Gebruiksaanwijzing /service van het product PC 8172 van de fabrikant Acnodes
Ga naar pagina of 83
PC 8172 ® 17” TFT Expandable Intel ™ Core 2 Duo Industrial Panel PC with 2 PCI User’s Manual.
.
1 Disclaimers This manual has been ca refully checked and be lieved to contain accurate information. Acnodes Corp. assumes no re sponsibility for any infringements of patents or any third party’s rights, and an y liability arising from such use.
Safety Approvals m CE Marking m FCC Class A m FCC Compliance This equipment has been tested in c ompliance with the limits for a Class A dig ital device, pursuant to Part 15 of the FCC Ru les. These limits are meant to provide reasonable protection against harmful interference in a residential installation.
3 Safety Precautions Before getting started, please read the following important safety precautions. 1. The PC 8172 Series do es not come equipp ed with an operating system. An op erating s ys tem mus t b e load ed firs t before installing any software into the co mputer.
a Before handling a board or integrated c ircuit, touch an unpainted portion of the system unit chass is for a few seconds. This will help to dis charge any static electricity on your body. a When handling boards and components, wear a wrist- grounding strap, available fro m most electronic component stores.
Table of Contents D isclai mers .................................................... ................................................... .... ii S afety A pprov al s ........................................... .........................................
C h a p t e r 4 ............... .......................... .................. ...................... 61 4 . 1 S ys t em ..................... ........................ ........................... ................... 61 4 . 2 Tou ch S creen ............
MEMO vii i.
.
Introduction 1 PC 817 2 User ’ s Manual C h a p t e r 1 Introduction This chapter contains gene ral information and detailed specifications of the PC 8172 .
2 Introduction PC 817 2 User ’ s Manual 1.1 General Description The PC 8172 is a 17” Industrial panel PC which featur es Intel ® Core ™ 2 Duo processor and Intel ® Q965 chipset to provide powerful computing performance. This pan el PC also offers the expansion ability with two PCI slots.
Introduction 3 PC 817 2 User ’ s Manual 1.2 System Specifications 1.2.1 Main CPU Board a CPU ® f Socket LGA775 for Inte l Core TM 2 Duo/Core TM Solo Processo r with FSB 533/800/1066 M Hz , max up to E6400. NOTE It doesn’ t support the p rocessor with FSB 1333 MHz, and it is not recommended to use Quad-Core CPU.
4 Introduction PC 817 2 User ’ s Manual f One DV I- I Ou tput a Ethernet f First port with i82566DM Giga bit Ethernet PHY, Sec ond port with RTL8111B for Gigabit/Fast Ethern et a Audio f HD Audio fo.
Introduction 5 PC 817 2 User ’ s Manual a Heat Dispensing Design a Tw o slots for PCI expansion a Net Weight f 15 Kgs a Dimension (Main Body Size) f 450mm (17.
6 Introduction PC 817 2 User ’ s Manual 1.3 Dimensions This diagram shows you dimensions and outline s of the PC 8172..
Introduction 7 PC 817 2 User ’ s Manual 1.4 Front View and I/O Outlets 1.4.1 Front View Please refer to the following illustration for features and controls of the PC 8172 front bezel.
8 Introduction PC 817 2 User ’ s Manual 1.4.2 I/O Outlets The following figure shows the I/O loca tions of the PC 8172 . No Connecto r No Conn ector 1 COM1 (RS-232/422/485) 7 COM 2 & COM 3 (RS-232) 2 DVI-I 8 Power Sw i tch 3 Giga LAN x 2 9 AC pow er 4 IEEE 1394a x 2 10 PCI slots x 2 5 USB v2.
Introduction 9 PC 817 2 User ’ s Manual 1.5 Package List The package bundle d with your PC 8172 should co ntain the following items: a PC 8172 x 1 a AC power cord x 1 a Panel mount kit x 7 a Driver CD x1 a LGA 775 CPU Cooler x 1 a DVI TO VG A Adapto r x 1 a PS/2 Splitter – Y Cable x 1 a SATA Cable x 1 a Dual 3.
