Gebruiksaanwijzing /service van het product PC 5170 van de fabrikant Acnodes
Ga naar pagina of 192
PC 5170 17-inch touch PANEL PC USER MANUAL.
Page 1.
PC 5170 Flat Panel PC REVISION HIST OR Y Ti tl e PC 5170 Flat Panel PC User M anual Rev i sion Num b er Descri ption Dat e o f I s su e 1.0 Initial release September 2 006 1.
PC 5170 Flat Panel PC SAFETY PRECAUTIO NS 1 Prior to installing, moving, and modifying the pane l PC, make sure the power is turned of f and the power cord is di sconnecte d. 2 Do no t a pp ly v ol ta ge lev el s that e xceed the sp ecified voltage rang e.
PC 5170 Flat Panel PC 5 The p anel PC is actively co oled. In no circum sta nces should the p an el PC operate with the opening s obstructe d by fo rei gn o bj ec ts. Howe ve r , t he ambient temperature of the installatio n sit e sh ould be ob serv ed a nd co ntro lled to avoid overheating the panel PC.
PC 5170 Flat Panel PC 1 Except for the properly inst alled front LC D panel, neve r spr ay or squir t liq uids di re ct ly o nt o an y c omp uter c omp o ne nt. If the device need s to be cleane d, please rub it with a piece o f dry and soft cl ot h or a sl ightl y m ois te ned c lot h wi th the exterior c asing.
PC 5170 Flat Panel PC 5 Cotton swab s - Cotton swaps m oistene d with rubbin g alcohol or water a re exc ell ent too ls fo r wipi ng har d to r each areas in the keyboard, mouse, and other location s. 6 Foam swabs - Whenever possibl e it is better to use lint free swabs su ch a s foam swabs.
PC 5170 Flat Panel PC CONVENTI ONS USE D IN THIS MANUAL WA R N I N G ! W arnings ap pear where ov erloo ked det ails m ay cau se damage to the equi pment or result in personal i njury . W arnings sho uld be take n seri ously . W arnings are easy to recogni ze.
PC 5170 Flat Panel PC T able of Content s 1 INTRODUCTION................................................................................................... 19 1.1 PC 5170 F LA T P ANEL PC O VER VIEW ....................................................
PC 5170 Flat Panel PC 2.5 P ERIPHERAL D EVICE I NTERF ACES , C ONNECTORS , AND S LOTS ................................. 38 2.5.1 OEM Options ................................................................................................... 38 2.5.2 Internal Slots .
PC 5170 Flat Panel PC 3.8.6 Serial Port Connection .................................................................................... 67 3.8.7 Audio Port Connection.....................................................................................
PC 5170 Flat Panel PC 5.3.8 Remote Access Configuration .........................................................................1 10 5.3.9 USB Con figura tion..........................................................................................1 12 5.
Page 1 1.
PC 5170 Flat Panel PC B.1 1 F AN C ONNECTOR ................................................................................................. 162 B.12 I NVER TER (LCD B ACKLIGHT ) C ONNECTOR ........................................................ 163 B.
PC 5170 Flat Panel PC List of Figures Figure 1-1: PC 5170 Fr ont View ................. ............. .............. ............................ .......21 Figure 1-2: PC 5170 Rear View ...... ................ .............. .............. ...........
PC 5170 Flat Panel PC Figure 4-2: CD Driv e Re tenti on Screws .................. ...... ..... ........ ...... ........ ...... ..... ......73 Figure 4-3: Internal Elevated Platform Rete ntion Screws ........... ....................... .....73 Figure 4-4: Elevated Platform Ret ention S cre ws (Top Panel) .
PC 5170 Flat Panel PC List of T a bles Ta ble 1 -1: PC 5170 Model Variation ............. ............................ ............. ..................20 Ta ble 1- 2: PC 5170 Specifica tions .... ........ ......... ........ ......... ......... .......
PC 5170 Flat Panel PC List of BIOS Menus BIOS Menu 1: Main ............. ..... ... ..... ... ... ..... ... ...... .. ... ...... .. ...... ... .. ...... ... ..... ... ... ..... ... ..84 BIOS Menu 2: Advanced............ ...... .. ...... ... .. ...... .
PC 5170 Flat Panel PC Glossary AC ’97 Audio Codec 97 ACPI Advanced Co nfiguration and Power Interfac e APM Advanced Power Management ARMD ATAPI Removable Media Device ASKIR Shift Keyed I nfrared ATA.
PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 18 ACNODES ® Corp..
PC 5170 Flat Panel PC Chapter 1 1 Introduction Page 19.
PC 5170 Flat Panel PC 1.1 PC 5170 Flat Panel PC Overview The PC 5170 flat panel PC is a flexible, multi- func tiona l fla t p anel PC that can be applied in diverse operation al envi ronment s and implemen ted in multi-faceted a pplicati ons.
PC 5170 Flat Panel PC 15 Hi gh br ig htnes s 17 ” i ndus tri al g ra de panel 16 Fully I/O function support: o 6 x COM (1 for Touch S creen) o 6 x USB 2.0 ports o 1 x PCI slot o 1 x CF so cket 17 Dual 10 /100/Gigabit Ethernet supported 18 RoHS co mpli ant 1.
PC 5170 Flat Panel PC 1.2.3 Rear Panel The rear panel has a fan vent, four VESA standard mounting holes and several retention screw holes. The VESA mounting holes are circled in Figure 1-2 . Fi gu re 1 -2 : PC 5170 Re ar V iew Page 22 ACNODES ® Corp.
PC 5170 Flat Panel PC 1.2.4 Top Panel The top pane l has two fan vents and three re tention screws for secu ring the d rive bay bracket. The retention scre ws a re circled in Figure 1-3 below .
PC 5170 Flat Panel PC Figure 1-4: Bottom View 1.2.6 Left Panel The left side panel ha s two fan vent s and four retention screws for se curing the two internal fans.
PC 5170 Flat Panel PC Figure 1-6: Left View 1.2.8 Frame An aluminum frame su rrou nds th e 17” T FT LC D screen. The b ack of the aluminum frame has sixteen mounting screw holes.
PC 5170 Flat Panel PC 1.3 PC 5170 Inte rnal Overview The PC 5170 internal components are configured in a three level format. An elevated platform on t he ri ght si de of t he chassi s supp ort s a HDD, a CD d rive and a F DD. On the secon d level, below the elevated platfo rm, are a mo therbo ard an d a PSU module.
