Gebruiksaanwijzing /service van het product BIPAC-741 GE V2.0 van de fabrikant Billion Electric Company
Ga naar pagina of 48
BIPAC-741 GE V2.0 ADSL Firew all Router with 4-port 10/100M switch User’s Manual.
.
i Table of Contents CHAPTER 1 ......................................................................... 1 I NTRODUCTION ...................................................................................................................................
Billion BIPAC-741 GE V2.0 ADSL F irewall Router ii Problems with the WAN Interface ............................................................................................. 42 Problems with the LAN Interface .......................................
1 Chapter 1 Introduction 1.1 An Overview of BIPAC-741 GE V2.0 The BIPAC-741 GE V2.0 router provid es a high-speed A DSL port, a 4- port 10/100M Base-T Ethernet switch for hi gh-speed Internet browsing. It can support downstream transmission rat es of up to 8Mbps and upstream transmission rat es of up to 1024Kbps.
Billion BIPAC-741 GE V2.0 ADSL F irewall Router 2 dedicated l ocal web s erver, ev en though th e server no w has a di fferen t IP address. In this example, the product is on the Internet and vulnerable to attacks, but the server is protected. Virtual Server can also be used to re-task services to multiple servers.
Chapter 1 Introduction 3 Fire wall: Supports SOHO firewall with NAT technology. Automatically detects and blocks the Denial of Service ( DoS) attack. The UR L-blocking, packet filterin g and SP I are also supported. The hacker’ s attack will be recor ded associated with timestamp in the security logging area.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 4 Web based G UI: supports web based GU I for configuration and m anagement. It is user-friendl y with an on-line help, providing necessar y information and assist user timing . It also supports remote management capability for remote users to configure and manage this product.
5 Chapter 2 Using BIPAC-741 GE V2.0 2.1 Cautions for using the BIPAC-741 GE V2.0 Do not place the BIPAC-741 GE V2.0 under high humidity and high temperature. Do not use the same power source for BIPAC-741 GE V2.0 with other equipment. Do not open or repair the case yourself.
Billion BIPAC-741 GE V2.0 ADSL F irewall Router 6 6 LAN port 4 Lit when connected to Ethernet device Green for 100Mbps; Orange for 10Mbps Blinking when data transmit/received 7 MAIL Lit when there is email in the email account 9 PPP L it when there is a PPPoA/PPPoE connection 13 ADSL Lit when successfully connected t o an ADSL DSLAM 2.
Chapter 2 Using BIPAC-741 GE V2.0 7 2.4 Cabling The most common problem is bad cabling or ADSL line. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify that the L AN L ink and ADSL line L EDs are lit.
8 Chapter 3 Configuration The BIPAC-741 GE V2.0 can be configured with y our Web browser. The web browser is included as a standard application in the followi ng operation s ystems, UNIX, Linux, Mac OS, Windows 98/NT/2000/Me, and etc. The product provides a ver y easy and user-friendly interface for configuration.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 9 3.3 Configuring PC in Windows 3.3.1 For Wi ndow s 98/ME 1. Go to Start / Se ttings / Co ntrol P anel . In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Network Interface Card (NI C) in y our PC.
Chapter 3 Configuration 10 5. Then select the DNS Conf iguration tab. 6. Select t he Disable DNS radio button and click “OK” to finish the configuration.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 11 3.3.2 For Wi ndow s NT4.0 1. Go to Start / Se ttings / Co ntrol P anel . In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP P rotocol and click Properties . 3.
Chapter 3 Configuration 12 3.3.3 For Wi ndow s 2000 1. Go to Start / Se ttings / Co ntrol P anel . In the Control Panel, double-click on Network and Dial-up Conne ctions . 2. Double-click LAN Area Connection . 3. In t h e LAN Area Conne ction Stat us window, click Properties .
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 13 4. Select Internet Protocol (TCP /IP) and click P rop erties . 5. Select the Obta in an I P address automatically and the Obtain DNS serve r address automatically radio buttons. 6. Click OK to finish the configuration.
