Gebruiksaanwijzing /service van het product ACT-IR220L van de fabrikant ACTiSYS
Ga naar pagina of 36
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 1 ACT-IR220L+/220L/200L IrDA PC Adapter User’s M anual ACTiSYS Cor p. 48511 W arm Springs Blv d, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX : (510) 623-7268 E-Mail: irda-support@actisys.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 2 FCC & VCCI Compli ance Statement This device complies with part 15 of the FCC Rules.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 3 CONTENTS CONT ENT S .....................................................................................................................
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 4 INTRODUCTION This document pr ovides instr uct ions t o install the ACT I R220L+/220L/200L Serial-I R dong le along with W indow s 98/ME/2000 device driver.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 5 WINDOWS 98 INSTA LLA TION GUIDE Precaution : If you have not verified your Bios setup at t his point, we strongly recomm end you to refer back to t he Bios verif ication section and verify your Bios setup ag ain.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 6 8. Select No, the d ev ice isn’t in the list in the box. Then click Next . 9. Highlig ht Infrared Devices f rom the Hardw are ty pes list, then click Next .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 7 11. From M anufacturers list, choose (Infrared COM port or dongl e) , f rom Inf rared Devices list, choose (G eneri c I nf rared Seri al Port or dongle) .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 8 14. Select COM port which is physically connected to the D ongle. In mo st cases, the D ongle i s connected to COM2. Choose Communication Port (COM2 ) from the Po rt list, cl ick Next .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 9 WINDOWS 98 UNINSTA LLA TION GUIDE 1. Boot up your computer system. 2. Click Control Panel . 3. Double click Sy stem Icon 4. Click Device Manager tab.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 10 7. Highlight (Generic Infrared Serial Port or Dongle) , then click Remov e . 8. Click OK in the Confirm Device Removal . 9. Cli ck on OK to restart y our computer.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 11 WINDOWS 2000 INSTA LLA TION GUIDE Note : If you do not chang e your com put er BI OS setting, STOP her e and g o to Chapter BI OS SETUP.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 12 7. Highlig ht A DD a new dri ve then click Next . 8. Choose No, I w ant sel ect the hardw are f orm a list then click OK 9. Select the Infrared device f r om the Hardw are ty pes .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 13 10. From Manufact urers list, choose AC T i S Y S , fro m Infrared Device list, choose A CTiSYS IR-200L Serial I nf r ared Device f or IR200L; click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 14 13. Cli ck Next> . 14. Choose COM2 in m ost case, then click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 15 WINDOWS 2000 UNIST A LLA TION 1. Startup your computer system. 2. Click on Control Panel . 3. Double click Sy stem Icon. 4. Cli ck on Hardw a re tab, then click Dev ice Manager button.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 16 7. The device has been uninstal led and close devic e manager, restar t your computer .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 17 WINDOWS ME INSTA LLA TION GUIDE Precaution : If you have not verified your Bios setup at t his point, we strongly recomm end you to refer back to t he Bios verif ication section and verify your Bios setup ag ain.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 18 8. Choose No I w ant to select t he hardw are from a list , then click Next> . 9. If you can not find Inf rared device fr om Hardware types list, choose Other devices from th e Hard ware ty pes list, then click Next >.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 19 12. Double click Add New Hardw are icon. 13. Click Next >. 14. Cli ck Next >. 15. Choose No I want select the hardware from list , then click N ext>.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 20 16. High light Infrared device fr o m H ardware ty pes list . Then click N ext> 17. Click Next > . 18. Click Next> 19. If your dev ice is IR200L, choose A CTiSY S IR200L , click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 21 20. If your dev ice is phy sically connected to COM2, highligh t Communications ports (COM2), then click Next> . 21. Click Next > .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 22 WINDOWS ME UNINSTA LLA TION GUIDE 1. Double click Sys te m System System Sys te m icon on C on trol Pa nel Control Panel Control Panel Control Panel.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 23 WINDOWS XP INSTA LLA TION GUIDE 1. Hig hlight My Computer , righ t click 2. Highlight Properties , lef t click 3. Click A dd New Hardw are Wizard .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 24 4. Click Next . 5. Choose Yes , I have already …………….
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 25 7. Choose A dd a new hardw are device , t hen click Next > . 8. Choose install th e hardware that I ma nually select from a list (Advanced ), then click Next .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 26 10. Choose respective ACT model, t hen click Next> 11.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 27 13. Click Fini sh.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 28 WINDOWS XP UN-INSTA LLA TION GUIDE 1.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 29 4. Highlight t he items under Infr ared device , then right click . 5. Click Uninstall 6. Click OK , you have successfully uninstalled the device on your sy stem.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 30 7. Click OK , you have successfully uninstalled the device on your sy stem.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 31 TROUBLE SHOOTING For help on gener al and m iscellaneous pr oblem s you may be experiencing with your printing , refer to the following pag es f or possible solutions.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 32 SPECIFICA TIONS Model : ACT-I R220L+/ACT-IR220L/ ACT-IR200L Carrier : Inf r ar ed r adiation (peak wavelength: 850 t o 1050nm) Sub-Carrier : 500 KHz for SHARP ASK- I R and ASK(37KHz) for T V remot e spec.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 33 Pin A ssignments : Serial I nt er face DB9 f emale connector Pin Name Sy mbol I/O Fun.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 34 WA RRA NTY INFOMA TION THE FOLLO W ING W ARRANT Y G IVES YOU SPECI FI C LEGAL RIGHT S. YOU MAY ALSO HAVE OTHER RIGH TS W HICH VA RY F ROM STATE TO STATE.
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 35 ACTiSYS Corporat ion warrant s t o the fir st consumer purchaser, f or a period of 1 .
ACTiSYS Corp. Serial-IR Dong le Installat ion Manual Release 1.5 ACTiSYS Corporat ion 2001 All Rights Reser ved 36 CONTA CT INFORMA TION A CTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.
Een belangrijk punt na aankoop van elk apparaat ACTiSYS ACT-IR220L (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ACTiSYS ACT-IR220L heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ACTiSYS ACT-IR220L vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ACTiSYS ACT-IR220L leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ACTiSYS ACT-IR220L krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ACTiSYS ACT-IR220L bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ACTiSYS ACT-IR220L kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ACTiSYS ACT-IR220L . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
