Gebruiksaanwijzing /service van het product ADSL/ADSL2/ADSL2+ Router 660R-6xC Series van de fabrikant ZyXEL Communications
Ga naar pagina of 282
Prestige 660R-6xC Series ADSL/ADSL2/ADSL2+ Router User ’ s Guide V ersion 3.40 November 2004.
.
Prestige 660R-6xC Series User’s Guide Copyright 2 Copyright Copyright © 2004 by ZyXEL Communications Corpo ration. The contents of this publication may not be reprod uced in any part or as a whole,.
Prestige 660R-6xC Series User’s Guide 3 Federal Communications Commission (FCC) Interference Statement Federal Communications Commission (FCC) Interference S t atement This device complies with Part 15 of FCC rul es. Operation is subject to the following two conditions: • This device may not cause harmful interference.
Prestige 660R-6xC Series User’s Guide ZyXEL Limited Warranty 4 ZyXEL Limited W arranty ZyXEL warrants to the original en d user (purchaser) that this product is free from any defects in materials or workmansh ip for a period of up to tw o years from the date of purchase .
Prestige 660R-6xC Series User’s Guide 5 Customer Suppo rt Customer Support Please have the following information r eady when you contact customer support. • Product model and serial number . • W arranty Information. • Date that you received your de vice.
Prestige 660R-6xC Series User’s Guide 6 T able of Content s Copyright .................. ............................................................................................... . 2 Federal Communications Commissi on (FCC) Interference St atement .
Prestige 660R-6xC Series User’s Guide 7 3.1.1.1 ENET ENCAP ........... ................ ............. ................ ............. ............ 40 3.1.1.2 PPP over Ethernet .............. ................................................ ..........
Prestige 660R-6xC Series User’s Guide 8 Chapter 6 W AN Setup ..................................... ..................................................... .................... 60 6.1 W AN Overview .......................... ............. .............
Prestige 660R-6xC Series User’s Guide 9 10.1.3 System Timeout ............ ............. ................ ............. ............. ............. .....87 10.2 T elnet .......................... ............. ................ ............. ........
Prestige 660R-6xC Series User’s Guide 10 Chapter 15 Menu 2 W AN Backup Setup .............................................................. .................. 124 15.1 Introduction to W AN Backup Setup ... ... .......... ................ ...........
Prestige 660R-6xC Series User’s Guide 11 Chapter 19 St atic Route Setup ............................................. .................................................. 150 19.1 IP S tatic Route Overview ..................... ................ ......
Prestige 660R-6xC Series User’s Guide 12 Chapter 23 SNMP Configuration .......................................................................... .................. 188 23.1 About SNMP ........................ ................ ............. ........
Prestige 660R-6xC Series User’s Guide 13 Chapter 26 System Maintenance .......................................................................... .................. 214 26.1 Command Interpreter Mode .......... ............. ............. ...........
Prestige 660R-6xC Series User’s Guide 14 Appendix A Splitters and Microfilters ......................................................... ............................ 242 Connecting a POTS Splitter ...... ............. ................. ............ .
Prestige 660R-6xC Series User’s Guide 15 Appendix F Command Interpreter .................................................................................... ....... 268 Command Syntax ...... ............. ................ ............. .............
Prestige 660R-6xC Series User’s Guide 16 List of Figures Figure 1 Prestige Internet Access Applicati on ... ............. ................ ............. ................ ....... 34 Figure 2 Prestige LAN-to-LAN Application ...... ............. ......
Prestige 660R-6xC Series User’s Guide 17 Figure 37 Windows Optional Networking Components Wizard ................... ................ ....... 94 Figure 38 Networking Services . ................ ... ...... ................. ............ .............
Prestige 660R-6xC Series User’s Guide 18 Figure 80 Menu 21.12 W ebSet 12 ..... ................ ................. ............ ................. ................ ... 147 Figure 81 Menu 1 1.6 for VC- based Multiplexing .......... ................ ...
Prestige 660R-6xC Series User’s Guide 19 Figure 123 Sample T elnet Filter ................... ............. ............. ............. ................ ............. ... 184 Figure 124 Menu 21.6.1 Sample Filter . ............. ................. ...
Prestige 660R-6xC Series User’s Guide 20 Figure 166 Connecting a POTS Splitter ....... ................ ............. ................ ................ .......... 242 Figure 167 Connecting a Microfilter ... ................ ................. .......
Prestige 660R-6xC Series User’s Guide 21.
Prestige 660R-6xC Series User’s Guide 22 List of T ables T able 1 ADSL S tandards ...... ................ ................. ............. ................ ............. ................ ... 30 T able 2 Web Configurator Screens Summary ..............
Prestige 660R-6xC Series User’s Guide 23 T able 37 DHCP Ethernet Setup ........... ................. ............. ................ ................ ............. ... 130 T able 38 TCP/IP Ethernet Setup .......... ............. ................. ...
Prestige 660R-6xC Series User’s Guide 24 T able 80 Troubleshooting Remote Management ........... ................ ................. ................ ... 241 T able 81 Classes of IP A ddresses ........... ................ ................ ...........
Prestige 660R-6xC Series User’s Guide 25.
Prestige 660R-6xC Series User’s Guide Preface 26 Preface Congratulations on your p u rchase of the Prestige 660R-6xC ADSL/ADSL2/ A DSL2+ Router . Y our Prestige is easy to install and configure. About This U ser's Guide This manual is designed to guide you th rough th e config uration of your Prestige for its various applications.
Prestige 660R-6xC Series User’s Guide 27 Preface The Quick S tart Guide is designed to help you get up and running right away . They contain connection information and instructions on getting st arted. • W eb Configurator Online Help Embedded web help for descriptions of individual screens and supplementary information.
Prestige 660R-6xC Series User’s Guide Introduction to DSL 28 Introduction to DSL DSL (Digital Subscriber Line) te chnology enhances the data ca pacity of the existing twisted- pair wire that runs betwee n the local telephone co mpany switching of fi ces and most homes and offices.
Prestige 660R-6xC Series User’s Guide 29 Introduction to DSL.
Prestige 660R-6xC Series User’s Guide Chapter 1 Getting To Kn ow Your Prestige 30 C HAPTER 1 Getting T o Know Y our Prestige This chapter describes the key features and applications of your Prestige.
Prestige 660R-6xC Series User’s Guide 31 Chapter 1 G etting To Know Your Pres tige High Speed Internet Access Y our Prestige ADSL/ADSL2/ADSL2+ router can support downstream transmission rates of up to 24Mbps and upst ream tran smission rates of 3.5Mbps.
Prestige 660R-6xC Series User’s Guide Chapter 1 Getting To Kn ow Your Prestige 32 Multiple P VC (Permanent Virtual Circuit s) Support Y our Prestige supports up to 8 PVC’ s. ADSL S t andards • Full-Rate (ANSI T1.413, Issue 2; G .dmt (G .992 .1) with line rate support of up to 8 Mbps downstream and 832 Kb ps upstream.
Prestige 660R-6xC Series User’s Guide 33 Chapter 1 G etting To Know Your Pres tige • ICMP support • A TM QoS support • MIB II support (RFC 1213 ) Networking Comp atibility Y our Prestige is compatible with the majo r ADSL DSLAM (Digital Subscriber Line Access Multiplexer) providers, making configur ation as simple as possible for you.
Prestige 660R-6xC Series User’s Guide Chapter 1 Getting To Kn ow Your Prestige 34 • LAN port Packet Filters The Prestige's packet filtering functions a llows added network security and management. Ease of Inst allation Y our Prestige is designed for quick, intuitive and easy installation.
Prestige 660R-6xC Series User’s Guide 35 Chapter 1 G etting To Know Your Pres tige Figure 2 Prestige LAN-to-LAN Application 1.1.3 Prestige Hardware In st allation and Connection Refer to the Quick S tart Guide for information on hardware installation and connection and LED descriptions.
Prestige 660R-6xC Series User’s Guide Chapter 2 Introducing the Web Configur ator 36 C HAPTER 2 Introducing the W eb Configurator This chapter describes how to access and navigate the web configurator .
Prestige 660R-6xC Series User’s Guide 37 Chapter 2 Introducing the Web Configurator 6 It is highly recommended you change the de fault password! Enter a new password, retype it to confirm and click Apply ; alternatively click Ignor e to proceed to the main menu if you do not want to chang e the password now .
Prestige 660R-6xC Series User’s Guide Chapter 2 Introducing the Web Configur ator 38 • Click W izard Setup to begin a series of screens to config ure your Prestige for the first time. • Click a link un der Advanced Setup to configure advanced Prestige feature s.
Prestige 660R-6xC Series User’s Guide 39 Chapter 2 Introducing the Web Configurator Remote Management Use this screen to configure thr ough which inte rface(s) and from which IP address(es) users can use T elnet/FTP/Web to manage the Prestige. UPnP Use this screen to enable UPnP on the Prestige.
