Gebruiksaanwijzing /service van het product 12K300 van de fabrikant Briggs & Stratton
Ga naar pagina of 16
Document: - page 1 (Black) Screen angle and frequency: 45.0000, 150.0000 Operating & Maintenance Instructions Model 12K300 Intek E Series for Pump applications covered in this manual FORM NO. 276797-1/06 PRINTED IN U.S.A. Copyright 2006 by Briggs & Stratton Corporation www .
Document: - page 2 (Black) Screen angle and frequency: 45.0000, 150.0000 2 Safety References The safety alert symbol ( ) is used to identify safety information about hazards that can result in personal injury . A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential severity of injury .
Document: - page 3 (Black) Screen angle and frequency: 45.0000, 150.0000 3 Engine Features 1. Engine Identification Model T ype Code 2. Spark Plug 3 . Oil Fill 4. Oil Drain 5. Stop Switch 6. Star ter Handle 7. Air Cleaner 8. Choke Contr ol 9. Kerosene T ank 10.
Document: - page 4 (Black) Screen angle and frequency: 45.0000, 150.0000 4 Operator Safety Kerosene and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death. WHEN ADDING FUEL Turn engine OFF and let engine cool at least 2 minutes before removing fuel cap.
Document: - page 5 (Black) Screen angle and frequency: 45.0000, 150.0000 5 Allow muf fler , engine cylinder and fins to cool before touching. Remove accumulated combustibles from muffler area and cylinder area.
Document: - page 6 (Black) Screen angle and frequency: 45.0000, 150.0000 6 Oil Recommendation Use a high quality detergent oil classified “For Service SF , SG, SH, SJ” or higher . Do not use special additives. Determine best grade for use by temperature during operation, see chart.
Document: - page 7 (Black) Screen angle and frequency: 45.0000, 150.0000 7 Fuel Recommendation Kerosene Use clean, fresh kerosene. Fr esh kerosene prevent s gum fr om formi ng in the fuel system or on essential carbur etor part s. Pur chase kerosene in quantit y that can be used within 30 days.
Document: - page 8 (Black) Screen angle and frequency: 45.0000, 150.0000 8 Starting Engine 1. Check oil level. 2. Fill kerosene tank with kerosene. 3. Fill petrol tank with petrol per the equipment manufacturer’ s instructions. 4. Move CHOKE to choke position (A).
Document: - page 9 (Black) Screen angle and frequency: 45.0000, 150.0000 9 Operation Do not tip engine or equipment at angle which causes kerosene or petrol to spill. The manufacturer of the equipment on which this engine is installed specifies top speed at which the engine will be operated.
Document: - page 10 (Black) Screen angle and frequency: 45.0000, 150.0000 10 Engine Specifications Operation of this engine is for the application it was intended for . All the components used to build this engine assembly must remain in place for the proper operation of this engine.
Document: - page 11 (Black) Screen angle and frequency: 45.0000, 150.0000 11 Engine Maintenance Regular maintenance will improve the performance and extend the life of the engine. See any Authorized Briggs & Stratton Dealer for service. Use only genuine Briggs & Stratton parts.
Document: - page 12 (Black) Screen angle and frequency: 45.0000, 150.0000 12 Changing Oil Change oil after first 5 to 8 hours of use , then every 50 hours. Change oil every 25 hours when operating the engine under heavy load or in high temperatures. 1.
Document: - page 13 (Black) Screen angle and frequency: 45.0000, 150.0000 13 Cleaning Debris Daily or before every use, clean accumulated debris from engine. Keep linkage, spring and controls clean. Keep area behind and around muffler free of any combustible debris.
Document: - page 14 (Black) Screen angle and frequency: 45.0000, 150.0000 14 Storage Kerosene and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or death.
Document: - page 15 (Black) Screen angle and frequency: 45.0000, 150.0000 15 W arranty Effective January 1, 2006 replaces all undated W arranties and all Warranties dated before January 1, 2006.
Document: - page 16 (Black) Screen angle and frequency: 45.0000, 150.0000 16 About Y our Engine W arranty Briggs & Stratton welcomes warranty repair and apologizes to you for being inconvenienced. Any Authorized Service Dealer may perform warranty repairs.
Een belangrijk punt na aankoop van elk apparaat Briggs & Stratton 12K300 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Briggs & Stratton 12K300 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Briggs & Stratton 12K300 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Briggs & Stratton 12K300 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Briggs & Stratton 12K300 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Briggs & Stratton 12K300 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Briggs & Stratton 12K300 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Briggs & Stratton 12K300 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
