Gebruiksaanwijzing /service van het product Colorado CM168 van de fabrikant Blaupunkt
Ga naar pagina of 30
.
ThummerTM III Steering Wheel Remote Control (sold separately) Commande 5 distance ThummerTM III (optionnelle) Funcionamiento del control remoto ThummerTM III (optional) Funcionamento do Controle Remot.
Display The display consists of three fields and varies according to the operating mode and function. Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e.
Contents Display ........................................... 3 Quick reference ............................. 5 ThummerTM III Remote control operation (optional). ................... 8 Important notes ............................. 9 What you need to know .
Quick reference @ REL To release the detachable panel (theft protection). Press this knob and remove the re- lease panel. I ON - Power up/down Press this button to turn the unit on. It will play at the volume set under DSC. Mute: If you press this button briefly during radio reception, the volume will turn down instantly.
Press the button indicating the oppo- site direction, Qb or A/V to stop tape winding. Chanaer mode (optional) Select CD A UP V Down Select track >> Up: press briefly CUE - fast forward (audible): hold button down. c< Down: press two or more times briefly Repeat track: press once briefly.
Cassette mode Press this button to switch between the track played and the clock. Chanaer mode (optional) Press this button to switch the display of the CD Name, CD number, the playback time elapsed and the clock. @ Preset buttons 1 to 6 Radio mode You can store six stations in each FM memory bank (1, 2, and ‘7”).
@ Preset Scan Press PS. “PS Scan” will appear in the display, followed by the station symbol (flashing). The stations stored onthe station pre- set buttons and within reception range will be scanned. You can set the scan time in DSC pro- gramming.
Important notes What you need to know Installation Before using your new car radio, please read through the following information care- fully. Traffic safety If you would like to install your new car ra- dio yourself or add other audio components to existing ones, please read the enclosed instructions on installation and connection ’ carefully.
Detachable face Theft protection This unit is equipped with a detachable face. A car radio without face is worthless for thieves. Protect your car radio and detach the face when you leave your car. It is very easy to attach and detach the detachable face.
Radio operation Selecting a waveband W ith this car radio you can select between the following wavebands: FM 87.5 - 107.9 MHz AM 530- 1710 kHz l Select the desired waveband by pressing the BNTS button. Station tuning Automatic seek tuning A/V l Press A or V ; the car radio will auto- matically search for the next station.
The preset station indication (e.g. Pl) will will flash in display field 1. Listen to scanned station/end Preset Scan: l Press PS briefly. Scanning stations with Radio Scan You can scan through all of the stations in your reception area. To start the Scan function: l Press SCA briefly.
l Now you are in the edit mode. If the station selected does not have a name, 8 dashes “_” will appear in the display. l The cursor will flash at the current po- sition. Press cc >> to move the cur- sor. l Press A/V to select the station you would like to delete.
Cassette deck operation Cassette playback Insert the tape into the slot with the open side showing to the right. “CASSETTE” will appear in the display. The tape will play in the direction “TAPE 1”. If a tape is already inside, press SRC to select “CASSETTE” mode.
DOLBY B NR (Noise reduction) Cassettes which have been recorded with the DOLBY B NR system exhibit consider- ably less tape noise and higher dynamics. To play properly cassettes recorded using this system, press 00 . 00 will light up in display field 3.
A I v CD selection A UP V Down CD Select-By-Name If you have named a CD and it has been selected at least once since the magazine was inserted, the name is seen immediate- ly, so that you can easily find the desired CD. Selecting a track >> Up: Press briefly.
Deleting CD names Deleting one CD name Proceed as follows: Select DSC programming mode. Naming CDs To allow you to identify your CDs more quickly, you can use DSC programming to enter individual names for up to 99 CDs. The names can have up to 7 characters.
Deleting all CD names All of the CD names stored in the CD chang- er will be deleted. Select DSC programming mode. l Press DSC. l Press h/v to select CDC_NAME.
Turn On Message DSC programming This unit offers you the possibility to enter a turn on message of up to 40 characters. The message will briefly appear in the dis- play each time you turn the unit on. Proceed as follows: Select the DSC mode. Press DSC.
CDC NAME CLOCK 12 CLOCKSET TIMER 1 TIMER 2 ON VOL Names CDs. A maximum of 99 CDs can be given names of up to 7 charac- ters. Switches between 12-h and 24-h clock display. Sets the clock manually. Press -z-z >> to select hours/minutes. Press V/A to adjust the flashing value.
Specifications ._ Overview of the DSC factory settings LOUDNESS BAS CENT SENS STA NAME CDC NAME CLOCK CLOCKSET TIMER 1 TIMER 2 ON VOL TOM MUTE BEEP RM SCANTIME BL SKIP AUX AUX NAME DISP Amplifier 17 watts per channel minimum continu- 3 50 Hz ’ ous average output into 4 ohms.
Troubleshooting Guide The following check will assist in the correction of most problems which you may encounter with your unit. Before going through the check list below, refer back to the connection and operating procedures. General Trouble No sound.
Error Displays Trouble Cause . Solution “CD ERR” “NO DISC” A disc such as an upside down or dirty disk, or a CD-ROM (computer) disc. No magazine or disc in changer Insert the disc correctly. Clean the disc. Take out the magazine and insert the disc.
- ~ -- _ Bosch Group Arizona CM 148 Colorado CM 168 Florida RD 168 Nevada RDM 168 INSTALLATION INSTRUCTIONS Alaska RDM 168 SAFTEY NOTES & GENERAL RECOMMENDATIONS . A I To avoid costly mistakes and serious damage, please carefully read all of the instructions .
6. 7. 8. 9. Connect the black (power ground) lead to a grounded metal part on the vehicle. We recommend grounding all audio system black ground leads (receiver, changer,-additional amplifiers, etc.) to a common grounding point, preferably a non-painted surface under the instrument panel.
SPEAKER 81 AMPLIFIER CONNECTIONS The receiver’s Dual-Level Fader allows you to fade between the front and the rear channels using the receiver’s internally-amplified output via front and/or rear s.
Connecting Additional Amplifiers or an Equalizer to the Receiver’s Preamp Output Obtain the Blaupunkt RCA 4-channel preamp output adapter 7 607 893 093 from your dealer. It includes a blue/white trigger lead for switching the amplifier on and off. Connect the adapter into the top left section of the connector block on the back of the receiver.
INSTALLATION INSTUCTIONS Recommendations . l Carefully choose the mounting location so that the receiver won’t interfere with normal driving. l Avoid mounting locations where the receiver would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration.
Installing the Receiver in a Japanese Car This receiver is designed for easy installation in most popular Japanese cars that have “ISO” (side- bracket) mounting system. If you have questions, ask your Blaupunkt dealer. 1. 2. 3. 4. 5. Remove the vehicle’s “bezel” trim piece and the remove the existing radio.
Cleaning the Connectors The receiver may not operate properly if the connectors between the receiver and the detachable face are contaminated with dirt. To clean the connectors, use a cotton swab and isopropyl alcohol (90% or higher). Be sure to clean them with a vertical motion.
Een belangrijk punt na aankoop van elk apparaat Blaupunkt Colorado CM168 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Blaupunkt Colorado CM168 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Blaupunkt Colorado CM168 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Blaupunkt Colorado CM168 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Blaupunkt Colorado CM168 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Blaupunkt Colorado CM168 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Blaupunkt Colorado CM168 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Blaupunkt Colorado CM168 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
