Gebruiksaanwijzing /service van het product R170XiTM van de fabrikant Zebra Technologies
Ga naar pagina of 184
Zebra ® R110 Xi ™/R170 Xi ™ High-Performance Printers User Guide.
© 2004 ZIH Corp. The copyrights in this manual and the la bel print engine described therein are owned by Zebra T echnologies Corporation. Unauthorized reproduction of this manual or the software in the label print engine may result in imprisonment of up to one year and fines of up to $10,000 (17 U.
I have determined that the Zebra printers identified as the manufactured by: Have been shown to comply with the applicable technical standards of the FCC If no unauthorized changed is made in the equipment, and if the equipment is properly maintained and operated.
Notes • ___________ _________ ___________ ____________ _________ ___________ ____ ___________ _________ ____________ ___________ _________ ___________ ___________ ___________ _________ ____________ .
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide v Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Contact s . . . . . . . . . . . . . . . . . . . . . . .
vi R1 10 Xi /R170 Xi User Guid e 12/23/04 23063L-003 Rev . 2 Content s Ribbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 When to Use Ribbon. . . . . . . . . . . . .
Content s 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide vii Creating Basic RFID Label Format s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 RFID Label Format 1—W r ite a 96-bit T ag in Hexadecimal .
viii R1 10 Xi /R170 Xi User Guide 12/23/04 23 063L-003 Rev . 2 Content s 9 • T roubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 T roubleshooting . . . . . . . . . . . . . . . . . . . . . .
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide ix Preface This section provides yo u with contact informatio n, document structure and orga nization, and additional re ference documents. Content s Contacts . . . . . . . . . . . . . . . . . .
xR 1 1 0 Xi /R170 Xi User Guide 2306 3L-003 Rev . 2 12/23/04 Preface Contact s Cont act s Y ou can contact Zebra T echnologies at an y of the followi ng: Visit us at: h ttp://www .zebra.com Our Mailing Addresses: Zebra T echnologies Corporatio n 333 Corporate W oods Park way V ernon Hills, Illinois 60061.
Preface Document Conventions 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide xi Document Conventions The following conv entions are used throughout this docu ment to convey cer tain information : Alternate Color (online only) C r oss-referenc es contain hot links to othe r sections in t his guide.
xii R1 10 Xi /R170 Xi U ser Guide 23063L-003 Rev . 2 12/23/04 Preface Related Documents Illustration Callout s Callouts are used when an illustrati on contains informatio n that needs to be labeled a nd described. A table that contains the labels and descriptions follows th e graphic.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 1 Introduction This chapter provides a high -level over view of the printer and its components. Content s Exterior View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2R 1 1 0 Xi /R170 Xi User Guide 23063L-003 Rev . 2 12/23/04 Introduction Exterior View Exterior V iew The following il lustrations show the exterior of th e printer .
Introduction Front Panel 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 3 Front Panel Figure 4 shows the buttons and lights on the front panel . For a description of the front panel buttons, see T able 1 on page 4 , and fo r a description of the front panel lights, see Ta b l e 2 on page 5 .
4R 1 1 0 Xi /R170 Xi User Guide 23063L-003 Rev . 2 12/23/04 Introduction Front Panel Front Panel Buttons This table describes the function of the buttons sho wn in Figure 4 . T able 1 • Front Panel Buttons Button Det ails LEFT OV AL Changes para meter values.
Introduction Front Panel 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 5 Front Panel Light s This table det ails the lights shown in Figure 4 on page 3 . T able 2 • Front Panel Lights Light Det a ils POWER Indicates printer power status. • Off — printer is of f.
6R 1 1 0 Xi /R170 Xi User Guide 23063L-003 Rev . 2 12/23/04 Introduction Printer Component s Printer Component s Figure 5 shows a side view of the pr inter ’ s interna l compone nts. Figure 5 • Internal Component s Note • Depending on the printer options that you selected, your printer could l ook slightly dif ferent.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 7 2 Printer Setup This chapter provides the tasks th at you must complete and the i ssues that you must consider before you load a n d configure yo ur printer . Content s Before Y ou Begin . . .
8R 1 1 0 Xi /R170 Xi User Guide 23063L-003 Rev . 2 12/23/04 Printer Setup Before Y ou Begin Before Y ou Begin Review this chec klist, and resolve a ny issues before you b egin setting up your printer . When you are ready , continue with Prin ter Operation on page 19 .
Printer Setup Unpack and Inspect the Printe r 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 9 Unp ack and Inspect the Printer When you unpac k the printer , save all packing materi als. When the printer i s out of the box, raise the printer’ s media door , and remove the power co rd.
10 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Setup Select a Site for the Printer Select a Site for the Printer Consider the followin g when selec ting an appr opriate loc ation for you r printer .