10 Introduction PC 817 2 User ’ s Manual MEMO.
.
PC 817 2 User ’ s Manual 12 Hardware Installation C h a p t e r 2 Hardware Installation The PC 8172 is convenient fo r your various hardware configurations in flexible ways, such a s CPU (Central Proces sing Unit), HDD (Har d Disk Drive), Memory Module (DRAM), CD- ROM, Add-On card, and more.
PC 817 2 User ’ s Manual Hardware Installation 13 Step 1 Unscrew screws to remove the rear chassis. Step 2 Remove the riser card fix kit..
PC 817 2 User ’ s Manual 14 Hardware Installation Step 3 Install the CPU and DDR DRA M in the PC 8172. DRAM CPU.
PC 817 2 User ’ s Manual Hardware Installation 15 2.2 Installing the Hard Disk Drive The PC 8172 offers a c onvenient drive bay module for users to install HDD. The system offers users one 3.5” Hard Disk Drives for installation. If you want to install dual 3.
PC 817 2 User ’ s Manual 16 Hardware Installation Step 4 Fix the Hard Disk to the HDD bracket and connect the cable to complete the installation. (4-1) (4-2) ¤ Installing Dual 3.5 ” HDD If installing the dual 3.5” HDD, please follo w the steps: Step 1 Change HDD bracket from 3.
PC 817 2 User ’ s Manual 17 Step 2 Fix the Hard Disk to the HDD br acket to complete the installation. Hardware Installation.
PC 817 2 User ’ s Manual 18 Hardware Installation Note When installing Dual 3.5 ” HDD, users must install a fan to decrease sys tem heat. Installation step as following: ¤ Installing fan w hen using dual 3. 5 ” HDD Step 1 Screw the fan to the right side of cover.
PC 817 2 User ’ s Manual Hardware Installation 19 (1-2) (1-3) Step 2 Connect power cable of fan to 3 pin fan connector (CN3) in motherboard..
PC 817 2 User ’ s Manual 20 Hardware Installation (2-1) . (2-2) ¤ Installing 2.5 ” HDD If installing the 2.5” HDD, please follow the steps: Step 1 Change HDD rubber of HDD bracket from 3.
PC 817 2 User ’ s Manual Hardware Installation 21 Step 2 Fix the Hard Disk to the HDD br acket to complete the installation..
PC 817 2 User ’ s Manual 22 Hardware Installation 2.3 CD-ROM Installation The PC 8172 offers a convenient drive bay module for user s to install CD-ROM. When ins talling the CD-ROM, refer to the following instructions and illus tration: Step 1 Unscrew scre ws to remove the rear chassis.
PC 817 2 User ’ s Manual Hardware Installation 23 2.4 Add-on Card Installa tion The PC 8172 provides a riser c ard for PCI slots expansion. The riser card assembly can acc ommodate both half-size expansion cards. To install the riser card, refer to the following figure and ins tructions below: Step 1 Remove the rear chassis.
PC 817 2 User ’ s Manual 24 Hardware Installation Step 4 Insert the add-on card in the socket firmly until it is completely se ated..
PC 817 2 User ’ s Manual 25 2.5 Serial Port Interface The PC 8172 has four onbo ard serial ports, COM1, COM2, COM3, COM4 are RS-2 32 Port Connector. The connector, COM1, COM2 , COM3 are DB-9 connector, and the following table shows the pin as signments of this c onnector.
PC 817 2 User ’ s Manual 26 Hardware Installation Pin Signal Pin Signal 21 22 NC Ground 23 24 TXC+ TXC- C1 C2 CRT-RED CR T-GREEN C3 C4 CRT-BLU E CRT-HSY NC C5 VGAGND NOTE It doesn’t support display in LCD a nd DVI-D simultaneously. DVI-D is only available after booting up in Windows XP.
PC 817 2 User ’ s Manual Hardware Installation 27 2.7 Ethernet The PC 8172 provides a NE2000 compatible Ethernet (RJ-45) interfaces. For network co nnection, just p lug in one cable end o f the system’s 10/100/1000-Ba se-T Hub into a standard RJ-45 conne ctor.