PC 5170 Flat Panel PC SPECIFICA TION DET A IL Front Panel Aluminum Front Panel meet s IP65 standard Chassis Heavy-duty Steel LCD Panel 17” High lumi nance TFT LCD Resolution 1280 x 1024 (SXGA) Brigh.
PC 5170 Flat Panel PC SPECIFICA TION DET A IL Vib r a t io n 5 - 17Hz, 0.1” double ampli t ude displace ment. 17 - 640Hz, 1.5G accelerat ion, peak to peak. Shock 10G Accelera tion, peak to peak (11m s) Dimensions 452(W) x 356(H) x 110(D) mm Net/Gro ss W eight 8/12 Kg Environment RoHS Com pli ant Ta ble 1- 2: PC 5170 Spec if ica ti ons 1.
PC 5170 Flat Panel PC SPECIFICA TION DET A IL COM 1 x RS-232/422/485 p ort 5 x RS-232 port s (1 for optional touch screen ) USB 2.0 6 x USB 2.0 ports Driv e Interfaces 2 x SA T A drive connectors LPT 2 x A T A 100 channels KB/ MS 2 x PS/2 connector IrDA 1 x IrDA interface Table 1-3: Mother board Specificatio ns 1.
PC 5170 Flat Panel PC SPECIFICA TION DET A ILS Respon se T i me (ms) (at 25°C) 8 Power Consumption (W) 25.8 Interface 2ch L VDS Supply V oltage (V) 5 Backlight 4 CCFL Outline Dimensions (m m) 358.5 x 296.5 x 17.0 Wei ght (g) 1900 Table 1-4: 17” TFT LCD Monitor Spec ifications 1.
PC 5170 Flat Panel PC The specifi c a tions for the PSU module are shown in ( T able 1-5 ). V oltage AC90V ~ 264V AC Full Range Frequency 47 ~ 63 Hz INPUT Input Curren t 4A(RMS)@1 15V AC 2A(RMS)@ 2 30V AC Inrush Curre nt 50A Max for 1 15V AC 80A Max for 230V AC V olt age (V ) +3.
PC 5170 Flat Panel PC 1.5 Dimensions The dimensions of the PC 5170 flat panel PC are shown in Fig ure 1-9 below . Figure 1-9: Dimensions (units in mm) Page 32 ACNODES ® Corp.
PC 5170 Flat Panel PC Chapter 2 2 EMBEDD ED Motherboard.
Page 33.
PC 5170 Flat Panel PC 2.1 Introducti on The PC 5170 flat screen PC con tain s a EMBEDDED motherboa rd. The mothe r b oard i s the heart of any comp uter a nd is re sponsi ble for transmitting, recei ving and p rocessi ng dat a as well as d riv ing the dif ferent on-boa rd device s.
PC 5170 Flat Panel PC quality and full surround sound capability . 42 LAN Conne ct Interface (LCI) provid e s network solution s for 10/100 Mbp s Ethernet and 10/100 Mbps Etherne t with LAN manageabil.
PC 5170 Flat Panel PC o RAID Level 0 Support (ICH5R Only) 51 Integra ted IDE Controller o Supports “Na tive Mode ” Registe r and In terrupts o Independent timing of up to 4 drives o Ultra ATA/100/66/33, BMIDE and PIO modes o Tri-state modes to ena ble swap bay 52 Interrupt Cont roller o Supports up t o 8 PCI interrupt pins o Supports PCI 2.
PC 5170 Flat Panel PC 59 Zone Rendering 2 T echnolog y : Enhances the performance of zone renderi ng by using larger zone s and new co m ma nd s th at im pro ve g ra ph ic s pipeline ef fi ciency .
PC 5170 Flat Panel PC o Hardware mo tion compen sation sup port for DVD pl ayback o 4x2 overlay filter o 350 MHz DA C frequen cy o Maximum DVO pixel rat e of up to 330MP/s o Flat panel monitors and TV.
PC 5170 Flat Panel PC 69 1 x A TX power conne ctor 70 2 x Audio connectors 71 1 x DIO connector 72 3 x Fan connectors 73 1 x FDD connector 74 2 x IDE device connectors 75 1 x IrDA conn ector 76 1 x Ke.
PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 40 ACNODES ® Corp..
PC 5170 Flat Panel PC Chapter 3 3 Installation and Configuration Page 41.
PC 5170 Flat Panel PC 3.1 Installation Precautions When inst alling the PC 5170, please follow the p recautio ns liste d below: 1 Power turned off : Wh en inst alli ng the PC 5170 make sure the po wer is of f. Failing to turn off the power may caus e severe injury to the body and/or damage to the system.
PC 5170 Flat Panel PC 3.3 Installation and Configuration Steps The following inst allatio n st eps mu st be followed. Step 1: Step 2: Step 3: Step 4: Step 5: Step 6: Unpac k t he PC 5170. Set the jumpe r settings. Install HDD, FDD a nd CD drive. Mount the PC 5170 flat panel PC.
PC 5170 Flat Panel PC 3.4.1 Packing List The PC 5170 flat panel PC is shipped with the following components: 107 1 x Carton 108 1 x Power cord 109 1 x Screw kit 110 1 x HDD IDE cabl e (44 pi n + 2 x 4.
PC 5170 Flat Panel PC NOTE: A jumper is a m et al bridge t hat is used to close an ele c trical ci rcuit. It consist s of two metal pins and a s m all m etal clip (often protected by a plastic cover) that slides over the pins to connect them.
PC 5170 Flat Panel PC Figure 3-1: Back Cover Retent ion Scre ws 3.5.2 CF Card Setup (JP12) The CF Card Setup jumpe r configu re s a CF card as ei ther the slave or the master . JP12 DESCRIPTIO N Open Slave (D efault ) Close Master Table 3-2: CF Card Setup Jumper Settings Page 46 ACNODES ® Corp.
PC 5170 Flat Panel PC 3.5.3 Clear CMOS Setup (JP1) If the motherb oard fails to boot due to improper B IOS sett ings , use this jump er to c lear the CMOS data and re set the system BIOS information . To do this, use the jum per cap to close pin s 2 and 3 for a few second s then rein stall the jumper clip back to pins 1 and 2.
PC 5170 Flat Panel PC 3.5.5 COM port RI and Voltage Sel ection Use JP7 and JP9 to set pin 9 of COM1 as signal RI or voltage source. JP9 DESCRIPTION 2-3 clos ed COM1 RI PIN Use RI 1-2 clos ed COM1 RI P.
PC 5170 Flat Panel PC JP6 DESCRIPTION 2-3 clos ed COM2 RI PIN Use Voltag e +12V 1-2 clos ed COM2 R I PIN U se Vo ltag e +5V Table 3-8: COM2 RI Volta ge Selection Jumper Use JP13 an d JP15 to set pin 9 of COM 3 as signal RI or volt age so urce.
