air filter: Wet element Fuel: Type Tank capacity Reserve amount UNLEADED GASOLINE ONLY 9.0 L (2.0 Imp gal, 2.4 US gal) 1.9 L (0.4 Imp gal, 0.5 US gal) Carburetor: Type/manufacturer BTM36SH / MIKUNI Spark plug: Type/manufacturer Gap DR8EA / NGK 0.
10-4 Gear ratio: 1st 2nd 3rd 4th 5th 6th Reverse 36/16 × 20/27 × 29/18 (2.6 85) 33/20 × 20/27 × 29/18 (1.9 69) 29/23 × 20/27 × 29/18 (1.5 04) 27/26 × 20/27 × 29/18 (1.2 39) 25/28 × 20/27 × 29/18 (1.0 65) 23/29 × 20/27 × 29/18 (0.9 46) 33/16 × 33/10 (6.
10-5 Wheel travel: Front Rear 200 mm (7.87 in) 200 mm (7.87 in) Electrical: Ignition system Generator system Battery type/voltage capacity D.C. C.D.I. A.
11-1 EBU00430 1 - NOISE REGULATION TAMPERING WITH NOISE CONTROL SYS TEM PROHIBITED: Federal law prohibits the following acts or the causing thereof: (1) The removal or rendering inop- erative by any p.
12-1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 EBU00431 1 - MAINTENANCE RECORD Copies of work orders and/or receipts for parts you purchase and insta ll will be required to docu- ment maintenance done in accordance with the warranty. The chart below is printed only as a re- minder to you that the maintenance work is required.
13-1 EBU00432 YAMAHA MOTOR CORPORATION, U.S.A. ATV LIMITED WARRANTY U5NF12.book Page 1 Wednesday, M ay 8, 2002 11:11 AM.
13-2 1 2 3 4 5 6 7 8 9 10 9 9 13 14 U5NF12.book Page 2 Wednesday, M ay 8, 2002 11:11 AM.
14-1 EBU00435 YAMAHA EXTENDED SERVIC E (Y.E.S.) U5NF12.book Page 1 Wednesday, M ay 8, 2002 11:11 AM.
14-2 1 2 3 4 5 6 7 8 9 10 9 9 9 14 U5NF12.book Page 2 Wednesday, M ay 8, 2002 11:11 AM.
EBU00436 W ARNING Indicates a potential hazard that could result in serious injury or death. U5NF12.book Page 3 Wednesday, M ay 8, 2002 11:11 AM.
EBU00437 U5NF12.book Page 5 Wednesday, M ay 8, 2002 11:11 AM.
5NF-28199-12 LIT-11626-16-08 READ THIS MANUAL CAREFULLY! It contains important safety information. This ATV should not be ridden by anyone under 16 years of age. WARNING YFM350XR(C) OWNER’S MANUAL PRINTED IN JAPAN 2002.04-3.0 × 1 CR (E) PRINTED ON RECYCLED PAPER Y AMAHA MO T OR CO .
Card.fm Page 1 Wednesday, June 13, 200 1 9:35 AM.
Card.fm Page 2 Wednesday, June 13, 200 1 9:35 AM.
Een belangrijk punt na aankoop van elk apparaat Yamaha YFM350XR(C) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Yamaha YFM350XR(C) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Yamaha YFM350XR(C) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Yamaha YFM350XR(C) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Yamaha YFM350XR(C) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Yamaha YFM350XR(C) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Yamaha YFM350XR(C) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Yamaha YFM350XR(C) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
