Gebruiksaanwijzing /service van het product GSN 9487 XSP van de fabrikant Blomberg
Ga naar pagina of 43
Dishwasher Instruction Manual.
Please read this user manual first! Dear Customer , We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
CONTENTS Dishwasher 1. 3 Important 2. safety instructions 5 General safety 5 Intended use 5 Children’s safety 6 Installation 3. 7 Appropriate installation location 7 Connecting water supply 7 Connec.
3 EN 1 Dishwasher Overview 1. Upper basket with rack 2. Upper impeller 3. Lower impeller 4. Filters 5. Lower basket 6. Control panel 7. Door 8. Detergent dispenser 9. Silverware basket 10. Lower impeller slot 1 1. Salt reservoir lid 12. Upper basket rail 13.
4 EN T echnical specifications This product complies with the following EU directives: Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations.
5 EN 2 Important safety instructions This section contains safety instructions that will help to get protected from risk of personal injury or property damage Failure to follow these instructions shall void all warranties.
6 EN This product should not be • used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.
7 EN 3 Installation Refer to the nearest Authorised Service Agent for installation of your product. T o make the product ready for use, make sure that the electricity , tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent.
8 EN Connection to the drain W ater discharge hose can directly be connected to the drain hole or sink’s drainage. The length of this connection must be min. 50 cm and max. 100 cm from the floor . 101 1 Open the taps completely after making the connections to check for water leaks.
9 EN Adjusting the feet If the door of the product cannot be closed properly or if the product swings when you push it slightly , then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the installation manual supplied with the product.
10 EN detergent while the machine is empty . During the initial use, fill the salt reservoir with 1 litre of water prior to filling it with salt. C Some water might have remained in the product due to the quality control processes in the production. It is not harmful for the product.
11 EN 4 Prewashing Tips for energy saving Following information will help you use the product in an ecological and energy-efficient manner . • Wipe away any coarse food remnants on the dishes before putting them in the product. • Operate the product after filling it completely .
12 EN 1012 Adding salt W ater softening system needs to be regenerated in order for the product operates with the same performance continuously . Dishwasher salt is used for this purpose. C Use in your product only the special softening salts produced particularly for use in dishwashers.
13 EN 1014 1014 Put the detergent into the detergent dispenser just before operating the machine as illustrated below . 1. Push the latch to right to open the detergent dispenser lid (A).
14 EN 2222 rinse aid and water softening salt individually . C Information about suitable places (detergent dispenser , basket etc.) in the dishwasher to place the tablet can be found amongst the usage instructions on the packages of the tablet detergents.
15 EN 1013_redaksiyon 1013_redaksiyon Rinse aid C The rinse aid used in dishwashers is a special combination used to increase drying efficiency and prevent water or limescale stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only .
16 EN time. We strongly recommend you to check if the tableware you are going to purchase is suitable for washing especially in the dishwasher . Placing the dishes into the dishwasher Y ou can use your dishwasher in the optimum way with respect to energy consumption and washing and drying performance only if you place the dishes in an orderly way .
17 EN Suggestions for loading the dishwasher Lower basket Upper basket Improper Loading Of Dishware Improper Loading Of Dishware.
18 EN 2555 4-3B T all T ub cutlery basket 1029_redaksiyon Silverware basket (depends on the model) Silverware basket is designed to wash your dishes such as fork, spoon and etc. in a cleaner manner . Silverware basket piece (depends on the model) Y ou can place your forks, spoons and etc.
19 EN 1017 1020 larger spaces by folding each wire individually or all of them at once. Lay the foldable wires down by pressing on the latch (A).
20 EN 1023 1019 Lower basket multipurpose / height adjustable service rack (depends on the model) This accessory located at the lower basket of the machine allows you to easily wash pieces such as extra glasses, long ladles and bread knives.
21 EN 1025 1026 Upper basket drawer (depends on the model) Y ou can easily place additional desert spoons, small forks and knives into the basket drawer installed to the upper basket of your machine.
22 EN 1021 eps of the loaded basket in up or down directions without removing it from the machine. T o raise the basket: 1. Grab one of the upper basket wires (right or left) and lift it up (A). (1). Place your larger dishes into the area created (2).