Prestige 660R-6xC Series User’s Guide Chapter 3 Wizard Setup 40 C HAPTER 3 W izard Setup This chapter provides informatio n on the W izard Setup screens for Internet access in the web configurator .
Prestige 660R-6xC Series User’s Guide 41 Chapter 3 Wizard Setup 3.1.1.4 RFC 1483 RFC 1483 describes two methods for Multipro tocol Encapsulation over A TM Adaptation Layer 5 (AAL5).
Prestige 660R-6xC Series User’s Guide Chapter 3 Wizard Setup 42 Figure 6 Internet Access Wizard Setup: First Screen The following table describes the labels in this screen. 3.2 IP Address and Subnet Mask Similar to the way houses on a street share a common street name, so too do computers on a LAN share one common network number .
Prestige 660R-6xC Series User’s Guide 43 Chapter 3 Wizard Setup If the ISP did not expl icitly give you an IP network n u mber , then most likely you have a sin gle user account and the ISP will assign you a d ynamic IP address when the connection is established.
Prestige 660R-6xC Series User’s Guide Chapter 3 Wizard Setup 44 3.2.1.4 Private IP Addresses Every machine on the Internet must ha ve a unique address. If your ne tworks are isolate d from the Internet, for example, only between your two branch of fice s, you can assign any IP addresses to the hosts without problems.
Prestige 660R-6xC Series User’s Guide 45 Chapter 3 Wizard Setup Figure 7 Internet Connection with PPPoE The following table describes the labels in this screen. Table 4 Internet Connection with PPPoE LABEL DESCRIPTION Service Name T ype the name of your PPPoE service here.
Prestige 660R-6xC Series User’s Guide Chapter 3 Wizard Setup 46 Figure 8 Internet Connection with RFC 1483 The following table describes the labels in this screen. Figure 9 Internet Connection with ENET ENCAP Table 5 Internet Connection with RFC 1483 LABEL DESCRIPTION IP Address This field is available if you select Routing in the Mode field.
Prestige 660R-6xC Series User’s Guide 47 Chapter 3 Wizard Setup The following table describes the labels in this screen. Figure 10 Internet Connection with PPPoA Table 6 Internet Connection with ENET ENCAP LABEL DESCRIPTION IP Address A static IP address is a fixed IP that your ISP give s you.
Prestige 660R-6xC Series User’s Guide Chapter 3 Wizard Setup 48 The following table describes the labels in this screen. 3.2.5 DHCP Setup DHCP (Dynamic Host Configuration Protocol , RFC 2131 and RFC 2132) allows indiv idual clients to obtain TCP/IP configuration at star t-up from a server .
Prestige 660R-6xC Series User’s Guide 49 Chapter 3 Wizard Setup Figure 1 1 Internet Access Wizard Setup: Third Screen If you want to change your Prestige LAN settings, click Change LAN Configuration to display the screen as shown next.
Prestige 660R-6xC Series User’s Guide Chapter 3 Wizard Setup 50 Figure 12 Internet Access Wizard Setup: LAN Configuration The following table describes the labels in this screen.
Prestige 660R-6xC Series User’s Guide 51 Chapter 3 Wizard Setup 3.2.7 Internet Access Wizard Setup: Connection T est The Prestige automatically tests the connectio n to the computer(s) connected to the LAN ports. T o test the connection from the Prestige to the ISP , click S tart Diagnose .
Prestige 660R-6xC Series User’s Guide Chapter 4 Password Setup 52 C HAPTER 4 Password Setup This chapter provides information on the Password scre en. 4.1 Password Overview It is highly recommended that you ch ange the password for accessing the Prestige.
Prestige 660R-6xC Series User’s Guide 53 Chapter 4 Password Setup.
Prestige 660R-6xC Series User’s Guide Chapter 5 LAN Setup 54 C HAPTER 5 LAN Setup This chapter describes how to configure LAN settings. 5.1 LAN Overview A Local Area Network (LAN) is a shared comm unication system to which many computers are attached.
Prestige 660R-6xC Series User’s Guide 55 Chapter 5 LAN Setup 5.2 DNS Server Address DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. The DNS server is extremely impo rtant because without it, you must know the IP address of a machine before you can access it.
Prestige 660R-6xC Series User’s Guide Chapter 5 LAN Setup 56 5.4 LAN TCP/IP The Prestige has built-in DHCP server capability that assigns IP addresses and DNS servers to systems that support DHCP client capability .
Prestige 660R-6xC Series User’s Guide 57 Chapter 5 LAN Setup 5.4.4 Multicast T raditionally , IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to a group of host s on the network - not everybody and not just 1.
Prestige 660R-6xC Series User’s Guide Chapter 5 LAN Setup 58 Figure 16 LAN Setup The following table describes the labels in this screen. Table 10 LAN Setup LABEL DESCRIPTION DHCP DHCP If set to Ser.
Prestige 660R-6xC Series User’s Guide 59 Chapter 5 LAN Setup IP Address Enter the IP address of your Prestige in dotted deci mal notation, for example, 192.168.1.1 (factory default). IP Subnet Mask T ype the subnet mask assigned to you by your ISP (if given).
Prestige 660R-6xC Series User’s Guide Chapter 6 WAN Setup 60 C HAPTER 6 W AN Setup This chapter describes how to configure W AN settings. 6.1 W AN Overview A W AN (W ide Area Network) is an outside conn ection to another network or the Internet. See Chapter 3 W izard Setup for more information on the fields in the W AN screens.
Prestige 660R-6xC Series User’s Guide 61 Chapter 6 WAN Setup 6.3 PPPoE Encap sulation The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF Draft standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.
Prestige 660R-6xC Series User’s Guide Chapter 6 WAN Setup 62 Figure 17 Example of T ra ffic Shaping 6.5 Configuring W AN Setup T o change your Prestige’ s W A N remote node settings, click WA N and W AN Setup . The screen differs by the encapsulation.
Prestige 660R-6xC Series User’s Guide 63 Chapter 6 WAN Setup Figure 18 W AN Setup (PPPoE) The following table describes the labels in this screen. Table 11 WAN Se t u p LABEL DESCRIPTION Name Enter the name of your Internet Service Provider , e.g., MyISP .
Prestige 660R-6xC Series User’s Guide Chapter 6 WAN Setup 64 Encapsulation Select the method of encapsulati on used by your ISP from the drop-down list box. Choices vary depending on the mode you select in th e Mode field. If you select Bridge in the Mode field, select either PPPoA or RFC 1483 .
Prestige 660R-6xC Series User’s Guide 65 Chapter 6 WAN Setup 6.6 T raffic Redirect T raffic redirect forwards traffic to a backup gateway when the Prestige cannot connect to the Internet. An exampl e is shown in the figu re below . Max Idle Timeout Specify an idle time-o ut in the Max Idle Timeout field when you select Connect on Demand .
Prestige 660R-6xC Series User’s Guide Chapter 6 WAN Setup 66 Figure 19 T raffic Redirect Example The following network topology allows you to avoid triangle route security issues when the backup gateway is co nnected to the LAN.
Prestige 660R-6xC Series User’s Guide 67 Chapter 6 WAN Setup Figure 21 W AN Backup The following table describes the labels in this screen. Table 12 WAN Ba c k up LABEL DESCRIPTION Backup T ype Select the method that the Prestige uses to check the DSL connection.
Prestige 660R-6xC Series User’s Guide Chapter 6 WAN Setup 68 T raffic Redirect Active Select this check box to have the Presti ge use traffic redirect if the normal W A N connection goes dow n. Note: If you activate traffic redirect, you must configure at least one Check W AN IP Address .
Prestige 660R-6xC Series User’s Guide 69 Chapter 6 WAN Setup.
Prestige 660R-6xC Series User’s Guide Chapter 7 Network Address Translatio n (NAT) Screens 70 C HAPTER 7 Network Address T ranslation (NA T) Screens This chapter discusses how to configure NA T on the Prestige.
Prestige 660R-6xC Series User’s Guide 71 Chapter 7 Network Addre ss Translation (NAT) Screen s 7.1.2 What NA T Does In the simplest form, NA T changes the sour ce IP address in a packet received from a subscriber (the inside local address) to anothe r (the inside global address) before forwarding the packet to the W A N side.
Prestige 660R-6xC Series User’s Guide Chapter 7 Network Address Translatio n (NAT) Screens 72 Figure 22 How NA T W orks 7.1.4 NA T Application The following figure illustrates a possible NA T application, wher e three inside LANs (logical LANs using IP Alias) behind the Prestige can communicate with three distinct W AN networks.
