Gebruiksaanwijzing /service van het product Telstra Turbo 7 van de fabrikant ZTE
Ga naar pagina of 42
1 Contents Contents 1 Introduction ............................................................................................... 3 1.1 Introduction .................................................................................. 3 1.2 W arnings and Safety Notice .
2 Contents 3.6.1 Connection Settings .......................................................... 30 3.6.2 Security Settings ............................................................... 32 3.6.3 Network Settings ......................................
3 1 Introduction 1.1 Introduction Thank you for choosing the T elstra T urbo 7 Series HSP A modem. Please read this manual carefully and keep it for future reference. The pictures, symbols and contents in this manual are for reference only . They are cor- rect at the time of printing but they might not be completely identical with your modem.
4 Introduction the modem more than 20 centimetres away from such medical devices. T urn the modem off if necessary . Consult a physician or the manufacturer of the medical device before using the modem near such devices.
5 Always handle the modem with care. Be careful not to drop or bend the modem. There are no user serviceable parts inside the modem. Unauthorised dismantling or repair of the modem will void the warranty. 1 .3 Radiation from Electronic Devices The USB Wireless modem is a transmitting device with similar output power to a mobile phone.
6 Introduction 1.5 Functions This HSP A modem is peak rated at 7.2Mbps* downstream and 2Mbps* upstream in HSUP A mode. It supports SMS Messages over the cellular system, applied management, data concurrence, and MicroSD memory cards. * Actual speeds will be less.
7 Working V oltage 5V Current Consumption Resting: 100mA rms Max: 450mA rms Max Emitted Power In 3G WCDMA Mode: 250mW In 2G GSM/GPRS Mode: 2W External interface USB 2.
8 Installation 2 I nstallation 2.1 Modem Introduction 1. USIM Holder 2. MicroSD Card Slot 3. USB Connector 4. Modem Cover 2.2 Preparation Inser t the USIM card into the USB modem: Open the modem cover and gently pull the USIM holder out.
9 Insert the USIM card into the slider making sure the gold contacts are facing down and the bevelled edge is on the left hand side. Carefully close the slider so it clicks into place. Y our USIM card should support data services otherwise contact your ser- vice provider for more information.
10 Installation After a few seconds, the installation program will start automati- cally or be available to start (depending on your system and configuration) 2.
11 Click ‘ Next ’ to continue: Installation.
12 Installation Read the agreement carefully. If you agree, choose ‘I accept the terms of the license agreement’, and then click ‘Next’. Press ‘Next’ to accept the default folder location, or press ‘Change’ to de- fine your own path.
13 Please wait a few seconds for the installation to proceed and the following screen will show: Installation.
14 Installation Click ’Finish’ to complete the installation. Notes : The installation will create a new shortcut on your desktop and a new program listing under Start-Programs. If you have problems with the installation please contact your supplier or see our website, www .
15 When you have finished your internet or email connection remember to return to the software interface* and press Disconnect to end your session. * If the software has been minimized then double click the small icon on the task bar to re-open the application window.
16 Operation 3 Operation 3.1 Sof tware Interf ace The main screen of the modem software is divided into 3 parts as de- scribed below: System infomation area Function button s User area 1.
17 2. The System Information area displa ys the system status : The antenna icon indicates network signal strength from none to the strongest. The SMS icon indicates when there are new SMS messages. The Red Computer icon indicates the Internet status is Not Connected.
18 Operation 3. The User Area shows v arious messages and user dat a such as connec- tion time and download data . 3.2 T ask Bar Icons When you minimize the software the window will minimize to an icon on the system tray . The program is still active in the background but disap- pears to free your normal Windows space.
19 2. T ask bar menu Right Click the task bar icon to access the following menu: T elstra 7 Series Offline / T elstra 7 Series Online : Disconnect / Connect the modem from the network. Factory Settings : Restore the modem settings to their original values.
20 Operation 3.3 Connecting to the Internet Click the Internet button then click ‘Connect’ to proceed. The card takes a few seconds to verify your connection and then shows ‘State: connected to …’. The data amount, connected time etc are displayed in the main window as shown below.
21 Note : Depending on your Network Provider the modem can be locked to a specific network. If you use a SIM/USIM card from another service pro- vider you may not be able to connect to the network.
22 Operation Int ernet connection records : Click to show Internet connection records:.
23 3.4 SMS Inter face Click the SMS icon to use the SMS Interface: SMS T ools : Launches the T elstra online SMS application Inbox : Stores the received SMS. Outbox : Stores the successfully sent SMS. Drafts : Save any SMS not sent yet. The drafts can only be saved on the PC.