Printer Setup Connect the Printer to a Power Source 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 1 Connect the Printer to a Power Source T o connect the printer to a powe r source, complete the se steps: 1. T urn the printer powe r switch (located on the rear of the printer) to the Of f ( O ) position.
12 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Setup Select a Communication Interface Select a Communication Interface The way that you connect your printer to a data source depe nds on the communication op tions installed in the printer .
Printer Setup Select a Communication Interface 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 13 Dat a Cable Requirement s Data cables must be ful ly shielded and fitte d with metal or metal lized connector shells. Shielded cables and conne ctors are required to prevent radia tion and reception of electrical noise.
14 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Setup T ypes of Media T ypes of Media The printer can u se various types of med ia ( Ta b l e 4 ). W e strongly re commend th e use of Zebra-brand supplies for contin uous high-quality printing.
Printer Setup T ypes of Media 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 15 Fanfold Media The media is fold ed in a zigzag pattern. RFID “Smart” Media Each label has a radio frequency identification (RFID) chip and ante nna i nlay embedded between the lab el and th e liner .
16 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Setup Ribbon Ribbon Ribbon is a t hin film that is co ated on one side with wax, resin, or wax resin, which is transferred to the media duri ng the therm al transfer pr ocess. The media d etermines wh ether you need to use ribbon and how wide the ribb on must be.
Printer Setup Ribbon 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 17 Adhesive T e st If you have lab els available, perform th e adhesive test to determine which sid e of a ribbon is coated. This method works well for ribbon that is already install ed.
18 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Setup Ribbon Notes • ___________ ____________________ _____________________ ___________ ____ ___________ _____________________ __.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 19 3 Printer Operation If you have complet ed the tasks and reso lved the issues in the checklist in Befor e Y ou Begin on page 8 , follow the instructi on in this chapter to load and calibrate your printe r and to print configuration lab els.
20 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Loading the Media Loading the Media This section give s you a series of instruction s to load labels for a standard printer in T ear-O ff mode ( Figure 1 1 ). Y ou can use roll or fanfold me dia in this printer .
Printer Operation Loading the Med ia 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 21 Load Roll Media Roll media feeds thro ugh the printer from the media hanger or med ia supply spindle. Figure 12 identifies the components of the printer with which you n eed to be fa miliar to load roll media in T ear-Of f mode.
22 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Loading the Media T o load roll media, complete these steps: 1. Open the p rinthead. 2. See Figur e 13 . Slide the media guide away from the printer frame. Y ou may need to loosen the med ia guide thumb screw .
Printer Operation Loading the Med ia 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 23 Figure 14 • Threading Media 7. Pull the med ia through un der the printhe ad. 8. Adjust the media gu ide so that it just touches but d oes not restrict th e media.
24 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Loading the Media Load Fanfold Media Fanfold media feeds thro ugh either the bott om or rear access slot from outside the printer . The media hanger an d media supp ly spindle ar e not used with fanfold media.
Printer Operation Loading the Med ia 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 25 • From the r ear slot in the printer body . Figure 16 shows the pri nter with fanfold label s loaded thro ugh the rear slot. Figure 16 • Fanfold Media—Rear Loading 4.
26 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Loading Ribbon Loading Ribbon Before you load ribbon, make sure that the medi a that you are using needs rib bon.
Printer Operation Loading Ribbo n 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 27 Create a Ribbon Leader A ribbon leader makes it easier to load and unload ribb on. Make a leader for your ribbon roll if it does not already have one. T o make a ribbon leader , complete these steps: 1.
28 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Loading Ribbon 4. Does your print er contain a ribbon dancer assembly? If... Then... No See Figur e 20 . Thread the ribb on under the ribbon guide roller . Figure 20 • Loading Ribbon, No Dancer Assembly Ye s a.
Printer Operation Loading Ribbo n 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 29 5. See Figur e 22 . Thread the ribbon under the prin thead and past the platen roller . Figure 22 • Threading Ribbon Under the Printhead 6. Pull the ribbon leader over the printhead an d above the top roller .
30 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Loading Ribbon 7. See Figur e 23 . Bring the ribbon under the ribb on take-up spindle, and wrap it a round the spindle counter -clockwise. Figure 23 • Winding Ribbon ar ound the Ribbon T ake-up Spindle 8.
Printer Operation Loading Ribbo n 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 31 Remove Used Ribbon When the ribb on has run out or must be change d, remove the us ed ribbon from the take-up spindle ( Figure 24 ). Figure 24 • Ribbon T ake-Up Spindle T o remove used ribbon, complete these steps: 1.
32 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Print a Printer Co nfiguration Label Print a Printer Configuration Label When you hav e loaded the medi a and ribbon (i f necessary), print a configuration label as a record of your printe r’ s current settings.
Printer Operation Print a Printer Co nfiguration Label 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 33 Figure 25 • Printer Configuration Label.
34 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Print a Network Configuration Label Print a Network Configuration Label If you are using a print server , you can pri nt a ne twork configuration label after the printe r is connected to the network.