Prestige 660R-6xC Series User’s Guide 73 Chapter 7 Network Addre ss Translation (NAT) Screen s • One to One : In One-to-One mode, the Prestige maps one local IP address to one global IP address. • Many to One : In Many-to-One mode, the Prestige maps multiple local IP addresses to one global IP address.
Prestige 660R-6xC Series User’s Guide Chapter 7 Network Address Translatio n (NAT) Screens 74 7.3 SUA Server A SUA server set is a list of inside (behind NA T on the LAN) servers, for example, web o.
Prestige 660R-6xC Series User’s Guide 75 Chapter 7 Network Addre ss Translation (NAT) Screen s 7.3.3 Configuring Ser vers Behind SUA (Example) Let's say you want to assign po rts 21-25 to one FTP , T elnet and SMTP server (A in the example), port 80 to another (B in the exam ple) and assign a default server IP address of 192.
Prestige 660R-6xC Series User’s Guide Chapter 7 Network Address Translatio n (NAT) Screens 76 Figure 25 NA T Mode The following table describes the labels in this screen. 7.5 Configuring SUA Server Click NA T , select SUA Only and click Edit Details to open the following screen.
Prestige 660R-6xC Series User’s Guide 77 Chapter 7 Network Addre ss Translation (NAT) Screen s Figure 26 Edit SUA/NA T Server Set The following table describes the labels in this screen. T able 17 Edit SUA/NA T Server Set LABEL DESCRIPTION S tart Port No.
Prestige 660R-6xC Series User’s Guide Chapter 7 Network Address Translatio n (NAT) Screens 78 7.6 Configuring Address Mapping Ordering your rules is important because the Pr estige applies the rules in the order that you specify .
Prestige 660R-6xC Series User’s Guide 79 Chapter 7 Network Addre ss Translation (NAT) Screen s 7.7 Editing an Address Mapping Rule T o edit an address mapping rule, click the rule’ s link in the NA T Addr ess Mapping Rules screen to display the screen sh own next.
Prestige 660R-6xC Series User’s Guide Chapter 7 Network Address Translatio n (NAT) Screens 80 Table 19 Address Mapping Rule Edit LABEL DESCRIPTION Ty p e Choose the port mapping type from one of the following. • One-to-One : One-to-One mode maps one local IP address to o ne global IP address.
Prestige 660R-6xC Series User’s Guide 81 Chapter 7 Network Addre ss Translation (NAT) Screen s.
Prestige 660R-6xC Series User’s Guide Chapter 8 Dynamic DNS Setup 82 C HAPTER 8 Dynamic DNS Setup This chapter discusses how to configure your Prestige to use Dynamic DNS.
Prestige 660R-6xC Series User’s Guide 83 Chapter 8 Dynamic DNS Setup Figure 29 Dynamic DNS The following table describes the labels in this screen. Table 20 Dynamic DNS LABEL DESCRIPTION Active Select this check box to use dynamic DNS. Service Provider This is the name of your Dyn amic DNS service provide r .
Prestige 660R-6xC Series User’s Guide Chapter 9 Time and Date 84 C HAPTER 9 T ime and Date This screen is not available on all models. Us e this screen to configur e the Prestige’ s time and date settings. 9.1 Configuring T ime and Date T o change your Prestige’ s time and date, click Time And Date .
Prestige 660R-6xC Series User’s Guide 85 Chapter 9 Time and Date Table 21 T ime and Date LABEL DESCRIPTION T ime Server Use Protocol when Bootup Select the time service protocol that your time server sends w hen you turn on the Prestige.
Prestige 660R-6xC Series User’s Guide Chapter 10 Remote M anagement Configuration 86 C HAPTER 10 Remote Management Configuration This chapter provides information on config uring remote management.
Prestige 660R-6xC Series User’s Guide 87 Chapter 10 Remote Manag ement Configuration 10.1.2 Remote Management and NA T When NA T is enabled: • Use the Prestige’ s W A N IP address when configuring from the W AN. • Use the Prestige’ s LAN IP address when configurin g from the LAN.
Prestige 660R-6xC Series User’s Guide Chapter 10 Remote M anagement Configuration 88 Figure 32 Remote Manageme nt The following table describes the labels in this screen. Table 22 Remote Manageme n t LABEL DESCRIPTION Server T ype Each of these labels denotes a service that you ma y use to remotely manage the Prestige.
Prestige 660R-6xC Series User’s Guide 89 Chapter 10 Remote Manag ement Configuration.
Prestige 660R-6xC Series User’s Guide Chapter 11 Univers al Plug-and-Play (UPnP) 90 C HAPTER 11 Universal Plug-and-Play (UPnP) This chapter introduces the UPnP feature in the web configura tor .
Prestige 660R-6xC Series User’s Guide 91 Chapter 11 Univers al Plug-and-Play (UPnP) All UPnP-enabled devices may communicate freely with eac h other without additional configuration.
Prestige 660R-6xC Series User’s Guide Chapter 11 Univers al Plug-and-Play (UPnP) 92 1 1.3 Inst alling UPnP in Windows Example This section shows ho w to install UPnP in W indows Me and W indows XP . Inst alling UPnP in Windows Me Follow the steps below to inst all the UPnP in W indows Me.
Prestige 660R-6xC Series User’s Guide 93 Chapter 11 Univers al Plug-and-Play (UPnP) Figure 35 Add/Remove Programs: Windows Setup : Communication: Component s 4 Click OK to go back to the Add/Remove Pr ograms Properties window and click Next . 5 Restart the computer when prompted.
Prestige 660R-6xC Series User’s Guide Chapter 11 Univers al Plug-and-Play (UPnP) 94 Figure 37 Windows Op tional Networ king Compon ents Wizard 5 In the Networking Services window , select the Universal Plug and Play check box.
Prestige 660R-6xC Series User’s Guide 95 Chapter 11 Univers al Plug-and-Play (UPnP) Figure 38 Networking Servic es 6 Click OK to go back to the W indows Optional Networking Component W izard window and click Next . 1 1.4 Using UPnP in Windows XP Example This section shows yo u how to use the UPnP feature in Wi ndows XP .
Prestige 660R-6xC Series User’s Guide Chapter 11 Univers al Plug-and-Play (UPnP) 96 Figure 39 Network Connections 3 In the Internet Connection Properties window , click Settings to see the port mappings there were automatically created.
Prestige 660R-6xC Series User’s Guide 97 Chapter 11 Univers al Plug-and-Play (UPnP) Figure 40 Internet Co nnection Prop erties 4 Y ou may edit or delete the port mappings o r click Add to manually add port mappings.
Prestige 660R-6xC Series User’s Guide Chapter 11 Univers al Plug-and-Play (UPnP) 98 Figure 41 Internet Connection Properties: Advanced Settin gs Figure 42 Internet Connection Pr operties: Advanced Settings: Add 5 When the UP nP-enabled device is disconn ected from your computer , all port mappings will be deleted automatically .
Prestige 660R-6xC Series User’s Guide 99 Chapter 11 Univers al Plug-and-Play (UPnP) Figure 43 System T ray Icon 7 Double-click on the icon to display yo ur curr ent Internet co nnection status.
Prestige 660R-6xC Series User’s Guide Chapter 11 Universa l Plug-and-Play (UPnP) 100 Figure 45 Network Connections 4 An icon with the description for e ach UPnP-enabled device disp lays under Local Network . 5 Right-click on the icon for your Prestige and select Invoke .
Prestige 660R-6xC Series User’s Guide 101 Chapter 11 Univer sal Plug-and-Play (UPnP) Figure 46 Network Con nections: M y Network Places 6 Right-click on the icon for your Prestige and select Pr operties . A properties window displays with basic information about the Prestige.
Prestige 660R-6xC Series User’s Guide Chapter 11 Universa l Plug-and-Play (UPnP) 102 Figure 47 Network Conn ections: My N etwork Plac es: Properties: Example.
Prestige 660R-6xC Series User’s Guide 103 Chapter 11 Univer sal Plug-and-Play (UPnP).
Prestige 660R-6xC Series User’s Guide Chapter 12 Maintenance 104 C HAPTER 12 Maintenance This chapter displays system information such as ZyNOS firmware, port IP addresses and port traffic statistics.
Prestige 660R-6xC Series User’s Guide 105 Chapter 12 Maintenance Figure 48 System S tatus The following table describes the fields in this screen. Table 24 System S tatus LABEL DESCRIPTION System S tatus System Name This is the name of your Pre stige.
Prestige 660R-6xC Series User’s Guide Chapter 12 Maintenance 106 12.2.1 System St atistics Click Show S tatistics in the System S tatus scre en to open the following screen. Read-only information here includes port status and packet specific statistics.
