Gebruiksaanwijzing /service van het product R50W47 van de fabrikant Zenith
Ga naar pagina of 36
© Copyright 2004, LG Electronics USA, Inc. Installation and Operating Guide | W arranty Model Numbers | R45W47, R50W47, R57W47 | Projection TV.
2 Projection TV Warning W ARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Owner ’s Manual 3 Safety Instructions Important safeguards for you and your new product Y our product has been manufactured and tested with your safety in mind.
4 Projection TV Safety Instructions Antenna Lead in Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductor (NEC Section 810-21) Ground Clamps Po wer Service Grounding Electrode System (N.
Owner ’s Manual 5 Contents After reading this manual, keep it handy for future reference. W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Projection TV Introduction Introduction Introduction Controls Controls Securing TV Position • Position the TV and prevent it from being moved, by placing the 4 stoppers under the roller casters on the bottom of the TV . • Casters (on TV bottom) Use to turn and move the TV easily .
Owner ’s Manual 7 Introduction Connection Options Connection Options.
8 Projection TV Introduction - When using the remote control, aim it at the remote control sensor on the TV . Installing Batteries • Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -).
Owner ’s Manual 9 Installation - Antenna or Cable Service without a Cable Box Connections - For optimum picture quality , adjust antenna direction if needed.
10 Projection TV Installation Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number . Connection Option 2 1. Connect the audio/video output jacks on VCR to the corre- sponding input jacks on the TV .
Owner ’s Manual 11 Installation • Component Input ports T o get better picture quality , connect a DVD player to the component input ports as shown below . How to connect Connect the audio/video output jacks from the external A/V equipment to the corresponding input jacks on the TV .
12 Projection TV Installation Send the TV ’ s audio to external audio equipment (stereo system) via the Digital Audio Optical Output port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio Optical Output port. 2. Connect the other end of the optical cable to the digital audio optical input on the audio equipment.
Owner ’s Manual 13 Operation On-screen Menus Language Selection On-screen Menus Language Selection TV Operation Overview TV Operation Overview - The menus can be shown on the screen in the selected language. First select your language. 1. Press the menu button and then use D / E button to select the OPTION menu.
14 Projection TV Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Select antenna input, press MENU - Automatically finds all channels available through the antenna and cable sources, and stores them in memory on the channel list . - Run EZ Scan again after any Antenna/Cable connection change.
Owner ’s Manual 15 Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. EZ Scan Ch.Edit DTV Signal Ch. Label G Main Input Sub Input MENU Selection ( G or ) leads you to the channel logo screen.
16 Projection TV Operation - Adjust the picture appearance to suit your preference and viewing situation. 1. Press the menu button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option ( Contrast , Brightness , Color , Sharpness , or Tint ) .
Owner ’s Manual 17 Operation - Use to quickly reset all the Video menu options to their original factory preset values. - Automatically adjusts the picture for optimum quality . 1. Press the menu button and then use D / E button to select the VIDEO menu.
18 Projection TV Operation - Other languages may be available if a digital signal is provided by the broad- casting station. Audio Menu Options Audio Menu Options 1.
Owner ’s Manual 19 Operation SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Audio Language EZ SoundRite EZ Sound Balance T reble Bass Front Surround G TV Speaker Off 3D EchoSound System SRS T ruSurround XT MENU SETUP VIDEO AUDIO TIME OPTION LOCK Prev.
20 Projection TV Operation T T ime Menu Options ime Menu Options SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Auto Clock G Manual Clock Off Timer On Timer Sleep Timer Auto Off Off On Time Zone Eastern MENU SETUP VIDEO AUDIO TIME OPTION LOCK Prev. Auto Clock Manual Clock Off Timer On Timer G Sleep Timer Auto Off Off On Ti me 6 : 30 AM Ch.
Owner ’s Manual 21 Operation Auto Of Auto Of f f - If set to on and there is no input signal, the TV turns of f automatically after 10 minutes. 1. Press the menu button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto off .
22 Projection TV Operation Option Menu Features Option Menu Features Caption Caption 1. Press the cc button repeatedly to select Caption Off , EZ Mute , or On . • EZ Mute shows the selected captions option (if available on program) when the TV sound is muted .
Owner ’s Manual 23 Operation Caption Mode Caption Mode Analog Broadcasting System Captions - Select a caption mode for displaying captioning information if provided on a program. - Analog caption displays information at any position on the screen usually the program's dialog.
24 Projection TV Operation - When the TV is first installed or relocated, the picture may be unstable and have three color ghosts (red, green, blue). This problem can be solved with Auto Convergence. - This function can adjust the picture color convergence automatically if the TV is receiving a stable signal.
Owner ’s Manual 25 Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcasting station.
26 Projection TV Operation Parental Lock Setup Parental Lock Setup 1. Press the menu button and then use D / E button to select the LOCK menu. Th en , press the G button • If Lock is already set, enter the password as requested. • The TV is set up with the initial password “ 7-7-7-7 ” .
Owner ’s Manual 27 Operation W W atching PIP/POP/T atching PIP/POP/T win Picture win Picture - PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
28 Projection TV Operation Moving the PIP Moving the PIP Sub Picture Sub Picture In PIP mode, use the D / E / F / G buttons to move the sub picture to a different location on the screen.
Owner ’s Manual 29 Programming the Remote G The remote control is a multi-brand or universal remote control. It can be pro- grammed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands.
30 Projection TV Programming Codes Programming Codes Programming Codes VCRs VCRs AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 C.
Owner ’s Manual 31 Programming Codes APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 P ANASONIC.
32 Projection TV T roubleshooting Checklist No color , but the sound is okay . • Check the color settings in the Video menu. • T ry another channel. The problem may be with the broadcast. Picture has a big black box on it, but the sound is okay . • The analog caption option may be set up for T ext mode.
Owner ’s Manual 33 T roubleshooting Checklist The PIP inset is black or lacks contrast. • Check to be sure that the PIP source is turned on. • Check that all the wires are connected properly . • Check to see if your input source for PIP is set correctly .
34 Projection TV Maintenance & Product Specification Product Specifications Product Specifications MODEL AC 120V , 60Hz American TV Standard, NTSC, A TSC with STB VHF 2 ~ 13, UHF 14 ~ 69, CA TV 1 .
Owner ’s Manual 35 Notes Notes Notes.
CUSTOMER INTER-ACTIVE CENTER NUMBERS: For nearest Authorized Service Center, Where to buy, Product Assistance, or Customer Assistance Call 1-877-9Zenith (1-877-993-6484) (24 hours a day, 365 days per year) and select an appropriate option from the menu.
Een belangrijk punt na aankoop van elk apparaat Zenith R50W47 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Zenith R50W47 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Zenith R50W47 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Zenith R50W47 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Zenith R50W47 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Zenith R50W47 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Zenith R50W47 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Zenith R50W47 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