24 Operation 3.4.1 Read Incoming Messages Click the ‘ Inbox ’ button or the SMS icon on the system information area to read the SMS saved in the box.
25 3.4.2 Create a new message Click ‘ New Message ’ and enter the recipient’s number . The recipient’s number can be entered directly or by selecting entries from the Phonebook. Please use ‘;’ to separate multiple recipients. Click into the text field to enter text.
26 Operation Select ‘Y es’ to confirm. After the message has been sent successfully, the SMS will be saved in the outbox. If it fails to send it will be saved in the draft box. Send SMS while browsing the web : Y ou can send short messages while connected to the web if the network supports this feature.
27 3.4.3 SMS General Features Enter any of the Inbox / Outbox / Drafts to use the tabs at the bottom of the window: Read : Read the selected SMS. Reply : Reply to the selected SMS. Forward : Forward the SMS to other recipients. Mov e : Save the SMS on the PC or USIM/SIM card.
28 Operation Notes : If you want to select several messages, you can use the ‘Ctrl’ or ‘Shift’ keys. New messages can not be received when the USIM/SIM card is full (Different USIM/SIM cards have dif ferent capacities). The system will indicate the USIM/SIM inbox is full.
29 T o create a new contact click ‘ New ’ ’ New Contact ’, enter the details and select ‘ OK ’ to finish. If your stored location (Folder) is PC then you can also create a new Group. T o create a new group: Click ‘ New ’ ’ New Group ’ and enter the group name.
30 Operation SMS : Send messages to the mobile phone number selected. Sav e as : Save the contact information to a TXT file on your PC. Edit : Edit the contact information. 3.6 Settings Click the ‘ Settings ’ button to select the settings interface.
31 The default internet setting is pre-configured in your modem. Only change these settings on the advice of your service provider. Add : Add new configuration files. Delete : Delete the selected configuration files. Edit : Edit the selected configuration files.
32 Operation 3.6.2 Security Settings 1. Enable the PIN Code: Y ou can enable a PIN code using the ‘ PIN enable ’ feature. Y ou will need to enter your PIN to start the modem PIN code function. The PIN code is stored on the SIM card. Consult your service provider for more information or if you forget your PIN.
33 3.6.3 Network Settings There is no need to change any of these settings as they are pre-config- ured for your network. Consult your service provider for more information. 1. Operator Selection : (Network) Automatic : The system selects the preferred network automatically de- pending on the network status.
34 Operation 3. Band Selection Automatic : (Default) The system selects the frequency band automatically from the following priorities UMTS(850) UMTS (2100) UMTS (1900) GSM(900/1800) GSM(850) UMTS 850 + GSM 900/180 0 : the system is limited to UMTS 850MHz or GSM900/1800MHz only.
35 W ait up to 2 minutes for all the network information to complete. The avail- able networks will be displayed: Click on your preferred network and press ‘Select’ to connect. 3.6.4 Message Settings Normally there is no need to change any of these settings as they are pre- configured for your network.
36 Operation Message Center : The SMS center number is set by Network Provider . Contact your supplier for more information. Validity Period : Set the time limit for saving SMS on the network. The default setting is the maximum permitted by the network.
37 3.6.5 Aler t Settings Y ou can change your alert tones settings by choosing different audio files. The supported formats are MP3, WA V and MIDI. If you select ‘ Mute ’ the tone is muted.
38 3.7 MicroSD card If you use a MicroSD card in your modem your computer will display a removable disk related to the MicroSD card. Y ou can then use the modem as a flash drive to store and transfer files. Micro SD cards up to 2GB are F A T 16 format.
39 4 F AQ’s If you have any problems with your connection or modem please consult the manual and check this section. If the problem still exists contact your service provider or check our website for more details at www.
40 Data connection failed. Y o u have no network T ry moving location until coverage. you get good reception. The APN configuration Check with your service is wrong. provider and set the APN in the configuration settings. The manual network Select the correct network selection is wrong.
41 5 Sof tware R emoval If you wish to uninstall the application please follow the procedure below: Click ‘ Star t Programs T elstra T urbo Connection Manager Unins tal l ’ menu on the laptop or desktop PC.
42 When the uninstall is finished click ‘ Finish ’ to restart the computer and complete the application removal. Softwar e removal.
Een belangrijk punt na aankoop van elk apparaat ZTE Telstra Turbo 7 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ZTE Telstra Turbo 7 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ZTE Telstra Turbo 7 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ZTE Telstra Turbo 7 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ZTE Telstra Turbo 7 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ZTE Telstra Turbo 7 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ZTE Telstra Turbo 7 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ZTE Telstra Turbo 7 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