PC 817 2 User ’ s Manual 28 Hardware Installation 2.8 Mountings Way – Panel/ Rack There are two mounting ways available for the PC 8172 system: Panel and Ra ck mounting.
PC 817 2 User ’ s Manual Hardware Installation 29 2.8.2 Rack Mounting The PC 8172 also suppor t rack mounting. The rack mounting kit is optional. Please refer to the follo wing procedure. 1. Fix five sc rews ea ch side. 2. Complete the rack mounting.
30 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l C h a p t e r 3 Phoenix-Award BIOS Utility The Phoenix-Award BIOS provides users with a built-in Set up program t o modify basic system configuration.
Phoeni x -A w ard B I OS U t ilit y 31 PC817 User ’ 2 s Manua l 3.2 Control Keys Move cursor t o the pr evious item Up arrow Move cursor t o the next item Down arrow Move cursor to the item on the l.
32 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l 3.4 The Main Menu Once you enter the Award BIOS CMOS Setup U t ility , the Main Menu appears on the screen. In t he Main Menu, there are several Set up f unctions and a couple of Exit options f or your selec t ion.
Phoeni x -A w ard B I OS U t ilit y 33 PC817 User ’ 2 s Manua l 3.5 Standard CMOS Setup Menu The Standard CMOS Setup Menu displays basic informati on about your system. Use arrow keys to highlight each item, and use <PgUp> or <PgDn> key t o select t he value you want in each item .
34 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l a IDE Primary Master/Primary Slave These item s identify the t ypes of each I DE channel installed in the comput er. There are 45 predefined t ypes (Typ e 1 t o Type 45) and 2 user’ s definable t ypes (Type User) for Enhanced I DE BIOS.
Phoeni x -A w ard B I OS U t ilit y 35 PC817 User ’ 2 s Manua l Pre ss <Esc> t o return to t he Main Menu page. 3.6 Advanced BIOS Features This section allows you t o configure and improve your sys t em, to se t up some system fea t ures according t o your preference .
36 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l a CPU Feature Scr ol l to t his item and press <Enter> t o view t he CPU Feature sub menu. a Hard Disk Boot Priority Scroll to t his item and press <Enter> t o view the sub menu to decide t he disk boot priority .
User ’ PC817 2 s Manua l a Virus Warning This option f lashes on the screen . During and after t he sys t em boot up, any a tt empt to write to the boot sector or partition t able o f the hard disk drive will halt the system wi t h t he following message.
PC 817 2 User ’ s Manua l 38 Phoeni x - Award BIOS Util i t y a First / Second/Third Boot Dev i ce These item s le t you selec t the 1st, 2nd, and 3rd devices t hat the system will search for during its boot-up sequence. The wide range of selection includes Floppy , LS120, ZIP100, HDD0~3, SCS I, and CDROM.
User ’ PC817 2 s Manua l a Typematic Rate (Chars/Sec) This option refers t o charac t er numbers typed per second by t he keyboard. The default value is “6” .
40 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l Use this i t em t o enable or disable APIC (Advanced Programmable Interrupt Controller) mode t hat provides symmetric multi- processing (SMP) f or sys t ems . a MPS Version Contro l For OS This item specifies the vers ion of t he Multiprocessor Specification (MPS).
Phoeni x -A w ard B I OS U t ilit y 41 PC817 User ’ 2 s Manua l 3.7 Advanced Chipset Features This section contains completely optimized chipset’s f eatures on the board t hat you are strongly rec.
42 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l a PCI Express Root Port Func Scroll t o t his item and press <Enter> t o view t he sub menu to decide t he PCI Express Port. Pre ss <Esc> t o return to t he Adv an ce d Chipse t Featurs page.
Phoeni x -A w ard B I OS U t ilit y 43 PC817 User ’ 2 s Manua l a Boot Display This item is for I ntel define ADD card only . Pre ss <Esc> t o return to t he Main Menu page. 3.8 Integrated Peripherals This section allows you t o configure your SuperIO Device, I DE Function and Onboard Device .