Chapter 3 Configuration 14 3.3.4 For Wi ndow s XP 1. Go to Start / Control Panel (in Classic View). I n the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection 3. In t h e LAN Area Conne ction Stat us window, click Properties .
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 15 4. Select I nternet Protocol (TCP/I P) and click Properties. 5. Select the Obta in an I P address automatically and the Obtain DNS serve r address automatica lly radio buttons 6. Click OK to finish the configuration.
Chapter 3 Configuration 16 3.4 Factory Default Settings Before configurating this BIPAC-741 GE V2.0 , y ou need to know the following default settings. 1. Web Configurator Username: a dmin Password : admin 2. Device IP Network settings in LAN site I P Address : 192.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 17 If you ever forget the password t o log in, you may press the RESET button t o restore the factory default settings.. 3.4.2 LA N and WAN Port A ddresses The parameters of LAN and WAN ports are pre-set in the factory.
Chapter 3 Configuration 18 IPoA VPI /VCI , I P address, Subnet mask, Gateway address, and Domain Name Sy stem (DNS) I P address (it is fixed IP address). 3.6 Configuring with the Web Brow ser Open the web browser, enter the local port IP address of this BIPAC-741 GE V2.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 19 At the configuration homepa ge, the left navigation pane where bookma rks are provided links y ou directly to the desired setup pag e, including: .
Chapter 3 Configuration 20 When y ou click the UPnP Portm ap , it display s the Virtual Servers (or Port Mappings) that created by UPnP protocol implemented in W indows.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 21 It supports two Ethernet IP addresses in the LAN. With this function, t he ADS L router can support two different LAN subnets to access the Internet at the same time. Usually, there is onl y one subnet in LAN, there is no ne ed to confi gure a Secondar y IP address.
Chapter 3 Configuration 22 Port # Connec tion Type : Five options to choose from: auto, 10M half-duplex, 10M full-duplex, 100M half-duplex or 100M full-duplex . Sometimes, there are Ethernet compatibility problems with legacy Ethernet devices. You c an configure dif ferent types to solve the compatibility issues.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 23 If y ou check DHCP Relay Agent and click Next , then you will have to enter the IP addre ss of the DHCP server which will assign an IP address back to the DHCP client in the LAN. Click Apply to enable this function.
Chapter 3 Configuration 24 Username: Enter the us ername provided b y your ISP. You can input up to 128 alphanumeric charac ters (ca se sensitive). Password: Enter the password provided b y your I SP. You can input up to 128 alphanumeric charac ters (ca se sensitive).
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 25 A Domain Name System (DNS) contains a mappi ng table for domain name and I P address es. In the Internet, every host has a unique and friendl y n ame such as www.
Chapter 3 Configuration 26 The router doe s not have a real time clock on board; inste ad, it uses the simple ne twork time protocol (SNTP) to g et the cu rrent time from the SNTP ser ver from the outside network. Ple ase choose your local time zone, click Enable and cl ick the Apply button.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 27 3.6.3.4 Firew all There are five items under the Firewall section: General Setting s, Packet Filter, I ntrusion Detection, MAC Address Filter and URL Filter. When y ou click Ge neral Se ttings , y ou get the following figure.
Chapter 3 Configuration 28 You may configure to filter inbound (incoming) and outbound (outg oing) packets based on PORT or I P address. If it is based on PORT, click Port Filters for more options. You may filter the packets based on PORT and packet t ype (TCP or UDP or any).
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 29 Enable : Set True to enable this I ntrusion detection. Use BlackList : Set True to use router’s default backlist to protect router. Use Victim Protection : Set True to enable Victim protection. Victim Protection Duration : Input numbers.
Chapter 3 Configuration 30 When y ou click the URL Filter , y ou get the following fig ure. The URL filtering function enables you to block unwanted websites from accessing inappropriate materia l from the en tire ente rprise. ~ ~ ~ ~ Enable / Disable: Check Enable / Disable radio button to active / disable, r espectively the URL filter function.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 31 The ADSL Router allo ws the admin istrator to bl ock some WEB URLs containin g certain keywords in this page. For example, if the ke yword “xxx ” is listed, the URL http://www.new.site.com/xxx.html would be blocked, even if it is not included in the domain filtering list.
