Gebruiksaanwijzing /service van het product X20 van de fabrikant Bosch Appliances
Ga naar pagina of 130
VideoJet X20 Network Video Server en Installation and Operating Manual.
.
Vid eoJ e t X2 0 T able of Content s | en 3 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 T able of Contents 1P r e f a c e 7 1.1 About this Manual 7 1.2 Conventions in this Manual 7 1.3 Intended Use 7 1.4 EU Directives 8 1.
4 en | T able of Content s Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.19 Recording Profiles 56 5.20 Recording Scheduler 58 5.21 Alarm Sources 60 5.22 Alarm Connections 61 5.23 VCA 64 5.24 Alarm E-Mail 69 5.
Vid eoJ et X20 T able of Contents | en 5 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 10 Specifications 123 10.1 Unit 123 10.
6 en | T able of Content s Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems.
Vid eoJ et X20 Preface | en 7 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 1 Preface 1.1 About this Manual This manual is intended for persons responsible for the ins tallation and operation of the VideoJet X20. International, national and any re gional electrical engineering regulations must be followed at all times.
8 en | Preface Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 1.4 EU Directiv es The VideoJet X20 network video server complies with the requirements of EU Directives 89/336 (Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).
Vid eoJ et X20 S afe ty I nfo r m at i o n | e n 9 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 2 Safety Inf ormation 2.1 Electric Shock Hazard – Never attempt to connect the unit to any po wer network other than the type for which it is intended.
10 en | Safety Inf or mation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems.
Vid eoJ et X20 Product Descrip tion | en 11 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 3 Product De scription 3.1 Scope of Deliver y – VideoJet X20 network video server.
12 en | Product Descrip tion Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 3.2 Syst e m Requirements 3.2.1 General Requirements – Computer with Windows 20.
Vid eoJ et X20 Product Descrip tion | en 13 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 3.3 Over view of F unctions 3.3.1 Network Video Server The VideoJet X20 is a compact network video serv er for two connected video sources.
14 en | Product Descrip tion Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 3.3.7 Remote Control For remote control of external units such as pan or tilt heads for cameras or motorized zoom lenses, control data is transmitted via the VideoJet X20's bidirectional serial interface.
Vid eoJ et X20 Product Descrip tion | en 15 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 3.3.13 Summary The VideoJet X20 offers the following main functions: – Video and .
16 en | Product Descrip tion Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 3.4 Connections on the F ront Panel 1U S B 1 / 2 interfaces for future expansion .
Vid eoJ et X20 Product Descrip tion | en 17 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 3.5 Connections on the Rear Panel 8E T H 1 RJ45 socket for connecting to an Etherne.
18 en | Product Descrip tion Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems.
Vid eoJ et X20 Installation | en 19 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 4 Installation 4.1 Preparations The VideoJet X20 features industrial standard eq uipment and is therefore suitable for both stationary installation and mobil e installation in vehicles.
20 en | Installation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 4.3 Connections 4.3.1 Cameras You can connect two video sources to the Vide oJet X20. Any cameras and other video sources that produce a standard PAL or NTSC signal are suitable.
Vid eoJ et X20 Installation | en 21 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 4.3.4 SFP Slot You can establish an additional network connecti on by inserting a mini-GBIC module into the SFP slot for example via fiber optic cables (OF).
22 en | Installation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 4.3.7 Data Interface The bidirectional data interface is used to co ntrol units connected to the VideoJet X20, for example a dome camera with motorized lens.
Vid eoJ et X20 Installation | en 23 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 4.3.9 Relay Outputs The VideoJet X20 has four relay outputs for swit ching external units su ch as lamps or alarm sirens. You can operate these relay outputs manually while there is an active connection to the VideoJet X20.
24 en | Installation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 4.3.11 Backup Power Supply When used in mobile vehicles (for example pu blic transport), the VideoJet X20 is usually switched on when the vehicle is started with the ignition key.
Vid eoJ et X20 Installation | en 25 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 4. 4 Power O n/ Powe r O f f 4.4.1 Power Supply The VideoJet X20 does not have a power swit ch. Power is supplied via a separate unit. Connect the VideoJet X20 to the power supply unit and plug this into the mains.