Prestige 660R-6xC Series User’s Guide 107 Chapter 12 Maintenance The following table describes the labels in this screen. 12.3 DHCP T able Screen DHCP (Dynamic Host Configuration Protocol , RFC 2131 and RFC 2132) allows indiv idual clients to obtain TCP/IP configuration at star t-up from a server .
Prestige 660R-6xC Series User’s Guide Chapter 12 Maintenance 108 Figure 50 DHCP T able The following table describes the fields in this screen. 12.4 Diagnostic Screens These read-only screens display information to help you identify proble ms with the Prestige.
Prestige 660R-6xC Series User’s Guide 109 Chapter 12 Maintenance Figure 51 Diagnostic: Ge neral The following table describes the labels in this screen. 12.4.2 Diagnostic DSL Line Screen Click Diagnostic and then DSL Line to o pen the screen shown next.
Prestige 660R-6xC Series User’s Guide Chapter 12 Maintenance 110 Figure 52 Diagnostic: DSL Line The following table describes the labels in this screen. Table 28 Diagnostic: DSL Line LABEL DESCRIPTION Reset ADSL Line Click this button to reinitialize the ADSL line.
Prestige 660R-6xC Series User’s Guide 111 Chapter 12 Maintenance 12.5 Firmware Screen Find firmware at www .zyxel.com in a file that (usually) uses the system model name with a .bin extension, for example, "Prestige.bin" . The upload process uses HTTP (Hypertext T ransfer Protocol) and may take up to two minu tes.
Prestige 660R-6xC Series User’s Guide Chapter 12 Maintenance 112 After you see the Firmware Upload in Pr ocess screen, wait two minutes before logging into the Prestige again. The Prestige automatically restarts in this time causing a temporary networ k disconnect.
Prestige 660R-6xC Series User’s Guide 113 Chapter 12 Maintenance.
Prestige 660R-6xC Series User’s Guide Chapter 13 Intro ducing the SMT 114 C HAPTER 13 Introducing the SMT This chapter explains how to access and na viga te the System Management T erminal and gives an overview of its menus.
Prestige 660R-6xC Series User’s Guide 115 Chapter 13 In troducing the SMT Figure 56 Login Screen 13.1.3 Prestige SMT Menu Overview The following figure gives you an overview of the various SMT menu screens of you r Prestige. Figure 57 Prestige SMT Menu Ove rview 13.
Prestige 660R-6xC Series User’s Guide Chapter 13 Intro ducing the SMT 116 Several operations that you should be fam iliar with before you a ttempt to modify the configuration are listed in the table below .
Prestige 660R-6xC Series User’s Guide 117 Chapter 13 In troducing the SMT After you enter the password, the SMT di splays the main menu, as shown next. 13.2.1 System Manage ment T erminal Interface Summary Table 31 SMT Main Menu Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
Prestige 660R-6xC Series User’s Guide Chapter 13 Intro ducing the SMT 118 13.3 Changing the System Password Change the P restige defau lt password by following the steps shown next. 1 Enter 23 in the main menu to display Menu 23 - System Password as shown next.
Prestige 660R-6xC Series User’s Guide 119 Chapter 13 In troducing the SMT.
Prestige 660R-6xC Series User’s Guide Chapter 14 Menu 1 General Setup 120 C HAPTER 14 Menu 1 General Setup Menu 1 - General Setup contains administra tive an d system-related information. 14.1 General Setup Menu 1 — General Setup contains administrative and system-related information (shown next).
Prestige 660R-6xC Series User’s Guide 121 Chapter 14 Menu 1 General Setup Figure 59 Menu 1 General Setup Fill in the required fields. Refer to the tabl e shown next for more information about these fields.
Prestige 660R-6xC Series User’s Guide Chapter 14 Menu 1 General Setup 122 T o configure dy namic DNS, go to Menu 1 — General Setup and select Ye s in the Edit Dynamic DNS field. Press [ ENTER ] to display Menu 1.1— Configur e Dynamic DNS as shown next.
Prestige 660R-6xC Series User’s Guide 123 Chapter 14 Menu 1 General Setup.
Prestige 660R-6xC Series User’s Guide Chapter 15 Menu 2 WAN Backup Setup 124 C HAPTER 15 Menu 2 W AN Backup Setup This chapter describes how to configure traffic redirect using menu 2 and 2.1. 15.1 Introduction to W AN Backup Setup This chapter explains how to configure the Pr estige for traf fic redirect and dial backup connections.
Prestige 660R-6xC Series User’s Guide 125 Chapter 15 Menu 2 WAN Backup Setup Figure 61 Menu 2 W AN Backup Setup The following table describes the fields in this menu. Menu 2 - Wan Backup Setup Check Mechanis m = DSL Link Check WAN IP A ddress1 = 0.0.
Prestige 660R-6xC Series User’s Guide Chapter 15 Menu 2 WAN Backup Setup 126 15.2.1 T raffic Redirect Setup Configure parameters that determine when th e Prestige will forward W AN traffic to the backup gateway using Menu 2.1 — T raffic Redir ect Setup .
Prestige 660R-6xC Series User’s Guide 127 Chapter 15 Menu 2 WAN Backup Setup.
Prestige 660R-6xC Series User’s Guide Chapter 16 Menu 3 LAN Setup 128 C HAPTER 16 Menu 3 LAN Setup This chapter covers how to configure your wired Local Area Network (LAN) settings. 16.1 LAN Setup This section describes how to configure the Ethernet using Menu 3 — LAN Setup .
Prestige 660R-6xC Series User’s Guide 129 C hapter 16 Men u 3 LAN Setup 16.2 Protocol Dependent Ethernet Setup Depending on the proto cols for your applications, you need to co nfigure the respectiv e Ethernet Setup, as outlined below . • For TCP/IP Ethernet setup refer to the Internet Access Configuration section .
Prestige 660R-6xC Series User’s Guide Chapter 16 Menu 3 LAN Setup 130 Follow the instructions in the following table on how to configure th e DHCP fields. Follow the instructions in the following tabl e to configure TCP/IP parameters for the Ethernet port.
Prestige 660R-6xC Series User’s Guide 131 C hapter 16 Men u 3 LAN Setup.
Prestige 660R-6xC Series User’s Guide Chapter 17 Internet Access 132 C HAPTER 17 Internet Access This chapter shows you how to configure the LAN and W AN of your Prestige for Internet access .
Prestige 660R-6xC Series User’s Guide 133 Chapter 17 Internet Access Figure 66 IP Alias Network Example Use menu 3.2.1 to co nfigure IP Alias on your Prestige.
Prestige 660R-6xC Series User’s Guide Chapter 17 Internet Access 134 Figure 68 Menu 3.2.1 IP Alias Setup Follow the instructions in the following table to configure IP Alias parameters. 17.5 Route IP Setup The first step is to en able the IP routing in Menu 1 - General Setup .
Prestige 660R-6xC Series User’s Guide 135 Chapter 17 Internet Access Figure 69 Menu 1 General Setup 17.6 Internet Access Configuration Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified setup for one of t he remote nodes that you can access in menu 1 1 .
Prestige 660R-6xC Series User’s Guide Chapter 17 Internet Access 136 Figure 70 Menu 4 Internet Access Setup The following table contains instructions on how to configure your Prestige for Internet access.
Prestige 660R-6xC Series User’s Guide 137 Chapter 17 Internet Access If all your settings are correct, your Prestige shoul d connect automatical ly to the Internet. If the connection fails, note the error message th at you receive on the screen and take the appropriate troubleshooting steps.
Prestige 660R-6xC Series User’s Guide Chapter 18 Remot e Node Configur ation 138 C HAPTER 18 Remote Node Configuration This chapter covers remo te node configuration. 18.1 Remote Node Setup Overview This section describes the protocol-independent parameters for a remote node.
Prestige 660R-6xC Series User’s Guide 139 Chap ter 18 Remote Node Configuratio n Figure 71 Menu 1 1 Remote Node Setup 18.2.2 Encap sulation and Multiplexing Scenarios For Internet access you should use the encapsulation and multiple xing methods used by your ISP .
Prestige 660R-6xC Series User’s Guide Chapter 18 Remot e Node Configur ation 140 Figure 72 Menu 1 1.1 Remote Node Profile In Menu 1 1 .1 – Remote Node Profile , fill in the fields as de scrib ed in the following table.
Prestige 660R-6xC Series User’s Guide 141 Chap ter 18 Remote Node Configuratio n 18.2.3 Outgoing Au thentication Protocol For obvious reasons, you sho uld employ the strongest authentication protocol possible. However , some vendors’ implementation includ es specific authentication protocol in the user profile.
Prestige 660R-6xC Series User’s Guide Chapter 18 Remot e Node Configur ation 142 18.3 Remote Node Network Layer Options For the TCP/IP parameters, perf orm the following steps to edit Menu 1 1.3 – Remote Node Network Layer Options as shown next. 1 In menu 1 1.