PC 5170 Flat Panel PC 3.5.6 CPU Voltage Setting (S3) T wo dif fere nt types of CPU can be used on the EMBE DDED mothe rboard. One i s Pentium 4 CPU and the other is Pentium4-M CP U. Use the CPU volta ge setting jump er (S3) to configure th e power of CP U.
PC 5170 Flat Panel PC JP2 DESCRIPTION 1-2 clos ed +3.3V (default) 3-4 clos ed +5V 5-6 clos ed +12V Table 3-15: LCD Voltage Setup Ju mper Settings 3.6 HDD, FDD and CD Drive Installation 3.6.1 HDD Installation T o install a HDD, plea se follow the steps below: Step 1: Step 2: Remove the back cover ( Se ct io n 3.
PC 5170 Flat Panel PC Insert the four retention screws into the base of the HDD bracket. Step 5: Connect the IDE/SA T A cable from the IDE/SA T A connector on the motherboard to the rear of HDD. Step 0: 3.6.2 FDD Installatio n T o install the FDD, plea se follow the step s belo w: Step 1: Step 2: Step 3: Remove the back cover ( Se ct io n 3.
PC 5170 Flat Panel PC Figure 3-4: FDD Adap ter and FDD Br a cket Ins t allation Step 5: Step 6: Step 7: At tach t he FDD b ra cket to the FDD . T o do this, align the four retent ion scre w holes in the F DD b rac ket with the retenti on screw hol es on th e si des of the F DD.
PC 5170 Flat Panel PC Figure 3-5: CD Drive Adapter Installation Step 4: Step 5: Remove the back cover of the PC 5170 (see Section 3.5.1 ). The CD drive blan k plate a ssembly is att a ched to the re ar p anel by t wo retention scre ws ( Figure 3-6 ).
PC 5170 Flat Panel PC Figure 3-7: Remov e CD Driv e Step 6: The CD drive blank plate assembly consists of a blan k plate and two brackets that attach th e assembly to the cha ssis. The two b ra cket s each h ave two screws that attach them to the bla nk plate.
PC 5170 Flat Panel PC Figure 3-9: CD Driv e Blank Plate As se mbly WA R N I N G ! The two scre ws (bl ack M2 *3) sho wn in the lef t image of Figure 3-9 are dif ferent from the two screws (silve r M2*2) sho wn in the right. Please secure th e co rrect screws i nto the CD drive a ccordi ng to the im ages sh own in the Figure 3-9 .
PC 5170 Flat Panel PC Figure 3-10: CD Drive Installed Page 57.
PC 5170 Flat Panel PC 3.7 Mounting the System WA R N I N G ! When m ounting the PC 5170 flat pan el PC onto an arm, wall or into a pan el, it is advisa ble to have m ore than one person h elp with th e install ation to prevent acci dental dam ag e to the p ane l and avoid p ersonal injury .
PC 5170 Flat Panel PC Figure 3-11: Wall-moun ti ng Bracket Step 6: Step 7: Step 8: Insert the four monitor mou nting screws provided in the wall mou nting kit into the four screw ho les on the real p anel of the monitor and tighten until the scre w shank i s secured ag ain st the rear p a nel (see Figure 3-12 ).
PC 5170 Flat Panel PC Figure 3-12: Mount the Chassis Step 9: Secure the panel PC with the wall-mounting kit. T o do this, stick the protective cush ion to the wall-mounting k it first. Then, put the wall-mounting kit on the top panel of the panel PC. Carefully mark t he location of the wall-mounting kit screw holes on the wall.
PC 5170 Flat Panel PC Figure 3-13: Secure the Chassis 3.7.2 Panel Mounting T o mount the PC 5170 flat panel PC into a pa nel, please follow the steps below . NOTE: The m axim um panel thickness should be no m ore than 6m m. Step 1: Step 2: Select the position on the panel to moun t the PC 5170.
PC 5170 Flat Panel PC Figure 3-14: Cut the Panel Step 3: Step 4: Slide the PC 5170 through the hole unti l the metal frame is flush agains t the pane l. Insert the pan el mounting clamps into the pre -forme d holes alon g the edg es of the PC 5170, behind the metal fram e.
PC 5170 Flat Panel PC Figure 3-16: Tighten the Panel Mounting Clamp Screw s 3.7.3 Arm Mounting The PC 5170 is VESA (V ideo Elect ronics S tandar ds Ass oci at io n) c ompl i ant and can be mounted on an a rm with a 100m m interface p ad. T o mount the PC 5170 on an a rm, please follow the step s bel ow .
PC 5170 Flat Panel PC PC 5170 flat panel PC. The PC 5170 flat panel PC arm moun t retention screw hole s are shown in F i gure 3-1 7 . Figure 3-17: Arm Mou nt Retention Scre w Holes Step 4: Secure the PC 5170 to the interfa ce pa d by insertin g four retention screws through the mounting a rm interface pad and into the PC 5170 flat panel PC.
PC 5170 Flat Panel PC Step 3: Step 4: Mak e sure the re ten tion scre w holes at the rear of the PC 5170 frame are aligned with the retentio n scre w hol es in the cabi net/rack b r a cket. Secure the cabinet/rack bracket to the monitor by inserting and tightening the retention screws ( Figur e 3 - 18 ).
PC 5170 Flat Panel PC Figure 3-19: Install into a Rack/Cabinet Step 6: Once the PC 5170 flat panel PC with the attached rack/cabinet br acket has been properly inserted into the rack/cabinet, secure the front of the rack/cabine t bracket to the front of the rack/cabinet ( Figure 3-19 ).
PC 5170 Flat Panel PC 3.8.2 Ethernet Connection The two external p eripher al interface RJ-4 5 conn ect ors ca n be connecte d to an extern al LAN to provide Internet connec tivity to the flat panel PC. 3.8.3 USB Conn ection The external periphe ral interface USB c onnectors provide easy and quick acce ss to external USB devices.
PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 68 ACNODES ® Corp..
PC 5170 Flat Panel PC Chapter 4 4 System Maintenance Page 69.
PC 5170 Flat Panel PC 4.1 System Maintenance Introduction The following system com ponent s may require mainte nance. 129 Motherboa r d 130 DIMM module 131 PSU mod ule 132 Cooli ng fan s If these com pone nt s fail, they must b e repl ac ed. Please cont a ct the sy stem resell er or vendor to purchase replacemen t p arts.