44 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l a OnChip IDE Dev i ce Scroll to this item and press <Enter> to view t he sub menu OnChip IDE Devic e. ¤ I DE HDD B l ock Mode Block mode is also called block trans f er, multiple commands, or multiple sector read/write .
Phoeni x -A w ard B I OS U t ilit y 45 PC817 User ’ 2 s Manua l Mas t er/Slave PIO items on the menu. ¤ I DE Master/Slave PIO The f our I DE PIO (Programmed I nput/Ou t put) f ields le t you se t a PIO mode (0-4) f or each of the f our IDE devices t hat the onboard I DE interf ace supports .
46 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l a Super IO Dev i ce Scroll t o this item and press <Enter> t o view the sub menu Super IO Device. ¤ Onboard FDC Controller Select Enabled if your sys t em has a f loppy disk controller (FDC) ins t alled on t he sys t em board and you wish to use it .
Phoeni x -A w ard B I OS U t ilit y 47 PC817 User ’ 2 s Manua l ¤ Para ll e l Port Mode Select an operating mode for t he onboard parallel (printer) port . Select Norma l unless your hardwar e and software require one of the other modes offered in this field.
48 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l 3.9 Power Management Setup The Power Management Setup allows you t o save energy of your sys t em effectively . It will shu t down t he hard disk and t urn OFF video displ ay after a period of inac t ivit y .
User ’ PC817 2 s Manua l a ACPI Function This item allows you t o enable/disable t he Advanced Con f igura t ion and Power Management (ACPI ) . The f unction is always “ Enabled ”. a ACPI Suspend Ty pe This item specifies t he power saving modes for ACPI func t ion.
PC 817 2 User ’ s Manua l 50 Phoeni x - Award BIOS Util i t y to restore t he sys t em when a “wake up” event occurs . a Run VGABIOS if S3 Resume When t his item is set Auto , the system will run VGA BIOS if it is reaumed from the S3 s t ate.
User ’ PC817 2 s Manua l connec t the fax / modem to the board Wake On Modem connector for working t his f eature. a Suspend Mode After the selec t ed period of system inactivity (1 minute t o 1 hour), all devices except the CPU shut of f. The default value is “Disabled” .
52 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l ** Reload Global Timer Events ** Global Timer (power management) events can preven t the syst em f rom entering a power saving mode or can awaken t he sys t em f rom such a mode. a Primary / Secondary IDE 0/1 Use this item to configure t he IDE devices monitored by t he sys t em.
Phoeni x -A w ard B I OS U t ilit y 53 PC817 User ’ 2 s Manua l 3.10 PnP/PCI Configuration Setup This section describes configur ing t he PCI bus system. PCI, or Personal Computer I nterconnec t, is a sys t em which allows I/ O devices t o operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.
54 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l interrupt t o one of t he following types in accordance with t he t ype of devices using t he interrupt: 1. Legacy ISA Devices compl i ant with the original PC AT bus specification, requiring a specifi c inte rrupt (such as IRQ4 for serial port 1).
Phoeni x -A w ard B I OS U t ilit y 55 PC817 User ’ 2 s Manua l 3.11 PC Health Status This section supports hardware monitering t hat lets you monitor t hose parameters f or critical voltages , temperatures and f an speed of t he board. a Shutdow n Temperature It helps you set t he maximum temperature they sys t em can reach before powering down.
56 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l 3.12 Frequency /Voltage Control This section is t o control t he CPU frequency and Supply Voltage, DIMM OverVoltage and AGP voltage. a CPU Clock Ratio Use this item t o select t he CPU’s f requency.
Phoeni x -A w ard B I OS U t ilit y 57 PC817 User ’ 2 s Manua l 3.13 Load Opt imized Defaults This option allows you t o load t he default values to your sys t em configuration. These default set t ings are opti mal and enable all high performance features.
58 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l 3.14 Set Supervisor/User Password You can se t either supervisor or user password , or both of then. The di ff erences between are : 1. Supervisor password: can enter and change the options of t he setup menus.