Prestige 660R-6xC Series User’s Guide 143 Chap ter 18 Remote Node Configuratio n 18.3.1 My W AN Addr Sample IP Addresses The following figure uses sample IP addresses to help you understand the field of My W AN Addr in menu 1 1.3. Refer to the previous Figure 15 in Chapter 5 LAN Setup for a brief review of what a W AN IP is.
Prestige 660R-6xC Series User’s Guide Chapter 18 Remot e Node Configur ation 144 Figure 74 Sample IP Addresses for a TC P/IP LAN-to-LAN Connection 18.4 Remote Node Filter Move the cu rs or to the Edit Filter Sets field in menu 1 1 .1, then press [SP ACE BAR] to select Ye s .
Prestige 660R-6xC Series User’s Guide 145 Chap ter 18 Remote Node Configuratio n Figure 76 Menu 1 1.5 Remote Node Filter (PP PoA or PPPoE Encapsulation) 18.4.1 We b Configurator Inte rnet Security Filter Rules In the web configurator , open th e Security screen as shown next .
Prestige 660R-6xC Series User’s Guide Chapter 18 Remot e Node Configur ation 146 18.4.2 We b Configurator Filter Sets When you apply filter rules using the web config urator , filter sets 11 and 12 are automatically generated in SMT menu 21 . This feat ure is not available on all models.
Prestige 660R-6xC Series User’s Guide 147 Chap ter 18 Remote Node Configuratio n Figure 79 Menu 21.1 1 WebSet 1 1 Figure 80 Menu 21.12 WebSet 12 18.5 Editing A TM Layer Options Follow the steps shown next to edit Menu 1 1.6 – Remote Node A TM Layer Options .
Prestige 660R-6xC Series User’s Guide Chapter 18 Remot e Node Configur ation 148 18.5.1 VC-based Multiplexi ng (non-PPP Encap sulation) For VC-based multiplexing, by prior agreement, a prot ocol is assigned a specific virtual circuit, for example, VC1 will carry IP .
Prestige 660R-6xC Series User’s Guide 149 Chap ter 18 Remote Node Configuratio n Figure 83 Menu 1 1.1 Remote Node Profile Move the cursor to the Edit Advance Options field, press [SP ACE BAR] to select Ye s , then press [ENTER] to display Menu 1 1.8 – Advance Setup Options .
Prestige 660R-6xC Series User’s Guide Chapter 19 Static Route Setup 150 C HAPTER 19 S t atic Route Setup This chapter shows how to setup IP static routes. 19.1 IP S tatic Route Overview Stat ic routes tell the Prestige ro uting information that it cann ot learn automatically through other means.
Prestige 660R-6xC Series User’s Guide 151 Chapter 19 Static Route Setup Figure 86 Menu 12 S tatic Route Setup 2 From menu 12, select 1 to open Menu 12.1 — IP S tatic Route Setup (shown next). Figure 87 Menu 12.1 IP S tatic Route Setup 3 Now , type the route number of a st atic route you want to configure.
Prestige 660R-6xC Series User’s Guide Chapter 19 Static Route Setup 152 The following table describes the fields for Menu 12.1.1 – Edit IP S tatic Route Setup . Table 44 Menu12.1.1 Edit IP S tatic Route FIELD DESCRIPTION Route # This is the index number of the static route that you chose in menu 12.
Prestige 660R-6xC Series User’s Guide 153 Chapter 19 Static Route Setup.
Prestige 660R-6xC Series User’s Guide Chapter 20 Bridgin g Setup 154 C HAPTER 20 Bridging Setup This chapter shows you how to configure the bridgin g parameters of your Prestige.
Prestige 660R-6xC Series User’s Guide 155 Chapter 20 Bridging Setup Figure 89 Menu 1 1.1 Remote Node Profile 3 Move the cursor to the Edit IP/Bridge field, then press [ SP ACE BAR ] to set the value to Ye s a nd press [E NTER] to edit Menu 1 1.3 – Remote Node Network Layer Options .
Prestige 660R-6xC Series User’s Guide Chapter 20 Bridgin g Setup 156 20.2.2 Bridge St atic Route Setup Similar to network layer static routes, a bridging static route tells the Prestige the route to a node before a conn ection is established. Y ou c onfigure b ridge static routes in menu 12.
Prestige 660R-6xC Series User’s Guide 157 Chapter 20 Bridging Setup.
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 158 C HAPTER 21 Network Address T ranslation (NA T) This chapter discusses how to configure NA T on the Prestige.
Prestige 660R-6xC Series User’s Guide 159 Chapter 21 Network Address Transla tion (NAT) Figure 92 Menu 4 Applying NA T for Internet Access The following figure shows how you apply NA T to the remote node in menu 1 1.1. 1 Enter 1 1 from the main menu.
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 160 21.3 NA T Setup Use the address mapping sets me nus and submenus to create the mapping table used to assign global addresses to computers on the LAN. Set 255 is used for SUA.
Prestige 660R-6xC Series User’s Guide 161 Chapter 21 Network Address Transla tion (NAT) Figure 95 Menu 15.1 Address Ma pping Sets 21.3.1.1 SUA Address Mapping Set Enter 255 to display th e next screen (see also the SUA (Single User Account) V ersus NA T section ).
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 162 21.3.1.2 User-Defined Address Mapping Set s Now let’ s look at option 1 in menu 15.1. En ter 1 to bring up this menu. W e’ll just look at the differences from the previous menu.
Prestige 660R-6xC Series User’s Guide 163 Chapter 21 Network Address Transla tion (NAT) 21.3.1.3 Ordering Y our Rules Ordering your rules is important because the Pr estige applies the rules in the order that you specify . When a rule matches the c urrent pack et, the Prestige take s the corresponding action and the remaining rules are ignored.
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 164 Figure 98 Menu 15.1.1. 1 Editing/Config uring an Individu al Rule in a Set The following table explains the fields in t his menu. Table 50 Menu 15.1.1.1 Edit ing/Config uring an Individu al Rule in a Set 21.
Prestige 660R-6xC Series User’s Guide 165 Chapter 21 Network Address Transla tion (NAT) Figure 99 Menu 15.2 NA T Server Setup 3 Enter 1 to go to Menu 15.2.1 NA T Server Setup as follows. Figure 100 Menu 15.2.1 NA T Server Setup 4 Enter a port number in an unused St a r t P o r t N o field.
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 166 Figure 101 Multiple Servers Behind NA T Example 21.5 General NA T Examples The following are some exam ples of NA T configuration.
Prestige 660R-6xC Series User’s Guide 167 Chapter 21 Network Address Transla tion (NAT) Figure 103 Menu 4 Internet Access & NA T Example From menu 4, choose the SUA Only option from the Network Address T ranslation field. This is the Many-to-One mapping discussed in the General NA T Examples section .
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 168 Figure 105 Menu 15.2.1 Specifying an Inside Server 21.5.3 Example 3: Multiple Public IP Addresses With Inside Servers In this example, there are 3 IGAs from our IS P .
Prestige 660R-6xC Series User’s Guide 169 Chapter 21 Network Address Transla tion (NAT) Figure 106 NA T Examp le 3 In this case you need to configure Address Mapping Set 1 from M enu 15.1 - Addr ess Mapping Sets . Therefore you must choose the Full Feature option from the Network Address T ranslation field (in menu 4 or menu 1 1.
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 170 Figure 108 Example 3: Menu 15.1.1.1 Figure 109 Example 3: Final Menu 15.1.1 Now configure the IGA3 to map to our web server and mail server on the LAN. 1 Enter 15 from the main menu.
Prestige 660R-6xC Series User’s Guide 171 Chapter 21 Network Address Transla tion (NAT) Figure 1 10 Example 3: Menu 15.2.1 21.5.4 Example 4: NA T Unfr iendly Application Programs Some applications do not support NA T Mapping using TCP or UDP port address translation.
Prestige 660R-6xC Series User’s Guide Chapter 21 Network Address Translation (NAT) 172 Figure 1 12 Example 4: Menu 15.1.1.1 Address Ma pping Rule After you’ve configured your rule , you should be able to check the settings in menu 15.1.1 as shown next.
Prestige 660R-6xC Series User’s Guide 173 Chapter 21 Network Address Transla tion (NAT).
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 174 C HAPTER 22 Filter Configuration This chapter shows you how to create and apply filters. 22.1 About Filtering Y our Prestige uses filters to decide whether or no t to allow passage of a data packet and/or to make a call.
Prestige 660R-6xC Series User’s Guide 175 Chapter 22 Filter Configuration Figure 1 15 Filter Rule Process Y ou can apply up to four filter sets to a partic ular port to block various types of packets. Because each filter set can have up to six rules, you can have a maximum of 24 rules active for a single port.