Printer Operation Calibrate the Printer 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 35 Calibrate the Printer Calibrate the printe r when it is first put into serv ice. Calibration al lows the printer to establish the proper settin gs for the speci fic media and ri bbon used in your application.
36 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Calibrate the Printer Sensor Profile Calibration The printer auto -calibrates and prin ts a media sensor profil e. Select the SENSOR PROFILE option on the front panel. See Sensor Pr ofile on page 49 for instructions.
Printer Operation Adjust Media Sensors 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 37 Adjust Media Sensors The transmissive sensor consists of two sections: a light source (the lower media sens or) and a light sensor (t he upper media sensor).
38 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Adjust Media Sensors T o adjust the upper media sensor for the out side half of the media: 1. Remove the ribbon (if ribbon is used). 2. Locate the upper me dia sensor . The upper me dia sensor eye is directly be low the adjustment screw head.
Printer Operation Adjust Printhead Pressur e and T oggle Position 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 39 Adjust Printhead Pressure and T oggle Position Printhead pressure is one factor that affects prin t quality . If the toggle pressure is too light or uneven, the labels and ribbon may slip.
40 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Printer Operation Adjust Printhead Pressure an d T oggle Position Printhead Pressure Adjustment If positioning the toggles properly does not solv e the problem, adju st printhead pressu re. Maximize printh ead life by using the lowest pressure th at produces the desired prin t quality .
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 41 4 Front Panel Controls This chapter describes the functi on of the front panel. Content s Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Overview Overview After you have installe d media and ribbon and prin ted a configuration label, yo u can change the printer’s settings using the front panel controls.
Front Panel Controls Password-Protected Parame ters 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 43 Password-Protected Parameters Certain paramet ers are password-prot ected by factory defau l t, includin g the communicat ion parameters.
44 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD Front Panel LCD Use the LCD display on the front panel to adjust print er settings. The tabl es in this section show parameters in the order in whic h they are displ ayed when you press NEXT/SA VE after entering setup mode.
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 45 TEAR OFF Adjusting the T e ar -Off Position This parameter esta blishes the position of th e labels over the t ear-off/ peel-off b ar after printin g. Each press of an ov al adjusts the tear -off position by four dot rows.
46 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD PRINT METHOD Selecting Print Method The print method paramete r tells the printe r the method of printin g that you wish to use: direct thermal (no ribbon) or thermal transfer (using thermal transfer media and ribbon).
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 47 EARLY WARNING Setting Early W arning When this parameter is enabled, the printer p rovides warnings when labels or ribbons are runn ing low or w hen th e printhead needs to be cleaned.
48 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD LIST IMAGES List Images • Press the right oval to print a l abel that lists the available i mages stored in the printer ’ s RAM, Flash memo ry , optional EPROM, or optional memory card.
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 49 INIT FLASH MEM Initialize Flash Memory Caution • Perform this operation only when it is necessary to erase all previously stored information from Flash memor y .
50 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD MEDIA AND RIBBON CALIBRATE Calibrat e Media and Ri bbon Sensors Use this procedu re to adjust sensitiv ity of media and ribbon sensors. Import ant • This procedure must be follow ed exactly as presen ted.
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 51 BAUD Setting Baud The baud setting of th e printer must match the baud setting of the h ost computer for accurate communications to take place. Select the value tha t matches the one being used by th e host compute r .
52 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD NETWORK ID Setting Network ID Network ID is used to assign a unique number to a printer used in an RS-422/RS- 485 network. This gives the h ost computer th e means to address a specific printer .
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 53 FORMAT PREFIX Format Pr efix Character The format prefix is a t w o-digit hex v alu e used as a paramet er place marker in ZPL/ZPL II format instructions .
54 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD MEDIA POWER UP Media Power Up This parameter sets t h e action of th e labels when the p rinter is turned on . • Press the right or left oval to display th e choices.
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 55 BACKFEED Backfeed Sequence This parameter establi shes when and how mu ch labe l backfeed oc curs af ter a label is removed or cut in Peel-Off, Cutter, and Applicator modes.
56 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD HEAD TEST COUNT Setting the Head T est Count The printer pe riodically performs a test of the printhead functionali ty , called a printhead test or head test .
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 57 APPLICATOR PORT Setting the Applicator Port Determines the act ion of the app licator port. Note • Set this valu e as suggeste d by the applicator manufacturer .
58 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD RESYNCH MODE Resynch Mode This parameter determines h ow the printer reacts if t he label synchroniza tion is lost and the label top is not where expected.
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 59 IDLE DISPLAY Select Idle Display This parameter sel ects the LCD optio ns for the real-tim e clock. Note • If the default value is not selected, pressing either oval briefly displa ys the firmware version of the printer .