26 en | Installation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 4.5.2 Configuring the VideoJet X20 You can start the Configuration Mana ger immediately after installation. 1. Double-click the icon on the desktop or star t the program via the Start menu.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 27 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5 Configur ation Using a W eb Brow ser 5.1 Connecting The integrated HTTP server in the VideoJet X20 o ffers you the option of configuring the unit over the network with a Web browser.
28 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.1.3 Establishing the Connection The VideoJet X20 must be assigned a vali d IP address to operate on your network. The following default address is preset at the factory: 192.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 29 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.1.5 Protected VideoJet X20 If the VideoJet X20 is password protecte.
30 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.2.1 Starting Configuration X Click the SETTINGS link in the upper section of th e window. The Web browser opens a new page with the configuration menu.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 31 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.3 Identification 5.
32 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.5 Display Stamping Various overlays or "stamps" in the video imag e provide important supplementary information.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 33 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.5.4 Alarm message Enter the message to be displayed in the image in the event of an alarm. The maximum text length is 31 characters.
34 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.6 Password A VideoJet X20 is generally protec ted by a password to preven t unauthorized access to the unit. You can use different authorization levels ( User name ) to limit access.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 35 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.7 L anguage 5.7.1 Website language Select the language for the user interface here. 5.8 Date/Time 5.8.1 Date format Select your required date format.
36 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.9.1 Unit time zone Select the time zone in wh ich your system is located. 5.9.2 Daylight saving time The internal clock can switch automatically be tween normal and daylight saving time (DST).
Vid eoJ et X20 Configuration Using a Web Brow ser | en 37 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.10 Picture Settings You can set the video image of each camera to suit your requirements. The current video image is displayed in the small window next to the slide controls as confirmation.
38 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.11 Encoder Profile For encoding the video signal you can select two profiles for each encoder (video input) and change the presets for the profiles.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 39 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.11.1 Active profile Here you can select the desired profile for each of the two streams. You will see a preview for each data stream in the right section of the wi ndow.
40 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.12 Profile Configuration You can change individual parameter values wi thin a profile and you can also change the name.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 41 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.12.2 Target data rate You can limit the data rate for the VideoJet X20 to optimize utilization of the bandwidth in your network.
42 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.12.8 I-frame distance This parameter allows you to set the intervals in which the I-frames will be coded. 0 means auto mode, whereby the video server insert s I-frames as necessary.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 43 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.13 Video Input You can activate the 75 Ohm terminating resistan ce for each video input on the VideoJet X20. The terminating resistance must be deactivate d for the video signal to be looped through.
44 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.14 Audio You can set the gain of the audi o signals to suit your specific requirements.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 45 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.15 JPEG Posting You can save individual JPEG images on an FT P server at specific intervals. You can then retrieve these images at a later date to reconstruct alarm events if required.
46 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.15.3 Posting interval Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if you do not want any images to be sent.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 47 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.16 St orage Medium You can record the images from the cameras co nnected to the VideoJet X20 on various local storage media or on an appropri ately configured iSCSI system.
48 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.17 iSCSI If you select type iSCSI system as the storage medium, you then need to set up a connection to the desired iSCSI system and set the configuration parameters.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 49 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.17.2 iSCSI LUN Map The LUN map displays the logical drives configured for the iSCSI system. The current user is displayed for each drive.
50 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.17.9 Decoupling the Drive in Use Each drive can only be associated with one user . If a drive is already being used by another user, you can decouple the user and co nnect the drive with the VideoJet X20.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 51 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.18 Par titioning Two partitions can be set up for recordings of the cameras connected to the VideoJet X20; this is similar to the partitioning often found on computer hard drives.
52 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.18.1 Creating a Partition Creating a new partition is performed usin g separate windows in which information is presented to you and you are led step by step through the necessary settings.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 53 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.18.2 Saving Changes After you have made all necessary settings, you mu st transfer the settings to the unit and save them.
54 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.18.4 Editing a Partition You can modify the configuration of a partition at any time. You can perform the required modifications in the Partition Properties window.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 55 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.18.8 Number of alarm tracks The unit uses a special recording mode .