PC 5170 Flat Panel PC W ARNING! PLEASE T AKE ANTIST A TIC PREC AUTIONS WHEN WORKING WITH THE INTERNAL COM PONENTS. The interior of the PC 5170 contains very sensitive electronic componen ts. These co mponent s are easil y dam aged by electrost atic discharge (ESD).
PC 5170 Flat Panel PC Figure 4-1: Rear Cover Retent ion Screws (Real Panel) 4.3.2 Detaching the Elevated Platform Please read t he warnings at the beginni ng of Section 4.3 before attempting to access a ny PC 5170 int ernal com ponents. The elevated platform su pports the FDD, CD drive and HDD.
PC 5170 Flat Panel PC Figure 4-2: CD Drive Retention Screws Step 3: The elevated platform i s secured to the chassi s with fo urteen retenti on screws, four on the internal pl at form ( Figure 4-3 ), .
PC 5170 Flat Panel PC Figure 4-5: Ele v ated Platform Retention Screw s (Right Panel) Figure 4-6: Ele v ated Platform Retention Screw s (Bottom Panel) Figure 4-7: Ele v ated Platform Retention Screws (PCI Riser Card) 4.4 DIMM Replacement Please read t he warnings at the beginni ng of Section 4.
PC 5170 Flat Panel PC Step 2: Loc ate t he DIM M socke t on the motherboard near the right of the chassis. Push down on the white levers of the socket until the DIMM module is dislodged from the socket ( Figure 4-8 ).
PC 5170 Flat Panel PC Figure 4-9: PS U Moth erb oard Connec tors The PSU module i s secured to the PC 5170 flat panel PC with six retention scre ws, two conne ct to the bottom pa nel ( Figure 4-10 ), two con ne ct to the internal PSU bra cket ( Figure 4-12 ) which is connected to the cha ssis by two scre ws ( Figure 4-11 ).
PC 5170 Flat Panel PC Figure 4-11: PSU Bracket to Chassis Retention Scre ws Step 6: Remove the retention screws that c onnect the PSU to the PSU bracket ( Figure 4-12 ). Step 0 : Figure 4-12: PSU Brac ke t Rete ntion S crews 4.5.2 Install the New PSU To inst all a new PSU mod ule, plea se follow t he steps belo w.
PC 5170 Flat Panel PC Step 2: Step 3: Step 4: Step 5: Step 6: Step 7: Insert the PSU modul e and bra cket assembly into th e cha ssis a nd attach the PS U b rack et to t he chassi s w it h t he previously re mov ed retentio n screws.
PC 5170 Flat Panel PC Figure 4-13: Sy stem Cooling Fans Motherb o ard Connec tor Step 4: Remove the system cooling fans rete ntion screws from the left pane l ( Figure 4-14 ). Figure 4-14: Sy stem Cooling Fans Left Panel Re te ntion Scre w s Step 5: Remove the system coolin g fans from th e chas sis.
PC 5170 Flat Panel PC Step 4: Step 5: Reatta ch the elevated plat f orm. Repla ce the back cover . Step 0: Page 80 ACNODES ® Corp..
PC 5170 Flat Panel PC Chapter 5 5 AMI BIOS Page 81.
PC 5170 Flat Panel PC 5.1 Introducti on A licensed copy of AMI BIOS is preprogra mmed into the ROM BIO S. The BIOS setup program allo ws users to modify the basi c syst em configuratio n. This cha pter describe s how to acce ss the BIOS setup prog ram and the co nf ig ur ati on op ti on s t hat ma y be change d.
PC 5170 Flat Panel PC Key Function F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS chang es, only for Main Menu Table 5-1: BI OS Nav igation Key s 5.
PC 5170 Flat Panel PC 5.2 Main The Main BIOS menu ( BIOS Menu 1 ) appears whe n the BIOS Setup pro gra m is entere d. The Main menu gives a n o verview of the basi c sy stem information. BIOS Menu 1: Main Î Sy stem Ov ervie w The System Overview lists a brief summary of different system components.
PC 5170 Flat Panel PC 143 Sy stem Memory : Displays the auto-detected system memory . o Size : Lists m emory size The Sy st em Ov ervie w fi el d also has two use r configurabl e fields: Î System Time [xx:xx:xx] Use th e Syst em Ti me opt ion to se t t he sys tem time.
PC 5170 Flat Panel PC BIOS Menu 2: Adv anced Page 86 ACNODES ® Corp..
PC 5170 Flat Panel PC 5.3.1 CPU Configur ation Use the CPU Configu ration menu ( BIOS Menu 3 ) to view detailed CPU sp ecificati ons and configure the CPU.
PC 5170 Flat Panel PC The following CPU Co nfigu rati on me nu items can be configured. 159 Max CPUID V alue Limit 160 Hyper Thread ing T ech nology Î Max CUPID Value Limit [Disabled] NOTE: If the OS is NT , this value must be set to enabled.
PC 5170 Flat Panel PC 5.3.2 IDE Configuration Use the IDE Configuration menu ( BIOS Menu 4 ) to change and/or set the configuration of the IDE devices installed in the sys tem. BIOS Menu 4: IDE Configuration Î IDE Configur ation [P-AT A Only ] Use IDE Configuratio n opti on to setup the c onfig uration of the hard drive interfa ces.
PC 5170 Flat Panel PC Î S-ATA Ru nning Enhance d Mode [Yes ] Use S-ATA Running Enhanced Mode option to s elec t whet her t he S- ATA i nte rfac e is runnin g in enhan ced mo de or lega cy mode. Î Y es D EF AUL T The S-A T A interface is running in enh an ced mode.
PC 5170 Flat Panel PC Î Hard Disk Write Protect [Disabled] The Hard Disk Write Prote ct BIOS option prot ect s the hard disks from being ov erwritten.
PC 5170 Flat Panel PC Î Host & D ev ice D EF AUL T Both the motherboa rd onboard IDE controlle r and IDE disk drive are used to detect the type of IDE cable used. Î Host The motherb oard onboar d IDE contro ller detect s the type of ID E cable used.
PC 5170 Flat Panel PC 5.3.2.1 IDE Master , IDE Slave Use the IDE Master and IDE Slave configuratio n menu to view both prim ary and secon dary IDE device details and configure t he IDE d evice s con nected to the sy stem.
PC 5170 Flat Panel PC transfers of up to 64 KB per interrupt. 179 PIO Mode : Indicates the PIO mode of the installed device. 180 S.M.A.R.T . : Indicates whether o r not the Self-Monitori ng Analysis a nd Reporting T echn ology protocol i s suppo rted.