60 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD ZebraNet ® Wired and Wi reless Prin t Server LCD Displays The menu opti ons shown in Ta b l e 8 display only if you have t he ZebraNet PrintServer II, or 10/100 PrintServer , or W ireless Print Server installed .
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 61 DEFAULT GATEWAY 2 Default Gateway This parameter allows you to select the IP address t hat the network traf fic is routed through if th e destination address is not part of the local net work.
62 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD RFID LCD Displays The menu options sho wn in Ta b l e 9 display only if you have a Radio Frequen cy Identification (RFID) reader installed.
Front Panel Controls Front Pane l LCD 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 63 RFID TAG CALIB RESTORE RUN Calibrate RFID T ag This option allows you to have the printer determine th.
64 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Front Panel Controls Front Panel LCD RFID TAG DATA Read and Display R FID T ag Da ta When this option is selected, the re ader attempts to read a tag over th e reader, even if the printhead is open.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 65 5 RFID Guidelines This chapter describes how Radio Frequency Identification (RFID) w orks and provides t he commands used to create RFID labels. Content s Overview . . . . . . . . . . . . . .
66 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines Overview Overview The R1 10 Xi /R170 Xi RFID label printers/encoders serv e as dynamic tools for both prin ting and encoding RFID labels, ticke ts, and tags. The printe r encodes information on ultra-th in UHF RFID transponders that are embedded in “smart ” labels.
RFID Guidel ines Overview 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 67 Electronic Product Code (EPC) EPC is a product n umbering standa rd that can be used to identi fy a variet y of items by using RFID technology .
68 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines Getting S tarted with RFID Getting S t arted with RFID How you set up you r printer for RFID a pplications is determined in pa rt by the transp onder that you sele ct.
RFID Guidel ines Creating Basic RFID Labe l Formats 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 69 Creating Basic RFID Label Format s After you have selected a tran sponder type and set your pri nter appropriately , use the ZPL samples in this sectio n as a base for programming your own RFID label formats.
70 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines Creating Basic RFID Label Forma ts RFID Label Format 1—Wr ite a 96-bit T ag in Hexadecimal Resulting Label Programmed to T.
RFID Guidel ines Creating Basic RFID Labe l Formats 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 71 RFID Label Format 2—Wr ite a 64-bit T ag in Hexadecimal Resulting Label Programmed to T ransponder 1122334455667788 Front Panel Display Line Number T ype This ZPL Code Function of ZPL Code 1 ^XA Indicates start of label format.
72 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines Creating Basic RFID Label Forma ts RFID Label Format 3—Wr ite a 96-bit T ag in ASCII This label format is dif ferent in what shows on the front panel. Th e front panel alwa ys displays RFID data in hexadecimal.
RFID Guidel ines Creating Basic RFID Labe l Formats 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 73 RFID Label Format 4—Read Dat a from T ag and Print on Label This example a ssumes that the t ag created us ing RFID Label Format 1—W rite a 96-bit T ag in Hexadecimal on page 70 is being read.
74 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines Creating Basic RFID Label Forma ts RFID Label Format 5—Wr ite T ag, Re ad T ag, and Print Dat a on Label Programmed to T r.
RFID Guidel ines Creating Basic RFID Labe l Formats 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 75 RFID Label Format 6—Wr ite T ag, Read T ag, an d Return Results to Host Programmed to .
76 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines Creating Basic RFID Label Forma ts Front Panel Display Sent to Host Computer 0102030405 000000 RFID TAG DATA 010203040500000.
RFID Guidel ines ZPL II Commands for RFID 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 77 ZPL II Commands for RFID This section contains the ZPL commands for RF ID-specific applications. For non-RFID ZPL commands, refer to the ZPL II Pr ogramming Guide (part number 46530L).
78 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^HR ^HR Calibrate RFID T ransponder Position Description This command initiates an RFID tr an sponder cal ibration fo r a specific RFID label and retu rns the results to the host compu ter .
RFID Guidel ines ^HR 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 79 • At the end o f calibration, a results table is returned to the host.
80 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^HV ^HV Host V erification Description This command is used to return data from specified fields, along wit h an optional ASCII header , to the host computer .
RFID Guidel ines ^RB 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 81 ^RB Define EPC Dat a Struc ture Description This command defi nes the structure of EPC data, whic h can be read from or written to an RFID transponder . RFID transponders can have different partitions defined.
82 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RB Example 3 • This example uses the SCTIN-64 standa rd, wh ich defines 64-bit stru cture in the following way: The ZPL c.
RFID Guidel ines ^RF 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 83 ^RF Read or Write RFID Format Description This command allows you to read or write to an RFID tag. Format ^RFo,t,b,n The following table id entifies the parameters for this format.
84 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RF Examples • Wri te A SC I I This example writes 96-bit data. ^XA ^RS4 ^RFw,a^FD00 my data^FS ^XZ Wri te H ex This example writes 64-bit data. ^XA ^RS3 ^RFW,H^FD1122334455667788^FS ^XZ Wri te E PC This example writes 96-bit dat a, as specified by the ^RB command.