56 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.19 Recording Profiles You can define up to ten different recordin g profiles.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 57 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.19.1 Standard profile From this field, you can select the encoder prof ile to be used for continuous recording (see Section 5.
58 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.20 Recording Sche duler The recording scheduler allows you to link the created recording profiles with the days and times at which the images of selected cameras ar e to be recorded in the event of an alarm.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 59 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.20.1 Holidays You can define holidays that are not in the stan dard weekly schedule on which recordings are to apply.
60 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.21 Alarm Source s You can configure the alarm inputs of the VideoJet X20. 5.21.1 Alarm input Select Active high if the alarm is to be triggere d by closing the contact.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 61 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.22 Alarm Connections You can select how the VideoJet X20 responds to an alarm. In the event of an alarm, the unit can automatically connect to a pre-defined IP a ddress.
62 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.22.4 Destination password If the remote station is password protected, enter the password here.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 63 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.22.9 SSL encryption The data for the connection, for example the pass word, can be securely transmitted with SSL encryption.
64 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.23 VC A The VideoJet X20 features an integrated video co ntent analysis (VCA), which can detect and analyze changes in the signal.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 65 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.23.1 Analysis Select the option On to activate the video content analysis. As soon as the video content analysis is activated, metadata are created.
66 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.23.4 Sensitivity (MOTION+ only) The basic sensitivity of the motion detector can be adjusted for the environmental conditions to which the camera is subject.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 67 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.23.9 Trigger delay (s) You can set delayed alarm triggering. The alarm is only triggered after a set time interval in seconds has elapsed and then only if the tri ggering condition still exists.
68 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.23.16 Select area You can select the image areas in the refere nce image that are to be monitored. The video image is subdivided into 858 square fields.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 69 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.24 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. In this way it is possible to notify a recipient who does not have a video receiver.
70 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.24.6 Attach JPEG from camera Click the checkbox to specify the cameras f rom which JPEG images are sent. An enabled video input is indicated by a check mark.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 71 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.25 Alarm T ask Editor As an alternative to the alarm settings on the various alarm pages, you can enter your desired alarm functions in script form here.
72 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.26 Rela y Set tings You can configure the switching behavior of the re lay outputs. For each relay, you can specify an open switch relay (normally closed contact) or a closed switch relay (normally open contact).
Vid eoJ et X20 Configuration Using a Web Brow ser | en 73 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.26.3 Relay follows If required, select a specific ev ent that will trigger the relay.
74 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.27 COM1 You can configure the serial interface para meters (orange terminal block) to meet your requirements. 5.27.1 Serial port function Select a controllable unit from the list.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 75 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.27.2 Camera ID If necessary, enter the ID of the peripheral yo u wish to control (for example a dome camera or pan/tilt head).
76 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.28 Netw ork The settings in this screen are used to inte grate the VideoJet X20 into an existing network.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 77 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 1. Make the desired changes. 2. Click the Set button. 3. Click a Reboot link to trigger a reboot. VideoJ et X20 is rebooted and the changed settings are activated.
78 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.28.7 HTTPS browser port If you wish to allow browser access on the ne twork via a secure connection, select an HTTPS browser port from the list if necessary.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 79 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.28.14 SNMP The VideoJet X20 supports the SNMP V2 (S imple Network Management Protocol) for managing and monitoring network components, an d can send SNMP messages (traps) to IP addresses.
80 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.29 Multicasting In addition to a 1:1 connecti on between an encoder and a single receiver (unicast), the VideoJet X20 can enable multiple receivers to receive the video signal from an encoder simultaneously.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 81 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.29.1 Multicast address video 1 / Multicast address video 2 Enter a .
82 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.30 Encr yption A special license, with which you will receive a corresponding activation key, is required to encrypt user data.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 83 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.30.1 Encryption 1. From the Encryption list field, select the On option to activate the encryption. Keys will then be generated for all data channels.