PC 5170 Flat Panel PC Î Disabled BI OS i s p rev en te d fr om using the LBA mode contro l on the specified cha nnel. Î Auto D EF AUL T BIOS auto detect s th e LBA mode control on the spe cified channel.
PC 5170 Flat Panel PC Î 4 PIO mode 4 selected wi th a maximum transfer rate of 16.6MBps (This setting generally works with all hard disk drive s manufactured after 1 999. For oth er disk drives, such as I DE CD- ROM drive s, chec k th e specifications of the drive.
PC 5170 Flat Panel PC 5.3.3 Floppy Con f i g u r a tio n Use the Floppy Configuration menu ( BIOS Menu 6 ) to set or change the configurations for floppy disk drives. BIOS Menu 6: Flo ppy Configuration Î Floppy A [1.44 MB 3½ ”] The Floppy A configuration option determines the typ es of the fl oppy drive installed in the sys tem .
PC 5170 Flat Panel PC 5.3.4 Super IO Configurati on Use the Super IO Co nfigur ation menu ( BIOS Menu 7 ) to set or cha nge the co nfiguratio n s for the FDD controllers, parallel port s an d serial po rts.
PC 5170 Flat Panel PC Î 3F8/IRQ4 D EF AUL T Serial Port 1 I/O port address is 3 F8 and the interrupt address is IRQ4 Î 3E8/IRQ4 Serial Port 1 I/O port address is 3E8 and the interrupt address is IRQ.
PC 5170 Flat Panel PC Î Disabled No base address is assi gn ed to the Parallel Port Î 378 D EF AUL T Parallel Port I/O port add re ss is 378 Î 278 Parallel Port I/O port add re ss is 278 Î 3BC Par.
PC 5170 Flat Panel PC Î IRQ5 IRQ5 is assigned as the parallel port interrupt address Î IRQ7 D EF AUL T IRQ7 is assigned as the parallel port interrupt address Î Digital I/O Address [280h] Use the Digital I/O Address option to select the interrupt address for digital I/O.
PC 5170 Flat Panel PC Î 10 Serial port 3 IRQ ad dre ss is 10 Î 11 D EF AUL T Serial port 3 IRQ ad dre ss is 1 1 Î Serial Port4 Address [2E 8] Use the Serial Port4 IRQ option to sele ct the interrupt addre ss for serial po rt 4.
PC 5170 Flat Panel PC Î 2F0 D EF AUL T Serial port 5 I/O port add re ss is 2F0 Î 2E0 Serial port 5 I/O port addre ss is 2E0 Î Serial Port5 I RQ [11] Use the Serial Port5 IRQ option to sele ct the interrupt addre ss for serial po rt 5.
PC 5170 Flat Panel PC 5.3.5 Hardw are Health Configuration The Hardware Health Configuration menu ( BIOS Menu 8 ) shows the operating temperature, fan speeds and system voltages.
PC 5170 Flat Panel PC o Fan2 Speed o Fan3 Speed 190 V oltages : The followin g sy stem volt ages are m onitored o Vcore o +1.50V o +3.30V o +5.00V o +12.0V o 5VSB 5.3.6 ACPI Configurat ion The ACPI Configuratio n m enu ( BIOS Menu 9 ) configure s the Advanced Co nfigu ration and Power Interfa ce (A CPI) and Powe r Man agement (APM) option s.
PC 5170 Flat Panel PC 5.3.6.1 General AC PI Configuration Use the General ACPI Conf iguration menu ( BIOS Men u 10 ) to select the ACPI state when the system is su spe nded. BIOS Menu 1 0: General ACPI Configuration Î Suspend Mode [S1 (POS)] Use the Suspend Mod e op tion to specify the sl eep state the system enters wh en it is not being used.
PC 5170 Flat Panel PC 5.3.6.2 Advanced AC PI Configuration Use the Advanced ACPI C onfiguration menu ( BIOS Menu 11 ) to sele ct the ACPI st ate when the syst em is suspended. BIOS Menu 11: Adv anced ACPI Configuration Î ACPI 2.0 Features [No ] Use the ACPI 2.
PC 5170 Flat Panel PC Î ACPI APIC Support [Ena bled] Use the ACPI APIC Support option to add a pointer to a n AC PI API C t abl e i n th e RS DT (Root System Description Table). The RSDT i s an a rray of poi nters that di rect the sy stem to the physi cal addre sses of other d escription tabl es.
PC 5170 Flat Panel PC Î Enabled D EF AUL T Pointers to the AMI OEMB table are provided in the RSDT and the XSDT Î Headless Mode [Disabled] Use the Headless Mode option to update the ACPI FACP (Fix ed ACPI Descripti on Table) to indicate headle ss operations, i.
PC 5170 Flat Panel PC 5.3.7 MPS Configur ation Use the MPS Configuration menu ( BIOS Menu 12 ) to s elect `he multi-processor table. BIOS Menu 12: MPS Conf iguration Î MPS Rev i sion [1.4] Use the Multiproce ssor Specification (M PS) fo r OS option to speci fy the MPS version to be used.
PC 5170 Flat Panel PC Î Remote Access [Disabled] Use the Remote Acce ss option to ena ble or di sabl e access to the remote functio nalities of the system.
PC 5170 Flat Panel PC 5.3.9 US B Configuration Use the USB Config uration menu ( BIOS Menu 13 ) to read USB co nfiguration informatio n and configure the USB settings. BIOS Menu 13: US B Co n figuration Î USB Configuration The USB Conf iguration field sho ws the system U SB con fi gu rat ion.
PC 5170 Flat Panel PC Î Disabled USB function support di sab led Î 2 USB Port s USB function sup port two USB port s Î 4 USB Port s USB function support four USB port s Î 6 USB Port s USB function.
PC 5170 Flat Panel PC 5.4 PCI/PnP Use the PCI/PnP menu ( BIOS Me nu 14 ) to configure advanced PCI and PnP settings. WARNING! Setting wrong values for the BIOS selections in the PCIPnP BIOS menu m ay cau se th e system to m alfunction.
PC 5170 Flat Panel PC Î No D EF AUL T If the operating system does not meet the Plug a nd Play specifications, this option al lows the BIOS to configur e all the devices in the sys tem. Î Y es Thi s setting allows the operating system to change the interrupt, I/O, and DMA settings.
PC 5170 Flat Panel PC Î Palette Snooping [Disabled] Use the Palette Snooping option to enable or disable the palette snooping function. Î Disabled D EF AUL T Unless the VGA card manufacturer requires palette snoopin g to be enabled, this option shou ld be disabled.