RFID Guidel ines ^RM 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 85 ^RM Enable RFID Motion Description This command enables or disables RFID motion.
86 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RR ^RR S pecify RFID Retries for a Block Description This command changes the numb er of times that the printer attempts to rea d or write to a particu lar block of a single R FID tag.
RFID Guidel ines ^RS 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 87 ^RS RFID Setup Description This command sets u p parameters including tag type, rea d/write position of the transponde r , and erro r handling. Format ^RSt,p,v,n,e,a,c,s The following table id entifies the parameters for this format.
88 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RS e = error hand ling If an error persists after the speci fied number of l abels are tried, perform t h is error handling actio n.
RFID Guidel ines ^RS 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 89 Example 1 • This example sets the printer to move the medi a to 800 dots from the top o f the media [or label le ngth minus 800 from t he bottom (leading edge) of the media] and voids the rest of the me dia in case of an error .
90 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RS Example 2 • This example sets the printer to move the medi a to 800 dots from the top o f the media [or label lengt h - 500 from the bottom (leading edge) of the media] and prints “VOID” 500 dots in vertical length (Y axis) in case of an error .
RFID Guidel ines ^RT 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 91 ^RT Read RFID T ag Description This command tells the printer to read the current RFID tag data. Th e data can be sent back to the host via t he ^HV command. Format ^RT#,b,n,f,r,m,s The following table id entifies the parameters for this format.
92 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RT Example • This sample reads a tag, prints the da ta on a label, and sends the string Tag Data: xxxxxxxx back to the host. The data read will go into the ^FN1 locatio n of the format.
RFID Guidel ines ^RW 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 93 ^RW Set RFID Read and Write Power Levels Description This command sets the read and writ e power levels. This function is useful when using dif ferent tag types or transpond ers that require dif ferent power levels t o obtain the best read and write abilities.
94 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^RZ ^RZ Set RFID T ag Password Description This command lets you defi ne the password fo r the tag du ring writing. Format ^RZp The following table id entifies the parameters for this format.
RFID Guidel ines ^WT 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 95 ^WT W rite T ag Description This command allows you to program th e current RFID tag. Format ^WTb,r,m,w,f,v The following table id entifies the parameters for this format.
96 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^WT f = data format Accepted values: • 0 (ASCII) • 1 (Hexadecimal) Default value: 0 v = veri fy valid data Used only for A lien Class 1 tag s, which have preprogrammed data in them.
RFID Guidel ines ^WV 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 97 ^WV V erify RFID Write Operation Description If write veri fy is enabled, this command verifies the RFID write operat ion to ensure that the tag about t o be programmed contain s the hex data “A5A5” in the first two bytes.
98 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 RFID Guidelines ^WV Notes • ___________ ____________________ _____________________ ___________ ____ ___________ _____________________ ____.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 99 6 Data Ports This chapter describes the st andard communication ports available to connect t he printer to your computer or network . Content s Parallel Port . . . . . . . . . . . . . . . . .
100 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Dat a Port s Parallel Port Parallel Port When communicating v ia the parallel port, the values selected must be the same as those used by the host equipment connected to the printer . Port selection for statu s information is determined by the channe l sendin g the request.
Dat a Port s Parallel Port 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 101 18 +5 V at 750 mA The maximum current dr aw may be limited by op tion configuration. 19–30 Ground 31 ninit 32 nFault/NDataA vail 33, 34 Not used 35 +5 V through a 1.
102 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Dat a Port s Serial Port Serial Port T o communicate using the se rial data port of the printer , you must c hoose the number of dat a and stop bits, parity , and handshaking. Parity ap plies only to dat a transmitted by the printer because the parity of received dat a is ignored.
Dat a Port s Serial Port 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 103 Serial Pin Configuration Ta b l e 1 2 shows t he pin configu ration and function of th e rear pane l serial data conn ector on the printe r . T able 12 • Serial Connector Pin Configuration Pin No.
104 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Dat a Port s Serial Port RS-232 Interface Connections Direct Connection to a Computer The printer is con figured as Data T erminal Equipment (DTE). Figure 35 shows the internal connections of the printer ’ s RS-232 connector .
Dat a Port s Serial Port 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 105 DB-9 to DB-25 Connections An interface adapter is re quir ed (Zebra part number 33109M) to connect the printer ’ s DB-9 interface to a DB-25 connector .
106 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Dat a Port s Serial Port RS-422/RS-485 In terconnections An interface adapter (Zebra part number 331 14M ) is required t o connect the printe r ’ s RS-232 DB-9 interface to a host comput er through an RS-422 or RS-485 inte rface.
Dat a Port s USB 2.0 Port 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 107 USB 2.0 Port A USB 2.0 po rt (which is USB 1.1 and 1.0 compatible) is ava ilable to conn ect your printer t o the host equipment.