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 176 22.2 Configuring a Filter Set for the Prestige T o configure a filter set, follow the steps shown next. 1 Enter 21 in the main menu to display Menu 21 – Filter Set Configuration as shown next.
Prestige 660R-6xC Series User’s Guide 177 Chapter 22 Filter Configuration Figure 1 18 NetBIOS_LAN Filter Rules Summary 22.3 Filter Rules Summary Menus The following tables briefly descri be the abbreviations used in menus 21.1.1 and 21.1.2. Menu 21.
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 178 The protocol dependent filter rules abbreviation are listed as follows: 22.4 Configuring a Filter Rule T o configure a filter rule, type its number in Menu 21.x – Filter Ru les Summary and press [ENTER] to open menu 21.
Prestige 660R-6xC Series User’s Guide 179 Chapter 22 Filter Configuration Figure 1 19 Menu 21.x.1 TCP/IP Filter Rule The following table describes how to co nfigure your TCP/IP filter rule.
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 180 The following figure illustrates th e logic flow of an IP filter. Port # T ype the source port of the packets you want to filter . The range of this field is 0 to 65535. A 0 field i s ignored.
Prestige 660R-6xC Series User’s Guide 181 Chapter 22 Filter Configuration Figure 120 Executing an IP Filter 22.4.2 Generic Filter Rule This section shows you how to co nfigure a generic filter rule. The purpose of generic rules is to allow you to filter non-IP packets.
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 182 T o configure a generic rule select an empty filter set in menu 21, for example 5. Select Generic Filter Rule in the Filter T ype field and press [ENTER] to open Menu 21.5.1 – Generic Filter Rule , as shown in th e following figure.
Prestige 660R-6xC Series User’s Guide 183 Chapter 22 Filter Configuration 22.5 Filter T ypes and NA T There are two classes of filter rules, Generic Filter Device rules and Protocol Filter ( TCP/IP ) rules. Generic Filter rules act on the raw data from/ to LAN and W AN.
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 184 Figure 123 Sample T elnet Filter 1 Enter 21 in the main menu to display Menu 21 — Filter Set Configuration . 2 Enter the index number of th e filter set you want to configure (in this case 6) .
Prestige 660R-6xC Series User’s Guide 185 Chapter 22 Filter Configuration Figure 124 Menu 21.6.1 Sample Filter Figure 125 Menu 21.6.1 Sample F ilter Rules Summary This shows you that you have configured and activated ( A = Y ) a TCP/IP filter rule ( Ty p e = IP , Pr = 6 ) for destination telnet ports ( DP = 23 ).
Prestige 660R-6xC Series User’s Guide Chapter 22 Filter Configuration 186 22.7 Applying Filters and Factory Default s This section shows you wh ere to apply the filter(s) after you design it (them). Sets of factory default filter rules have been configured in me nu 21 (but have not been applied) to filter traffic.
Prestige 660R-6xC Series User’s Guide 187 Chapter 22 Filter Configuration Figure 127 Filtering Remote Node T raffic Note that call filter sets are visible when you select PPPoA or PPPoE encapsulation.
Prestige 660R-6xC Series User’s Guide Chapter 23 SNMP Configuration 188 C HAPTER 23 SNMP Configuration This chapter explains SNMP Configuration menu 22. 23.1 About SNMP Simple Network Management Protocol (SNM P) i s a protocol u sed for exchanging management information b etween network devices.
Prestige 660R-6xC Series User’s Guide 189 Chapter 23 SNMP Configuration The managed devices cont ain object variables/ managed objects that define each piece of information to be collected ab out a device. Examples of vari ables include the number of packets received, node port status etc.
Prestige 660R-6xC Series User’s Guide Chapter 23 SNMP Configuration 190 The following table describes the SNMP configuration parameters. 23.4 SNMP T rap s The Prestige will send traps to the SNMP ma.
Prestige 660R-6xC Series User’s Guide 191 Chapter 23 SNMP Configuration The port number is its interface index under the interface group. Table 58 Port s and Permanent Vi rtual Circuit s PORT PVC (P.
Prestige 660R-6xC Series User’s Guide Chapter 24 System Inform ation and Diagnosis 192 C HAPTER 24 System Information and Diagnosis This chapter covers the information and diag nostic tools in SMT menus 24.
Prestige 660R-6xC Series User’s Guide 193 Chapter 24 System Information and Diagnosis The following table describes the fields present in Menu 24.1 — System Maintenance — St a t u s which are read-only and meant for diagnostic purposes. Figure 131 Menu 24.
Prestige 660R-6xC Series User’s Guide Chapter 24 System Inform ation and Diagnosis 194 24.3 System Information T o get to the System Information: 1 Enter 24 to display Menu 24 — System Maintenance . 2 Enter 2 to display Menu 24.2 — System Inform ation and Console Port Speed .
Prestige 660R-6xC Series User’s Guide 195 Chapter 24 System Information and Diagnosis Figure 133 Menu 24.2.1 System Maintenance: In formation The following table describes the fields in this menu. 24.3.2 Console Port Speed Y ou can set up different port speeds for the console port through Menu 24.
Prestige 660R-6xC Series User’s Guide Chapter 24 System Inform ation and Diagnosis 196 Figure 134 Menu 24.2.2 System Maintenance : Chang e Console Port Speed 24.4 Log and T race There are two logging faci lities in the Prestige. The first is the error logs and trace records that are stored locally .
Prestige 660R-6xC Series User’s Guide 197 Chapter 24 System Information and Diagnosis Figure 136 Sample Error an d Informat ion Messages 24.4.2 Syslog and Accounting The Prestige uses the syslog fa cility to log the CDR (Call Deta il Record) and system messages to a syslog server.
Prestige 660R-6xC Series User’s Guide Chapter 24 System Inform ation and Diagnosis 198 The following are examples of the four typ es of syslog messages sent by the Prestige: Packet T ri ggered The first 48 bytes or octets and protocol ty pe of the triggering packet is sent to the UNIX syslog server when this field is set to Ye s .
Prestige 660R-6xC Series User’s Guide 199 Chapter 24 System Information and Diagnosis 24.5 Diagnostic The diagnostic facility allows you to test the di f ferent aspects of your Prestige to determine if it is working properly .
Prestige 660R-6xC Series User’s Guide Chapter 24 System Inform ation and Diagnosis 200 Figure 139 Menu 24.4 System Maintenance : Diagnostic The following table describes the diagnostic tests available in menu 24.4 for and the connections. Menu 24.4 - System Maintenance - Dia gnostic xDSL System 1.
Prestige 660R-6xC Series User’s Guide 201 Chapter 24 System Information and Diagnosis.
Prestige 660R-6xC Series User’s Guide Chapter 25 Firmware and Confi guration File Maintenance 202 C HAPTER 25 Firmware and Configuration File Maintenance This chapter tells y ou how to backup and restor e your configuration file as well as upload new firmware and configuration files.
Prestige 660R-6xC Series User’s Guide 203 Chapter 25 Firmware and Con f iguration File Main tenance The following table is a summary . Please note that the internal filename refe rs to the filename .
Prestige 660R-6xC Series User’s Guide Chapter 25 Firmware and Confi guration File Maintenance 204 Figure 140 T elnet in Menu 24.5 25.2.2 Using the FTP Command from the Comman d Line 1 Launch the FTP client on your computer . 2 Enter “ open ”, followed by a space and the IP address of your Prestige.
Prestige 660R-6xC Series User’s Guide 205 Chapter 25 Firmware and Con f iguration File Main tenance Figure 141 FTP Session Example 25.2.4 GUI-based FTP Clients The following table describes some of the commands that you may see in GUI-based FTP clients.
Prestige 660R-6xC Series User’s Guide Chapter 25 Firmware and Confi guration File Maintenance 206 25.2.6 Backup Configuration Using TFTP The Prestige support s the up/downloading of the firmware and the configuration file using TFTP (T rivial File T ransfer Protocol) over LA N.
Prestige 660R-6xC Series User’s Guide 207 Chapter 25 Firmware and Con f iguration File Main tenance Refer to the TFTP and FTP over W A N Management Limitations section to r e ad about configurations that disallow TFTP and FTP over W AN. 25.3 Restore Configuration This section shows you how to restore a previ ously saved configuration.
Prestige 660R-6xC Series User’s Guide Chapter 25 Firmware and Confi guration File Maintenance 208 Figure 142 T elnet into Menu 24.6 1 Launch the FTP client on your computer . 2 Enter “ open ”, followed by a space and the IP address of your Prestige.
Prestige 660R-6xC Series User’s Guide 209 Chapter 25 Firmware and Con f iguration File Main tenance 25.4 Uploading Firmware and Configuration Files This section shows yo u how to upload firmware and co nfiguration files.