PC 5170 Flat Panel PC Î PCI Slot 2 PCI Slot 2 is selected a s the location of the Of fBoard PCI IDE adapter c ard. Only s elect this s lot if the adapter card is inst alled in PCI Slo t 2. Î PCI Slot 3 PCI Slot 3 is selected a s the location of the Of fBoard PCI IDE adapter c ard.
PC 5170 Flat Panel PC 203 IRQ7 204 IRQ9 205 IRQ10 206 IRQ 1 1 207 IRQ 14 208 IRQ 15 Î DMA Chan n el# [Av ailable] Use the DMA Channel# op tion to assi gn a spe c ific DMA channel to a particular PCI/PnP device.
PC 5170 Flat Panel PC Î Reserved Memor y Size [Disabled] Use th e Re se rv ed M em ory S ize BI OS o pti on to spe cify the amount of memory that shoul d be rese rved for legacy ISA devices.
PC 5170 Flat Panel PC 5.5 Boot Use the Boot menu ( BIOS Menu 15 ) to configure system boot options. BIOS Menu 15: Boot Page 120 ACNODES ® Corp..
PC 5170 Flat Panel PC 5.5.1 Boot Settings Configur ation Use the Boot Settings Configuratio n men u ( BIOS Men u 16 ) to confi gure adva nce d system boot options. BIOS Menu 16: Boot Settings Configuration Î Quick Boot [Enabled] Use th e Q ui ck B oo t B IOS op ti on t o m ake the comput er spee d up the boot pro cess.
PC 5170 Flat Panel PC Î Disabled D EF AUL T Normal POST messages displayed Î Enabled OEM Logo displayed instead of POST messages Î AddOn ROM Display Mode [For ce BI OS] Use the AddOn ROM Di splay Mode option to allow add-on ROM (read-onl y memory) messages to be displ ayed.
PC 5170 Flat Panel PC Î Disabled PS/2 mouse support i s disabled a nd pr evented from using syst em resou rces. Î Enabled Allows the system to use a PS/2 mouse.
PC 5170 Flat Panel PC 5.5.3 Removable Dri ves Use the Rem ovable Drives menu ( BIO S Menu 18 ) to spe cify the boot seq uence of the available FD Ds. Whe n the menu is op ened, t he F DDs conn ecte d to the system are listed as shown bel ow: 218 1st Dri ve [1st FLOPPY DRIVE] NOTE: Only the driv es connected to the syst e m are sho wn .
PC 5170 Flat Panel PC 5.6 Security Use the Security menu ( BI OS Menu 19 ) to set system and user passwords. BIOS Menu 19: Securit y Î Change Supervisor Passw or d Use the Change Supervisor Password to set o r ch ange a superviso r password. The default for this option is Not Installed.
PC 5170 Flat Panel PC 5.7 Chipset Use the Chipset m enu ( BIOS Menu 20 ) to access the NorthBridge and S outhBridg e configuratio n menus WARNING! Setting the wrong values for the Chip set BIOS selections in the C hipset BIOS menu may cause the syst em t o malfuncti on.
PC 5170 Flat Panel PC 5.7.1 NorthBridge Co nfi gur ati on Use the Nort hBridge Conf iguration menu ( BIOS Menu 21 ) to configure the n orthbridge chipset .
PC 5170 Flat Panel PC Î Configure DRAM Timing by SPD [Enabled] Use the Confi gure DRAM T iming by SPD option to de te rmi ne i f t he sy stem u se s th e S PD ( Serial Presence Detect) EEPROM to c onfigure the DRAM timing.
PC 5170 Flat Panel PC Î Init. Graphic Adapter Pr iority [PCI/Int-VGA] The Init. Graphic Adapter Priority option selects the gr aphics controll er the system uses as a primary boot device .
PC 5170 Flat Panel PC Î Boot Display Devi ce [CRT +LFP ] Use the Boot Display Device option to select t he display device used by the system when it boots .
PC 5170 Flat Panel PC 5.7.2 SouthBridge Conf igu rat ion The SouthBri dge Configuration menu ( BIOS Menu 22 ) the sout hbrid ge chi pset to be configured. BIOS Menu 22: Sout hBridge Chipset Con figuration Î OnBoard AC97 Audio [Auto] Use the OnBoard A C97 Audio option to enable or disable the AC’9 7 CODEC.
PC 5170 Flat Panel PC 5.8 Power The Power m enu ( BIOS Menu 23 ) allows the advan ced po wer ma nagement options to be configured. BIOS Menu 23: Po wer Î Power Management/APM [Enabled] Use the Power Management/APM BIOS option to enable ac cess to the advanced power management features.
PC 5170 Flat Panel PC Î Video Pow er Do w n Mode [Suspend] The Video Power Down Mode BIOS option sp ecifies in what system mode the video device can be turned off.
PC 5170 Flat Panel PC 244 20 Min 245 30 Min 246 40 Min 247 50 Min 248 60 Min Î Suspend Time Out [Disabled] The Suspend Time Out option specifie s what l ength of time without activity on certain compone nts will place those compone nts in a su sp ended state.
PC 5170 Flat Panel PC Î Resto re o n AC Po w e r L o ss [L ast Sta te ] Use the Restore o n AC Power Lo ss option to sp ecif y what state t he system returns t o if there is a sud den loss of p ower to the system.
PC 5170 Flat Panel PC Î Disabled D EF AUL T The real time clo ck (R TC) can not ge nerate a wa ke event Î Enabled If selected, the following appears with values that can be sel ected: Î RTC Alarm D at e (Day s) Î Sy stem Time After setting t he alarm, the comp uter tu rns it self on from a susp e nd state whe n the alarm goes of f.
PC 5170 Flat Panel PC Î Save Changes and Ex it Use the Save Changes an d Exit option to save the change s made to the BIOS options and to exit the BIOS configuration setup program. Î Discard Cha nges and Ex it Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system.
PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 138 ACNODES ® Corp..
PC 5170 Flat Panel PC Appendix A A ACNODES Panel PC Product Line.
Page 139.
PC 5170 Flat Panel PC A.1 ACNODES Panel PC Product s A.1.1 Overview ACNODES panel PC products are fle xible, multi-functional flat panel PCs that can be applied in d ive rse operati onal envi ronment s and i mpleme nted in multi- faceted applications .
PC 5170 Flat Panel PC Model PPC-2706GS LCD Size 6.5” TFT LCD 8.4” TFT LCD Max. Resolution 640 x 480 800 x 600 Brightness 400 cd /m2 220 cd /m2 LCD Color 262K 262K View i ng A ngle 120/100 120/100 .