108 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Dat a Port s USB 2.0 Port Notes • ___________ ____________________ _____________________ ___________ ____ ___________ __________________.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 109 7 Memory Cards This chapter describes the o pti onal cards that can be used with the printer and gives instructions for insta llation. Content s PCMCIA Memory Card . . . . . . . . . . . . . .
11 0 R 11 0 Xi /R170 Xi User Guid e 23063L-003 Rev . 2 12/2 3/04 Memory Cards PCMCIA Memory Card PCMCIA Memory Card A T ype I- or T ype II-comp liant PCMCIA memory card holds extra memory or font op tions for the printer . The card is hot-swappable (it can be installed while the print er is on).
Memory Cards PCMCIA Memo ry Card 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 1 1 3. Reinstall the PCMCIA ca rd shield ov er the PCMCIA card and card slot.
11 2 R 11 0 Xi /R170 Xi User Guid e 23063L-003 Rev . 2 12/2 3/04 Memory Cards CompactFlash Card Comp actFlash Card A CompactFlash card is a nonvola t ile memory car d that stores data even when the power to the printer is turned of f. A T ype I-compli ant CompactFl ash card ho lds ex tra memory or optional fonts fo r your printer .
Memory Cards CompactFlash Card 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 13 5. Insert the CompactFlash card into the card slot on the upper portion of the op tion board. Insert the card wi th the back (unlabeled) side of the card f acing out.
11 4 R 11 0 Xi /R170 Xi User Guid e 23063L-003 Rev . 2 12/2 3/04 Memory Cards CompactFlash Card Notes • ___________ ____________________ _____________________ ___________ ____ ___________ __________.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 15 8 Routine Maintenance Cleaning yo ur printer regularl y maintains print quality and may extend the life of the prin ter . This section provid es routine cl eaning and maintenance pro cedures.
11 6 R 11 0 Xi /R170 Xi User Guid e 23063L-003 Rev . 2 12/2 3/04 Routine Maintenance Cleaning Schedule Cleaning Schedule The recommended clea ning schedule is sh own in Ta b l e 1 3 . See the followin g pages for specific procedures. Clean Exterior Clean the outside surfaces of the p rinter with a lint-free cloth.
Routine Maintenanc e Clean Interior 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 17 Clean Interior After every four roll s of media, inspect the inside of th e printer . Use a soft bristle brush or a vacuum cleane r to remove any dirt an d lint from the in terior of the printer .
11 8 R 11 0 Xi /R170 Xi User Guid e 23063L-003 Rev . 2 12/2 3/04 Routine Maintenance Clean Interi or Figure 43 • Cleaning the Printhead 4. Rotate the pl aten roller and clean tho roughly with solvent and an applic ator . 5. Brush or vacuum any accumulated paper lint and dust away from the rollers.
Routine Maintenanc e Clean Interior 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 1 19 Sensors Brush or vacuum any ac cumulated paper li nt and dust of f the sensors whenever the sensors are blocked. At minimum, clean the sensor s according to the recommendations in Clea ning Schedule on p age 1 16 .
120 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Routine Maintenance Clean Interi or T ransmissive (Med ia) Sensor Locations The locations of th e upper and lower transmissive (med ia) sensors are shown in Figu re 45 and Figure 46 .
Routine Maintenanc e Clean Interior 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 121 Snap Plate Clean the snap plate when label adhesive or a label is stuck to the underside . Figure 47 shows the loca tion of the snap plate Figure 47 • Snap Plate Location T o clean the snap plate, complete these steps: 1.
122 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Routine Maintenance Replace Fuse Replace Fuse The R1 10 Xi fuse must be replaced only by an authorized service technician. The printer uses a metric-style fuse (5 × 20 mm IEC) rated at F5A, 250 V .
Routine Maintenanc e Replace Fu se 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 123 Figure 49 • Fuse Locations 3. Snap the fuse hold er back into th e AC power entry module.
124 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Routine Maintenance Replace Fuse Notes • ___________ ____________________ _____________________ ___________ ____ ___________ ___________.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 125 9 Troubleshooting This chapter provides you with i nformation about LCD, pri nt quality , communicat ions, and other errors that you might need to troubleshoot. Content s T roubleshooting . .
126 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting T roubleshooting T roubleshooting If an error condition exist s with the printer , review this chec klist: Is there an error message on the LCD? If yes, see LCD Error Messages on pa ge 127 for more infor mation.
T roubleshooting LCD Error Messages 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 127 LCD Error Messages The LCD disp lays me ssages when there is an error . See Ta b l e 1 4 for LCD errors, the possible causes, and the recommended solut ions.
128 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting LCD Error M essages RIBBON IN Ribbon is loaded, but the printer is set for Direct Thermal mode.
T roubleshooting LCD Error Messages 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 129 HEAD COLD Caution • An improperly connected p rinthead dat a or power cable can cause this error message. The printhead can still be hot enough to cause severe burns.