84 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.31 V ersion Information The data on this page are for information pu rposes only and cannot be changed. Keep a record of this information in case technical assistance is required.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 85 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.32 L ivepage Configuration In this window you can customize the appearance of the LIVEPAGE to suit your requirements. You can opt to have selected information and controls displayed in addition to the video image.
86 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 1. Check the box for the items that are to be displayed on the LIVEPAGE . The selected items are indicated by a check mark.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 87 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.32.9 JPEG size You can choose between two given image sizes to display the M-JPEG image. 5.32.10 JPEG interval You can specify the interval at which the individual images should be generated for the M-JPEG image.
88 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.33 Syst em State The storage devices used by VideoJet X20 are monitored.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 89 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.35 Maintenance 5.35.1 Firmware The VideoJet X20 is designed in such a way that its functions and parameters can be updated with firmware.
90 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 5.35.2 Configuration You can save configuration data for the VideoJet X20 on a computer and then load saved configuration data from a computer to the unit.
Vid eoJ et X20 Configuration Using a Web Brow ser | en 91 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 5.36 F unction Te st The VideoJet X20 offers a variety of configuration options. You should therefore check that it is functioning correctly after installation and configuration.
92 en | Configuration Using a Web Brow ser Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems.
Vid eoJ et X20 Operation | en 93 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6 Operation 6.1 Operation with Microsoft Internet Explorer A computer with Microsoft Internet Explorer (v ersion 6.
94 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.1.3 Establishing the Connection The VideoJet X20 must be assigned a vali d IP address to operate on your network. The following default address is preset at the factory: 192.
Vid eoJ et X20 Operation | en 95 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.2 The LIVEP A GE Once the connection is establishe d, the Web browser displays the LIVEPAGE . It displays the live video image on the right of the browser window.
96 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.2.5 View Control Control options for peripherals (for example a pa n/tilt camera head or dome camera) depend on the type of unit installed and on the VideoJet X20's configuration.
Vid eoJ et X20 Operation | en 97 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.2.8 System Log / Event Log The System Log field contains information about the op erating status of the VideoJet X20 and the connection. You can save these mess ages automatically in a file (see Section 5.
98 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.3 Saving Snapsho ts You can save individual images from the video sequence currently shown on the LIVEPAGE in JPEG format on your computer's hard drive.
Vid eoJ et X20 Operation | en 99 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.5 Running Recording Program The hard drive icon below the camera images on the LIVEPAGE changes during an automatic recording. A moving graphic will appear to in dicate a running recording.
100 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.6 The RECORDINGS Page The RECORDINGS page for playing back recorded vide o sequences can be accessed from the LIVEPAGE and from the SETTINGS menu.
Vid eoJ et X20 Operation | en 101 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.6.2 Controlling a Playback You will see a time bar below the video image f or quick orientation. If a particular sequence has been clicked and selected for playback, the se lected sequence appears in the list in blue.
102 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.6.4 Slide Control You can use the slide control to control playba ck speed and fast forward/rewind: positioning in the middle indicates playback at recording speed, left indicates rewind, and right fast forward.
Vid eoJ et X20 Operation | en 103 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.7 Backup You can back up the video sequences or single images saved on the storage medium of the VideoJet X20 to the computer's hard drive.
104 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.8 Installing the Play er You can play back saved vide o sequences using the Player from Bosch Security Systems, which can be found on the product CD supplied (see Section 3.
Vid eoJ et X20 Operation | en 105 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.9 Hardware Connections Betwe en V ideo Ser vers You can easily connect a VideoJet X20 with .
106 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 6.9.4 Connecting with a Terminal Program Various requirements must be met in order to operate with a terminal program (see Section 8.8 Communication with Terminal Program , page 117).
Vid eoJ et X20 Operation | en 107 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 6.10 Operation Using Software Decoders The VideoJet X20 video server combines with VIDOS to provide a high-performance system solution.
108 en | Operation Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems.
Vid eoJ et X20 Maintenance and Upgrades | en 109 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 7 Maintenance and Upgrades 7.1 Te sting the Netw ork Connection You can use the ping command to check the connection between two IP addresses.
110 en | Maintenance and Upgrades Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 7.3 Repairs Ensure that all maintenance or repair work is carried out only by qualified personnel (electrical engineers or network technology spec ialists).