Prestige 660R-6xC Series User’s Guide Chapter 25 Firmware and Confi guration File Maintenance 210 Figure 145 T elnet Into Menu 24.7.2 System Maintenance T o upload the firmware and the configuration file, follow these examples 25.4.3 FTP File Upload Comman d from the DOS Prompt Example 1 Launch the FTP client on your computer .
Prestige 660R-6xC Series User’s Guide 211 Chapter 25 Firmware and Con f iguration File Main tenance 25.4.4 FTP Session Exampl e of Firmware File Upload Figure 146 FTP Session Example of Firmware File Upload More commands (found in GUI-based FTP clie nts) are listed earlier in this chapter .
Prestige 660R-6xC Series User’s Guide Chapter 25 Firmware and Confi guration File Maintenance 212 25.4.6 TFTP Upload Command Example The following is an example TFTP command: tftp [-i] host put firmware.
Prestige 660R-6xC Series User’s Guide 213 Chapter 25 Firmware and Con f iguration File Main tenance.
Prestige 660R-6xC Series User’s Guide Chapter 26 System Maintenance 214 C HAPTER 26 System Maintenance This chapter leads you through SM T menus 24.8 to 24.10. 26.1 Command Interpreter Mode The Command Interpreter (CI) is a part of the ma in system firmware.
Prestige 660R-6xC Series User’s Guide 215 Chapter 26 System M aintenance 26.2 Call Control Support Call Control Support is only applicable when Encapsulation is set to PPPoE in menu 4 or menu 1 1 .1. The budget management func tion allows you to set a limit on the total outgoing call time of the Prestige within certain times.
Prestige 660R-6xC Series User’s Guide Chapter 26 System Maintenance 216 Figure 150 Menu 24.9.1 System Maintenance: Budg et Management The total budget is the time li mit on the accumulated time for ou tgoing calls to a remo te node.
Prestige 660R-6xC Series User’s Guide 217 Chapter 26 System M aintenance Figure 151 Menu 24 System Maintenance Then enter 10 to go to Menu 24.10 System Maintena nce Time and Date Setting to update the time and date settings of your Pres tige as shown in th e following screen.
Prestige 660R-6xC Series User’s Guide Chapter 26 System Maintenance 218 Figure 152 Menu 24.10 System Maintenance : T ime and Date Setting 26.3.1 Resetting the T ime Menu 24.
Prestige 660R-6xC Series User’s Guide 219 Chapter 26 System M aintenance The Prestige resets the time in three instances: • On leaving menu 24.10 after making changes. • When the Prestige starts up, if there is a timeserver co nfigured in menu 24.
Prestige 660R-6xC Series User’s Guide Chapter 27 Remo te Management 220 C HAPTER 27 Remote Management This chapter covers remote ma nagement (SMT menu 24.1 1). 27.1 Remote Management Overview Remote management allows you to determ ine which services/protocols can access which Prestige interface (if any) from which computers.
Prestige 660R-6xC Series User’s Guide 221 Chapter 27 Remote Manag ement Figure 153 Menu 24.1 1 Remote M anagemen t Control The following table describes the fields in this menu. 27.2.2 Remote Management Limit ations Remote management over LAN or W AN will not work when: • A filter in menu 3.
Prestige 660R-6xC Series User’s Guide Chapter 27 Remo te Management 222 27.3 Remote Management and NA T When NA T is enabled: • Use the Prestige’ s W A N IP address when configuring from the W AN. • Use the Prestige’ s LAN IP address when configurin g from the LAN.
Prestige 660R-6xC Series User’s Guide 223 Chapter 27 Remote Manag ement.
Prestige 660R-6xC Series User’s Guide Chapter 28 IP Policy Routing 224 C HAPTER 28 IP Policy Routing This chapter covers setting and appl ying policies used for IP routing. 28.1 IP Policy Routing Overview T raditionally , routing is based on the destinatio n address only and the IAD takes the shortest path to forward a packet.
Prestige 660R-6xC Series User’s Guide 225 Chapter 28 IP Policy Routing • routing the packet to a different gate way (and hence the outgoing interface). • setting the TO S and precedence fields in the IP header . IPPR follows the existing packet filtering facility of RAS in st yle and in impl ementation.
Prestige 660R-6xC Series User’s Guide Chapter 28 IP Policy Routing 226 Figure 155 Menu 25.1 IP Routing Po licy Setup Table 69 Menu 25.1 IP Routing Policy Setup T ype a number from 1 to 6 to display Menu 25.1.1 – IP Rou ting Policy (see the next figure).
Prestige 660R-6xC Series User’s Guide 227 Chapter 28 IP Policy Routing Figure 156 Menu 25.1.1 IP Routing Policy The following table describes the fields in this menu.
Prestige 660R-6xC Series User’s Guide Chapter 28 IP Policy Routing 228 28.5 Applying an IP Policy This section shows yo u where to apply the IP policies after you design them. 28.5.1 Ethernet IP Policies From Menu 3 — Ethernet Setup , type 2 to go to Menu 3.
Prestige 660R-6xC Series User’s Guide 229 Chapter 28 IP Policy Routing Figure 157 Menu 3.2 TCP/IP and DHCP Ethernet Se tup Go to menu 1 1.3 (shown next) and type the number(s) of the IP Rout ing Policy set(s) as appropriate. Y ou can ca scade up to four polic y sets by typing their numbers separated by commas.
Prestige 660R-6xC Series User’s Guide Chapter 28 IP Policy Routing 230 Route 1 represents the default IP route and route 2 represents the configured IP route. Figure 159 Example of IP Policy Routing T o force packets coming from clients with IP addresses of 192.
Prestige 660R-6xC Series User’s Guide 231 Chapter 28 IP Policy Routing 3 Check Menu 25.1 — IP Routing Policy S e tup to see if the rule is added correctly . 4 Create another policy set in menu 25. 5 Create a rule in menu 25.1 for this set to route packets from any host ( IP=0.
Prestige 660R-6xC Series User’s Guide Chapter 28 IP Policy Routing 232 Figure 162 Applying IP Policies Example Menu 3.2 - TCP/IP and DHCP Ethernet Setup DHCP Setup DHCP= Server Client IP Pool Starting Addre ss= 192.168.1.33 Size of Client IP Pool= 64 Primary DNS Server= 0.
Prestige 660R-6xC Series User’s Guide 233 Chapter 28 IP Policy Routing.
Prestige 660R-6xC Series User’s Guide Chapter 29 Call Scheduling 234 C HAPTER 29 Call Scheduling Call scheduling (applicable for PPPoA or PPPoE encapsulati on only) allows you to dictate when a remote node sho uld be called and for how long.
Prestige 660R-6xC Series User’s Guide 235 Chapter 29 Call Scheduling T o setup a schedule set, select the schedule set you want to setup from menu 26 (1-12) and press [ENTER] to see Menu 26.1 — Schedule Set Setup as shown next. Figure 164 Menu 26.
Prestige 660R-6xC Series User’s Guide Chapter 29 Call Scheduling 236 Once your schedule sets are conf igured , you must then apply them to the desired remote node(s).
Prestige 660R-6xC Series User’s Guide 237 Chapter 29 Call Scheduling.
Prestige 660R-6xC Series User’s Guide Chapter 30 Troubleshooting 238 C HAPTER 30 T roubleshooting This chapter covers potential proble ms and the corresponding remedies.
Prestige 660R-6xC Series User’s Guide 239 Chapter 30 Troublesh ooting 30.3 Problems with the DSL LED 30.4 Problems with the LAN Interface 30.5 Problems with the W AN Interface Table 74 Troubleshootin g the DSL LED PROBLEM CORRECTIVE ACTION The DSL LED is off.
Prestige 660R-6xC Series User’s Guide Chapter 30 Troubleshooting 240 30.6 Problems with Internet Access 30.7 Problems with the Password Table 77 Troubleshooting Inter net Access PROBLEM CORRECTIVE ACTION I cannot access the Intern et. Make sure the Prestige is turned on and connected to the network.
Prestige 660R-6xC Series User’s Guide 241 Chapter 30 Troublesh ooting 30.8 Problems with the W eb Configurator 30.9 Problems with Remote Management Table 79 Troubleshootin g the Web Configurator PROBLEM CORRECTIVE ACTION I cannot access the web configurator .
Prestige 660R-6xC Series User’s Guide Appendix A Sp litters and M icrofilters 242 Appendix A Splitters and Microfilters This appendix tells you how to install a POTS splitter or a telephone microfilter . Connecting a POTS Splitter When you use the Full Rate (G .
Prestige 660R-6xC Series User’s Guide 243 Appen dix A Splitters and Microfilters 1 Connect a phone cable from the wall jack to the single jack end of the Y - Connector . 2 Connect a cable from the double jack end of the Y -Connector to th e “wall side” of the microfilter .