130 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting Print Quality Problems Print Quality Problems Ta b l e 1 5 identifies problems with prin t quality , the possible cause s, and the recommended solutions.
T roubleshooting Print Quality Problems 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 131 Light, con s istent vertical lines running through the labels The printhead or platen roller i s dirty . Clean the printhead and plat en roller as inst ructed in Printhead and Platen Roller on page 117 .
132 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting Communications Problems Communications Problems Ta b l e 1 6 identifies problems with communica tions , the possibl e causes, and the recommended solutions.
T roubleshooting Miscellaneous Printing Prob lems 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 133 Miscellaneous Printing Problems T able 17 • Miscellane ous Printing Problems Problem Possible Cause Recommended Solution The printer fails to calibrate or detect the top of the label.
134 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting Printer Diagnostics Printer Diagnostics Self tests give informa tion about the condi tion of the printer . The most commonly used are the Power-On and the CANCEL self tests.
T roubleshooting Printer Diagnostics 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 135 CANCEL Self T est The CANCEL self test print s a printer configu r ation label, which tells yo u the current setti ngs for the printer . T o perform the CANCEL Self T est, complete these steps: 1.
136 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting Printer Diagnostics P AUSE Self T est This self test can be used to prov ide the test lab els required when mak ing adjustments to the printer ’ s mechanical assemblies. See the sample printo ut below .
T roubleshooting Printer Diagnostics 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 137 FEED Self T est This test helps you ch oose the best darkness settin g for your printer . T o perform a FEED self test, complet e these steps: 1. T urn Off ( O ) the printer .
138 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 T roubleshooting Printer Diagnostics FEED and P AUSE Self T est Performing this self test temporarily resets the prin ter configuration to the factory default values. These v alues are active only until po wer is turned o ff un less you save them permanently in memory .
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 139 A Specifications This appendix p rovides the features of an d specifications for the R1 10 Xi /R170 Xi prin ters. Content s Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
140 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Specification s Features Features This section lists th e standard and op tional features for the printer . S t an dard Features • Thermal transfer and direct thermal printing • DRAM 16 MB •U S B 2 .
Specificatio ns Features 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 141 Bar Codes T ypes of bar co des include: Agency Approvals Approvals include: • Binati onal UL 60950 3rd edi tion/CSA CA N/CSA-C22.2 No . 60950-00 3rd edition • FCC Part 1 5.
142 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Specification s General S pecifications General Specifications Electrical S pecifications Environment al Conditions for Operation an d Storage Dimensions R1 10 Xi R170 Xi Height 15.5 in (393.
Specificatio ns Print S pecifications by Model 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 143 Print S pecifications by Model Refer to the key and the table that follows for pr inter specificatio ns. Model Specifications Key This table contains the key for print specifications for the tables that fo llows.
144 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Specification s Print S pecifications by Model R170 Xi Print Specif ications 170 Xi 2 00 dpi 170 Xi 300 d pi Printhead resolu tion 203 dots/inch (8 dots/mm) 300 dots/in ch (12 dots/mm) Dot size (wid th×length) 0.
Specificatio ns Ribbon S pecifications by Model 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 145 Ribbon Specifications by Model Refer to the t able that follows for ribbon specifi cations for yo ur type of printer . Note • Match the ri bbon to the label widt h and printhead width that you are u sing.
146 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Specification s Label S pecifications Label S pecifications R1 10 Xi /R170 Xi printers need the correct size and type of labels for best performance. Refer to the tables that fo llow for the specifications.
Specificatio ns Label S pecifications 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 147 Black Mark Sensing Only Label Specifications R1 10 Xi 200 dpi R1 10 Xi 300 d pi R170 Xi Mark length (measuring parallel t o label/tag ed ge) 0.12 in. (3 mm) 0.
148 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Specification s Label S pecifications Notes • ___________ ____________________ _____________________ ___________ ____ ___________ ______.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 149 Proprietary Statement This manual contai ns proprietary informat ion of Zebra T echnologies Corporatio n and its subsidiaries (“Zebra T echnologies”) . It is intend ed solely for the inform ation and use of parties operating and mai ntaining the equipment descri bed herein.
150 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Propriet ary St atement The user is cautioned that any changes or modificati ons not expressly approved by Zebra T echnologies co uld void the user ’ s authori ty to operate the equipment.
Propriet ary St atement 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 151.
152 R1 10 Xi /R170 Xi User Guide 23063L-003 R ev . 2 12/23/04 Propriet ary St atement.
23063L-003 Rev . 2 12/22/04 R1 10 Xi /R170 Xi User Guide 153 Warranty Information Effective December 30, 2002 All new Zebra products are warrant ed by the manufa cturer to be free from defec t in material and workmanship. Printers and Related Hardware Product s Proof of purchase or shi pment date is requ ired to validate the warranty perio d.