Chapter 3 Configuration 32 To add a domain name, enter its host n ame, such as www.bad-site.com into the text field under Domain and select eith er Truste d Domain or Fo rbidden Dom ain, then clic k Apply . The specified domain will be shown in the Domain List .
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 33 Type: Check Dial Out to be a client, check Dial In to be a serv er. When this network router acts as a client, please input the remote Se rver IP Address (or Hostn ame) to establish a connection.
Chapter 3 Configuration 34 Netmask: Enter the subnet mask of peer network based on above Peer Network I P setting. Username: If you are a Dial-Out user ( client), enter the username provid ed by your Host. If you are a Dial-I n user (server), enter y our own username.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 35 Connec tion Nam e: Give a name for this connection. Local Network: Set the IP address, subnet or address range of the local network. ~ ~ ~ ~ Single Addre ss: The I P address of the local host. ~ ~ ~ ~ Subnet : The subnet of the local network.
Chapter 3 Configuration 36 Perfect Forw ard Secrecy: Enable this to change encr yption key s durin g the second phase of VPN negotiation. This function will provide better securit y, but extends the VPN negotiation time. Pre-shared Key : This is a string from 4 characters to 128 characters.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 37 Being a na tural Inter net firewall, this networ k router protects your ne twork from being accessed by outside users. When it needs to allow outside users to access internal se rvers, e.g. W eb server, FTP server, E-mail serv er or News s erver, this modem can act as a virtual server.
Chapter 3 Configuration 38 Destination: Enter the destination subnet I P. Netmask: Subnet mask of destination I P addresses based on above destination subnet I P. Gateway: Enter the gate way IP addre ss which the packe t is forwarde d to. Interface: Enter th e interface which the packet i s forwarded to.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 39 The Dynamic DNS service allows you to alias a dynamic I P address to a static hostname. This dynamic IP address is the W AN IP address. For e xample, to use the service, you must first apply for an account from this free W eb server http://www.
Chapter 3 Configuration 40 Automaticall y dial-ou t for checkin g emails: When the function is enabl ed, your ADSL router will connect to your ISP automatically to check emails if your Internet connection dropped. Please be c areful whe n using this fe ature if y our ADSL service is c harg ed by time.
Billion BIPAC-741 GE V2.0 ADSL F i rewall Router 41 UPnP Port: I ts default setting is 2800. I t is highly recommended for users to use this port value. You may wish to modify this port value, only if this value conflicts with other ports already being used.
42 Chapter 4 Troubleshooting If the ADSL Router is not functioning properl y, you can refer first to this chapter for sim ple troubleshooting before contacting your service provider. This could save you time and effort but if the sy mptoms persist, then consult your service provider.
43 APPENDIX A Specification Protocols I P, NAT, PPTP, ARP, I CMP, DHCP, PPPoE, PPPoA, IPoA, PPTP client, RI P1/2 LAN Port RJ -45, 4 ports 10/100Base-T LAN switch WAN Port RJ-11, 1 ADSL port LED Indica.
44 APPENDIX B Product Support Most problems can be solved by using the Troubleshooting in Chapter 4. I f you cannot resolve the problem with the Troubleshooting Chapter, please conta ct the dealer where you purchased this product. You can also call the Billion Sup port line at 1300 139159 or email support at support@billion.
Een belangrijk punt na aankoop van elk apparaat Billion Electric Company BIPAC-741 GE V2.0 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Billion Electric Company BIPAC-741 GE V2.0 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Billion Electric Company BIPAC-741 GE V2.0 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Billion Electric Company BIPAC-741 GE V2.0 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Billion Electric Company BIPAC-741 GE V2.0 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Billion Electric Company BIPAC-741 GE V2.0 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Billion Electric Company BIPAC-741 GE V2.0 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Billion Electric Company BIPAC-741 GE V2.0 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