Prestige 660R-6xC Series User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 244 Appendix B Setting up Y our Computer ’ s IP Address All computers must have a 10M or 100M Et hernet adapter card and TCP/IP installed.
Prestige 660R-6xC Series User’s Guide 245 Appendix B Setting up Your Computer’s IP Add ress Figure 169 WIndows 95/98 /Me: Networ k: Configura tion Inst alling Component s The Network window Configuration tab displays a list of installed components.
Prestige 660R-6xC Series User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 246 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click OK . 5 Restart your computer so the changes you made take ef fect.
Prestige 660R-6xC Series User’s Guide 247 Appendix B Setting up Your Computer’s IP Add ress Figure 171 Windows 95/98/Me : TCP/IP Pr operties: DNS Configuration 4 Click the Gateway tab. • If you do not know your gateway’ s IP address, remove previously installed gateways.
Prestige 660R-6xC Series User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 248 Figure 172 Windows XP: S tar t Menu 2 For W indows XP , click Network Connections . For W indows 2000/NT , click Network and Dial-up Connections . Figure 173 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Pr operties .
Prestige 660R-6xC Series User’s Guide 249 Appendix B Setting up Your Computer’s IP Add ress Figure 174 Windows XP: Control Panel: Network Connections: Pro perties 4 Select Internet Protocol (TCP/IP) (under the Genera l tab in W in XP) and click Properties .
Prestige 660R-6xC Series User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 250 • If you have a static IP address click Use the following IP Address and fill in the IP addr ess , Subnet mask , and Default gateway fields. Click Advanced .
Prestige 660R-6xC Series User’s Guide 251 Appendix B Setting up Your Computer’s IP Add ress • Click Obtain DNS server address automatically if you do not know your DNS server IP addre ss(es).
Prestige 660R-6xC Series User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 252 Figure 178 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list. Figure 179 Macintosh O S 8/9: TC P/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configur e: list.
Prestige 660R-6xC Series User’s Guide 253 Appendix B Setting up Your Computer’s IP Add ress 4 For statically assigned settings, do the following: •F r o m t h e Configure box, select Manually . • T ype your IP address in the IP Address box. • T ype your subnet mask in the Subnet mask box.
Prestige 660R-6xC Series User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 254 Figure 181 Macintosh O S X: Netw ork 4 For statically assigned settings, do the following: •F r o m t h e Configure box, select Manually . • T ype your IP address in the IP Address box.
Prestige 660R-6xC Series User’s Guide 255 Appendix B Setting up Your Computer’s IP Add ress.
Prestige 660R-6xC Series User’s Guide Appendix C IP Subnetting 256 Appendix C IP Subnetting IP Addressing Routers “route” based on the network number .
Prestige 660R-6xC Series User’s Guide 257 Appendix C IP Subnettin g Since the first octet of a class “A” IP address must contain a “0”, the first octet of a class “A” address can have a valu e of 0 to 127.
Prestige 660R-6xC Series User’s Guide Appendix C IP Subnetting 258 Since the mask is always a continuous number of ones begin ning from the left, fo llowed by a continuous number of zeros for the remainder of the 32 bit mask, you can si mply specify the number of ones instead of writing the value of each octet.
Prestige 660R-6xC Series User’s Guide 259 Appendix C IP Subnettin g Divide the network 192.168.1. 0 into two separate subnets by converting one of th e host ID bits of the IP address to a network number bit. The “ borrowed” host ID bit can be either “0” or “1” thus giving two subnets; 19 2.
Prestige 660R-6xC Series User’s Guide Appendix C IP Subnetting 260 Example: Four Subnet s The above exampl e illustrated using a 25-bit subne t mask to divide a class “C” address space into two subnets.
Prestige 660R-6xC Series User’s Guide 261 Appendix C IP Subnettin g Example Eight Subnet s Similarly use a 27-bit mask to create 8 subnets (001 , 010, 01 1, 100, 101, 1 10). The following table shows class C IP ad dress last octet values for each subnet.
Prestige 660R-6xC Series User’s Guide Appendix C IP Subnetting 262 Subnetting With Class A and Class B Networks. For class “A” and class “B” addresses the subnet ma sk also determines which bits are part of the network number and which are part of the host ID.
Prestige 660R-6xC Series User’s Guide 263 Appendix C IP Subnettin g.
Prestige 660R-6xC Series User’s Guide Appendix D PPP oE 264 Appendix D PPPoE PPPoE in Action An ADSL modem bridges a PPP session over Ethernet (PPP ov er Ethernet, RFC 2516) from your computer to an A TM PVC (Permanent V irt ual Circuit) whic h connects to a DSL Access Concentrator where th e PPP session terminates ( see Figure 182 ).
Prestige 660R-6xC Series User’s Guide 265 Appendix D PPPoE Figure 182 Single-Compute r per Router Hardwa re Configuration How PPPoE W orks The PPPoE driver makes the Ethernet appea r as a serial link to the computer and the computer runs PPP over it, while the modem bridges the Ethernet frames to the Access Concentrator (AC).
Prestige 660R-6xC Series User’s Guide Appendix E Virtual Circuit Topology 266 Appendix E V irtual Circuit T opology A TM is a connection-oriented te chnology , meaning that it sets up virtual circuits over which end systems communi cate.
Prestige 660R-6xC Series User’s Guide 267 Appendix E.
Prestige 660R-6xC Series User’s Guide Appendix F 268 Appendix F Command Interpreter The following describes how to use the comman d interpreter . Enter 24 in the main menu to bring up the system maintena nce menu. Enter 8 to go to Menu 24.8 - Command Interpr e ter Mode .
Prestige 660R-6xC Series User’s Guide 269 Appendix F.
Prestige 660R-6xC Series User’s Guide Appendix G 270 Appendix G Log Descriptions This appendix provides descrip tions of example log messages. Table 95 System Maintenance Logs LOG MESSAGE DESCRIPTION Time calibration is successful The router has adjusted its time based on informati on from the time server .
Prestige 660R-6xC Series User’s Guide 271 Appendix G Table 96 System Error Logs LOG MESSAGE DESCRIPTION %s exceeds the max. number of session per host! This attempt to crea te a NA T session exceeds the maximum number of NA T session table entries allowed to be created per host.
Prestige 660R-6xC Series User’s Guide Appendix G 272 board %d line %d channel %d, call %d, %s C02 OutCall Connected %d %s The PPPoE, PPTP or dial-up call is connected. board %d line %d channel %d, call %d, %s C02 Call Terminated The PPPoE, PPTP or dial-up call was disconnected.
Prestige 660R-6xC Series User’s Guide 273 Appendix G The following table shows RFC-2408 ISAKMP payload types that the log displays. Please refer to the RFC for detailed information on each type.
Prestige 660R-6xC Series User’s Guide Appendix G 274 KE Key Exchange ID Identification CER Certificate CER_REQ Certificate Request HASH Hash SIG Signature NONCE Nonce NOTFY Notification DEL Delete V.
Prestige 660R-6xC Series User’s Guide 275 Appendix G.
Prestige 660R-6xC Series User’s Guide 276 Index A Address Assignment 55 Address mapping 78 ADSL, what is it? 28 ADSLstandards 30 Alternative Subnet Mask Notation 258 applicaions Internet ac cess 34 .
Prestige 660R-6xC Series User’s Guide 277 DSL (Digital Subscriber Line) 28 DSL line, reinitialize 11 0 DSL, What Is It? 28 DSLAM (Digital Subscriber Line Access Multiplexer) 34 Dynamic DNS 31 , 82 ,.
Prestige 660R-6xC Series User’s Guide 278 IP Address 42 , 56 , 74 , 107 , 130 , 15 2 , 156 , 179 , 195 , 200 , 226 IP Address Assignment 43 ENET ENCAP 43 PPPoA or PPPoE 43 RFC 1483 43 IP Addressing .
Prestige 660R-6xC Series User’s Guide 279 P Packet Error 193 Received 193 T ransmitte d 193 Packet T riggered 198 Packets 193 PA P 141 Password 52 , 11 4 , 11 8 , 140 , 189 passwor d 11 4 , 240 Peak.
Prestige 660R-6xC Series User’s Guide 280 Configuration 189 Get 189 GetNext 189 Manager 188 MIBs 189 Set 189 Tr a p 189 T rusted Host 190 SOHO (Small Of fice/Home Office) 34 Source-Based Routing 224.
Prestige 660R-6xC Series User’s Guide 281 web configurator screen summary 38 web service 241 X XMODEM protocol 203 Z ZyNOS 203 ZyNOS (ZyXEL Network Operating System) 202 ZyNOS F/W V ersi on 203 ZyXE.
Een belangrijk punt na aankoop van elk apparaat ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