23 EN 1065 eps 2. Repeat the same process to raise the other side of the basket. 3. Make sure that both sides of the basket height adjustment mechanism are at the same level (down or up). T o lower the basket: 1. Press the latch on the basket adjustment mechanism (right or left) to lower the basket (B).
24 EN 1022 eps Adjusting the height of empty upper basket (depends on the model) Y ou can adjust the height of the upper basket according to the size of the dish to be washed. Use basket rollers to change the basket height. 1. T urn the stoppers on the ends of the upper basket rails by turning them aside (A).
25 EN � Since it can be removed from the machine easily , it allows taking out the dishes from the machine together with the basket after they are washed. It is compatible with all standard drawer sizes and can be placed into kitchen drawers and racks.
26 EN 5 Program Selection and Operating Y our Machine 1. On / Off Button 2. Start/Pause/Cancel Button 3. Display 4. Program Selection Button 5. Half Load/T ablet Detergent Button 6. Delayed Start Button 7. Handle 8. Program Indicator 9.
27 EN Button and Button Descriptions On / Off Button (1) When you press the On/Off button, the display switches on with the last program used and it dims when you turn the machine off.
28 EN T o use the Half Load and T ablet Detergent functions concurrently , turn on your machine by pressing the On / Off button and then press the Half Load / T ablet Detergent button until Half Load and T ablet Detergent Indicators illuminate together .
29 EN Program indicator 15 c lights up when the program is over . Remaining T ime Indicator ( 3 ) displays “0:00”. Canceling a Program Press Start / Pause / Cancel button ( 2 ) for three seconds to cancel a program that is already running. Release the button when symbol ( 12 ) start flashing in the display .
30 EN of minutes the machine will fulfill the necessary operations required for cancellation. Remaining time indicator ( 11 ) displays “0:00”. Y ou may select and operate a new program following the delayed start countdown cancellation process.
31 EN close its lid. • Press On/Off button. • Check if the salt and rinse aid warning indicators ( 9 , 10 ) light and add salt and/or rinse aid if needed. • Determine your washing program with the aid of the Program Data and T able of Average Consumption V alues.
32 EN Programme T able Programme number 1 2 3 Reference* 4 **** 5 6 7 8 Programme name Cleaning temperature Degree of Soiling Suitable for removing the remnants on the soiled dishes that will be kept waiting in the machine for a few days, and thus, for preventing the bad odor buildup.
33 EN 1. T urn the micro filter (3) and coarse filter (2) assembly counter clockwise and pull it out from its seating (A). 6 Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals.
34 EN 4. Clean all three filters under tap water by means of a brush. 5. Replace the metal/plastic filter . 6. Place the coarse filter into the microfilter . Make sure that it is properly seated. T urn the coarse filter clockwise until a “click” sound is heard.
35 EN 1032 Upper impeller Check if the holes on the upper impeller (2) are clogged. If they are clogged, remove and clean the impeller . T urn its nut to left to remove the upper impeller (C, D). Make sure that the nut is tightened well when installing the upper impeller .
36 EN T roubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • W ater is cut. >>> Make sure that the water inlet tap is open.
37 EN Dishes are not dry at the end of cycle • Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no water will accumulate in them. • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary .
38 EN Lime traces remain on dishes and glassware gains a misty appearance • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary . Increase the rinse aid setting if there is enough amount of rinse aid in the machine.
39 EN Rust, discoloration or surface deterioration occurs on dishes • Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. Pay attention not to spill salt around the salt filling hole while adding salt. Make sure that the salt reservoir lid is tightly closed after finishing the filling process.
40 EN Detergent remains in detergent dispenser . • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process.
41 EN A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>> Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
EN 17 9251 01 00_AG.
Een belangrijk punt na aankoop van elk apparaat Blomberg GSN 9487 XSP (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Blomberg GSN 9487 XSP heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Blomberg GSN 9487 XSP vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Blomberg GSN 9487 XSP leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Blomberg GSN 9487 XSP krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Blomberg GSN 9487 XSP bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Blomberg GSN 9487 XSP kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Blomberg GSN 9487 XSP . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