PC 5170 Flat Panel PC A.2.2 PPC-37 Se ries Panel PC Sol utions All the models listed in the table below support Intel Pentium® M / Celeron ® M / ULV Celer on ® M 1GHz/80 0MHz CPUs. Model PPC-3708GS PPC-3710GS PPC-3715GS LCD Size 8.4” TFT LCD 10.
PC 5170 Flat Panel PC Model PPC-3708GS PPC-3710GS PPC-3715GS 2 x SATA 2 x SATA 2 x SATA 2 x SATA 2 x SATA SSD CF Type II CF Type II CF Type II CF Type II CF Type II Expansion Slot N/A N/A N/A 1 x PCI 1 x PCI HDD Driv e Bay 1 x 2.5” SATA/I DE HDD 1 x 2.
PC 5170 Flat Panel PC A.2.3 PPC-51 Se ries Panel PC Sol utions All the models listed in the table below supp ort Intel Pentium® 4 / Celeron® D CPUs up to 2.8GHz. Model PPC-5150GS LCD Size 15” TFT LCD 17” TFT LCD 19” TFT LCD Max. 1024 x 786 1280 x 1024 1280 x 1024 Resolution Brightness 350 cd/m 2 300 cd/m 2 300 cd/m 2 LCD Color 262K 16.
PC 5170 Flat Panel PC Model PPC-5150GS w/o Anti-Sho ck w/o Anti-Sho ck w/o Anti-Sho ck FDD Driv e Ba y 1 x Slim FDD 1 x Slim FDD 1 x Slim FDD CD-ROM 1 x Slim CD-R OM 1 x Slim CD-R OM 1 x Slim CD-R OM .
PC 5170 Flat Panel PC Model PPC-5150GS Celer on ® D Celer on ® D Celer on ® D RAM 2 x DDR 400MHz DIMM so cket up to 2GB 2 x DDR 400MHz DIMM so cket up to 2GB 2 x DDR 400MHz DIMM so cket up to 2GB I/O Ports 1 x RS-232/422/485 1 x RS-232/422/485 1 x RS-232/422/485 3 x RS-232 3 x RS-232 3 x RS-232 4 x USB 2.
PC 5170 Flat Panel PC A.2.5 PPC-53 Se ries Panel PC Sol utions All the models listed in the table below support Intel Pentium® M / Celeron ® M / ULV Celer on ® M 1GHz/80 0MHz CPUs.
PC 5170 Flat Panel PC HDD Driv e Bay 1 x 2.5” SATA/ID E HDD CD-ROM 1 x Slim CD-R OM Driv e Bay Powe r Supply 150W ATX Power Mounting Stand/ Rack/ Wall/Panel/ Arm Dimension (W xDxH) mm 410 x 309 x 11.
PC 5170 Flat Panel PC Appendix B B Interface Connectors Page 149.
PC 5170 Flat Panel PC The PC 5170 flat panel PC EMBEDDED motherboa rd come s with a number of per ipher al interface connectors and conf igu rati on jump ers list ed in Chapte r 2 . The pinouts for these connectors are lis ted below. B.1 Floppy Disk Drive Connector EMBEDDED board is e quipped with a 34 -pin dai sy-chai n driver con nector cabl e.
PC 5170 Flat Panel PC B.2 PCI E-IDE Disk Drive Connector Four IDE (Integrate d Dev ice Electroni cs) ha rd disk drives can be attache d to the EMBEDDED IDE controller .
PC 5170 Flat Panel PC B.3 Parallel P ort This port i s usually con ne cted to printe r . The E MB E DD ED include s one on-b oard pa rallel port, accesse d throug h 25-pin D-type fe male connect or LPT1.
PC 5170 Flat Panel PC CN20 A: Seri al Port DB-9 Male Conne ctor ( CO M 1) PIN Description 1 DATA CARRIE R DETECT (DCD) 2 RECEIV E DATA (RX D) 3 TRANSMIT DATA (TXD) 4 DATA TERMI NAL READY (DT R ) 5 GRO.
PC 5170 Flat Panel PC RS-485 Mod e PIN Description PIN Description 1 RTX- 2 NC 3 RTX+ 4 NC 5 NC 6 NC 7 NC 8 Voltage 9 NC 10 NC CN20 B: Seri al Port DB-9 Male Conne ctor ( CO M 2) COM2 sup po rts three mo des: RS-232, RS -4 22 and RS-485 (via DB-9 Con nec tor).
PC 5170 Flat Panel PC RS-485 Mod e PIN Description PIN Description 1 RTX- 6 NC 2 RTX+ 7 NC 3 NC 8 NC 4 NC 9 Voltage 5 NC COM3: Seria l Port 2x5 Pin Head er Co nnector PIN Description PIN Description 1.
PC 5170 Flat Panel PC CN22: Serial Port DB-9 Male Connector (COM4) PIN Description 1 DATA CARRIE R DETECT (DCD) 2 RECEIV E DATA (RX D) 3 TRANSMIT DATA (TXD) 4 DATA TERMIN AL READ Y (DT R ) 5 GROU ND (.
PC 5170 Flat Panel PC B.5 Keyboard / Mouse Connector The EMBEDDED provide s one keybo ard and one mo use box heade r con nector , as well as external PS/2 keyboard an d mouse co nnecto rs.
PC 5170 Flat Panel PC CN15: PS/2 Mouse 5-pin Head er Co n nector PIN Description 1 MS CLOCK 2 MS DATA 3 N/C 4 GND 5 +5V B.6 External Switches and Indicato rs CN8: Multi Panel PIN Description PIN Descr.
PC 5170 Flat Panel PC B.7 USB Port Connector The EMBEDDED has ei ght built-in USB port s for the future I/O bus ex pan sion. CN26, CN27, CN28: 8-PIN Header USB Connectors PIN Description 1 8 VCC 3 6 U.
PC 5170 Flat Panel PC B.8 IrDA Infrared Interface Port The EMBEDDED has a buil t-in IrDA port that sup ports S erial Infra red (SIR) or Amplitude Shi f t K ey ed I R (A S KIR ) int erfa ces. T o use th e I rDA por t, con fi gur e t he FI R or ASK IR model in the Peripheral Setup COM2 i n BIOS.
PC 5170 Flat Panel PC B.9 VGA Connector The EMBEDDED provides one DB -15 f emale conn ector a nd on e built-in 10-pi n VGA box head er conn ector that can be co nnected dire ctly to a monoch rome CRT monitor as well as high re solutio n color CR T monitor .