Phoeni x -A w ard B I OS U t ilit y 59 PC817 User ’ 2 s Manua l 3.15 Save & Exit Setup This allows you t o determine whether or not t o accept the modifications. Typing “Y” quits t he se t up utility and sav es all changes into the CMOS memory .
60 Phoeni x - Award BIOS Util i t y PC 817 2 User ’ s Manua l 3.16 Exit Without Saving Sel ec t t his optio n to exit the Setup utility withou t saving the changes you have made in t his session. Typing “Y” will quit t he Setup utility without saving t he modifications.
Phoeni x -A w ard B I OS U t ilit y 61 PC817 User ’ 2 s Manua l MEMO.
PC 817 2 User ’ s Manua l 62 Driver Installation C h a p t e r 4 Driver Installation 4.1 System PC 8172 supports Windows 2000/XP/Vista. To f acilitate t he ins t allation of t he system driver, please carefully read the instruc t ions in t his chapter before start ins t alling.
User ’ PC817 2 s Manua l Driver Insta l l ation 63 4. 2 Touch Screen 4.2.1 Specificat ion Touch Scre en 5-w ire Analog Resistive ty p e Touch Scree n Controller DMC9000 (10-bit A/ D converte r insid.
PC 817 2 User ’ s Manua l 4.2.2 Driver Installation – Windows 2000/XP/Vista The PC 8172 provides a driver of the t ouch screen t hat users can install it under operating system Windows 2000/XP/Vista.
User ’ PC817 2 s Manua l Driver Insta l l ation 65 4 . Sel ec t t he “Standard Calibrate” t ab..
PC 817 2 User ’ s Manua l 66 Driver Installation 5. Calibration: To adjust the display with t ouch panel , click “Calibration” and follow the calibrate point t o do calibration; t here are f ive poin t s on screen f or calibration. 6. Pres s OK.
User ’ PC817 2 s Manua l Driver Insta l l ation 67 4.2.3 Driver Installation - DOS ¤ Using “ I NSTALL.EXE” Utility to Install PenMount Softw are Dr i ver 1 . Insert Driver CD and selec t the Panel series P1173- 841DriverStep5 - TouchDriverDOS I nstall.
PC 817 2 User ’ s Manua l 68 Driver Installation C:PENMOUNTPMDETEC T -N5 -N9 ¤ Do Cal i bration 1 . To adjus t t he touch screen mapping properly t o displ ay screen, use PM.BAT (C:PENMOUNTPM) to do calibration. Choose “1” DO CALIBRATION (adjust scre en mapping).
User ’ PC817 2 s Manua l Driver Insta l l ation 69 MEMO.
PC 817 2 User ’ s Manua l 70 Power Suppl y S p ec i f icat ion A p p e n d i x Power Supply Specification Power Supply FSP250-50GU B (250W, AC100~240V Input) 1.
User ’ PC817 2 s Manua l Power Suppl y Specificat i on 71 LOAD CAPACITY SPECIFICATIONS The cross regulation defined as f ollows , t he voltage regulation limits DC include DC Output ripple & noise . LOA D +3.3V +5V +12V -12V +5V SB Condition_1 X X X X 2A Condition_2 0.
PC 817 2 User ’ s Manua l 72 Power Suppl y S p ec i f icat ion SHOR T CIRCU I T PROTECTION Output short circuit is defined to be a short circuit load of less t han 0 . 1 ohm . I n the event of an output short circuit condition on +3.3V, +5V or +12V output , t he power supply will shutdown and latch of f.
User ’ PC817 2 s Manua l Power Suppl y Specificat i on 73 f Vibration: 0.25G, 10~250Hz f Shock: -40G, 11mSec f or Storage, -10G, 11mSec for operating 4. Reliabil ity The power supply reliability , when calculated by MIL- HDBK;lates t revision, are exceed 100,000 hours with all output at maximum load and an ambient t emper ature of 25 ℃ .
Een belangrijk punt na aankoop van elk apparaat Acnodes PC 8172 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Acnodes PC 8172 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Acnodes PC 8172 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Acnodes PC 8172 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Acnodes PC 8172 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Acnodes PC 8172 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Acnodes PC 8172 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Acnodes PC 8172 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