154 R1 10 Xi /R170 Xi User Guide 12/22/04 23063L-003 Rev . 2 W arranty Information Printheads Because printhead wear is part of normal oper ation, t he original prin thead is covered by a limited warranty as indicated bel ow . W arranty perio d begins on purchase date.
W arranty Information 23063L-003 Rev . 2 12/22/04 R1 10 Xi /R170 Xi User Guide 155 Supplies Product s Supplies are warranted to be free from defect in material and workma nshi p for a period of six (6) months fo r media and twel ve (12) months for ribbon fro m the date of shipment by Zebra.
156 R1 10 Xi /R170 Xi User Guide 12/22/04 23063L-003 Rev . 2 W arranty Information Notes • ___________ ____________________ _____________________ ___________ ____ ___________ _____________________ _.
23063L-003 Rev . 2 12/17/04 R1 10 Xi /R170 Xi User Guide 157 Printer Software and Firmware License Agreement YOU SHOULD CAREFULL Y READ TH E FOLLOWING TERMS AND CONDITIONS OF THIS ZEBRA TECHNOLOGIES PRINTER SOFTW ARE AND FIRMW ARE LICENSE AGREEMENT (PSFLA) BEFORE USING TH E PRINTER WHICH IS ENCLOSED OR OTHER WISE ASSOCIA TED WITH THIS AGREEMENT .
158 R1 10 Xi /R170 Xi User Guide 12/17/04 23063L-003 Rev . 2 Printer Sof t ware and Firmware License Agreement • Reservation of Rig hts. All rights not expressl y granted are reserved by ZEBRA. • Accessing Services Using the SOFTW ARE and FIRMW ARE.
Printer Sof tware and Firmware License Agreement 23063L-003 Rev . 2 12/17/04 R1 10 Xi /R170 Xi User Guide 159 4. TERMINA TION. W i thout prejud ice to any ot her rights, ZEBRA may terminate t his PSFLA if you fail to comply with the terms an d conditions of t his PSFLA.
160 R1 10 Xi /R170 Xi User Guide 12/17/04 23063L-003 Rev . 2 Printer Sof t ware and Firmware License Agreement 8. DISCLAIMER OF W ARRANTIES. ZEBRA AND ITS SUPPLIERS PROVID E THE SOFTW ARE AND/OR FIRMW.
Printer Sof tware and Firmware License Agreement 23063L-003 Rev . 2 12/17/04 R1 10 Xi /R170 Xi User Guide 161 ARISING FROM OR RELA TED TO ALL CLAIMS CONCERNING THE SOFTW ARE AND/OR FIRMW ARE OR ITS USE.
162 R1 10 Xi /R170 Xi User Guide 12/17/04 23063L-003 Rev . 2 Printer Sof t ware and Firmware License Agreement Notes • ___________ ____________________ _____________________ ___________ ____ _______.
23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 163 Index A adhesive test for ribbon coating, 17 adjustments LCD, 58 left position, 55 lower media sensor , 38 media sensors, 37 print darkness.
164 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 Index CompactFlash card format, 48 installation, 1 12 components, 6 configur ation enter setup mo de, 42 exit setup mode, 42 configur ation.
Index 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 165 H HEAD COLD message, 129 HEAD ELEMENT BAD message, 127 HEAD OPEN message, 127 HEAD TOO HOT message, 128 host handshake se tting, 51 h.
166 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 Index N network configur ation label printing as baseline, 34 network ID set ting, 52 non-contin uous media described, 14 setting media typ.
Index 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 167 printer settings (continued) resynch mode, 58 RFID settings, 62 RFID tag type, 63 saving, 42 sensor type, 45 serial communi cations, .
168 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 Index S schedule for cleaning, 116 scratch test media type, 16 ribbon coated side, 1 7 SCTIN-64 standard programming example, 82 select a p.
Index 23063L-003 Rev . 2 12/23/04 R1 10 Xi /R170 Xi User Guide 169 troubleshoot ing checklist, 126 communications prob lems, 132 LCD error messages, 127 print quality pr oblems, 130 printer diagn osti.
170 R1 10 Xi /R170 Xi User Guide 12/23/04 23063L-003 Rev . 2 Index Notes • ___________ ____________________ _____________________ ___________ ____ ___________ _____________________ _________________.
.
Zebra T echnologies Corporation 333 Corporate W oods Parkway V ernon Hills, Illino is 60061.3109 U.S.A. T elephone: +1 847.634.6700 Facsimile: +1 847.913.
Een belangrijk punt na aankoop van elk apparaat Zebra Technologies R170XiTM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Zebra Technologies R170XiTM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Zebra Technologies R170XiTM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Zebra Technologies R170XiTM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Zebra Technologies R170XiTM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Zebra Technologies R170XiTM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Zebra Technologies R170XiTM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Zebra Technologies R170XiTM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