PC 5170 Flat Panel PC B.10 LAN RJ45 Connector The EMBEDDED is equipp ed with two Gigabit Ethernet Controlle r R TL81 10SC chip sets and tw o G bE L AN RJ- 45 c on ne c t or s.
PC 5170 Flat Panel PC F AN2: Sy stem Fan Connector PIN Description 1 GND 2 +12V 3 Fan Sensor F AN3: Sy stem Fan Connector PIN Description 1 GND 2 +12V 3 Fan Sensor B.
PC 5170 Flat Panel PC B.13 LCD Panel L VDS Interface Connector The EMBEDDED provides up to 48-bit color TFT LCD. CN3 0: D F13-30 DP-1. 25 L VDS Interface Connector PIN Description PIN Description 1 GN.
PC 5170 Flat Panel PC CN2: Audio LINE OUT (2.54mm) PIN Description PIN Description 1 LINEOUT_L 2 GND 3 GND 4 LINE OUT_R CN24: Audio Jack Color Descrip tion RED MIC IN BLUE LINE IN GREEN SPEAK OUT B.
PC 5170 Flat Panel PC B.16 Comp act Flash TYPE I I S torage Card Socket The EMBEDDED configures Comp act Flas h TYPE II S t orage Card in IDE Mode. CF1: Compact Flash TYPE II Socket PIN Assignment PIN.
PC 5170 Flat Panel PC B.17 A TX Power Connector PW2 is a 20-pin A TX powe r supply con nector with the following pin assignme nt s. PW2: A TX Po w er Supply Connector PIN Description PIN Des cription 11 3.3V 1 3.3V 12 -12V 2 3.3V 13 GND 3 GND 14 PS-ON 4 +5V 15 GND 5 GND 16 GND 6 +5V 17 GND 7 GND 18 -5V 8 Powe r good 19 +5V 9 5VSB 20 +5V 10 +12V B.
PC 5170 Flat Panel PC NOTE: The powe r from PW1 sho uld sup port at l east a 6.5A current for the P4 CP U. If the power ou tput is too low , the CPU m ay not function normally . Be sure the power from the powe r supply is suf f icie nt, and don’ t sha re thi s po wer with othe r device s, such as hard disk etc.
PC 5170 Flat Panel PC Appendix C C BIOS Configuration Options Page 169.
PC 5170 Flat Panel PC C.1 BIOS Configuration Options Below is a list of BIOS conf iguratio n options descri bed in Chapter 5 . Î System O vervie w ....... ...................... ...................... ...................... ...................... ...
Page 170 ACNODES ® Corp..
PC 5170 Flat Panel PC Î Parallel Port Mode [Normal]................ ........ ...... ..... ........ ...... ........ ...... ..... ........ ... 100 Î Parallel Port IRQ [I RQ7]........... ...... .. ... ...... .. ...... ... .. ...... ... ..... ... ... ..
PC 5170 Flat Panel PC Î PCI Latency Time r [64] .................. ......... ..... ........ ...... ..... ......... ..... ........ ...... ..... ... 115 Î Allocate IRQ to PCI VGA [Yes ] .............................. ...................... ...........
PC 5170 Flat Panel PC Î Resume on PME# [Disabled] .............. ..... ......... ..... ...... ........ ..... ......... ..... ...... ..... 135 Î Re sume On RTC A larm [Disabled].......... ......... ........... ........ ........... ........ ........ .
PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 174 ACNODES ® Corp..
PC 5170 Flat Panel PC Appendix D D Software Drivers Page 175.
PC 5170 Flat Panel PC D.1 Introduct ion The touch p a nel controller enabl es anal og resist ive touch p anels for four-wire, five-wi r e & eight-wire models. The co ntroller dire ctly co mmuni ca tes with the PC system th roug h the tou ch panel commun ication s in terface.
PC 5170 Flat Panel PC Figure D-1: Driv er CD Pop Up Screen Step 3: S ele ct t he o pera tin g sys tem in stall ed on the system from the menu on the left side of the screen. NOTE: The following description is for dri ver inst allation using a Win do ws 2000 OS.
PC 5170 Flat Panel PC Figure D-2: Install Shield Wizard Prep aration Step 5: After the Install Shield Wiza rd is rea dy , a welcome screen ap pears ( Figur e D-3 ). Figure D-3: Welcome Screen Step 6: Step 7: T o continue the installation process click N EXT .
PC 5170 Flat Panel PC Figure D-4: Install PS/2 Interface Driver Step 8: Four point cal ibration o ptions are then se lected. Four point cali brations can b e done every time a user boots up, during t he next time the system boots or never . Select when a four-p oint calibration sh ould be done.
PC 5170 Flat Panel PC Figure D-5: Install PS/2 Interface Driver Step 9: The user is then prompted to ensure the touch moni tor or the USB for the to uch controller is p lugge d into the system ( Figure D-6 ). On ce the touch controlle r is plugged into the syste m, cli ck OK .
PC 5170 Flat Panel PC Figure D-7: Cont roller Installation Directory Step 11: The user is then p rompted to select a fil e d irec tory in wh ich th e pr ogra m icons are saved ( Figure D-8 ). Th e default folder is “T ouchKit.” If a dif ferent folder must be used, select a folder from the list s hown.
PC 5170 Flat Panel PC Figure D-8: Program Icon Directory Step 12: The program then st a rt s inst alling ( Figure D-9 ). Figure D-9: Installing Page 182 ACNODES ® Corp.
PC 5170 Flat Panel PC Step 13: Once the pro gram is finish ed inst alling, the user is pro mpted to rest art the computer n ow or to rest art the computer later ( Figure D-10 ). Select when the computer sho uld be rest arted and click F INISH to complete the driver installation proced ure.
PC 5170 Flat Panel PC THIS P AGE IS INTENTIONALL Y LEFT BLANK Page 184 ACNODES ® Corp..
PC 5170 Flat Panel PC E Index Page 185.
PC 5170 Flat Panel PC A Applications ......................... ................ ......20 Arm Mountin g ..... ........... ............... ........... ..63 A TX 12 V Power Connector ......................167 A T X Power Connector ... ........... .......
PC 5170 Flat Panel PC L LAN RJ45 Connector......... ............. .........162 LCD Panel Connection .... ........... ...............66 LCD Panel L VDS In terface Connector ....164 LCD V oltage Setup ..................... ...............50 M Maintenance and Cl eaning .
Een belangrijk punt na aankoop van elk apparaat Acnodes PC 5170 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Acnodes PC 5170 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Acnodes PC 5170 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Acnodes PC 5170 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Acnodes PC 5170 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Acnodes PC 5170 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Acnodes PC 5170 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Acnodes PC 5170 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.