Gebruiksaanwijzing /service van het product IVMD 1.0 van de fabrikant Bosch Appliances
Ga naar pagina of 44
IVMD 1.0 Intelligent Video Motion Detection en Configuration Instructions.
Copyright This manual is copyright protected by Bosch Security Systems. All rights reserved. No part of this document may be reproduced or t ransmitted for any purpose, by whatever method and by whatever means, electronically or mechanically, without the express writt en permission of Bosch Security Systems.
IVMD | Configuration instructions T able of Cont ents | en 1 BOSCH Security Syst ems 1.0 | 2006.04 T able of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Requirements . . . . . . . . . . . .
2 en | T able of Cont ents IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems.
IVMD | Configuration instructions Introducti on | en 3 BOSCH Security Syst ems 1.0 | 2006.04 1 Introduction IVMD (Intelligent Video Motion Detection) is a software algorithm that detects movements of objects within an environ- ment monitored by a video came ra and generates alarm events that can be processed further in a CCTV system.
4 en | Introduction IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems.
IVMD | Configuration instructions Requirements | en 5 BOSCH Security Syst ems 1.0 | 2006.04 2 Requir ements You will need the Configuration Manager software to configure IVMD. This must be installed on a Windows PC that can commu- nicate with the respective device over a network.
6 en | Requirements IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 2.1.1 Requesting the Activation Key 3. Connect to the Internet on a PC and open this page in a Web browser: – https://activation.boschsecurity.com/ (this page always appears in English) You will see the BOSCH Security Systems License Man- ager .
IVMD | Configuration instructions Requirements | en 7 BOSCH Security Syst ems 1.0 | 2006.04 9. If you h ave clic ked the Email Activation Key link, you will see a dialog in which you can enter two e-mail addres ses for recipients. 10. Open the Web browser vi ew of the device again.
8 en | Requirements IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems If the image co nsists to a certain extent of nothing but moving objects – in other words if objects cannot be distinguished from each other or from the background – the motion of an indi- vidual object cannot be detect ed (e.
IVMD | Configuration instructions Configuration | en 9 BOSCH Security Syst ems 1.0 | 2006.04 3 Configuration IVMD can only be configured with the Configuration Manager. The Configuration Manager can be installed on any Windows PC. 1. Start the Configuration Manager.
10 en | Configuration IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 3.1 VCA tab (Video content analy sis) The camera image appears on the right.
IVMD | Configuration instructions Configuration | en 11 BOSCH Security Syst ems 1.0 | 2006.04 Alarm state This field shows whether IVMD has generated an alarm event with the current settings. Object markings Objects that generate an alarm event under the current settings appear on the camera image inside a red outline.
12 en | Configuration IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems.
IVMD | Configuration instructions Area settings | en 13 BOSCH Security Syst ems 1.0 | 2006.04 4 Area settings 4.1 The basics The camera 'sees' a selected are a that is displayed as a single, constantly refreshed image. Objects Objects are typically people or ve hicles moving within the area seen by the camera.
14 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems Calibration If you wish to filter out objects according to their size or speed, for each camera position a link must be made between the size of the real-life situation and the dimensions as they appear on the camera image.
IVMD | Configuration instructions Area settings | en 15 BOSCH Security Syst ems 1.0 | 2006.04 4.2 The Area settings windo w If you have previously reset all the settings to their defaults, the Area se.
16 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 4.2.1 Detector field Detector fields are displayed as framed areas with a grid pat- tern.
IVMD | Configuration instructions Area settings | en 17 BOSCH Security Syst ems 1.0 | 2006.04 Moving the mouse cursor over a node highlights it more brightly: – You can reposition th e node using drag&drop. – You can delete the node using the context menu.
18 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 4.2.2 Detector field context menu Overview of commands: Cut Deletes the detector field – the field is copied to the clipboard and can be inserted again if required.
IVMD | Configuration instructions Area settings | en 19 BOSCH Security Syst ems 1.0 | 2006.04 4.2.3 Area sett ings contex t menu This context menu appears in the Area settings window when you right click outside a detect or field in the camera image .
20 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems Global Settings Here you can specify a minimum and maxi- mum size for all object s that will generate an alarm event. Objects that are smaller or larger than the specified sizes will be ignored an d this will save computing power as a result.
IVMD | Configuration instructions Area settings | en 21 BOSCH Security Syst ems 1.0 | 2006.04 4.3 Calibration Calibration is only necessary if you want the speed and size of detected objects to be interpre ted correctly. You do not need to perform this step if you d o no t want objects to be filtered on the basis of these two properties.