Vid eoJ et X20 Appendix | en 111 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 8 Appendix 8.1 T roubleshooting If you are unable to resolve a malfunction, please contact your supplier or system integrator or go directly to Bosch Securi ty Systems Customer Service.
112 en | Appendix Video Je t X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 8.2 G eneral Malfunctions Malfunction Possible causes Recommended solution No connection between the unit and terminal program. Incorrect cable connections.
Vid eoJ et X20 Appendix | en 113 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 8.3 Malfunctions with iSCSI Connections The unit does not report an alarm. Alarm source is not selected. Select possible alarm sources on the Alarm Sources configuration page.
114 en | Appendix Video Je t X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 8.4 LEDs The VideoJet X20 network video server has a number of LEDs on its front and rear panels that show the operating status and can give indications of possible malfunctions: 8.
Vid eoJ et X20 Appendix | en 115 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 8.5 Processor L oad If the VideoJet X20 is accessed via the Web browser, you will see the processor load indicators in the top left of the wind ow next to the manufacturer's logo.
116 en | Appendix Video Je t X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 8.7 Terminal Block The terminal block has several contacts for: – 4 alarm inputs – 4 relay outputs – Serial data transmission 8.
Vid eoJ et X20 Appendix | en 117 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 8.8 Communication with Terminal Program 8.8.1 Data Terminal If a VideoJet X20 cannot be found .
118 en | Appendix Video Je t X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 8.8.4 Assigning an IP Address To use a VideoJet X20 in your network, you must assign it an IP address that is valid for your network. The following default address is preset at the factory: 192.
Vid eoJ et X20 Glossary | en 119 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 9 Glossar y Symbols 10/100 Base-T IEEE-802.3 specification for 10 or 100 Mbps Ethernet 802.1x The IEEE 802.1x standard provides a general method for authentication and authorization in IEEE-802 networks.
120 en | Glossar y Vide oJet X 20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems HTTPS Hypertext Transfer Protocol Secure: encryp ts and authenticates communication between.
Vid eoJ et X20 Glossary | en 121 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 N Net mask A mask that explains which part of an IP address is the network address and which part is the host address. It is usually written in dotte d decimal notation, for example "255.
122 en | Glossar y Vide oJet X 20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems T TCP Transfer Control Protocol Telnet Login protocol with which users can acce ss a remote computer (Host) on the Internet TLS Transport Layer Security; TLS 1.
Vid eoJ et X20 Specifications | en 123 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 10 Specifications 10.1 Unit Operating voltage 10 to 30 V DC, power supply via external unit Power consumption Approx.
124 en | Specifications Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems 10.2 Prot ocols/Standards Video standards PAL, NTSC Video coding protocols MPEG-4, M-JPEG, JPEG Video data rate 9.
Vid eoJ et X20 Index | en 125 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 11 Inde x A Activating the recording 59 Activation key 88 Actuator 22 Alarm 17 , 32 , 96 Alarm e-.
126 en | Index Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems Licenses 88 Linear mode 54 , 55 Live video images 27 , 93 Livepage 85 Low Voltage Directive 8 L.
Vid eoJ et X20 Index | en 127 Bosch Security Syst ems Installation and Operating Manual V3.5 | 2007.12 TCP 62 , 77 Terminal 74 Termination 43 Test 91 Time 24 , 32 , 35 Time server 35 Time server IP ad.
128 en | Index Vid eoJ et X20 V3.5 | 2007.12 Installati on and Operating Manual Bosc h Security Syst ems.
.
Bosch Security Systems Robert-Koch-Straße 100 D-85521 Ottobrunn Germany Telefon 089 6290-0 Fax 089 6290-1020 www.bosch-securitysystems.com © Bosch Security Systems, 2007.
Een belangrijk punt na aankoop van elk apparaat Bosch Appliances X20 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Bosch Appliances X20 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Bosch Appliances X20 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Bosch Appliances X20 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Bosch Appliances X20 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Bosch Appliances X20 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Bosch Appliances X20 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Bosch Appliances X20 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.