22 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems Position one of the red cubes ov er an object that you wish to trigger an alarm event. Adjust the cube to the size of this object. The second cube changes its size to suit the selected perspec- tive.
IVMD | Configuration instructions Area settings | en 23 BOSCH Security Syst ems 1.0 | 2006.04 4.3.1 Adjusting the calibration plane This section provides an overview of the ways in which the cali- bration plane can be adjusted.
24 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems The calibration mode also provid es a context menu with the fol- lowing commands: Anchor point Corner of a cube The size of both cubes changes – both cubes always represent the same size.
IVMD | Configuration instructions Area settings | en 25 BOSCH Security Syst ems 1.0 | 2006.04 4.3.2 Viewing and editing calibration settings The context menu for the calibrati on mode allows you to view the current calibration settings.
26 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems Roll angle: The angle by which the calibration plane is tilted.
IVMD | Configuration instructions Area settings | en 27 BOSCH Security Syst ems 1.0 | 2006.04 The pixel pitch is obtained by di viding the image sensor size by the number of pixels. For se nsors with 596 pixels, for example, this gives: 1/2 inch: 5.95 mm/596 = 0.
28 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 4.4 Proper ties of a detect o r field The Properties of Detector Field dialog is opened from the context menu of the Area setti ngs window (refer to page 19).
IVMD | Configuration instructions Area settings | en 29 BOSCH Security Syst ems 1.0 | 2006.04 Objects cannot be detected a ccording to their properties unless the system has been calibrated for the current c amera position ( Section 4.3 Calibration , page 21).
30 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems Trigger Mode: An alarm event is generated when... Entering .
IVMD | Configuration instructions Area settings | en 31 BOSCH Security Syst ems 1.0 | 2006.04 Object direction filter Off Objects are not fi ltered according to their direction of movement On Objects will only generate an alarm event when they move in the selected direction.
32 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems If you have activated Direction under Show in the context menu of the Area settings window (see page 19), .
IVMD | Configuration instructions Area settings | en 33 BOSCH Security Syst ems 1.0 | 2006.04 An object motion filter (if set) is shown by additional moving white (maximum limit) and yellow (minimum limit) squares being displayed inside the direction indicato r.
34 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems You will find all of the commands in the context menu. Examples of areas that could be defined as non-sensitive: – Railroad: Passing trains can trigger unwanted motion alarms.
IVMD | Configuration instructions Area settings | en 35 BOSCH Security Syst ems 1.0 | 2006.04 The following commands are available: Save and Exit Editor The settings are saved. Yo u exit the Editor for the sensitive area. Undo The last action you carried out is undone.
36 en | Area settings IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 4.6 Statistics The statistics for a detector field he lp you to refine the filter cri- teria for objects.
IVMD | Configuration instructions Area settings | en 37 BOSCH Security Syst ems 1.0 | 2006.04 (see page 28). Areas that are ou tside the defined limits are grayed. The lines indicate the number of objects for which the respec- tive value was detected.
38 en | Display of Measurements IVMD | Configuration instructions 1.0 | 2006.04 BOSCH Security Syst ems 5 Displa y of Measurements When you are working with the E nglish software interface, mea- surements can be displayed ac cording to the imperial system.
IVMD | Configuration instructions Contact and Service | en 39 BOSCH Security Syst ems 1.0 | 2006.04 6 Contact and Ser vice Contact address Bosch Sicherheitssysteme GmbH Robert-Koch-Straße 100 85521 Ottobrunn Germany E-mail: de.securitysystems@bosch.com Internet: www.
40 en | Contact and Servic e IVMD | Configuration instru ctions 1.0 | 2006.04 BOSCH Security Syst ems Service and support If you have any questions about the programs from the VIDOS Pro Suite, you can find further information on the Internet at: www.vidos.
IVMD | Configuration instructions | en 41 BOSCH Security Syst ems 1.0 | 2006.04 Inde x A Analysis type 10 Anchor point calibration 23 C Calibration plane 23 Contact address 39 Cube calibration 24 Cube.
Bosch Sicherheitssysteme GmbH Robert-Koch-Straße 100 85521 Ottobrunn Germany Telephone +4 9 (0) 89 6290-0 Fax +49 (0) 89 6290-1020 www.bosch-securitysystems.
Een belangrijk punt na aankoop van elk apparaat Bosch Appliances IVMD 1.0 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bosch Appliances IVMD 1.0 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bosch Appliances IVMD 1.0 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bosch Appliances IVMD 1.0 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bosch Appliances IVMD 1.0 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bosch Appliances IVMD 1.0 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bosch Appliances IVMD 1.0 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bosch Appliances IVMD 1.0 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
